arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "skeleton.dtsi"
  14 #include "imx28-pinfunc.h"
  15
  16 / {
  17         interrupt-parent = <&icoll>;
  18
  19         aliases {
  20                 ethernet0 = &mac0;
  21                 ethernet1 = &mac1;
  22                 gpio0 = &gpio0;
  23                 gpio1 = &gpio1;
  24                 gpio2 = &gpio2;
  25                 gpio3 = &gpio3;
  26                 gpio4 = &gpio4;
  27                 saif0 = &saif0;
  28                 saif1 = &saif1;
  29                 serial0 = &auart0;
  30                 serial1 = &auart1;
  31                 serial2 = &auart2;
  32                 serial3 = &auart3;
  33                 serial4 = &auart4;
  34                 spi0 = &ssp1;
  35                 spi1 = &ssp2;
  36                 usbphy0 = &usbphy0;
  37                 usbphy1 = &usbphy1;
  38         };
  39
  40         cpus {
  41                 #address-cells = <0>;
  42                 #size-cells = <0>;
  43
  44                 cpu {
  45                         compatible = "arm,arm926ej-s";
  46                         device_type = "cpu";
  47                 };
  48         };
  49
  50         apb@80000000 {
  51                 compatible = "simple-bus";
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 reg = <0x80000000 0x80000>;
  55                 ranges;
  56
  57                 apbh@80000000 {
  58                         compatible = "simple-bus";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61                         reg = <0x80000000 0x3c900>;
  62                         ranges;
  63
  64                         icoll: interrupt-controller@80000000 {
  65                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  66                                 interrupt-controller;
  67                                 #interrupt-cells = <1>;
  68                                 reg = <0x80000000 0x2000>;
  69                         };
  70
  71                         hsadc: hsadc@80002000 {
  72                                 reg = <0x80002000 0x2000>;
  73                                 interrupts = <13>;
  74                                 dmas = <&dma_apbh 12>;
  75                                 dma-names = "rx";
  76                                 status = "disabled";
  77                         };
  78
  79                         dma_apbh: dma-apbh@80004000 {
  80                                 compatible = "fsl,imx28-dma-apbh";
  81                                 reg = <0x80004000 0x2000>;
  82                                 interrupts = <82 83 84 85
  83                                               88 88 88 88
  84                                               88 88 88 88
  85                                               87 86 0 0>;
  86                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  87                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  88                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  89                                                   "hsadc", "lcdif", "empty", "empty";
  90                                 #dma-cells = <1>;
  91                                 dma-channels = <16>;
  92                                 clocks = <&clks 25>;
  93                         };
  94
  95                         perfmon: perfmon@80006000 {
  96                                 reg = <0x80006000 0x800>;
  97                                 interrupts = <27>;
  98                                 status = "disabled";
  99                         };
 100
 101                         gpmi: gpmi-nand@8000c000 {
 102                                 compatible = "fsl,imx28-gpmi-nand";
 103                                 #address-cells = <1>;
 104                                 #size-cells = <1>;
 105                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 106                                 reg-names = "gpmi-nand", "bch";
 107                                 interrupts = <41>;
 108                                 interrupt-names = "bch";
 109                                 clocks = <&clks 50>;
 110                                 clock-names = "gpmi_io";
 111                                 dmas = <&dma_apbh 4>;
 112                                 dma-names = "rx-tx";
 113                                 status = "disabled";
 114                         };
 115
 116                         ssp0: ssp@80010000 {
 117                                 #address-cells = <1>;
 118                                 #size-cells = <0>;
 119                                 reg = <0x80010000 0x2000>;
 120                                 interrupts = <96>;
 121                                 clocks = <&clks 46>;
 122                                 dmas = <&dma_apbh 0>;
 123                                 dma-names = "rx-tx";
 124                                 status = "disabled";
 125                         };
 126
 127                         ssp1: ssp@80012000 {
 128                                 #address-cells = <1>;
 129                                 #size-cells = <0>;
 130                                 reg = <0x80012000 0x2000>;
 131                                 interrupts = <97>;
 132                                 clocks = <&clks 47>;
 133                                 dmas = <&dma_apbh 1>;
 134                                 dma-names = "rx-tx";
 135                                 status = "disabled";
 136                         };
 137
 138                         ssp2: ssp@80014000 {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141                                 reg = <0x80014000 0x2000>;
 142                                 interrupts = <98>;
 143                                 clocks = <&clks 48>;
 144                                 dmas = <&dma_apbh 2>;
 145                                 dma-names = "rx-tx";
 146                                 status = "disabled";
 147                         };
 148
 149                         ssp3: ssp@80016000 {
 150                                 #address-cells = <1>;
 151                                 #size-cells = <0>;
 152                                 reg = <0x80016000 0x2000>;
 153                                 interrupts = <99>;
 154                                 clocks = <&clks 49>;
 155                                 dmas = <&dma_apbh 3>;
 156                                 dma-names = "rx-tx";
 157                                 status = "disabled";
 158                         };
 159
 160                         pinctrl: pinctrl@80018000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 164                                 reg = <0x80018000 0x2000>;
 165
 166                                 gpio0: gpio@0 {
 167                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 168                                         interrupts = <127>;
 169                                         gpio-controller;
 170                                         #gpio-cells = <2>;
 171                                         interrupt-controller;
 172                                         #interrupt-cells = <2>;
 173                                 };
 174
 175                                 gpio1: gpio@1 {
 176                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 177                                         interrupts = <126>;
 178                                         gpio-controller;
 179                                         #gpio-cells = <2>;
 180                                         interrupt-controller;
 181                                         #interrupt-cells = <2>;
 182                                 };
 183
 184                                 gpio2: gpio@2 {
 185                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 186                                         interrupts = <125>;
 187                                         gpio-controller;
 188                                         #gpio-cells = <2>;
 189                                         interrupt-controller;
 190                                         #interrupt-cells = <2>;
 191                                 };
 192
 193                                 gpio3: gpio@3 {
 194                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 195                                         interrupts = <124>;
 196                                         gpio-controller;
 197                                         #gpio-cells = <2>;
 198                                         interrupt-controller;
 199                                         #interrupt-cells = <2>;
 200                                 };
 201
 202                                 gpio4: gpio@4 {
 203                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 204                                         interrupts = <123>;
 205                                         gpio-controller;
 206                                         #gpio-cells = <2>;
 207                                         interrupt-controller;
 208                                         #interrupt-cells = <2>;
 209                                 };
 210
 211                                 duart_pins_a: duart@0 {
 212                                         reg = <0>;
 213                                         fsl,pinmux-ids = <
 214                                                 MX28_PAD_PWM0__DUART_RX
 215                                                 MX28_PAD_PWM1__DUART_TX
 216                                         >;
 217                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 218                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 219                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 220                                 };
 221
 222                                 duart_pins_b: duart@1 {
 223                                         reg = <1>;
 224                                         fsl,pinmux-ids = <
 225                                                 MX28_PAD_AUART0_CTS__DUART_RX
 226                                                 MX28_PAD_AUART0_RTS__DUART_TX
 227                                         >;
 228                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 229                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 230                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 231                                 };
 232
 233                                 duart_4pins_a: duart-4pins@0 {
 234                                         reg = <0>;
 235                                         fsl,pinmux-ids = <
 236                                                 MX28_PAD_AUART0_CTS__DUART_RX
 237                                                 MX28_PAD_AUART0_RTS__DUART_TX
 238                                                 MX28_PAD_AUART0_RX__DUART_CTS
 239                                                 MX28_PAD_AUART0_TX__DUART_RTS
 240                                         >;
 241                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 242                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 243                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 244                                 };
 245
 246                                 gpmi_pins_a: gpmi-nand@0 {
 247                                         reg = <0>;
 248                                         fsl,pinmux-ids = <
 249                                                 MX28_PAD_GPMI_D00__GPMI_D0
 250                                                 MX28_PAD_GPMI_D01__GPMI_D1
 251                                                 MX28_PAD_GPMI_D02__GPMI_D2
 252                                                 MX28_PAD_GPMI_D03__GPMI_D3
 253                                                 MX28_PAD_GPMI_D04__GPMI_D4
 254                                                 MX28_PAD_GPMI_D05__GPMI_D5
 255                                                 MX28_PAD_GPMI_D06__GPMI_D6
 256                                                 MX28_PAD_GPMI_D07__GPMI_D7
 257                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 258                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 259                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 260                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 261                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 262                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 263                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 264                                         >;
 265                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 266                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 267                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 268                                 };
 269
 270                                 gpmi_status_cfg: gpmi-status-cfg {
 271                                         fsl,pinmux-ids = <
 272                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 273                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 274                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 275                                         >;
 276                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 277                                 };
 278
 279                                 auart0_pins_a: auart0@0 {
 280                                         reg = <0>;
 281                                         fsl,pinmux-ids = <
 282                                                 MX28_PAD_AUART0_RX__AUART0_RX
 283                                                 MX28_PAD_AUART0_TX__AUART0_TX
 284                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 285                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 286                                         >;
 287                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 288                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 289                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 290                                 };
 291
 292                                 auart0_2pins_a: auart0-2pins@0 {
 293                                         reg = <0>;
 294                                         fsl,pinmux-ids = <
 295                                                 MX28_PAD_AUART0_RX__AUART0_RX
 296                                                 MX28_PAD_AUART0_TX__AUART0_TX
 297                                         >;
 298                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 299                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 300                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 301                                 };
 302
 303                                 auart1_pins_a: auart1@0 {
 304                                         reg = <0>;
 305                                         fsl,pinmux-ids = <
 306                                                 MX28_PAD_AUART1_RX__AUART1_RX
 307                                                 MX28_PAD_AUART1_TX__AUART1_TX
 308                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 309                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 310                                         >;
 311                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 312                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 313                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 314                                 };
 315
 316                                 auart1_2pins_a: auart1-2pins@0 {
 317                                         reg = <0>;
 318                                         fsl,pinmux-ids = <
 319                                                 MX28_PAD_AUART1_RX__AUART1_RX
 320                                                 MX28_PAD_AUART1_TX__AUART1_TX
 321                                         >;
 322                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 323                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 324                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 325                                 };
 326
 327                                 auart2_2pins_a: auart2-2pins@0 {
 328                                         reg = <0>;
 329                                         fsl,pinmux-ids = <
 330                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 331                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 332                                         >;
 333                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 334                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 335                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 336                                 };
 337
 338                                 auart2_2pins_b: auart2-2pins@1 {
 339                                         reg = <1>;
 340                                         fsl,pinmux-ids = <
 341                                                 MX28_PAD_AUART2_RX__AUART2_RX
 342                                                 MX28_PAD_AUART2_TX__AUART2_TX
 343                                         >;
 344                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 345                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 346                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 347                                 };
 348
 349                                 auart2_pins_a: auart2-pins@0 {
 350                                         reg = <0>;
 351                                         fsl,pinmux-ids = <
 352                                                 MX28_PAD_AUART2_RX__AUART2_RX
 353                                                 MX28_PAD_AUART2_TX__AUART2_TX
 354                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 355                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 356                                         >;
 357                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 358                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 359                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 360                                 };
 361
 362                                 auart3_pins_a: auart3@0 {
 363                                         reg = <0>;
 364                                         fsl,pinmux-ids = <
 365                                                 MX28_PAD_AUART3_RX__AUART3_RX
 366                                                 MX28_PAD_AUART3_TX__AUART3_TX
 367                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 368                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 369                                         >;
 370                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 371                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 372                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 373                                 };
 374
 375                                 auart3_2pins_a: auart3-2pins@0 {
 376                                         reg = <0>;
 377                                         fsl,pinmux-ids = <
 378                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 379                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 380                                         >;
 381                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 382                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 383                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 384                                 };
 385
 386                                 auart3_2pins_b: auart3-2pins@1 {
 387                                         reg = <1>;
 388                                         fsl,pinmux-ids = <
 389                                                 MX28_PAD_AUART3_RX__AUART3_RX
 390                                                 MX28_PAD_AUART3_TX__AUART3_TX
 391                                         >;
 392                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 393                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 394                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 395                                 };
 396
 397                                 auart4_2pins_a: auart4@0 {
 398                                         reg = <0>;
 399                                         fsl,pinmux-ids = <
 400                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 401                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 402                                         >;
 403                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 404                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 405                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 406                                 };
 407
 408                                 auart4_2pins_b: auart4@1 {
 409                                         reg = <1>;
 410                                         fsl,pinmux-ids = <
 411                                                 MX28_PAD_AUART0_CTS__AUART4_RX
 412                                                 MX28_PAD_AUART0_RTS__AUART4_TX
 413                                         >;
 414                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 415                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 416                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 417                                 };
 418
 419                                 mac0_pins_a: mac0@0 {
 420                                         reg = <0>;
 421                                         fsl,pinmux-ids = <
 422                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 423                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 424                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 425                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 426                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 427                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 428                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 429                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 430                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 431                                         >;
 432                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 433                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 434                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 435                                 };
 436
 437                                 mac0_pins_b: mac0@1 {
 438                                         reg = <1>;
 439                                         fsl,pinmux-ids = <
 440                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 441                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 442                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 443                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 444                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 445                                                 MX28_PAD_ENET0_RXD2__ENET0_RXD2
 446                                                 MX28_PAD_ENET0_RXD3__ENET0_RXD3
 447                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 448                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 449                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 450                                                 MX28_PAD_ENET0_TXD2__ENET0_TXD2
 451                                                 MX28_PAD_ENET0_TXD3__ENET0_TXD3
 452                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 453                                                 MX28_PAD_ENET0_COL__ENET0_COL
 454                                                 MX28_PAD_ENET0_CRS__ENET0_CRS
 455                                                 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
 456                                                 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
 457                                                 >;
 458                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 459                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 460                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 461                                 };
 462
 463                                 mac1_pins_a: mac1@0 {
 464                                         reg = <0>;
 465                                         fsl,pinmux-ids = <
 466                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 467                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 468                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 469                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 470                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 471                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 472                                         >;
 473                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 474                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 475                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 476                                 };
 477
 478                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 479                                         reg = <0>;
 480                                         fsl,pinmux-ids = <
 481                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 482                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 483                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 484                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 485                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 486                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 487                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 488                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 489                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 490                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 491                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 492                                         >;
 493                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 494                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 495                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 496                                 };
 497
 498                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 499                                         reg = <0>;
 500                                         fsl,pinmux-ids = <
 501                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 502                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 503                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 504                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 505                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 506                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 507                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 508                                         >;
 509                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 510                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 511                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 512                                 };
 513
 514                                 mmc0_cd_cfg: mmc0-cd-cfg {
 515                                         fsl,pinmux-ids = <
 516                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 517                                         >;
 518                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 519                                 };
 520
 521                                 mmc0_sck_cfg: mmc0-sck-cfg {
 522                                         fsl,pinmux-ids = <
 523                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 524                                         >;
 525                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 526                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 527                                 };
 528
 529                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
 530                                         reg = <0>;
 531                                         fsl,pinmux-ids = <
 532                                                 MX28_PAD_GPMI_D00__SSP1_D0
 533                                                 MX28_PAD_GPMI_D01__SSP1_D1
 534                                                 MX28_PAD_GPMI_D02__SSP1_D2
 535                                                 MX28_PAD_GPMI_D03__SSP1_D3
 536                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
 537                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 538                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 539                                         >;
 540                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 541                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 542                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 543                                 };
 544
 545                                 mmc1_cd_cfg: mmc1-cd-cfg {
 546                                         fsl,pinmux-ids = <
 547                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 548                                         >;
 549                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 550                                 };
 551
 552                                 mmc1_sck_cfg: mmc1-sck-cfg {
 553                                         fsl,pinmux-ids = <
 554                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 555                                         >;
 556                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 557                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 558                                 };
 559
 560
 561                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 562                                         reg = <0>;
 563                                         fsl,pinmux-ids = <
 564                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 565                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 566                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 567                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 568                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 569                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 570                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 571                                         >;
 572                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 573                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 574                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 575                                 };
 576
 577                                 mmc2_cd_cfg: mmc2-cd-cfg {
 578                                         fsl,pinmux-ids = <
 579                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 580                                         >;
 581                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 582                                 };
 583
 584                                 mmc2_sck_cfg: mmc2-sck-cfg {
 585                                         fsl,pinmux-ids = <
 586                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 587                                         >;
 588                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 589                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 590                                 };
 591
 592                                 i2c0_pins_a: i2c0@0 {
 593                                         reg = <0>;
 594                                         fsl,pinmux-ids = <
 595                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 596                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 597                                         >;
 598                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 599                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 600                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 601                                 };
 602
 603                                 i2c0_pins_b: i2c0@1 {
 604                                         reg = <1>;
 605                                         fsl,pinmux-ids = <
 606                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 607                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 608                                         >;
 609                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 610                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 611                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 612                                 };
 613
 614                                 i2c1_pins_a: i2c1@0 {
 615                                         reg = <0>;
 616                                         fsl,pinmux-ids = <
 617                                                 MX28_PAD_PWM0__I2C1_SCL
 618                                                 MX28_PAD_PWM1__I2C1_SDA
 619                                         >;
 620                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 621                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 622                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 623                                 };
 624
 625                                 i2c1_pins_b: i2c1@1 {
 626                                         reg = <1>;
 627                                         fsl,pinmux-ids = <
 628                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
 629                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
 630                                         >;
 631                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 632                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 633                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 634                                 };
 635
 636                                 saif0_pins_a: saif0@0 {
 637                                         reg = <0>;
 638                                         fsl,pinmux-ids = <
 639                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 640                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 641                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 642                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 643                                         >;
 644                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 645                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 646                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 647                                 };
 648
 649                                 saif0_pins_b: saif0@1 {
 650                                         reg = <1>;
 651                                         fsl,pinmux-ids = <
 652                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 653                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 654                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 655                                         >;
 656                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 657                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 658                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 659                                 };
 660
 661                                 saif1_pins_a: saif1@0 {
 662                                         reg = <0>;
 663                                         fsl,pinmux-ids = <
 664                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 665                                         >;
 666                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 667                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 668                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 669                                 };
 670
 671                                 pwm0_pins_a: pwm0@0 {
 672                                         reg = <0>;
 673                                         fsl,pinmux-ids = <
 674                                                 MX28_PAD_PWM0__PWM_0
 675                                         >;
 676                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 677                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 678                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 679                                 };
 680
 681                                 pwm2_pins_a: pwm2@0 {
 682                                         reg = <0>;
 683                                         fsl,pinmux-ids = <
 684                                                 MX28_PAD_PWM2__PWM_2
 685                                         >;
 686                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 687                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 688                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 689                                 };
 690
 691                                 pwm3_pins_a: pwm3@0 {
 692                                         reg = <0>;
 693                                         fsl,pinmux-ids = <
 694                                                 MX28_PAD_PWM3__PWM_3
 695                                         >;
 696                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 697                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 698                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 699                                 };
 700
 701                                 pwm3_pins_b: pwm3@1 {
 702                                         reg = <1>;
 703                                         fsl,pinmux-ids = <
 704                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 705                                         >;
 706                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 707                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 708                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 709                                 };
 710
 711                                 pwm4_pins_a: pwm4@0 {
 712                                         reg = <0>;
 713                                         fsl,pinmux-ids = <
 714                                                 MX28_PAD_PWM4__PWM_4
 715                                         >;
 716                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 717                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 718                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 719                                 };
 720
 721                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 722                                         reg = <0>;
 723                                         fsl,pinmux-ids = <
 724                                                 MX28_PAD_LCD_D00__LCD_D0
 725                                                 MX28_PAD_LCD_D01__LCD_D1
 726                                                 MX28_PAD_LCD_D02__LCD_D2
 727                                                 MX28_PAD_LCD_D03__LCD_D3
 728                                                 MX28_PAD_LCD_D04__LCD_D4
 729                                                 MX28_PAD_LCD_D05__LCD_D5
 730                                                 MX28_PAD_LCD_D06__LCD_D6
 731                                                 MX28_PAD_LCD_D07__LCD_D7
 732                                                 MX28_PAD_LCD_D08__LCD_D8
 733                                                 MX28_PAD_LCD_D09__LCD_D9
 734                                                 MX28_PAD_LCD_D10__LCD_D10
 735                                                 MX28_PAD_LCD_D11__LCD_D11
 736                                                 MX28_PAD_LCD_D12__LCD_D12
 737                                                 MX28_PAD_LCD_D13__LCD_D13
 738                                                 MX28_PAD_LCD_D14__LCD_D14
 739                                                 MX28_PAD_LCD_D15__LCD_D15
 740                                                 MX28_PAD_LCD_D16__LCD_D16
 741                                                 MX28_PAD_LCD_D17__LCD_D17
 742                                                 MX28_PAD_LCD_D18__LCD_D18
 743                                                 MX28_PAD_LCD_D19__LCD_D19
 744                                                 MX28_PAD_LCD_D20__LCD_D20
 745                                                 MX28_PAD_LCD_D21__LCD_D21
 746                                                 MX28_PAD_LCD_D22__LCD_D22
 747                                                 MX28_PAD_LCD_D23__LCD_D23
 748                                         >;
 749                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 750                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 751                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 752                                 };
 753
 754                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 755                                         reg = <0>;
 756                                         fsl,pinmux-ids = <
 757                                                 MX28_PAD_LCD_D00__LCD_D0
 758                                                 MX28_PAD_LCD_D01__LCD_D1
 759                                                 MX28_PAD_LCD_D02__LCD_D2
 760                                                 MX28_PAD_LCD_D03__LCD_D3
 761                                                 MX28_PAD_LCD_D04__LCD_D4
 762                                                 MX28_PAD_LCD_D05__LCD_D5
 763                                                 MX28_PAD_LCD_D06__LCD_D6
 764                                                 MX28_PAD_LCD_D07__LCD_D7
 765                                                 MX28_PAD_LCD_D08__LCD_D8
 766                                                 MX28_PAD_LCD_D09__LCD_D9
 767                                                 MX28_PAD_LCD_D10__LCD_D10
 768                                                 MX28_PAD_LCD_D11__LCD_D11
 769                                                 MX28_PAD_LCD_D12__LCD_D12
 770                                                 MX28_PAD_LCD_D13__LCD_D13
 771                                                 MX28_PAD_LCD_D14__LCD_D14
 772                                                 MX28_PAD_LCD_D15__LCD_D15
 773                                                 MX28_PAD_LCD_D16__LCD_D16
 774                                                 MX28_PAD_LCD_D17__LCD_D17
 775                                         >;
 776                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 777                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 778                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 779                                 };
 780
 781                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 782                                         reg = <0>;
 783                                         fsl,pinmux-ids = <
 784                                                 MX28_PAD_LCD_D00__LCD_D0
 785                                                 MX28_PAD_LCD_D01__LCD_D1
 786                                                 MX28_PAD_LCD_D02__LCD_D2
 787                                                 MX28_PAD_LCD_D03__LCD_D3
 788                                                 MX28_PAD_LCD_D04__LCD_D4
 789                                                 MX28_PAD_LCD_D05__LCD_D5
 790                                                 MX28_PAD_LCD_D06__LCD_D6
 791                                                 MX28_PAD_LCD_D07__LCD_D7
 792                                                 MX28_PAD_LCD_D08__LCD_D8
 793                                                 MX28_PAD_LCD_D09__LCD_D9
 794                                                 MX28_PAD_LCD_D10__LCD_D10
 795                                                 MX28_PAD_LCD_D11__LCD_D11
 796                                                 MX28_PAD_LCD_D12__LCD_D12
 797                                                 MX28_PAD_LCD_D13__LCD_D13
 798                                                 MX28_PAD_LCD_D14__LCD_D14
 799                                                 MX28_PAD_LCD_D15__LCD_D15
 800                                         >;
 801                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 802                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 803                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 804                                 };
 805
 806                                 lcdif_sync_pins_a: lcdif-sync@0 {
 807                                         reg = <0>;
 808                                         fsl,pinmux-ids = <
 809                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 810                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 811                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 812                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 813                                         >;
 814                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 815                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 816                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 817                                 };
 818
 819                                 can0_pins_a: can0@0 {
 820                                         reg = <0>;
 821                                         fsl,pinmux-ids = <
 822                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 823                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 824                                         >;
 825                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 826                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 827                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 828                                 };
 829
 830                                 can1_pins_a: can1@0 {
 831                                         reg = <0>;
 832                                         fsl,pinmux-ids = <
 833                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 834                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 835                                         >;
 836                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 837                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 838                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 839                                 };
 840
 841                                 spi2_pins_a: spi2@0 {
 842                                         reg = <0>;
 843                                         fsl,pinmux-ids = <
 844                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 845                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 846                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 847                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 848                                         >;
 849                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 850                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 851                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 852                                 };
 853
 854                                 spi3_pins_a: spi3@0 {
 855                                         reg = <0>;
 856                                         fsl,pinmux-ids = <
 857                                                 MX28_PAD_AUART2_RX__SSP3_D4
 858                                                 MX28_PAD_AUART2_TX__SSP3_D5
 859                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 860                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 861                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 862                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 863                                         >;
 864                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 865                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 866                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 867                                 };
 868
 869                                 spi3_pins_b: spi3@1 {
 870                                         reg = <1>;
 871                                         fsl,pinmux-ids = <
 872                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 873                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 874                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 875                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 876                                         >;
 877                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 878                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 879                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 880                                 };
 881
 882                                 usb0_pins_a: usb0@0 {
 883                                         reg = <0>;
 884                                         fsl,pinmux-ids = <
 885                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 886                                         >;
 887                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 888                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 889                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 890                                 };
 891
 892                                 usb0_pins_b: usb0@1 {
 893                                         reg = <1>;
 894                                         fsl,pinmux-ids = <
 895                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 896                                         >;
 897                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 898                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 899                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 900                                 };
 901
 902                                 usb1_pins_a: usb1@0 {
 903                                         reg = <0>;
 904                                         fsl,pinmux-ids = <
 905                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 906                                         >;
 907                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 908                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 909                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 910                                 };
 911
 912                                 usb0_id_pins_a: usb0id@0 {
 913                                         reg = <0>;
 914                                         fsl,pinmux-ids = <
 915                                                 MX28_PAD_AUART1_RTS__USB0_ID
 916                                         >;
 917                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 918                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 919                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 920                                 };
 921
 922                                 usb0_id_pins_b: usb0id1@0 {
 923                                         reg = <0>;
 924                                         fsl,pinmux-ids = <
 925                                                 MX28_PAD_PWM2__USB0_ID
 926                                         >;
 927                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 928                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 929                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 930                                 };
 931
 932                         };
 933
 934                         digctl: digctl@8001c000 {
 935                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 936                                 reg = <0x8001c000 0x2000>;
 937                                 interrupts = <89>;
 938                                 status = "disabled";
 939                         };
 940
 941                         etm: etm@80022000 {
 942                                 reg = <0x80022000 0x2000>;
 943                                 status = "disabled";
 944                         };
 945
 946                         dma_apbx: dma-apbx@80024000 {
 947                                 compatible = "fsl,imx28-dma-apbx";
 948                                 reg = <0x80024000 0x2000>;
 949                                 interrupts = <78 79 66 0
 950                                               80 81 68 69
 951                                               70 71 72 73
 952                                               74 75 76 77>;
 953                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 954                                                   "saif0", "saif1", "i2c0", "i2c1",
 955                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 956                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 957                                 #dma-cells = <1>;
 958                                 dma-channels = <16>;
 959                                 clocks = <&clks 26>;
 960                         };
 961
 962                         dcp: dcp@80028000 {
 963                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 964                                 reg = <0x80028000 0x2000>;
 965                                 interrupts = <52 53 54>;
 966                                 status = "okay";
 967                         };
 968
 969                         pxp: pxp@8002a000 {
 970                                 reg = <0x8002a000 0x2000>;
 971                                 interrupts = <39>;
 972                                 status = "disabled";
 973                         };
 974
 975                         ocotp: ocotp@8002c000 {
 976                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
 977                                 #address-cells = <1>;
 978                                 #size-cells = <1>;
 979                                 reg = <0x8002c000 0x2000>;
 980                                 clocks = <&clks 25>;
 981                         };
 982
 983                         axi-ahb@8002e000 {
 984                                 reg = <0x8002e000 0x2000>;
 985                                 status = "disabled";
 986                         };
 987
 988                         lcdif: lcdif@80030000 {
 989                                 compatible = "fsl,imx28-lcdif";
 990                                 reg = <0x80030000 0x2000>;
 991                                 interrupts = <38>;
 992                                 clocks = <&clks 55>;
 993                                 dmas = <&dma_apbh 13>;
 994                                 dma-names = "rx";
 995                                 status = "disabled";
 996                         };
 997
 998                         can0: can@80032000 {
 999                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
1000                                 reg = <0x80032000 0x2000>;
1001                                 interrupts = <8>;
1002                                 clocks = <&clks 58>, <&clks 58>;
1003                                 clock-names = "ipg", "per";
1004                                 status = "disabled";
1005                         };
1006
1007                         can1: can@80034000 {
1008                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
1009                                 reg = <0x80034000 0x2000>;
1010                                 interrupts = <9>;
1011                                 clocks = <&clks 59>, <&clks 59>;
1012                                 clock-names = "ipg", "per";
1013                                 status = "disabled";
1014                         };
1015
1016                         simdbg: simdbg@8003c000 {
1017                                 reg = <0x8003c000 0x200>;
1018                                 status = "disabled";
1019                         };
1020
1021                         simgpmisel: simgpmisel@8003c200 {
1022                                 reg = <0x8003c200 0x100>;
1023                                 status = "disabled";
1024                         };
1025
1026                         simsspsel: simsspsel@8003c300 {
1027                                 reg = <0x8003c300 0x100>;
1028                                 status = "disabled";
1029                         };
1030
1031                         simmemsel: simmemsel@8003c400 {
1032                                 reg = <0x8003c400 0x100>;
1033                                 status = "disabled";
1034                         };
1035
1036                         gpiomon: gpiomon@8003c500 {
1037                                 reg = <0x8003c500 0x100>;
1038                                 status = "disabled";
1039                         };
1040
1041                         simenet: simenet@8003c700 {
1042                                 reg = <0x8003c700 0x100>;
1043                                 status = "disabled";
1044                         };
1045
1046                         armjtag: armjtag@8003c800 {
1047                                 reg = <0x8003c800 0x100>;
1048                                 status = "disabled";
1049                         };
1050                 };
1051
1052                 apbx@80040000 {
1053                         compatible = "simple-bus";
1054                         #address-cells = <1>;
1055                         #size-cells = <1>;
1056                         reg = <0x80040000 0x40000>;
1057                         ranges;
1058
1059                         clks: clkctrl@80040000 {
1060                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1061                                 reg = <0x80040000 0x2000>;
1062                                 #clock-cells = <1>;
1063                         };
1064
1065                         saif0: saif@80042000 {
1066                                 compatible = "fsl,imx28-saif";
1067                                 reg = <0x80042000 0x2000>;
1068                                 interrupts = <59>;
1069                                 #clock-cells = <0>;
1070                                 clocks = <&clks 53>;
1071                                 dmas = <&dma_apbx 4>;
1072                                 dma-names = "rx-tx";
1073                                 status = "disabled";
1074                         };
1075
1076                         power: power@80044000 {
1077                                 reg = <0x80044000 0x2000>;
1078                                 status = "disabled";
1079                         };
1080
1081                         saif1: saif@80046000 {
1082                                 compatible = "fsl,imx28-saif";
1083                                 reg = <0x80046000 0x2000>;
1084                                 interrupts = <58>;
1085                                 clocks = <&clks 54>;
1086                                 dmas = <&dma_apbx 5>;
1087                                 dma-names = "rx-tx";
1088                                 status = "disabled";
1089                         };
1090
1091                         lradc: lradc@80050000 {
1092                                 compatible = "fsl,imx28-lradc";
1093                                 reg = <0x80050000 0x2000>;
1094                                 interrupts = <10 14 15 16 17 18 19
1095                                                 20 21 22 23 24 25>;
1096                                 status = "disabled";
1097                                 clocks = <&clks 41>;
1098                                 #io-channel-cells = <1>;
1099                         };
1100
1101                         spdif: spdif@80054000 {
1102                                 reg = <0x80054000 0x2000>;
1103                                 interrupts = <45>;
1104                                 dmas = <&dma_apbx 2>;
1105                                 dma-names = "tx";
1106                                 status = "disabled";
1107                         };
1108
1109                         mxs_rtc: rtc@80056000 {
1110                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1111                                 reg = <0x80056000 0x2000>;
1112                                 interrupts = <29>;
1113                         };
1114
1115                         i2c0: i2c@80058000 {
1116                                 #address-cells = <1>;
1117                                 #size-cells = <0>;
1118                                 compatible = "fsl,imx28-i2c";
1119                                 reg = <0x80058000 0x2000>;
1120                                 interrupts = <111>;
1121                                 clock-frequency = <100000>;
1122                                 dmas = <&dma_apbx 6>;
1123                                 dma-names = "rx-tx";
1124                                 status = "disabled";
1125                         };
1126
1127                         i2c1: i2c@8005a000 {
1128                                 #address-cells = <1>;
1129                                 #size-cells = <0>;
1130                                 compatible = "fsl,imx28-i2c";
1131                                 reg = <0x8005a000 0x2000>;
1132                                 interrupts = <110>;
1133                                 clock-frequency = <100000>;
1134                                 dmas = <&dma_apbx 7>;
1135                                 dma-names = "rx-tx";
1136                                 status = "disabled";
1137                         };
1138
1139                         pwm: pwm@80064000 {
1140                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1141                                 reg = <0x80064000 0x2000>;
1142                                 clocks = <&clks 44>;
1143                                 #pwm-cells = <2>;
1144                                 fsl,pwm-number = <8>;
1145                                 status = "disabled";
1146                         };
1147
1148                         timer: timrot@80068000 {
1149                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1150                                 reg = <0x80068000 0x2000>;
1151                                 interrupts = <48 49 50 51>;
1152                                 clocks = <&clks 26>;
1153                         };
1154
1155                         auart0: serial@8006a000 {
1156                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1157                                 reg = <0x8006a000 0x2000>;
1158                                 interrupts = <112>;
1159                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1160                                 dma-names = "rx", "tx";
1161                                 clocks = <&clks 45>;
1162                                 status = "disabled";
1163                         };
1164
1165                         auart1: serial@8006c000 {
1166                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1167                                 reg = <0x8006c000 0x2000>;
1168                                 interrupts = <113>;
1169                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1170                                 dma-names = "rx", "tx";
1171                                 clocks = <&clks 45>;
1172                                 status = "disabled";
1173                         };
1174
1175                         auart2: serial@8006e000 {
1176                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1177                                 reg = <0x8006e000 0x2000>;
1178                                 interrupts = <114>;
1179                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1180                                 dma-names = "rx", "tx";
1181                                 clocks = <&clks 45>;
1182                                 status = "disabled";
1183                         };
1184
1185                         auart3: serial@80070000 {
1186                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1187                                 reg = <0x80070000 0x2000>;
1188                                 interrupts = <115>;
1189                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1190                                 dma-names = "rx", "tx";
1191                                 clocks = <&clks 45>;
1192                                 status = "disabled";
1193                         };
1194
1195                         auart4: serial@80072000 {
1196                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1197                                 reg = <0x80072000 0x2000>;
1198                                 interrupts = <116>;
1199                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1200                                 dma-names = "rx", "tx";
1201                                 clocks = <&clks 45>;
1202                                 status = "disabled";
1203                         };
1204
1205                         duart: serial@80074000 {
1206                                 compatible = "arm,pl011", "arm,primecell";
1207                                 reg = <0x80074000 0x1000>;
1208                                 interrupts = <47>;
1209                                 clocks = <&clks 45>, <&clks 26>;
1210                                 clock-names = "uart", "apb_pclk";
1211                                 status = "disabled";
1212                         };
1213
1214                         usbphy0: usbphy@8007c000 {
1215                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1216                                 reg = <0x8007c000 0x2000>;
1217                                 clocks = <&clks 62>;
1218                                 status = "disabled";
1219                         };
1220
1221                         usbphy1: usbphy@8007e000 {
1222                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1223                                 reg = <0x8007e000 0x2000>;
1224                                 clocks = <&clks 63>;
1225                                 status = "disabled";
1226                         };
1227                 };
1228         };
1229
1230         ahb@80080000 {
1231                 compatible = "simple-bus";
1232                 #address-cells = <1>;
1233                 #size-cells = <1>;
1234                 reg = <0x80080000 0x80000>;
1235                 ranges;
1236
1237                 usb0: usb@80080000 {
1238                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1239                         reg = <0x80080000 0x10000>;
1240                         interrupts = <93>;
1241                         clocks = <&clks 60>;
1242                         fsl,usbphy = <&usbphy0>;
1243                         status = "disabled";
1244                 };
1245
1246                 usb1: usb@80090000 {
1247                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1248                         reg = <0x80090000 0x10000>;
1249                         interrupts = <92>;
1250                         clocks = <&clks 61>;
1251                         fsl,usbphy = <&usbphy1>;
1252                         dr_mode = "host";
1253                         status = "disabled";
1254                 };
1255
1256                 dflpt: dflpt@800c0000 {
1257                         reg = <0x800c0000 0x10000>;
1258                         status = "disabled";
1259                 };
1260
1261                 mac0: ethernet@800f0000 {
1262                         compatible = "fsl,imx28-fec";
1263                         reg = <0x800f0000 0x4000>;
1264                         interrupts = <101>;
1265                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1266                         clock-names = "ipg", "ahb", "enet_out";
1267                         status = "disabled";
1268                 };
1269
1270                 mac1: ethernet@800f4000 {
1271                         compatible = "fsl,imx28-fec";
1272                         reg = <0x800f4000 0x4000>;
1273                         interrupts = <102>;
1274                         clocks = <&clks 57>, <&clks 57>;
1275                         clock-names = "ipg", "ahb";
1276                         status = "disabled";
1277                 };
1278
1279                 etn_switch: switch@800f8000 {
1280                         reg = <0x800f8000 0x8000>;
1281                         status = "disabled";
1282                 };
1283         };
1284
1285         iio-hwmon {
1286                 compatible = "iio-hwmon";
1287                 io-channels = <&lradc 8>;
1288         };
1289 };