2 * Procedures for interfacing to Open Firmware.
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
19 #include <linux/kernel.h>
20 #include <linux/string.h>
21 #include <linux/init.h>
22 #include <linux/threads.h>
23 #include <linux/spinlock.h>
24 #include <linux/types.h>
25 #include <linux/pci.h>
26 #include <linux/proc_fs.h>
27 #include <linux/stringify.h>
28 #include <linux/delay.h>
29 #include <linux/initrd.h>
30 #include <linux/bitops.h>
34 #include <asm/processor.h>
39 #include <asm/pgtable.h>
40 #include <asm/iommu.h>
41 #include <asm/btext.h>
42 #include <asm/sections.h>
43 #include <asm/machdep.h>
45 #include <asm/asm-prototypes.h>
47 #include <linux/linux_logo.h>
50 * Eventually bump that one up
52 #define DEVTREE_CHUNK_SIZE 0x100000
55 * This is the size of the local memory reserve map that gets copied
56 * into the boot params passed to the kernel. That size is totally
57 * flexible as the kernel just reads the list until it encounters an
58 * entry with size 0, so it can be changed without breaking binary
61 #define MEM_RESERVE_MAP_SIZE 8
64 * prom_init() is called very early on, before the kernel text
65 * and data have been mapped to KERNELBASE. At this point the code
66 * is running at whatever address it has been loaded at.
67 * On ppc32 we compile with -mrelocatable, which means that references
68 * to extern and static variables get relocated automatically.
69 * ppc64 objects are always relocatable, we just need to relocate the
72 * Because OF may have mapped I/O devices into the area starting at
73 * KERNELBASE, particularly on CHRP machines, we can't safely call
74 * OF once the kernel has been mapped to KERNELBASE. Therefore all
75 * OF calls must be done within prom_init().
77 * ADDR is used in calls to call_prom. The 4th and following
78 * arguments to call_prom should be 32-bit values.
79 * On ppc64, 64 bit values are truncated to 32 bits (and
80 * fortunately don't get interpreted as two arguments).
82 #define ADDR(x) (u32)(unsigned long)(x)
85 #define OF_WORKAROUNDS 0
87 #define OF_WORKAROUNDS of_workarounds
91 #define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */
92 #define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */
94 #define PROM_BUG() do { \
95 prom_printf("kernel BUG at %s line 0x%x!\n", \
96 __FILE__, __LINE__); \
97 __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \
101 #define prom_debug(x...) prom_printf(x)
103 #define prom_debug(x...)
107 typedef u32 prom_arg_t;
125 struct mem_map_entry {
130 typedef __be32 cell_t;
132 extern void __start(unsigned long r3, unsigned long r4, unsigned long r5,
133 unsigned long r6, unsigned long r7, unsigned long r8,
137 extern int enter_prom(struct prom_args *args, unsigned long entry);
139 static inline int enter_prom(struct prom_args *args, unsigned long entry)
141 return ((int (*)(struct prom_args *))entry)(args);
145 extern void copy_and_flush(unsigned long dest, unsigned long src,
146 unsigned long size, unsigned long offset);
149 static struct prom_t __initdata prom;
151 static unsigned long prom_entry __initdata;
153 #define PROM_SCRATCH_SIZE 256
155 static char __initdata of_stdout_device[256];
156 static char __initdata prom_scratch[PROM_SCRATCH_SIZE];
158 static unsigned long __initdata dt_header_start;
159 static unsigned long __initdata dt_struct_start, dt_struct_end;
160 static unsigned long __initdata dt_string_start, dt_string_end;
162 static unsigned long __initdata prom_initrd_start, prom_initrd_end;
165 static int __initdata prom_iommu_force_on;
166 static int __initdata prom_iommu_off;
167 static unsigned long __initdata prom_tce_alloc_start;
168 static unsigned long __initdata prom_tce_alloc_end;
171 /* Platforms codes are now obsolete in the kernel. Now only used within this
172 * file and ultimately gone too. Feel free to change them if you need, they
173 * are not shared with anything outside of this file anymore
175 #define PLATFORM_PSERIES 0x0100
176 #define PLATFORM_PSERIES_LPAR 0x0101
177 #define PLATFORM_LPAR 0x0001
178 #define PLATFORM_POWERMAC 0x0400
179 #define PLATFORM_GENERIC 0x0500
180 #define PLATFORM_OPAL 0x0600
182 static int __initdata of_platform;
184 static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
186 static unsigned long __initdata prom_memory_limit;
188 static unsigned long __initdata alloc_top;
189 static unsigned long __initdata alloc_top_high;
190 static unsigned long __initdata alloc_bottom;
191 static unsigned long __initdata rmo_top;
192 static unsigned long __initdata ram_top;
194 static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE];
195 static int __initdata mem_reserve_cnt;
197 static cell_t __initdata regbuf[1024];
199 static bool rtas_has_query_cpu_stopped;
203 * Error results ... some OF calls will return "-1" on error, some
204 * will return 0, some will return either. To simplify, here are
205 * macros to use with any ihandle or phandle return value to check if
209 #define PROM_ERROR (-1u)
210 #define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
211 #define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
214 /* This is the one and *ONLY* place where we actually call open
218 static int __init call_prom(const char *service, int nargs, int nret, ...)
221 struct prom_args args;
224 args.service = cpu_to_be32(ADDR(service));
225 args.nargs = cpu_to_be32(nargs);
226 args.nret = cpu_to_be32(nret);
228 va_start(list, nret);
229 for (i = 0; i < nargs; i++)
230 args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
233 for (i = 0; i < nret; i++)
234 args.args[nargs+i] = 0;
236 if (enter_prom(&args, prom_entry) < 0)
239 return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
242 static int __init call_prom_ret(const char *service, int nargs, int nret,
243 prom_arg_t *rets, ...)
246 struct prom_args args;
249 args.service = cpu_to_be32(ADDR(service));
250 args.nargs = cpu_to_be32(nargs);
251 args.nret = cpu_to_be32(nret);
253 va_start(list, rets);
254 for (i = 0; i < nargs; i++)
255 args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
258 for (i = 0; i < nret; i++)
259 args.args[nargs+i] = 0;
261 if (enter_prom(&args, prom_entry) < 0)
265 for (i = 1; i < nret; ++i)
266 rets[i-1] = be32_to_cpu(args.args[nargs+i]);
268 return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
272 static void __init prom_print(const char *msg)
276 if (prom.stdout == 0)
279 for (p = msg; *p != 0; p = q) {
280 for (q = p; *q != 0 && *q != '\n'; ++q)
283 call_prom("write", 3, 1, prom.stdout, p, q - p);
287 call_prom("write", 3, 1, prom.stdout, ADDR("\r\n"), 2);
292 static void __init prom_print_hex(unsigned long val)
294 int i, nibbles = sizeof(val)*2;
295 char buf[sizeof(val)*2+1];
297 for (i = nibbles-1; i >= 0; i--) {
298 buf[i] = (val & 0xf) + '0';
300 buf[i] += ('a'-'0'-10);
304 call_prom("write", 3, 1, prom.stdout, buf, nibbles);
307 /* max number of decimal digits in an unsigned long */
309 static void __init prom_print_dec(unsigned long val)
312 char buf[UL_DIGITS+1];
314 for (i = UL_DIGITS-1; i >= 0; i--) {
315 buf[i] = (val % 10) + '0';
320 /* shift stuff down */
321 size = UL_DIGITS - i;
322 call_prom("write", 3, 1, prom.stdout, buf+i, size);
325 static void __init prom_printf(const char *format, ...)
327 const char *p, *q, *s;
332 va_start(args, format);
333 for (p = format; *p != 0; p = q) {
334 for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q)
337 call_prom("write", 3, 1, prom.stdout, p, q - p);
342 call_prom("write", 3, 1, prom.stdout,
352 s = va_arg(args, const char *);
357 v = va_arg(args, unsigned long);
362 vs = va_arg(args, int);
373 else if (*q == 'x') {
375 v = va_arg(args, unsigned long);
377 } else if (*q == 'u') { /* '%lu' */
379 v = va_arg(args, unsigned long);
381 } else if (*q == 'd') { /* %ld */
383 vs = va_arg(args, long);
397 static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
401 if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) {
403 * Old OF requires we claim physical and virtual separately
404 * and then map explicitly (assuming virtual mode)
409 ret = call_prom_ret("call-method", 5, 2, &result,
410 ADDR("claim"), prom.memory,
412 if (ret != 0 || result == -1)
414 ret = call_prom_ret("call-method", 5, 2, &result,
415 ADDR("claim"), prom.mmumap,
418 call_prom("call-method", 4, 1, ADDR("release"),
419 prom.memory, size, virt);
422 /* the 0x12 is M (coherence) + PP == read/write */
423 call_prom("call-method", 6, 1,
424 ADDR("map"), prom.mmumap, 0x12, size, virt, virt);
427 return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size,
431 static void __init __attribute__((noreturn)) prom_panic(const char *reason)
434 /* Do not call exit because it clears the screen on pmac
435 * it also causes some sort of double-fault on early pmacs */
436 if (of_platform == PLATFORM_POWERMAC)
439 /* ToDo: should put up an SRC here on pSeries */
440 call_prom("exit", 0, 0);
442 for (;;) /* should never get here */
447 static int __init prom_next_node(phandle *nodep)
451 if ((node = *nodep) != 0
452 && (*nodep = call_prom("child", 1, 1, node)) != 0)
454 if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
457 if ((node = call_prom("parent", 1, 1, node)) == 0)
459 if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
464 static inline int prom_getprop(phandle node, const char *pname,
465 void *value, size_t valuelen)
467 return call_prom("getprop", 4, 1, node, ADDR(pname),
468 (u32)(unsigned long) value, (u32) valuelen);
471 static inline int prom_getproplen(phandle node, const char *pname)
473 return call_prom("getproplen", 2, 1, node, ADDR(pname));
476 static void add_string(char **str, const char *q)
486 static char *tohex(unsigned int x)
488 static char digits[] = "0123456789abcdef";
489 static char result[9];
496 result[i] = digits[x & 0xf];
498 } while (x != 0 && i > 0);
502 static int __init prom_setprop(phandle node, const char *nodename,
503 const char *pname, void *value, size_t valuelen)
507 if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL))
508 return call_prom("setprop", 4, 1, node, ADDR(pname),
509 (u32)(unsigned long) value, (u32) valuelen);
511 /* gah... setprop doesn't work on longtrail, have to use interpret */
513 add_string(&p, "dev");
514 add_string(&p, nodename);
515 add_string(&p, tohex((u32)(unsigned long) value));
516 add_string(&p, tohex(valuelen));
517 add_string(&p, tohex(ADDR(pname)));
518 add_string(&p, tohex(strlen(pname)));
519 add_string(&p, "property");
521 return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
524 /* We can't use the standard versions because of relocation headaches. */
525 #define isxdigit(c) (('0' <= (c) && (c) <= '9') \
526 || ('a' <= (c) && (c) <= 'f') \
527 || ('A' <= (c) && (c) <= 'F'))
529 #define isdigit(c) ('0' <= (c) && (c) <= '9')
530 #define islower(c) ('a' <= (c) && (c) <= 'z')
531 #define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
533 static unsigned long prom_strtoul(const char *cp, const char **endp)
535 unsigned long result = 0, base = 10, value;
540 if (toupper(*cp) == 'X') {
546 while (isxdigit(*cp) &&
547 (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
548 result = result * base + value;
558 static unsigned long prom_memparse(const char *ptr, const char **retptr)
560 unsigned long ret = prom_strtoul(ptr, retptr);
564 * We can't use a switch here because GCC *may* generate a
565 * jump table which won't work, because we're not running at
566 * the address we're linked at.
568 if ('G' == **retptr || 'g' == **retptr)
571 if ('M' == **retptr || 'm' == **retptr)
574 if ('K' == **retptr || 'k' == **retptr)
586 * Early parsing of the command line passed to the kernel, used for
587 * "mem=x" and the options that affect the iommu
589 static void __init early_cmdline_parse(void)
596 prom_cmd_line[0] = 0;
598 if ((long)prom.chosen > 0)
599 l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
600 #ifdef CONFIG_CMDLINE
601 if (l <= 0 || p[0] == '\0') /* dbl check */
602 strlcpy(prom_cmd_line,
603 CONFIG_CMDLINE, sizeof(prom_cmd_line));
604 #endif /* CONFIG_CMDLINE */
605 prom_printf("command line: %s\n", prom_cmd_line);
608 opt = strstr(prom_cmd_line, "iommu=");
610 prom_printf("iommu opt is: %s\n", opt);
612 while (*opt && *opt == ' ')
614 if (!strncmp(opt, "off", 3))
616 else if (!strncmp(opt, "force", 5))
617 prom_iommu_force_on = 1;
620 opt = strstr(prom_cmd_line, "mem=");
623 prom_memory_limit = prom_memparse(opt, (const char **)&opt);
625 /* Align to 16 MB == size of ppc64 large page */
626 prom_memory_limit = ALIGN(prom_memory_limit, 0x1000000);
631 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
633 * The architecture vector has an array of PVR mask/value pairs,
634 * followed by # option vectors - 1, followed by the option vectors.
636 * See prom.h for the definition of the bits specified in the
637 * architecture vector.
640 /* Firmware expects the value to be n - 1, where n is the # of vectors */
641 #define NUM_VECTORS(n) ((n) - 1)
644 * Firmware expects 1 + n - 2, where n is the length of the option vector in
645 * bytes. The 1 accounts for the length byte itself, the - 2 .. ?
647 #define VECTOR_LENGTH(n) (1 + (n) - 2)
649 struct option_vector1 {
655 struct option_vector2 {
669 struct option_vector3 {
674 struct option_vector4 {
679 struct option_vector5 {
691 u8 platform_facilities;
700 struct option_vector6 {
706 struct ibm_arch_vec {
707 struct { u32 mask, val; } pvrs[12];
712 struct option_vector1 vec1;
715 struct option_vector2 vec2;
718 struct option_vector3 vec3;
721 struct option_vector4 vec4;
724 struct option_vector5 vec5;
727 struct option_vector6 vec6;
730 struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = {
733 .mask = cpu_to_be32(0xfffe0000), /* POWER5/POWER5+ */
734 .val = cpu_to_be32(0x003a0000),
737 .mask = cpu_to_be32(0xffff0000), /* POWER6 */
738 .val = cpu_to_be32(0x003e0000),
741 .mask = cpu_to_be32(0xffff0000), /* POWER7 */
742 .val = cpu_to_be32(0x003f0000),
745 .mask = cpu_to_be32(0xffff0000), /* POWER8E */
746 .val = cpu_to_be32(0x004b0000),
749 .mask = cpu_to_be32(0xffff0000), /* POWER8NVL */
750 .val = cpu_to_be32(0x004c0000),
753 .mask = cpu_to_be32(0xffff0000), /* POWER8 */
754 .val = cpu_to_be32(0x004d0000),
757 .mask = cpu_to_be32(0xffff0000), /* POWER9 */
758 .val = cpu_to_be32(0x004e0000),
761 .mask = cpu_to_be32(0xffffffff), /* all 3.00-compliant */
762 .val = cpu_to_be32(0x0f000005),
765 .mask = cpu_to_be32(0xffffffff), /* all 2.07-compliant */
766 .val = cpu_to_be32(0x0f000004),
769 .mask = cpu_to_be32(0xffffffff), /* all 2.06-compliant */
770 .val = cpu_to_be32(0x0f000003),
773 .mask = cpu_to_be32(0xffffffff), /* all 2.05-compliant */
774 .val = cpu_to_be32(0x0f000002),
777 .mask = cpu_to_be32(0xfffffffe), /* all 2.04-compliant and earlier */
778 .val = cpu_to_be32(0x0f000001),
782 .num_vectors = NUM_VECTORS(6),
784 .vec1_len = VECTOR_LENGTH(sizeof(struct option_vector1)),
787 .arch_versions = OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
788 OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
789 .arch_versions3 = OV1_PPC_3_00,
792 .vec2_len = VECTOR_LENGTH(sizeof(struct option_vector2)),
793 /* option vector 2: Open Firmware options supported */
795 .byte1 = OV2_REAL_MODE,
797 .real_base = cpu_to_be32(0xffffffff),
798 .real_size = cpu_to_be32(0xffffffff),
799 .virt_base = cpu_to_be32(0xffffffff),
800 .virt_size = cpu_to_be32(0xffffffff),
801 .load_base = cpu_to_be32(0xffffffff),
802 .min_rma = cpu_to_be32(256), /* 256MB min RMA */
803 .min_load = cpu_to_be32(0xffffffff), /* full client load */
804 .min_rma_percent = 0, /* min RMA percentage of total RAM */
805 .max_pft_size = 48, /* max log_2(hash table size) */
808 .vec3_len = VECTOR_LENGTH(sizeof(struct option_vector3)),
809 /* option vector 3: processor options supported */
811 .byte1 = 0, /* don't ignore, don't halt */
812 .byte2 = OV3_FP | OV3_VMX | OV3_DFP,
815 .vec4_len = VECTOR_LENGTH(sizeof(struct option_vector4)),
816 /* option vector 4: IBM PAPR implementation */
818 .byte1 = 0, /* don't halt */
819 .min_vp_cap = OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */
822 .vec5_len = VECTOR_LENGTH(sizeof(struct option_vector5)),
823 /* option vector 5: PAPR/OF options */
825 .byte1 = 0, /* don't ignore, don't halt */
826 .byte2 = OV5_FEAT(OV5_LPAR) | OV5_FEAT(OV5_SPLPAR) | OV5_FEAT(OV5_LARGE_PAGES) |
827 OV5_FEAT(OV5_DRCONF_MEMORY) | OV5_FEAT(OV5_DONATE_DEDICATE_CPU) |
828 #ifdef CONFIG_PCI_MSI
829 /* PCIe/MSI support. Without MSI full PCIe is not supported */
836 #ifdef CONFIG_PPC_SMLPAR
837 OV5_FEAT(OV5_CMO) | OV5_FEAT(OV5_XCMO),
841 .associativity = OV5_FEAT(OV5_TYPE1_AFFINITY) | OV5_FEAT(OV5_PRRN),
842 .bin_opts = OV5_FEAT(OV5_RESIZE_HPT) | OV5_FEAT(OV5_HP_EVT),
843 .micro_checkpoint = 0,
845 .max_cpus = cpu_to_be32(NR_CPUS), /* number of cores supported */
848 .platform_facilities = OV5_FEAT(OV5_PFO_HW_RNG) | OV5_FEAT(OV5_PFO_HW_ENCR) | OV5_FEAT(OV5_PFO_HW_842),
853 .mmu = OV5_FEAT(OV5_MMU_RADIX_300) | OV5_FEAT(OV5_MMU_HASH_300) |
854 OV5_FEAT(OV5_MMU_PROC_TBL) | OV5_FEAT(OV5_MMU_GTSE),
857 /* option vector 6: IBM PAPR hints */
858 .vec6_len = VECTOR_LENGTH(sizeof(struct option_vector6)),
862 .os_name = OV6_LINUX,
866 /* Old method - ELF header with PT_NOTE sections only works on BE */
867 #ifdef __BIG_ENDIAN__
868 static struct fake_elf {
875 char name[8]; /* "PowerPC" */
889 char name[24]; /* "IBM,RPA-Client-Config" */
903 .e_ident = { 0x7f, 'E', 'L', 'F',
904 ELFCLASS32, ELFDATA2MSB, EV_CURRENT },
905 .e_type = ET_EXEC, /* yeah right */
907 .e_version = EV_CURRENT,
908 .e_phoff = offsetof(struct fake_elf, phdr),
909 .e_phentsize = sizeof(Elf32_Phdr),
915 .p_offset = offsetof(struct fake_elf, chrpnote),
916 .p_filesz = sizeof(struct chrpnote)
919 .p_offset = offsetof(struct fake_elf, rpanote),
920 .p_filesz = sizeof(struct rpanote)
924 .namesz = sizeof("PowerPC"),
925 .descsz = sizeof(struct chrpdesc),
929 .real_mode = ~0U, /* ~0 means "don't care" */
938 .namesz = sizeof("IBM,RPA-Client-Config"),
939 .descsz = sizeof(struct rpadesc),
941 .name = "IBM,RPA-Client-Config",
944 .min_rmo_size = 64, /* in megabytes */
945 .min_rmo_percent = 0,
946 .max_pft_size = 48, /* 2^48 bytes max PFT size */
953 #endif /* __BIG_ENDIAN__ */
955 static int __init prom_count_smt_threads(void)
961 /* Pick up th first CPU node we can find */
962 for (node = 0; prom_next_node(&node); ) {
964 prom_getprop(node, "device_type", type, sizeof(type));
966 if (strcmp(type, "cpu"))
969 * There is an entry for each smt thread, each entry being
970 * 4 bytes long. All cpus should have the same number of
971 * smt threads, so return after finding the first.
973 plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s");
974 if (plen == PROM_ERROR)
977 prom_debug("Found %lu smt threads per core\n", (unsigned long)plen);
980 if (plen < 1 || plen > 64) {
981 prom_printf("Threads per core %lu out of bounds, assuming 1\n",
982 (unsigned long)plen);
987 prom_debug("No threads found, assuming 1 per core\n");
994 static void __init prom_send_capabilities(void)
1000 root = call_prom("open", 1, 1, ADDR("/"));
1002 /* We need to tell the FW about the number of cores we support.
1004 * To do that, we count the number of threads on the first core
1005 * (we assume this is the same for all cores) and use it to
1009 cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
1010 prom_printf("Max number of cores passed to firmware: %lu (NR_CPUS = %lu)\n",
1013 ibm_architecture_vec.vec5.max_cpus = cpu_to_be32(cores);
1015 /* try calling the ibm,client-architecture-support method */
1016 prom_printf("Calling ibm,client-architecture-support...");
1017 if (call_prom_ret("call-method", 3, 2, &ret,
1018 ADDR("ibm,client-architecture-support"),
1020 ADDR(&ibm_architecture_vec)) == 0) {
1021 /* the call exists... */
1023 prom_printf("\nWARNING: ibm,client-architecture"
1024 "-support call FAILED!\n");
1025 call_prom("close", 1, 0, root);
1026 prom_printf(" done\n");
1029 call_prom("close", 1, 0, root);
1030 prom_printf(" not implemented\n");
1033 #ifdef __BIG_ENDIAN__
1037 /* no ibm,client-architecture-support call, try the old way */
1038 elfloader = call_prom("open", 1, 1,
1039 ADDR("/packages/elf-loader"));
1040 if (elfloader == 0) {
1041 prom_printf("couldn't open /packages/elf-loader\n");
1044 call_prom("call-method", 3, 1, ADDR("process-elf-header"),
1045 elfloader, ADDR(&fake_elf));
1046 call_prom("close", 1, 0, elfloader);
1048 #endif /* __BIG_ENDIAN__ */
1050 #endif /* #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
1053 * Memory allocation strategy... our layout is normally:
1055 * at 14Mb or more we have vmlinux, then a gap and initrd. In some
1056 * rare cases, initrd might end up being before the kernel though.
1057 * We assume this won't override the final kernel at 0, we have no
1058 * provision to handle that in this version, but it should hopefully
1061 * alloc_top is set to the top of RMO, eventually shrink down if the
1064 * alloc_bottom is set to the top of kernel/initrd
1066 * from there, allocations are done this way : rtas is allocated
1067 * topmost, and the device-tree is allocated from the bottom. We try
1068 * to grow the device-tree allocation as we progress. If we can't,
1069 * then we fail, we don't currently have a facility to restart
1070 * elsewhere, but that shouldn't be necessary.
1072 * Note that calls to reserve_mem have to be done explicitly, memory
1073 * allocated with either alloc_up or alloc_down isn't automatically
1079 * Allocates memory in the RMO upward from the kernel/initrd
1081 * When align is 0, this is a special case, it means to allocate in place
1082 * at the current location of alloc_bottom or fail (that is basically
1083 * extending the previous allocation). Used for the device-tree flattening
1085 static unsigned long __init alloc_up(unsigned long size, unsigned long align)
1087 unsigned long base = alloc_bottom;
1088 unsigned long addr = 0;
1091 base = _ALIGN_UP(base, align);
1092 prom_debug("alloc_up(%x, %x)\n", size, align);
1094 prom_panic("alloc_up() called with mem not initialized\n");
1097 base = _ALIGN_UP(alloc_bottom, align);
1099 base = alloc_bottom;
1101 for(; (base + size) <= alloc_top;
1102 base = _ALIGN_UP(base + 0x100000, align)) {
1103 prom_debug(" trying: 0x%x\n\r", base);
1104 addr = (unsigned long)prom_claim(base, size, 0);
1105 if (addr != PROM_ERROR && addr != 0)
1113 alloc_bottom = addr + size;
1115 prom_debug(" -> %x\n", addr);
1116 prom_debug(" alloc_bottom : %x\n", alloc_bottom);
1117 prom_debug(" alloc_top : %x\n", alloc_top);
1118 prom_debug(" alloc_top_hi : %x\n", alloc_top_high);
1119 prom_debug(" rmo_top : %x\n", rmo_top);
1120 prom_debug(" ram_top : %x\n", ram_top);
1126 * Allocates memory downward, either from top of RMO, or if highmem
1127 * is set, from the top of RAM. Note that this one doesn't handle
1128 * failures. It does claim memory if highmem is not set.
1130 static unsigned long __init alloc_down(unsigned long size, unsigned long align,
1133 unsigned long base, addr = 0;
1135 prom_debug("alloc_down(%x, %x, %s)\n", size, align,
1136 highmem ? "(high)" : "(low)");
1138 prom_panic("alloc_down() called with mem not initialized\n");
1141 /* Carve out storage for the TCE table. */
1142 addr = _ALIGN_DOWN(alloc_top_high - size, align);
1143 if (addr <= alloc_bottom)
1145 /* Will we bump into the RMO ? If yes, check out that we
1146 * didn't overlap existing allocations there, if we did,
1147 * we are dead, we must be the first in town !
1149 if (addr < rmo_top) {
1150 /* Good, we are first */
1151 if (alloc_top == rmo_top)
1152 alloc_top = rmo_top = addr;
1156 alloc_top_high = addr;
1160 base = _ALIGN_DOWN(alloc_top - size, align);
1161 for (; base > alloc_bottom;
1162 base = _ALIGN_DOWN(base - 0x100000, align)) {
1163 prom_debug(" trying: 0x%x\n\r", base);
1164 addr = (unsigned long)prom_claim(base, size, 0);
1165 if (addr != PROM_ERROR && addr != 0)
1174 prom_debug(" -> %x\n", addr);
1175 prom_debug(" alloc_bottom : %x\n", alloc_bottom);
1176 prom_debug(" alloc_top : %x\n", alloc_top);
1177 prom_debug(" alloc_top_hi : %x\n", alloc_top_high);
1178 prom_debug(" rmo_top : %x\n", rmo_top);
1179 prom_debug(" ram_top : %x\n", ram_top);
1185 * Parse a "reg" cell
1187 static unsigned long __init prom_next_cell(int s, cell_t **cellp)
1190 unsigned long r = 0;
1192 /* Ignore more than 2 cells */
1193 while (s > sizeof(unsigned long) / 4) {
1197 r = be32_to_cpu(*p++);
1201 r |= be32_to_cpu(*(p++));
1209 * Very dumb function for adding to the memory reserve list, but
1210 * we don't need anything smarter at this point
1212 * XXX Eventually check for collisions. They should NEVER happen.
1213 * If problems seem to show up, it would be a good start to track
1216 static void __init reserve_mem(u64 base, u64 size)
1218 u64 top = base + size;
1219 unsigned long cnt = mem_reserve_cnt;
1224 /* We need to always keep one empty entry so that we
1225 * have our terminator with "size" set to 0 since we are
1226 * dumb and just copy this entire array to the boot params
1228 base = _ALIGN_DOWN(base, PAGE_SIZE);
1229 top = _ALIGN_UP(top, PAGE_SIZE);
1232 if (cnt >= (MEM_RESERVE_MAP_SIZE - 1))
1233 prom_panic("Memory reserve map exhausted !\n");
1234 mem_reserve_map[cnt].base = cpu_to_be64(base);
1235 mem_reserve_map[cnt].size = cpu_to_be64(size);
1236 mem_reserve_cnt = cnt + 1;
1240 * Initialize memory allocation mechanism, parse "memory" nodes and
1241 * obtain that way the top of memory and RMO to setup out local allocator
1243 static void __init prom_init_mem(void)
1246 char *path, type[64];
1253 * We iterate the memory nodes to find
1254 * 1) top of RMO (first node)
1257 val = cpu_to_be32(2);
1258 prom_getprop(prom.root, "#address-cells", &val, sizeof(val));
1259 rac = be32_to_cpu(val);
1260 val = cpu_to_be32(1);
1261 prom_getprop(prom.root, "#size-cells", &val, sizeof(rsc));
1262 rsc = be32_to_cpu(val);
1263 prom_debug("root_addr_cells: %x\n", rac);
1264 prom_debug("root_size_cells: %x\n", rsc);
1266 prom_debug("scanning memory:\n");
1267 path = prom_scratch;
1269 for (node = 0; prom_next_node(&node); ) {
1271 prom_getprop(node, "device_type", type, sizeof(type));
1275 * CHRP Longtrail machines have no device_type
1276 * on the memory node, so check the name instead...
1278 prom_getprop(node, "name", type, sizeof(type));
1280 if (strcmp(type, "memory"))
1283 plen = prom_getprop(node, "reg", regbuf, sizeof(regbuf));
1284 if (plen > sizeof(regbuf)) {
1285 prom_printf("memory node too large for buffer !\n");
1286 plen = sizeof(regbuf);
1289 endp = p + (plen / sizeof(cell_t));
1292 memset(path, 0, PROM_SCRATCH_SIZE);
1293 call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1);
1294 prom_debug(" node %s :\n", path);
1295 #endif /* DEBUG_PROM */
1297 while ((endp - p) >= (rac + rsc)) {
1298 unsigned long base, size;
1300 base = prom_next_cell(rac, &p);
1301 size = prom_next_cell(rsc, &p);
1305 prom_debug(" %x %x\n", base, size);
1306 if (base == 0 && (of_platform & PLATFORM_LPAR))
1308 if ((base + size) > ram_top)
1309 ram_top = base + size;
1313 alloc_bottom = PAGE_ALIGN((unsigned long)&_end + 0x4000);
1316 * If prom_memory_limit is set we reduce the upper limits *except* for
1317 * alloc_top_high. This must be the real top of RAM so we can put
1321 alloc_top_high = ram_top;
1323 if (prom_memory_limit) {
1324 if (prom_memory_limit <= alloc_bottom) {
1325 prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
1327 prom_memory_limit = 0;
1328 } else if (prom_memory_limit >= ram_top) {
1329 prom_printf("Ignoring mem=%x >= ram_top.\n",
1331 prom_memory_limit = 0;
1333 ram_top = prom_memory_limit;
1334 rmo_top = min(rmo_top, prom_memory_limit);
1339 * Setup our top alloc point, that is top of RMO or top of
1340 * segment 0 when running non-LPAR.
1341 * Some RS64 machines have buggy firmware where claims up at
1342 * 1GB fail. Cap at 768MB as a workaround.
1343 * Since 768MB is plenty of room, and we need to cap to something
1344 * reasonable on 32-bit, cap at 768MB on all machines.
1348 rmo_top = min(0x30000000ul, rmo_top);
1349 alloc_top = rmo_top;
1350 alloc_top_high = ram_top;
1353 * Check if we have an initrd after the kernel but still inside
1354 * the RMO. If we do move our bottom point to after it.
1356 if (prom_initrd_start &&
1357 prom_initrd_start < rmo_top &&
1358 prom_initrd_end > alloc_bottom)
1359 alloc_bottom = PAGE_ALIGN(prom_initrd_end);
1361 prom_printf("memory layout at init:\n");
1362 prom_printf(" memory_limit : %x (16 MB aligned)\n", prom_memory_limit);
1363 prom_printf(" alloc_bottom : %x\n", alloc_bottom);
1364 prom_printf(" alloc_top : %x\n", alloc_top);
1365 prom_printf(" alloc_top_hi : %x\n", alloc_top_high);
1366 prom_printf(" rmo_top : %x\n", rmo_top);
1367 prom_printf(" ram_top : %x\n", ram_top);
1370 static void __init prom_close_stdin(void)
1375 if (prom_getprop(prom.chosen, "stdin", &val, sizeof(val)) > 0) {
1376 stdin = be32_to_cpu(val);
1377 call_prom("close", 1, 0, stdin);
1381 #ifdef CONFIG_PPC_POWERNV
1383 #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
1384 static u64 __initdata prom_opal_base;
1385 static u64 __initdata prom_opal_entry;
1389 * Allocate room for and instantiate OPAL
1391 static void __init prom_instantiate_opal(void)
1396 u64 size = 0, align = 0x10000;
1400 prom_debug("prom_instantiate_opal: start...\n");
1402 opal_node = call_prom("finddevice", 1, 1, ADDR("/ibm,opal"));
1403 prom_debug("opal_node: %x\n", opal_node);
1404 if (!PHANDLE_VALID(opal_node))
1408 prom_getprop(opal_node, "opal-runtime-size", &val64, sizeof(val64));
1409 size = be64_to_cpu(val64);
1413 prom_getprop(opal_node, "opal-runtime-alignment", &val64,sizeof(val64));
1414 align = be64_to_cpu(val64);
1416 base = alloc_down(size, align, 0);
1418 prom_printf("OPAL allocation failed !\n");
1422 opal_inst = call_prom("open", 1, 1, ADDR("/ibm,opal"));
1423 if (!IHANDLE_VALID(opal_inst)) {
1424 prom_printf("opening opal package failed (%x)\n", opal_inst);
1428 prom_printf("instantiating opal at 0x%x...", base);
1430 if (call_prom_ret("call-method", 4, 3, rets,
1431 ADDR("load-opal-runtime"),
1433 base >> 32, base & 0xffffffff) != 0
1434 || (rets[0] == 0 && rets[1] == 0)) {
1435 prom_printf(" failed\n");
1438 entry = (((u64)rets[0]) << 32) | rets[1];
1440 prom_printf(" done\n");
1442 reserve_mem(base, size);
1444 prom_debug("opal base = 0x%x\n", base);
1445 prom_debug("opal align = 0x%x\n", align);
1446 prom_debug("opal entry = 0x%x\n", entry);
1447 prom_debug("opal size = 0x%x\n", (long)size);
1449 prom_setprop(opal_node, "/ibm,opal", "opal-base-address",
1450 &base, sizeof(base));
1451 prom_setprop(opal_node, "/ibm,opal", "opal-entry-address",
1452 &entry, sizeof(entry));
1454 #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
1455 prom_opal_base = base;
1456 prom_opal_entry = entry;
1458 prom_debug("prom_instantiate_opal: end...\n");
1461 #endif /* CONFIG_PPC_POWERNV */
1464 * Allocate room for and instantiate RTAS
1466 static void __init prom_instantiate_rtas(void)
1470 u32 base, entry = 0;
1474 prom_debug("prom_instantiate_rtas: start...\n");
1476 rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
1477 prom_debug("rtas_node: %x\n", rtas_node);
1478 if (!PHANDLE_VALID(rtas_node))
1482 prom_getprop(rtas_node, "rtas-size", &val, sizeof(size));
1483 size = be32_to_cpu(val);
1487 base = alloc_down(size, PAGE_SIZE, 0);
1489 prom_panic("Could not allocate memory for RTAS\n");
1491 rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
1492 if (!IHANDLE_VALID(rtas_inst)) {
1493 prom_printf("opening rtas package failed (%x)\n", rtas_inst);
1497 prom_printf("instantiating rtas at 0x%x...", base);
1499 if (call_prom_ret("call-method", 3, 2, &entry,
1500 ADDR("instantiate-rtas"),
1501 rtas_inst, base) != 0
1503 prom_printf(" failed\n");
1506 prom_printf(" done\n");
1508 reserve_mem(base, size);
1510 val = cpu_to_be32(base);
1511 prom_setprop(rtas_node, "/rtas", "linux,rtas-base",
1513 val = cpu_to_be32(entry);
1514 prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
1517 /* Check if it supports "query-cpu-stopped-state" */
1518 if (prom_getprop(rtas_node, "query-cpu-stopped-state",
1519 &val, sizeof(val)) != PROM_ERROR)
1520 rtas_has_query_cpu_stopped = true;
1522 prom_debug("rtas base = 0x%x\n", base);
1523 prom_debug("rtas entry = 0x%x\n", entry);
1524 prom_debug("rtas size = 0x%x\n", (long)size);
1526 prom_debug("prom_instantiate_rtas: end...\n");
1531 * Allocate room for and instantiate Stored Measurement Log (SML)
1533 static void __init prom_instantiate_sml(void)
1535 phandle ibmvtpm_node;
1536 ihandle ibmvtpm_inst;
1537 u32 entry = 0, size = 0, succ = 0;
1541 prom_debug("prom_instantiate_sml: start...\n");
1543 ibmvtpm_node = call_prom("finddevice", 1, 1, ADDR("/vdevice/vtpm"));
1544 prom_debug("ibmvtpm_node: %x\n", ibmvtpm_node);
1545 if (!PHANDLE_VALID(ibmvtpm_node))
1548 ibmvtpm_inst = call_prom("open", 1, 1, ADDR("/vdevice/vtpm"));
1549 if (!IHANDLE_VALID(ibmvtpm_inst)) {
1550 prom_printf("opening vtpm package failed (%x)\n", ibmvtpm_inst);
1554 if (prom_getprop(ibmvtpm_node, "ibm,sml-efi-reformat-supported",
1555 &val, sizeof(val)) != PROM_ERROR) {
1556 if (call_prom_ret("call-method", 2, 2, &succ,
1557 ADDR("reformat-sml-to-efi-alignment"),
1558 ibmvtpm_inst) != 0 || succ == 0) {
1559 prom_printf("Reformat SML to EFI alignment failed\n");
1563 if (call_prom_ret("call-method", 2, 2, &size,
1564 ADDR("sml-get-allocated-size"),
1565 ibmvtpm_inst) != 0 || size == 0) {
1566 prom_printf("SML get allocated size failed\n");
1570 if (call_prom_ret("call-method", 2, 2, &size,
1571 ADDR("sml-get-handover-size"),
1572 ibmvtpm_inst) != 0 || size == 0) {
1573 prom_printf("SML get handover size failed\n");
1578 base = alloc_down(size, PAGE_SIZE, 0);
1580 prom_panic("Could not allocate memory for sml\n");
1582 prom_printf("instantiating sml at 0x%x...", base);
1584 memset((void *)base, 0, size);
1586 if (call_prom_ret("call-method", 4, 2, &entry,
1587 ADDR("sml-handover"),
1588 ibmvtpm_inst, size, base) != 0 || entry == 0) {
1589 prom_printf("SML handover failed\n");
1592 prom_printf(" done\n");
1594 reserve_mem(base, size);
1596 prom_setprop(ibmvtpm_node, "/vdevice/vtpm", "linux,sml-base",
1597 &base, sizeof(base));
1598 prom_setprop(ibmvtpm_node, "/vdevice/vtpm", "linux,sml-size",
1599 &size, sizeof(size));
1601 prom_debug("sml base = 0x%x\n", base);
1602 prom_debug("sml size = 0x%x\n", (long)size);
1604 prom_debug("prom_instantiate_sml: end...\n");
1608 * Allocate room for and initialize TCE tables
1610 #ifdef __BIG_ENDIAN__
1611 static void __init prom_initialize_tce_table(void)
1615 char compatible[64], type[64], model[64];
1616 char *path = prom_scratch;
1618 u32 minalign, minsize;
1619 u64 tce_entry, *tce_entryp;
1620 u64 local_alloc_top, local_alloc_bottom;
1626 prom_debug("starting prom_initialize_tce_table\n");
1628 /* Cache current top of allocs so we reserve a single block */
1629 local_alloc_top = alloc_top_high;
1630 local_alloc_bottom = local_alloc_top;
1632 /* Search all nodes looking for PHBs. */
1633 for (node = 0; prom_next_node(&node); ) {
1637 prom_getprop(node, "compatible",
1638 compatible, sizeof(compatible));
1639 prom_getprop(node, "device_type", type, sizeof(type));
1640 prom_getprop(node, "model", model, sizeof(model));
1642 if ((type[0] == 0) || (strstr(type, "pci") == NULL))
1645 /* Keep the old logic intact to avoid regression. */
1646 if (compatible[0] != 0) {
1647 if ((strstr(compatible, "python") == NULL) &&
1648 (strstr(compatible, "Speedwagon") == NULL) &&
1649 (strstr(compatible, "Winnipeg") == NULL))
1651 } else if (model[0] != 0) {
1652 if ((strstr(model, "ython") == NULL) &&
1653 (strstr(model, "peedwagon") == NULL) &&
1654 (strstr(model, "innipeg") == NULL))
1658 if (prom_getprop(node, "tce-table-minalign", &minalign,
1659 sizeof(minalign)) == PROM_ERROR)
1661 if (prom_getprop(node, "tce-table-minsize", &minsize,
1662 sizeof(minsize)) == PROM_ERROR)
1663 minsize = 4UL << 20;
1666 * Even though we read what OF wants, we just set the table
1667 * size to 4 MB. This is enough to map 2GB of PCI DMA space.
1668 * By doing this, we avoid the pitfalls of trying to DMA to
1669 * MMIO space and the DMA alias hole.
1671 * On POWER4, firmware sets the TCE region by assuming
1672 * each TCE table is 8MB. Using this memory for anything
1673 * else will impact performance, so we always allocate 8MB.
1676 if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p))
1677 minsize = 8UL << 20;
1679 minsize = 4UL << 20;
1681 /* Align to the greater of the align or size */
1682 align = max(minalign, minsize);
1683 base = alloc_down(minsize, align, 1);
1685 prom_panic("ERROR, cannot find space for TCE table.\n");
1686 if (base < local_alloc_bottom)
1687 local_alloc_bottom = base;
1689 /* It seems OF doesn't null-terminate the path :-( */
1690 memset(path, 0, PROM_SCRATCH_SIZE);
1691 /* Call OF to setup the TCE hardware */
1692 if (call_prom("package-to-path", 3, 1, node,
1693 path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) {
1694 prom_printf("package-to-path failed\n");
1697 /* Save away the TCE table attributes for later use. */
1698 prom_setprop(node, path, "linux,tce-base", &base, sizeof(base));
1699 prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize));
1701 prom_debug("TCE table: %s\n", path);
1702 prom_debug("\tnode = 0x%x\n", node);
1703 prom_debug("\tbase = 0x%x\n", base);
1704 prom_debug("\tsize = 0x%x\n", minsize);
1706 /* Initialize the table to have a one-to-one mapping
1707 * over the allocated size.
1709 tce_entryp = (u64 *)base;
1710 for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) {
1711 tce_entry = (i << PAGE_SHIFT);
1713 *tce_entryp = tce_entry;
1716 prom_printf("opening PHB %s", path);
1717 phb_node = call_prom("open", 1, 1, path);
1719 prom_printf("... failed\n");
1721 prom_printf("... done\n");
1723 call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"),
1724 phb_node, -1, minsize,
1725 (u32) base, (u32) (base >> 32));
1726 call_prom("close", 1, 0, phb_node);
1729 reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
1731 /* These are only really needed if there is a memory limit in
1732 * effect, but we don't know so export them always. */
1733 prom_tce_alloc_start = local_alloc_bottom;
1734 prom_tce_alloc_end = local_alloc_top;
1736 /* Flag the first invalid entry */
1737 prom_debug("ending prom_initialize_tce_table\n");
1739 #endif /* __BIG_ENDIAN__ */
1740 #endif /* CONFIG_PPC64 */
1743 * With CHRP SMP we need to use the OF to start the other processors.
1744 * We can't wait until smp_boot_cpus (the OF is trashed by then)
1745 * so we have to put the processors into a holding pattern controlled
1746 * by the kernel (not OF) before we destroy the OF.
1748 * This uses a chunk of low memory, puts some holding pattern
1749 * code there and sends the other processors off to there until
1750 * smp_boot_cpus tells them to do something. The holding pattern
1751 * checks that address until its cpu # is there, when it is that
1752 * cpu jumps to __secondary_start(). smp_boot_cpus() takes care
1753 * of setting those values.
1755 * We also use physical address 0x4 here to tell when a cpu
1756 * is in its holding pattern code.
1761 * We want to reference the copy of __secondary_hold_* in the
1762 * 0 - 0x100 address range
1764 #define LOW_ADDR(x) (((unsigned long) &(x)) & 0xff)
1766 static void __init prom_hold_cpus(void)
1771 unsigned long *spinloop
1772 = (void *) LOW_ADDR(__secondary_hold_spinloop);
1773 unsigned long *acknowledge
1774 = (void *) LOW_ADDR(__secondary_hold_acknowledge);
1775 unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
1778 * On pseries, if RTAS supports "query-cpu-stopped-state",
1779 * we skip this stage, the CPUs will be started by the
1780 * kernel using RTAS.
1782 if ((of_platform == PLATFORM_PSERIES ||
1783 of_platform == PLATFORM_PSERIES_LPAR) &&
1784 rtas_has_query_cpu_stopped) {
1785 prom_printf("prom_hold_cpus: skipped\n");
1789 prom_debug("prom_hold_cpus: start...\n");
1790 prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop);
1791 prom_debug(" 1) *spinloop = 0x%x\n", *spinloop);
1792 prom_debug(" 1) acknowledge = 0x%x\n",
1793 (unsigned long)acknowledge);
1794 prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge);
1795 prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold);
1797 /* Set the common spinloop variable, so all of the secondary cpus
1798 * will block when they are awakened from their OF spinloop.
1799 * This must occur for both SMP and non SMP kernels, since OF will
1800 * be trashed when we move the kernel.
1805 for (node = 0; prom_next_node(&node); ) {
1806 unsigned int cpu_no;
1810 prom_getprop(node, "device_type", type, sizeof(type));
1811 if (strcmp(type, "cpu") != 0)
1814 /* Skip non-configured cpus. */
1815 if (prom_getprop(node, "status", type, sizeof(type)) > 0)
1816 if (strcmp(type, "okay") != 0)
1819 reg = cpu_to_be32(-1); /* make sparse happy */
1820 prom_getprop(node, "reg", ®, sizeof(reg));
1821 cpu_no = be32_to_cpu(reg);
1823 prom_debug("cpu hw idx = %lu\n", cpu_no);
1825 /* Init the acknowledge var which will be reset by
1826 * the secondary cpu when it awakens from its OF
1829 *acknowledge = (unsigned long)-1;
1831 if (cpu_no != prom.cpu) {
1832 /* Primary Thread of non-boot cpu or any thread */
1833 prom_printf("starting cpu hw idx %lu... ", cpu_no);
1834 call_prom("start-cpu", 3, 0, node,
1835 secondary_hold, cpu_no);
1837 for (i = 0; (i < 100000000) &&
1838 (*acknowledge == ((unsigned long)-1)); i++ )
1841 if (*acknowledge == cpu_no)
1842 prom_printf("done\n");
1844 prom_printf("failed: %x\n", *acknowledge);
1848 prom_printf("boot cpu hw idx %lu\n", cpu_no);
1849 #endif /* CONFIG_SMP */
1852 prom_debug("prom_hold_cpus: end...\n");
1856 static void __init prom_init_client_services(unsigned long pp)
1858 /* Get a handle to the prom entry point before anything else */
1861 /* get a handle for the stdout device */
1862 prom.chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
1863 if (!PHANDLE_VALID(prom.chosen))
1864 prom_panic("cannot find chosen"); /* msg won't be printed :( */
1866 /* get device tree root */
1867 prom.root = call_prom("finddevice", 1, 1, ADDR("/"));
1868 if (!PHANDLE_VALID(prom.root))
1869 prom_panic("cannot find device tree root"); /* msg won't be printed :( */
1876 * For really old powermacs, we need to map things we claim.
1877 * For that, we need the ihandle of the mmu.
1878 * Also, on the longtrail, we need to work around other bugs.
1880 static void __init prom_find_mmu(void)
1885 oprom = call_prom("finddevice", 1, 1, ADDR("/openprom"));
1886 if (!PHANDLE_VALID(oprom))
1888 if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0)
1890 version[sizeof(version) - 1] = 0;
1891 /* XXX might need to add other versions here */
1892 if (strcmp(version, "Open Firmware, 1.0.5") == 0)
1893 of_workarounds = OF_WA_CLAIM;
1894 else if (strncmp(version, "FirmWorks,3.", 12) == 0) {
1895 of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL;
1896 call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
1899 prom.memory = call_prom("open", 1, 1, ADDR("/memory"));
1900 prom_getprop(prom.chosen, "mmu", &prom.mmumap,
1901 sizeof(prom.mmumap));
1902 prom.mmumap = be32_to_cpu(prom.mmumap);
1903 if (!IHANDLE_VALID(prom.memory) || !IHANDLE_VALID(prom.mmumap))
1904 of_workarounds &= ~OF_WA_CLAIM; /* hmmm */
1907 #define prom_find_mmu()
1910 static void __init prom_init_stdout(void)
1912 char *path = of_stdout_device;
1914 phandle stdout_node;
1917 if (prom_getprop(prom.chosen, "stdout", &val, sizeof(val)) <= 0)
1918 prom_panic("cannot find stdout");
1920 prom.stdout = be32_to_cpu(val);
1922 /* Get the full OF pathname of the stdout device */
1923 memset(path, 0, 256);
1924 call_prom("instance-to-path", 3, 1, prom.stdout, path, 255);
1925 prom_printf("OF stdout device is: %s\n", of_stdout_device);
1926 prom_setprop(prom.chosen, "/chosen", "linux,stdout-path",
1927 path, strlen(path) + 1);
1929 /* instance-to-package fails on PA-Semi */
1930 stdout_node = call_prom("instance-to-package", 1, 1, prom.stdout);
1931 if (stdout_node != PROM_ERROR) {
1932 val = cpu_to_be32(stdout_node);
1933 prom_setprop(prom.chosen, "/chosen", "linux,stdout-package",
1936 /* If it's a display, note it */
1937 memset(type, 0, sizeof(type));
1938 prom_getprop(stdout_node, "device_type", type, sizeof(type));
1939 if (strcmp(type, "display") == 0)
1940 prom_setprop(stdout_node, path, "linux,boot-display", NULL, 0);
1944 static int __init prom_find_machine_type(void)
1953 /* Look for a PowerMac or a Cell */
1954 len = prom_getprop(prom.root, "compatible",
1955 compat, sizeof(compat)-1);
1959 char *p = &compat[i];
1963 if (strstr(p, "Power Macintosh") ||
1964 strstr(p, "MacRISC"))
1965 return PLATFORM_POWERMAC;
1967 /* We must make sure we don't detect the IBM Cell
1968 * blades as pSeries due to some firmware issues,
1971 if (strstr(p, "IBM,CBEA") ||
1972 strstr(p, "IBM,CPBW-1.0"))
1973 return PLATFORM_GENERIC;
1974 #endif /* CONFIG_PPC64 */
1979 /* Try to detect OPAL */
1980 if (PHANDLE_VALID(call_prom("finddevice", 1, 1, ADDR("/ibm,opal"))))
1981 return PLATFORM_OPAL;
1983 /* Try to figure out if it's an IBM pSeries or any other
1984 * PAPR compliant platform. We assume it is if :
1985 * - /device_type is "chrp" (please, do NOT use that for future
1989 len = prom_getprop(prom.root, "device_type",
1990 compat, sizeof(compat)-1);
1992 return PLATFORM_GENERIC;
1993 if (strcmp(compat, "chrp"))
1994 return PLATFORM_GENERIC;
1996 /* Default to pSeries. We need to know if we are running LPAR */
1997 rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
1998 if (!PHANDLE_VALID(rtas))
1999 return PLATFORM_GENERIC;
2000 x = prom_getproplen(rtas, "ibm,hypertas-functions");
2001 if (x != PROM_ERROR) {
2002 prom_debug("Hypertas detected, assuming LPAR !\n");
2003 return PLATFORM_PSERIES_LPAR;
2005 return PLATFORM_PSERIES;
2007 return PLATFORM_GENERIC;
2011 static int __init prom_set_color(ihandle ih, int i, int r, int g, int b)
2013 return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r);
2017 * If we have a display that we don't know how to drive,
2018 * we will want to try to execute OF's open method for it
2019 * later. However, OF will probably fall over if we do that
2020 * we've taken over the MMU.
2021 * So we check whether we will need to open the display,
2022 * and if so, open it now.
2024 static void __init prom_check_displays(void)
2026 char type[16], *path;
2031 static unsigned char default_colors[] = {
2049 const unsigned char *clut;
2051 prom_debug("Looking for displays\n");
2052 for (node = 0; prom_next_node(&node); ) {
2053 memset(type, 0, sizeof(type));
2054 prom_getprop(node, "device_type", type, sizeof(type));
2055 if (strcmp(type, "display") != 0)
2058 /* It seems OF doesn't null-terminate the path :-( */
2059 path = prom_scratch;
2060 memset(path, 0, PROM_SCRATCH_SIZE);
2063 * leave some room at the end of the path for appending extra
2066 if (call_prom("package-to-path", 3, 1, node, path,
2067 PROM_SCRATCH_SIZE-10) == PROM_ERROR)
2069 prom_printf("found display : %s, opening... ", path);
2071 ih = call_prom("open", 1, 1, path);
2073 prom_printf("failed\n");
2078 prom_printf("done\n");
2079 prom_setprop(node, path, "linux,opened", NULL, 0);
2081 /* Setup a usable color table when the appropriate
2082 * method is available. Should update this to set-colors */
2083 clut = default_colors;
2084 for (i = 0; i < 16; i++, clut += 3)
2085 if (prom_set_color(ih, i, clut[0], clut[1],
2089 #ifdef CONFIG_LOGO_LINUX_CLUT224
2090 clut = PTRRELOC(logo_linux_clut224.clut);
2091 for (i = 0; i < logo_linux_clut224.clutsize; i++, clut += 3)
2092 if (prom_set_color(ih, i + 32, clut[0], clut[1],
2095 #endif /* CONFIG_LOGO_LINUX_CLUT224 */
2097 #ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
2098 if (prom_getprop(node, "linux,boot-display", NULL, 0) !=
2100 u32 width, height, pitch, addr;
2102 prom_printf("Setting btext !\n");
2103 prom_getprop(node, "width", &width, 4);
2104 prom_getprop(node, "height", &height, 4);
2105 prom_getprop(node, "linebytes", &pitch, 4);
2106 prom_getprop(node, "address", &addr, 4);
2107 prom_printf("W=%d H=%d LB=%d addr=0x%x\n",
2108 width, height, pitch, addr);
2109 btext_setup_display(width, height, 8, pitch, addr);
2111 #endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
2116 /* Return (relocated) pointer to this much memory: moves initrd if reqd. */
2117 static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end,
2118 unsigned long needed, unsigned long align)
2122 *mem_start = _ALIGN(*mem_start, align);
2123 while ((*mem_start + needed) > *mem_end) {
2124 unsigned long room, chunk;
2126 prom_debug("Chunk exhausted, claiming more at %x...\n",
2128 room = alloc_top - alloc_bottom;
2129 if (room > DEVTREE_CHUNK_SIZE)
2130 room = DEVTREE_CHUNK_SIZE;
2131 if (room < PAGE_SIZE)
2132 prom_panic("No memory for flatten_device_tree "
2134 chunk = alloc_up(room, 0);
2136 prom_panic("No memory for flatten_device_tree "
2137 "(claim failed)\n");
2138 *mem_end = chunk + room;
2141 ret = (void *)*mem_start;
2142 *mem_start += needed;
2147 #define dt_push_token(token, mem_start, mem_end) do { \
2148 void *room = make_room(mem_start, mem_end, 4, 4); \
2149 *(__be32 *)room = cpu_to_be32(token); \
2152 static unsigned long __init dt_find_string(char *str)
2156 s = os = (char *)dt_string_start;
2158 while (s < (char *)dt_string_end) {
2159 if (strcmp(s, str) == 0)
2167 * The Open Firmware 1275 specification states properties must be 31 bytes or
2168 * less, however not all firmwares obey this. Make it 64 bytes to be safe.
2170 #define MAX_PROPERTY_NAME 64
2172 static void __init scan_dt_build_strings(phandle node,
2173 unsigned long *mem_start,
2174 unsigned long *mem_end)
2176 char *prev_name, *namep, *sstart;
2180 sstart = (char *)dt_string_start;
2182 /* get and store all property names */
2185 /* 64 is max len of name including nul. */
2186 namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
2187 if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) {
2188 /* No more nodes: unwind alloc */
2189 *mem_start = (unsigned long)namep;
2194 if (strcmp(namep, "name") == 0) {
2195 *mem_start = (unsigned long)namep;
2199 /* get/create string entry */
2200 soff = dt_find_string(namep);
2202 *mem_start = (unsigned long)namep;
2203 namep = sstart + soff;
2205 /* Trim off some if we can */
2206 *mem_start = (unsigned long)namep + strlen(namep) + 1;
2207 dt_string_end = *mem_start;
2212 /* do all our children */
2213 child = call_prom("child", 1, 1, node);
2214 while (child != 0) {
2215 scan_dt_build_strings(child, mem_start, mem_end);
2216 child = call_prom("peer", 1, 1, child);
2220 static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
2221 unsigned long *mem_end)
2224 char *namep, *prev_name, *sstart, *p, *ep, *lp, *path;
2226 unsigned char *valp;
2227 static char pname[MAX_PROPERTY_NAME];
2228 int l, room, has_phandle = 0;
2230 dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
2232 /* get the node's full name */
2233 namep = (char *)*mem_start;
2234 room = *mem_end - *mem_start;
2237 l = call_prom("package-to-path", 3, 1, node, namep, room);
2239 /* Didn't fit? Get more room. */
2241 if (l >= *mem_end - *mem_start)
2242 namep = make_room(mem_start, mem_end, l+1, 1);
2243 call_prom("package-to-path", 3, 1, node, namep, l);
2247 /* Fixup an Apple bug where they have bogus \0 chars in the
2248 * middle of the path in some properties, and extract
2249 * the unit name (everything after the last '/').
2251 for (lp = p = namep, ep = namep + l; p < ep; p++) {
2258 *mem_start = _ALIGN((unsigned long)lp + 1, 4);
2261 /* get it again for debugging */
2262 path = prom_scratch;
2263 memset(path, 0, PROM_SCRATCH_SIZE);
2264 call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1);
2266 /* get and store all properties */
2268 sstart = (char *)dt_string_start;
2270 if (call_prom("nextprop", 3, 1, node, prev_name,
2275 if (strcmp(pname, "name") == 0) {
2280 /* find string offset */
2281 soff = dt_find_string(pname);
2283 prom_printf("WARNING: Can't find string index for"
2284 " <%s>, node %s\n", pname, path);
2287 prev_name = sstart + soff;
2290 l = call_prom("getproplen", 2, 1, node, pname);
2293 if (l == PROM_ERROR)
2296 /* push property head */
2297 dt_push_token(OF_DT_PROP, mem_start, mem_end);
2298 dt_push_token(l, mem_start, mem_end);
2299 dt_push_token(soff, mem_start, mem_end);
2301 /* push property content */
2302 valp = make_room(mem_start, mem_end, l, 4);
2303 call_prom("getprop", 4, 1, node, pname, valp, l);
2304 *mem_start = _ALIGN(*mem_start, 4);
2306 if (!strcmp(pname, "phandle"))
2310 /* Add a "linux,phandle" property if no "phandle" property already
2311 * existed (can happen with OPAL)
2314 soff = dt_find_string("linux,phandle");
2316 prom_printf("WARNING: Can't find string index for"
2317 " <linux-phandle> node %s\n", path);
2319 dt_push_token(OF_DT_PROP, mem_start, mem_end);
2320 dt_push_token(4, mem_start, mem_end);
2321 dt_push_token(soff, mem_start, mem_end);
2322 valp = make_room(mem_start, mem_end, 4, 4);
2323 *(__be32 *)valp = cpu_to_be32(node);
2327 /* do all our children */
2328 child = call_prom("child", 1, 1, node);
2329 while (child != 0) {
2330 scan_dt_build_struct(child, mem_start, mem_end);
2331 child = call_prom("peer", 1, 1, child);
2334 dt_push_token(OF_DT_END_NODE, mem_start, mem_end);
2337 static void __init flatten_device_tree(void)
2340 unsigned long mem_start, mem_end, room;
2341 struct boot_param_header *hdr;
2346 * Check how much room we have between alloc top & bottom (+/- a
2347 * few pages), crop to 1MB, as this is our "chunk" size
2349 room = alloc_top - alloc_bottom - 0x4000;
2350 if (room > DEVTREE_CHUNK_SIZE)
2351 room = DEVTREE_CHUNK_SIZE;
2352 prom_debug("starting device tree allocs at %x\n", alloc_bottom);
2354 /* Now try to claim that */
2355 mem_start = (unsigned long)alloc_up(room, PAGE_SIZE);
2357 prom_panic("Can't allocate initial device-tree chunk\n");
2358 mem_end = mem_start + room;
2360 /* Get root of tree */
2361 root = call_prom("peer", 1, 1, (phandle)0);
2362 if (root == (phandle)0)
2363 prom_panic ("couldn't get device tree root\n");
2365 /* Build header and make room for mem rsv map */
2366 mem_start = _ALIGN(mem_start, 4);
2367 hdr = make_room(&mem_start, &mem_end,
2368 sizeof(struct boot_param_header), 4);
2369 dt_header_start = (unsigned long)hdr;
2370 rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8);
2372 /* Start of strings */
2373 mem_start = PAGE_ALIGN(mem_start);
2374 dt_string_start = mem_start;
2375 mem_start += 4; /* hole */
2377 /* Add "linux,phandle" in there, we'll need it */
2378 namep = make_room(&mem_start, &mem_end, 16, 1);
2379 strcpy(namep, "linux,phandle");
2380 mem_start = (unsigned long)namep + strlen(namep) + 1;
2382 /* Build string array */
2383 prom_printf("Building dt strings...\n");
2384 scan_dt_build_strings(root, &mem_start, &mem_end);
2385 dt_string_end = mem_start;
2387 /* Build structure */
2388 mem_start = PAGE_ALIGN(mem_start);
2389 dt_struct_start = mem_start;
2390 prom_printf("Building dt structure...\n");
2391 scan_dt_build_struct(root, &mem_start, &mem_end);
2392 dt_push_token(OF_DT_END, &mem_start, &mem_end);
2393 dt_struct_end = PAGE_ALIGN(mem_start);
2396 hdr->boot_cpuid_phys = cpu_to_be32(prom.cpu);
2397 hdr->magic = cpu_to_be32(OF_DT_HEADER);
2398 hdr->totalsize = cpu_to_be32(dt_struct_end - dt_header_start);
2399 hdr->off_dt_struct = cpu_to_be32(dt_struct_start - dt_header_start);
2400 hdr->off_dt_strings = cpu_to_be32(dt_string_start - dt_header_start);
2401 hdr->dt_strings_size = cpu_to_be32(dt_string_end - dt_string_start);
2402 hdr->off_mem_rsvmap = cpu_to_be32(((unsigned long)rsvmap) - dt_header_start);
2403 hdr->version = cpu_to_be32(OF_DT_VERSION);
2404 /* Version 16 is not backward compatible */
2405 hdr->last_comp_version = cpu_to_be32(0x10);
2407 /* Copy the reserve map in */
2408 memcpy(rsvmap, mem_reserve_map, sizeof(mem_reserve_map));
2413 prom_printf("reserved memory map:\n");
2414 for (i = 0; i < mem_reserve_cnt; i++)
2415 prom_printf(" %x - %x\n",
2416 be64_to_cpu(mem_reserve_map[i].base),
2417 be64_to_cpu(mem_reserve_map[i].size));
2420 /* Bump mem_reserve_cnt to cause further reservations to fail
2421 * since it's too late.
2423 mem_reserve_cnt = MEM_RESERVE_MAP_SIZE;
2425 prom_printf("Device tree strings 0x%x -> 0x%x\n",
2426 dt_string_start, dt_string_end);
2427 prom_printf("Device tree struct 0x%x -> 0x%x\n",
2428 dt_struct_start, dt_struct_end);
2431 #ifdef CONFIG_PPC_MAPLE
2432 /* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
2433 * The values are bad, and it doesn't even have the right number of cells. */
2434 static void __init fixup_device_tree_maple(void)
2437 u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
2441 name = "/ht@0/isa@4";
2442 isa = call_prom("finddevice", 1, 1, ADDR(name));
2443 if (!PHANDLE_VALID(isa)) {
2444 name = "/ht@0/isa@6";
2445 isa = call_prom("finddevice", 1, 1, ADDR(name));
2446 rloc = 0x01003000; /* IO space; PCI device = 6 */
2448 if (!PHANDLE_VALID(isa))
2451 if (prom_getproplen(isa, "ranges") != 12)
2453 if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
2457 if (isa_ranges[0] != 0x1 ||
2458 isa_ranges[1] != 0xf4000000 ||
2459 isa_ranges[2] != 0x00010000)
2462 prom_printf("Fixing up bogus ISA range on Maple/Apache...\n");
2464 isa_ranges[0] = 0x1;
2465 isa_ranges[1] = 0x0;
2466 isa_ranges[2] = rloc;
2467 isa_ranges[3] = 0x0;
2468 isa_ranges[4] = 0x0;
2469 isa_ranges[5] = 0x00010000;
2470 prom_setprop(isa, name, "ranges",
2471 isa_ranges, sizeof(isa_ranges));
2474 #define CPC925_MC_START 0xf8000000
2475 #define CPC925_MC_LENGTH 0x1000000
2476 /* The values for memory-controller don't have right number of cells */
2477 static void __init fixup_device_tree_maple_memory_controller(void)
2481 char *name = "/hostbridge@f8000000";
2484 mc = call_prom("finddevice", 1, 1, ADDR(name));
2485 if (!PHANDLE_VALID(mc))
2488 if (prom_getproplen(mc, "reg") != 8)
2491 prom_getprop(prom.root, "#address-cells", &ac, sizeof(ac));
2492 prom_getprop(prom.root, "#size-cells", &sc, sizeof(sc));
2493 if ((ac != 2) || (sc != 2))
2496 if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR)
2499 if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH)
2502 prom_printf("Fixing up bogus hostbridge on Maple...\n");
2505 mc_reg[1] = CPC925_MC_START;
2507 mc_reg[3] = CPC925_MC_LENGTH;
2508 prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg));
2511 #define fixup_device_tree_maple()
2512 #define fixup_device_tree_maple_memory_controller()
2515 #ifdef CONFIG_PPC_CHRP
2517 * Pegasos and BriQ lacks the "ranges" property in the isa node
2518 * Pegasos needs decimal IRQ 14/15, not hexadecimal
2519 * Pegasos has the IDE configured in legacy mode, but advertised as native
2521 static void __init fixup_device_tree_chrp(void)
2525 u32 rloc = 0x01006000; /* IO space; PCI device = 12 */
2529 name = "/pci@80000000/isa@c";
2530 ph = call_prom("finddevice", 1, 1, ADDR(name));
2531 if (!PHANDLE_VALID(ph)) {
2532 name = "/pci@ff500000/isa@6";
2533 ph = call_prom("finddevice", 1, 1, ADDR(name));
2534 rloc = 0x01003000; /* IO space; PCI device = 6 */
2536 if (PHANDLE_VALID(ph)) {
2537 rc = prom_getproplen(ph, "ranges");
2538 if (rc == 0 || rc == PROM_ERROR) {
2539 prom_printf("Fixing up missing ISA range on Pegasos...\n");
2546 prop[5] = 0x00010000;
2547 prom_setprop(ph, name, "ranges", prop, sizeof(prop));
2551 name = "/pci@80000000/ide@C,1";
2552 ph = call_prom("finddevice", 1, 1, ADDR(name));
2553 if (PHANDLE_VALID(ph)) {
2554 prom_printf("Fixing up IDE interrupt on Pegasos...\n");
2557 prom_setprop(ph, name, "interrupts", prop, 2*sizeof(u32));
2558 prom_printf("Fixing up IDE class-code on Pegasos...\n");
2559 rc = prom_getprop(ph, "class-code", prop, sizeof(u32));
2560 if (rc == sizeof(u32)) {
2562 prom_setprop(ph, name, "class-code", prop, sizeof(u32));
2567 #define fixup_device_tree_chrp()
2570 #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
2571 static void __init fixup_device_tree_pmac(void)
2573 phandle u3, i2c, mpic;
2578 /* Some G5s have a missing interrupt definition, fix it up here */
2579 u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
2580 if (!PHANDLE_VALID(u3))
2582 i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
2583 if (!PHANDLE_VALID(i2c))
2585 mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
2586 if (!PHANDLE_VALID(mpic))
2589 /* check if proper rev of u3 */
2590 if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
2593 if (u3_rev < 0x35 || u3_rev > 0x39)
2595 /* does it need fixup ? */
2596 if (prom_getproplen(i2c, "interrupts") > 0)
2599 prom_printf("fixing up bogus interrupts for u3 i2c...\n");
2601 /* interrupt on this revision of u3 is number 0 and level */
2604 prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts",
2605 &interrupts, sizeof(interrupts));
2607 prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
2608 &parent, sizeof(parent));
2611 #define fixup_device_tree_pmac()
2614 #ifdef CONFIG_PPC_EFIKA
2616 * The MPC5200 FEC driver requires an phy-handle property to tell it how
2617 * to talk to the phy. If the phy-handle property is missing, then this
2618 * function is called to add the appropriate nodes and link it to the
2621 static void __init fixup_device_tree_efika_add_phy(void)
2627 /* Check if /builtin/ethernet exists - bail if it doesn't */
2628 node = call_prom("finddevice", 1, 1, ADDR("/builtin/ethernet"));
2629 if (!PHANDLE_VALID(node))
2632 /* Check if the phy-handle property exists - bail if it does */
2633 rv = prom_getprop(node, "phy-handle", prop, sizeof(prop));
2638 * At this point the ethernet device doesn't have a phy described.
2639 * Now we need to add the missing phy node and linkage
2642 /* Check for an MDIO bus node - if missing then create one */
2643 node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
2644 if (!PHANDLE_VALID(node)) {
2645 prom_printf("Adding Ethernet MDIO node\n");
2646 call_prom("interpret", 1, 1,
2647 " s\" /builtin\" find-device"
2649 " 1 encode-int s\" #address-cells\" property"
2650 " 0 encode-int s\" #size-cells\" property"
2651 " s\" mdio\" device-name"
2652 " s\" fsl,mpc5200b-mdio\" encode-string"
2653 " s\" compatible\" property"
2654 " 0xf0003000 0x400 reg"
2656 " 0x5 encode-int encode+"
2657 " 0x3 encode-int encode+"
2658 " s\" interrupts\" property"
2662 /* Check for a PHY device node - if missing then create one and
2663 * give it's phandle to the ethernet node */
2664 node = call_prom("finddevice", 1, 1,
2665 ADDR("/builtin/mdio/ethernet-phy"));
2666 if (!PHANDLE_VALID(node)) {
2667 prom_printf("Adding Ethernet PHY node\n");
2668 call_prom("interpret", 1, 1,
2669 " s\" /builtin/mdio\" find-device"
2671 " s\" ethernet-phy\" device-name"
2672 " 0x10 encode-int s\" reg\" property"
2676 " s\" /builtin/ethernet\" find-device"
2678 " s\" phy-handle\" property"
2683 static void __init fixup_device_tree_efika(void)
2685 int sound_irq[3] = { 2, 2, 0 };
2686 int bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0,
2687 3,4,0, 3,5,0, 3,6,0, 3,7,0,
2688 3,8,0, 3,9,0, 3,10,0, 3,11,0,
2689 3,12,0, 3,13,0, 3,14,0, 3,15,0 };
2694 /* Check if we're really running on a EFIKA */
2695 node = call_prom("finddevice", 1, 1, ADDR("/"));
2696 if (!PHANDLE_VALID(node))
2699 rv = prom_getprop(node, "model", prop, sizeof(prop));
2700 if (rv == PROM_ERROR)
2702 if (strcmp(prop, "EFIKA5K2"))
2705 prom_printf("Applying EFIKA device tree fixups\n");
2707 /* Claiming to be 'chrp' is death */
2708 node = call_prom("finddevice", 1, 1, ADDR("/"));
2709 rv = prom_getprop(node, "device_type", prop, sizeof(prop));
2710 if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
2711 prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
2713 /* CODEGEN,description is exposed in /proc/cpuinfo so
2715 rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
2716 if (rv != PROM_ERROR && (strstr(prop, "CHRP")))
2717 prom_setprop(node, "/", "CODEGEN,description",
2718 "Efika 5200B PowerPC System",
2719 sizeof("Efika 5200B PowerPC System"));
2721 /* Fixup bestcomm interrupts property */
2722 node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
2723 if (PHANDLE_VALID(node)) {
2724 len = prom_getproplen(node, "interrupts");
2726 prom_printf("Fixing bestcomm interrupts property\n");
2727 prom_setprop(node, "/builtin/bestcom", "interrupts",
2728 bcomm_irq, sizeof(bcomm_irq));
2732 /* Fixup sound interrupts property */
2733 node = call_prom("finddevice", 1, 1, ADDR("/builtin/sound"));
2734 if (PHANDLE_VALID(node)) {
2735 rv = prom_getprop(node, "interrupts", prop, sizeof(prop));
2736 if (rv == PROM_ERROR) {
2737 prom_printf("Adding sound interrupts property\n");
2738 prom_setprop(node, "/builtin/sound", "interrupts",
2739 sound_irq, sizeof(sound_irq));
2743 /* Make sure ethernet phy-handle property exists */
2744 fixup_device_tree_efika_add_phy();
2747 #define fixup_device_tree_efika()
2750 #ifdef CONFIG_PPC_PASEMI_NEMO
2752 * CFE supplied on Nemo is broken in several ways, biggest
2753 * problem is that it reassigns ISA interrupts to unused mpic ints.
2754 * Add an interrupt-controller property for the io-bridge to use
2755 * and correct the ints so we can attach them to an irq_domain
2757 static void __init fixup_device_tree_pasemi(void)
2759 u32 interrupts[2], parent, rval, val = 0;
2760 char *name, *pci_name;
2763 /* Find the root pci node */
2764 name = "/pxp@0,e0000000";
2765 iob = call_prom("finddevice", 1, 1, ADDR(name));
2766 if (!PHANDLE_VALID(iob))
2769 /* check if interrupt-controller node set yet */
2770 if (prom_getproplen(iob, "interrupt-controller") !=PROM_ERROR)
2773 prom_printf("adding interrupt-controller property for SB600...\n");
2775 prom_setprop(iob, name, "interrupt-controller", &val, 0);
2777 pci_name = "/pxp@0,e0000000/pci@11";
2778 node = call_prom("finddevice", 1, 1, ADDR(pci_name));
2781 for( ; prom_next_node(&node); ) {
2782 /* scan each node for one with an interrupt */
2783 if (!PHANDLE_VALID(node))
2786 rval = prom_getproplen(node, "interrupts");
2787 if (rval == 0 || rval == PROM_ERROR)
2790 prom_getprop(node, "interrupts", &interrupts, sizeof(interrupts));
2791 if ((interrupts[0] < 212) || (interrupts[0] > 222))
2794 /* found a node, update both interrupts and interrupt-parent */
2795 if ((interrupts[0] >= 212) && (interrupts[0] <= 215))
2796 interrupts[0] -= 203;
2797 if ((interrupts[0] >= 216) && (interrupts[0] <= 220))
2798 interrupts[0] -= 213;
2799 if (interrupts[0] == 221)
2801 if (interrupts[0] == 222)
2804 prom_setprop(node, pci_name, "interrupts", interrupts,
2805 sizeof(interrupts));
2806 prom_setprop(node, pci_name, "interrupt-parent", &parent,
2811 * The io-bridge has device_type set to 'io-bridge' change it to 'isa'
2812 * so that generic isa-bridge code can add the SB600 and its on-board
2815 name = "/pxp@0,e0000000/io-bridge@0";
2816 iob = call_prom("finddevice", 1, 1, ADDR(name));
2817 if (!PHANDLE_VALID(iob))
2820 /* device_type is already set, just change it. */
2822 prom_printf("Changing device_type of SB600 node...\n");
2824 prom_setprop(iob, name, "device_type", "isa", sizeof("isa"));
2826 #else /* !CONFIG_PPC_PASEMI_NEMO */
2827 static inline void fixup_device_tree_pasemi(void) { }
2830 static void __init fixup_device_tree(void)
2832 fixup_device_tree_maple();
2833 fixup_device_tree_maple_memory_controller();
2834 fixup_device_tree_chrp();
2835 fixup_device_tree_pmac();
2836 fixup_device_tree_efika();
2837 fixup_device_tree_pasemi();
2840 static void __init prom_find_boot_cpu(void)
2847 if (prom_getprop(prom.chosen, "cpu", &rval, sizeof(rval)) <= 0)
2849 prom_cpu = be32_to_cpu(rval);
2851 cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
2853 if (!PHANDLE_VALID(cpu_pkg))
2856 prom_getprop(cpu_pkg, "reg", &rval, sizeof(rval));
2857 prom.cpu = be32_to_cpu(rval);
2859 prom_debug("Booting CPU hw index = %lu\n", prom.cpu);
2862 static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
2864 #ifdef CONFIG_BLK_DEV_INITRD
2865 if (r3 && r4 && r4 != 0xdeadbeef) {
2868 prom_initrd_start = is_kernel_addr(r3) ? __pa(r3) : r3;
2869 prom_initrd_end = prom_initrd_start + r4;
2871 val = cpu_to_be64(prom_initrd_start);
2872 prom_setprop(prom.chosen, "/chosen", "linux,initrd-start",
2874 val = cpu_to_be64(prom_initrd_end);
2875 prom_setprop(prom.chosen, "/chosen", "linux,initrd-end",
2878 reserve_mem(prom_initrd_start,
2879 prom_initrd_end - prom_initrd_start);
2881 prom_debug("initrd_start=0x%x\n", prom_initrd_start);
2882 prom_debug("initrd_end=0x%x\n", prom_initrd_end);
2884 #endif /* CONFIG_BLK_DEV_INITRD */
2888 #ifdef CONFIG_RELOCATABLE
2889 static void reloc_toc(void)
2893 static void unreloc_toc(void)
2897 static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
2900 unsigned long *toc_entry;
2902 /* Get the start of the TOC by using r2 directly. */
2903 asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
2905 for (i = 0; i < nr_entries; i++) {
2906 *toc_entry = *toc_entry + offset;
2911 static void reloc_toc(void)
2913 unsigned long offset = reloc_offset();
2914 unsigned long nr_entries =
2915 (__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
2917 __reloc_toc(offset, nr_entries);
2922 static void unreloc_toc(void)
2924 unsigned long offset = reloc_offset();
2925 unsigned long nr_entries =
2926 (__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
2930 __reloc_toc(-offset, nr_entries);
2936 * We enter here early on, when the Open Firmware prom is still
2937 * handling exceptions and the MMU hash table for us.
2940 unsigned long __init prom_init(unsigned long r3, unsigned long r4,
2942 unsigned long r6, unsigned long r7,
2943 unsigned long kbase)
2948 unsigned long offset = reloc_offset();
2955 * First zero the BSS
2957 memset(&__bss_start, 0, __bss_stop - __bss_start);
2960 * Init interface to Open Firmware, get some node references,
2963 prom_init_client_services(pp);
2966 * See if this OF is old enough that we need to do explicit maps
2967 * and other workarounds
2972 * Init prom stdout device
2976 prom_printf("Preparing to boot %s", linux_banner);
2979 * Get default machine type. At this point, we do not differentiate
2980 * between pSeries SMP and pSeries LPAR
2982 of_platform = prom_find_machine_type();
2983 prom_printf("Detected machine type: %x\n", of_platform);
2985 #ifndef CONFIG_NONSTATIC_KERNEL
2986 /* Bail if this is a kdump kernel. */
2987 if (PHYSICAL_START > 0)
2988 prom_panic("Error: You can't boot a kdump kernel from OF!\n");
2992 * Check for an initrd
2994 prom_check_initrd(r3, r4);
2996 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
2998 * On pSeries, inform the firmware about our capabilities
3000 if (of_platform == PLATFORM_PSERIES ||
3001 of_platform == PLATFORM_PSERIES_LPAR)
3002 prom_send_capabilities();
3006 * Copy the CPU hold code
3008 if (of_platform != PLATFORM_POWERMAC)
3009 copy_and_flush(0, kbase, 0x100, 0);
3012 * Do early parsing of command line
3014 early_cmdline_parse();
3017 * Initialize memory management within prom_init
3022 * Determine which cpu is actually running right _now_
3024 prom_find_boot_cpu();
3027 * Initialize display devices
3029 prom_check_displays();
3031 #if defined(CONFIG_PPC64) && defined(__BIG_ENDIAN__)
3033 * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
3034 * that uses the allocator, we need to make sure we get the top of memory
3035 * available for us here...
3037 if (of_platform == PLATFORM_PSERIES)
3038 prom_initialize_tce_table();
3042 * On non-powermacs, try to instantiate RTAS. PowerMacs don't
3043 * have a usable RTAS implementation.
3045 if (of_platform != PLATFORM_POWERMAC &&
3046 of_platform != PLATFORM_OPAL)
3047 prom_instantiate_rtas();
3049 #ifdef CONFIG_PPC_POWERNV
3050 if (of_platform == PLATFORM_OPAL)
3051 prom_instantiate_opal();
3052 #endif /* CONFIG_PPC_POWERNV */
3055 /* instantiate sml */
3056 prom_instantiate_sml();
3060 * On non-powermacs, put all CPUs in spin-loops.
3062 * PowerMacs use a different mechanism to spin CPUs
3064 * (This must be done after instanciating RTAS)
3066 if (of_platform != PLATFORM_POWERMAC &&
3067 of_platform != PLATFORM_OPAL)
3071 * Fill in some infos for use by the kernel later on
3073 if (prom_memory_limit) {
3074 __be64 val = cpu_to_be64(prom_memory_limit);
3075 prom_setprop(prom.chosen, "/chosen", "linux,memory-limit",
3080 prom_setprop(prom.chosen, "/chosen", "linux,iommu-off",
3083 if (prom_iommu_force_on)
3084 prom_setprop(prom.chosen, "/chosen", "linux,iommu-force-on",
3087 if (prom_tce_alloc_start) {
3088 prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-start",
3089 &prom_tce_alloc_start,
3090 sizeof(prom_tce_alloc_start));
3091 prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-end",
3092 &prom_tce_alloc_end,
3093 sizeof(prom_tce_alloc_end));
3098 * Fixup any known bugs in the device-tree
3100 fixup_device_tree();
3103 * Now finally create the flattened device-tree
3105 prom_printf("copying OF device tree...\n");
3106 flatten_device_tree();
3109 * in case stdin is USB and still active on IBM machines...
3110 * Unfortunately quiesce crashes on some powermacs if we have
3111 * closed stdin already (in particular the powerbook 101). It
3112 * appears that the OPAL version of OFW doesn't like it either.
3114 if (of_platform != PLATFORM_POWERMAC &&
3115 of_platform != PLATFORM_OPAL)
3119 * Call OF "quiesce" method to shut down pending DMA's from
3122 prom_printf("Quiescing Open Firmware ...\n");
3123 call_prom("quiesce", 0, 0);
3126 * And finally, call the kernel passing it the flattened device
3127 * tree and NULL as r5, thus triggering the new entry point which
3128 * is common to us and kexec
3130 hdr = dt_header_start;
3132 /* Don't print anything after quiesce under OPAL, it crashes OFW */
3133 if (of_platform != PLATFORM_OPAL) {
3134 prom_printf("Booting Linux via __start() @ 0x%lx ...\n", kbase);
3135 prom_debug("->dt_header_start=0x%x\n", hdr);
3139 reloc_got2(-offset);
3144 #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
3145 /* OPAL early debug gets the OPAL base & entry in r8 and r9 */
3146 __start(hdr, kbase, 0, 0, 0,
3147 prom_opal_base, prom_opal_entry);
3149 __start(hdr, kbase, 0, 0, 0, 0, 0);