arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

   1 /*
   2  * Copyright 2013 Data Modul AG
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include "imx6q.dtsi"
  16
  17 / {
  18         model = "Data Modul eDM-QMX6 Board";
  19         compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
  20
  21         aliases {
  22                 gpio7 = &stmpe_gpio1;
  23                 gpio8 = &stmpe_gpio2;
  24                 stmpe-i2c0 = &stmpe1;
  25                 stmpe-i2c1 = &stmpe2;
  26         };
  27
  28         memory {
  29                 reg = <0x10000000 0x80000000>;
  30         };
  31
  32         regulators {
  33                 compatible = "simple-bus";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 reg_3p3v: regulator@0 {
  38                         compatible = "regulator-fixed";
  39                         reg = <0>;
  40                         regulator-name = "3P3V";
  41                         regulator-min-microvolt = <3300000>;
  42                         regulator-max-microvolt = <3300000>;
  43                         regulator-always-on;
  44                 };
  45
  46                 reg_usb_otg_switch: regulator@1 {
  47                         compatible = "regulator-fixed";
  48                         reg = <1>;
  49                         regulator-name = "usb_otg_switch";
  50                         regulator-min-microvolt = <5000000>;
  51                         regulator-max-microvolt = <5000000>;
  52                         gpio = <&gpio7 12 0>;
  53                         regulator-boot-on;
  54                         regulator-always-on;
  55                 };
  56
  57                 reg_usb_host1: regulator@2 {
  58                         compatible = "regulator-fixed";
  59                         reg = <2>;
  60                         regulator-name = "usb_host1_en";
  61                         regulator-min-microvolt = <3300000>;
  62                         regulator-max-microvolt = <3300000>;
  63                         gpio = <&gpio3 31 0>;
  64                         enable-active-high;
  65                 };
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70
  71                 led-blue {
  72                         label = "blue";
  73                         gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
  74                         linux,default-trigger = "heartbeat";
  75                 };
  76
  77                 led-green {
  78                         label = "green";
  79                         gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
  80                 };
  81
  82                 led-pink {
  83                         label = "pink";
  84                         gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
  85                 };
  86
  87                 led-red {
  88                         label = "red";
  89                         gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
  90                 };
  91         };
  92 };
  93
  94 &fec {
  95         pinctrl-names = "default";
  96         pinctrl-0 = <&pinctrl_enet>;
  97         phy-mode = "rgmii";
  98         phy-reset-gpios = <&gpio3 23 0>;
  99         phy-supply = <&vgen2_1v2_eth>;
 100         status = "okay";
 101 };
 102
 103 &i2c2 {
 104         clock-frequency = <100000>;
 105         pinctrl-names = "default";
 106         pinctrl-0 = <&pinctrl_i2c2
 107                      &pinctrl_stmpe1
 108                      &pinctrl_stmpe2>;
 109         status = "okay";
 110
 111         pmic: pfuze100@08 {
 112                 compatible = "fsl,pfuze100";
 113                 reg = <0x08>;
 114                 interrupt-parent = <&gpio3>;
 115                 interrupts = <20 8>;
 116
 117                 regulators {
 118                         sw1a_reg: sw1ab {
 119                                 regulator-min-microvolt = <300000>;
 120                                 regulator-max-microvolt = <1875000>;
 121                                 regulator-boot-on;
 122                                 regulator-always-on;
 123                         };
 124
 125                         sw1c_reg: sw1c {
 126                                 regulator-min-microvolt = <300000>;
 127                                 regulator-max-microvolt = <1875000>;
 128                                 regulator-boot-on;
 129                                 regulator-always-on;
 130                         };
 131
 132                         sw2_reg: sw2 {
 133                                 regulator-min-microvolt = <800000>;
 134                                 regulator-max-microvolt = <3300000>;
 135                                 regulator-boot-on;
 136                                 regulator-always-on;
 137                         };
 138
 139                         sw3a_reg: sw3a {
 140                                 regulator-min-microvolt = <400000>;
 141                                 regulator-max-microvolt = <1975000>;
 142                                 regulator-boot-on;
 143                                 regulator-always-on;
 144                         };
 145
 146                         sw3b_reg: sw3b {
 147                                 regulator-min-microvolt = <400000>;
 148                                 regulator-max-microvolt = <1975000>;
 149                                 regulator-boot-on;
 150                                 regulator-always-on;
 151                         };
 152
 153                         sw4_reg: sw4 {
 154                                 regulator-min-microvolt = <400000>;
 155                                 regulator-max-microvolt = <1975000>;
 156                                 regulator-always-on;
 157                         };
 158
 159                         swbst_reg: swbst {
 160                                 regulator-min-microvolt = <5000000>;
 161                                 regulator-max-microvolt = <5150000>;
 162                                 regulator-always-on;
 163                         };
 164
 165                         snvs_reg: vsnvs {
 166                                 regulator-min-microvolt = <1000000>;
 167                                 regulator-max-microvolt = <3000000>;
 168                                 regulator-boot-on;
 169                                 regulator-always-on;
 170                         };
 171
 172                         vref_reg: vrefddr {
 173                                 regulator-boot-on;
 174                                 regulator-always-on;
 175                         };
 176
 177                         vgen1_reg: vgen1 {
 178                                 regulator-min-microvolt = <800000>;
 179                                 regulator-max-microvolt = <1550000>;
 180                         };
 181
 182                         vgen2_1v2_eth: vgen2 {
 183                                 regulator-min-microvolt = <800000>;
 184                                 regulator-max-microvolt = <1550000>;
 185                         };
 186
 187                         vdd_high_in: vgen3 {
 188                                 regulator-min-microvolt = <1800000>;
 189                                 regulator-max-microvolt = <3300000>;
 190                                 regulator-boot-on;
 191                                 regulator-always-on;
 192                         };
 193
 194                         vgen4_reg: vgen4 {
 195                                 regulator-min-microvolt = <1800000>;
 196                                 regulator-max-microvolt = <3300000>;
 197                                 regulator-always-on;
 198                         };
 199
 200                         vgen5_reg: vgen5 {
 201                                 regulator-min-microvolt = <1800000>;
 202                                 regulator-max-microvolt = <3300000>;
 203                                 regulator-always-on;
 204                         };
 205
 206                         vgen6_reg: vgen6 {
 207                                 regulator-min-microvolt = <1800000>;
 208                                 regulator-max-microvolt = <3300000>;
 209                                 regulator-always-on;
 210                         };
 211                 };
 212         };
 213
 214         stmpe1: stmpe1601@40 {
 215                 compatible = "st,stmpe1601";
 216                 reg = <0x40>;
 217                 interrupts = <30 0>;
 218                 interrupt-parent = <&gpio3>;
 219
 220                 stmpe_gpio1: stmpe_gpio {
 221                         #gpio-cells = <2>;
 222                         compatible = "st,stmpe-gpio";
 223                 };
 224         };
 225
 226         stmpe2: stmpe1601@44 {
 227                 compatible = "st,stmpe1601";
 228                 reg = <0x44>;
 229                 interrupts = <2 0>;
 230                 interrupt-parent = <&gpio5>;
 231
 232                 stmpe_gpio2: stmpe_gpio {
 233                         #gpio-cells = <2>;
 234                         compatible = "st,stmpe-gpio";
 235                 };
 236         };
 237
 238         temp1: ad7414@4c {
 239                 compatible = "ad,ad7414";
 240                 reg = <0x4c>;
 241         };
 242
 243         temp2: ad7414@4d {
 244                 compatible = "ad,ad7414";
 245                 reg = <0x4d>;
 246         };
 247
 248         rtc: m41t62@68 {
 249                 compatible = "stm,m41t62";
 250                 reg = <0x68>;
 251         };
 252 };
 253
 254 &iomuxc {
 255         pinctrl-names = "default";
 256         pinctrl-0 = <&pinctrl_hog>;
 257
 258         imx6q-dmo-edmqmx6 {
 259                 pinctrl_hog: hoggrp {
 260                         fsl,pins = <
 261                                 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
 262                                 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 263                         >;
 264                 };
 265
 266                 pinctrl_enet: enetgrp {
 267                         fsl,pins = <
 268                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
 269                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
 270                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
 271                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
 272                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
 273                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
 274                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b0b0
 275                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b0b0
 276                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b0b0
 277                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b0b0
 278                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b0b0
 279                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
 280                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 281                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 282                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 283                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 284                         >;
 285                 };
 286
 287                 pinctrl_i2c2: i2c2grp {
 288                         fsl,pins = <
 289                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 290                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 291                         >;
 292                 };
 293
 294                 pinctrl_stmpe1: stmpe1grp {
 295                         fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
 296                 };
 297
 298                 pinctrl_stmpe2: stmpe2grp {
 299                         fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
 300                 };
 301
 302                 pinctrl_uart1: uart1grp {
 303                         fsl,pins = <
 304                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 305                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 306                         >;
 307                 };
 308
 309                 pinctrl_uart2: uart2grp {
 310                         fsl,pins = <
 311                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 312                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 313                         >;
 314                 };
 315
 316                 pinctrl_usbotg: usbotggrp {
 317                         fsl,pins = <
 318                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 319                         >;
 320                 };
 321
 322                 pinctrl_usdhc3: usdhc3grp {
 323                         fsl,pins = <
 324                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 325                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 326                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 327                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 328                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 329                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 330                         >;
 331                 };
 332
 333                 pinctrl_usdhc4: usdhc4grp {
 334                         fsl,pins = <
 335                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 336                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 337                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 338                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 339                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 340                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 341                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 342                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 343                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 344                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 345                         >;
 346                 };
 347         };
 348 };
 349
 350 &sata {
 351         status = "okay";
 352 };
 353
 354 &uart1 {
 355         pinctrl-names = "default";
 356         pinctrl-0 = <&pinctrl_uart1>;
 357         status = "okay";
 358 };
 359
 360 &uart2 {
 361         pinctrl-names = "default";
 362         pinctrl-0 = <&pinctrl_uart2>;
 363         status = "okay";
 364 };
 365
 366 &usbh1 {
 367         vbus-supply = <&reg_usb_host1>;
 368         disable-over-current;
 369         dr_mode = "host";
 370         status = "okay";
 371 };
 372
 373 &usbotg {
 374         pinctrl-names = "default";
 375         pinctrl-0 = <&pinctrl_usbotg>;
 376         disable-over-current;
 377         status = "okay";
 378 };
 379
 380 &usdhc3 {
 381         pinctrl-names = "default";
 382         pinctrl-0 = <&pinctrl_usdhc3>;
 383         vmmc-supply = <&reg_3p3v>;
 384         status = "okay";
 385 };
 386
 387 &usdhc4 {
 388         pinctrl-names = "default";
 389         pinctrl-0 = <&pinctrl_usdhc4>;
 390         vmmc-supply = <&reg_3p3v>;
 391         non-removable;
 392         bus-width = <8>;
 393         status = "okay";
 394 };