]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/net/xilinx_emaclite.c
new at91_emac network driver (NET_MULTI api)
[karo-tx-uboot.git] / drivers / net / xilinx_emaclite.c
1 /*
2  * (C) Copyright 2007-2009 Michal Simek
3  * (C) Copyright 2003 Xilinx Inc.
4  *
5  * Michal SIMEK <monstr@monstr.eu>
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #include <common.h>
27 #include <net.h>
28 #include <config.h>
29 #include <asm/io.h>
30
31 #undef DEBUG
32
33 #define ENET_MAX_MTU            PKTSIZE
34 #define ENET_MAX_MTU_ALIGNED    PKTSIZE_ALIGN
35 #define ENET_ADDR_LENGTH        6
36
37 /* EmacLite constants */
38 #define XEL_BUFFER_OFFSET       0x0800  /* Next buffer's offset */
39 #define XEL_TPLR_OFFSET         0x07F4  /* Tx packet length */
40 #define XEL_TSR_OFFSET          0x07FC  /* Tx status */
41 #define XEL_RSR_OFFSET          0x17FC  /* Rx status */
42 #define XEL_RXBUFF_OFFSET       0x1000  /* Receive Buffer */
43
44 /* Xmit complete */
45 #define XEL_TSR_XMIT_BUSY_MASK          0x00000001UL
46 /* Xmit interrupt enable bit */
47 #define XEL_TSR_XMIT_IE_MASK            0x00000008UL
48 /* Buffer is active, SW bit only */
49 #define XEL_TSR_XMIT_ACTIVE_MASK        0x80000000UL
50 /* Program the MAC address */
51 #define XEL_TSR_PROGRAM_MASK            0x00000002UL
52 /* define for programming the MAC address into the EMAC Lite */
53 #define XEL_TSR_PROG_MAC_ADDR   (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
54
55 /* Transmit packet length upper byte */
56 #define XEL_TPLR_LENGTH_MASK_HI         0x0000FF00UL
57 /* Transmit packet length lower byte */
58 #define XEL_TPLR_LENGTH_MASK_LO         0x000000FFUL
59
60 /* Recv complete */
61 #define XEL_RSR_RECV_DONE_MASK          0x00000001UL
62 /* Recv interrupt enable bit */
63 #define XEL_RSR_RECV_IE_MASK            0x00000008UL
64
65 typedef struct {
66         unsigned int baseaddress;       /* Base address for device (IPIF) */
67         unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
68         unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
69         unsigned char deviceid;         /* Unique ID of device - for future */
70 } xemaclite;
71
72 static xemaclite emaclite;
73
74 static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
75
76 /* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
77 #ifdef CONFIG_ENV_IS_NOWHERE
78 static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
79 #else
80 static u8 emacaddr[ENET_ADDR_LENGTH];
81 #endif
82
83 void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
84 {
85         unsigned int i;
86         u32 alignbuffer;
87         u32 *to32ptr;
88         u32 *from32ptr;
89         u8 *to8ptr;
90         u8 *from8ptr;
91
92         from32ptr = (u32 *) srcptr;
93
94         /* Word aligned buffer, no correction needed. */
95         to32ptr = (u32 *) destptr;
96         while (bytecount > 3) {
97                 *to32ptr++ = *from32ptr++;
98                 bytecount -= 4;
99         }
100         to8ptr = (u8 *) to32ptr;
101
102         alignbuffer = *from32ptr++;
103         from8ptr = (u8 *) & alignbuffer;
104
105         for (i = 0; i < bytecount; i++) {
106                 *to8ptr++ = *from8ptr++;
107         }
108 }
109
110 void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
111 {
112         unsigned i;
113         u32 alignbuffer;
114         u32 *to32ptr = (u32 *) destptr;
115         u32 *from32ptr;
116         u8 *to8ptr;
117         u8 *from8ptr;
118
119         from32ptr = (u32 *) srcptr;
120         while (bytecount > 3) {
121
122                 *to32ptr++ = *from32ptr++;
123                 bytecount -= 4;
124         }
125
126         alignbuffer = 0;
127         to8ptr = (u8 *) & alignbuffer;
128         from8ptr = (u8 *) from32ptr;
129
130         for (i = 0; i < bytecount; i++) {
131                 *to8ptr++ = *from8ptr++;
132         }
133
134         *to32ptr++ = alignbuffer;
135 }
136
137 void eth_halt (void)
138 {
139         debug ("eth_halt\n");
140 }
141
142 int eth_init (bd_t * bis)
143 {
144         uchar enetaddr[6];
145
146         debug ("EmacLite Initialization Started\n");
147         memset (&emaclite, 0, sizeof (xemaclite));
148         emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
149
150         if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
151                 memcpy(enetaddr, emacaddr, ENET_ADDR_LENGTH);
152                 eth_setenv_enetaddr("ethaddr", enetaddr);
153         }
154
155 /*
156  * TX - TX_PING & TX_PONG initialization
157  */
158         /* Restart PING TX */
159         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
160         /* Copy MAC address */
161         xemaclite_alignedwrite (enetaddr,
162                 emaclite.baseaddress, ENET_ADDR_LENGTH);
163         /* Set the length */
164         out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
165         /* Update the MAC address in the EMAC Lite */
166         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
167         /* Wait for EMAC Lite to finish with the MAC address update */
168         while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
169                 XEL_TSR_PROG_MAC_ADDR) != 0) ;
170
171 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
172         /* The same operation with PONG TX */
173         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
174         xemaclite_alignedwrite (enetaddr, emaclite.baseaddress +
175                 XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
176         out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
177         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
178                 XEL_TSR_PROG_MAC_ADDR);
179         while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
180                 XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
181 #endif
182
183 /*
184  * RX - RX_PING & RX_PONG initialization
185  */
186         /* Write out the value to flush the RX buffer */
187         out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
188 #ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
189         out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
190                 XEL_RSR_RECV_IE_MASK);
191 #endif
192
193         debug ("EmacLite Initialization complete\n");
194         return 0;
195 }
196
197 int xemaclite_txbufferavailable (xemaclite * instanceptr)
198 {
199         u32 reg;
200         u32 txpingbusy;
201         u32 txpongbusy;
202         /*
203          * Read the other buffer register
204          * and determine if the other buffer is available
205          */
206         reg = in_be32 (instanceptr->baseaddress +
207                         instanceptr->nexttxbuffertouse + 0);
208         txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
209                         XEL_TSR_XMIT_BUSY_MASK);
210
211         reg = in_be32 (instanceptr->baseaddress +
212                         (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
213         txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
214                         XEL_TSR_XMIT_BUSY_MASK);
215
216         return (!(txpingbusy && txpongbusy));
217 }
218
219 int eth_send (volatile void *ptr, int len) {
220
221         unsigned int reg;
222         unsigned int baseaddress;
223
224         unsigned maxtry = 1000;
225
226         if (len > ENET_MAX_MTU)
227                 len = ENET_MAX_MTU;
228
229         while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
230                 udelay (10);
231                 maxtry--;
232         }
233
234         if (!maxtry) {
235                 printf ("Error: Timeout waiting for ethernet TX buffer\n");
236                 /* Restart PING TX */
237                 out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
238 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
239                 out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
240                 XEL_BUFFER_OFFSET, 0);
241 #endif
242                 return 0;
243         }
244
245         /* Determine the expected TX buffer address */
246         baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
247
248         /* Determine if the expected buffer address is empty */
249         reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
250         if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
251                 && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
252                         & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
253
254 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
255                 emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
256 #endif
257                 debug ("Send packet from 0x%x\n", baseaddress);
258                 /* Write the frame to the buffer */
259                 xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
260                 out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
261                         (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
262                 reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
263                 reg |= XEL_TSR_XMIT_BUSY_MASK;
264                 if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
265                         reg |= XEL_TSR_XMIT_ACTIVE_MASK;
266                 }
267                 out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
268                 return 1;
269         }
270 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
271         /* Switch to second buffer */
272         baseaddress ^= XEL_BUFFER_OFFSET;
273         /* Determine if the expected buffer address is empty */
274         reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
275         if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
276                 && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
277                         & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
278                 debug ("Send packet from 0x%x\n", baseaddress);
279                 /* Write the frame to the buffer */
280                 xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
281                 out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
282                         (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
283                 reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
284                 reg |= XEL_TSR_XMIT_BUSY_MASK;
285                 if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
286                         reg |= XEL_TSR_XMIT_ACTIVE_MASK;
287                 }
288                 out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
289                 return 1;
290         }
291 #endif
292         puts ("Error while sending frame\n");
293         return 0;
294 }
295
296 int eth_rx (void)
297 {
298         unsigned int length;
299         unsigned int reg;
300         unsigned int baseaddress;
301
302         baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
303         reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
304         debug ("Testing data at address 0x%x\n", baseaddress);
305         if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
306 #ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
307                 emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
308 #endif
309         } else {
310 #ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
311                 debug ("No data was available - address 0x%x\n", baseaddress);
312                 return 0;
313 #else
314                 baseaddress ^= XEL_BUFFER_OFFSET;
315                 reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
316                 if ((reg & XEL_RSR_RECV_DONE_MASK) !=
317                                         XEL_RSR_RECV_DONE_MASK) {
318                         debug ("No data was available - address 0x%x\n",
319                                         baseaddress);
320                         return 0;
321                 }
322 #endif
323         }
324         /* Get the length of the frame that arrived */
325         switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
326                         0xFFFF0000 ) >> 16) {
327                 case 0x806:
328                         length = 42 + 20; /* FIXME size of ARP */
329                         debug ("ARP Packet\n");
330                         break;
331                 case 0x800:
332                         length = 14 + 14 +
333                         (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
334                         0xFFFF0000) >> 16); /* FIXME size of IP packet */
335                         debug ("IP Packet\n");
336                         break;
337                 default:
338                         debug ("Other Packet\n");
339                         length = ENET_MAX_MTU;
340                         break;
341         }
342
343         xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
344                         etherrxbuff, length);
345
346         /* Acknowledge the frame */
347         reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
348         reg &= ~XEL_RSR_RECV_DONE_MASK;
349         out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
350
351         debug ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
352         NetReceive ((uchar *) etherrxbuff, length);
353         return 1;
354
355 }