2 bool "Voltage and Current Regulator Support"
4 Generic Voltage and Current Regulator support.
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
26 config REGULATOR_DEBUG
27 bool "Regulator debug support"
29 Say yes here to enable debugging support.
31 config REGULATOR_FIXED_VOLTAGE
32 tristate "Fixed voltage regulator support"
34 This driver provides support for fixed voltage regulators,
35 useful for systems which use a combination of software
36 managed regulators and simple non-configurable regulators.
38 config REGULATOR_VIRTUAL_CONSUMER
39 tristate "Virtual regulator consumer support"
41 This driver provides a virtual consumer for the voltage and
42 current regulator API which provides sysfs controls for
43 configuring the supplies requested. This is mainly useful
48 config REGULATOR_USERSPACE_CONSUMER
49 tristate "Userspace regulator consumer support"
51 There are some classes of devices that are controlled entirely
52 from user space. Userspace consumer driver provides ability to
53 control power supplies for such devices.
57 config REGULATOR_88PM800
58 tristate "Marvell 88PM800 Power regulators"
59 depends on MFD_88PM800
61 This driver supports Marvell 88PM800 voltage regulator chips.
62 It delivers digitally programmable output,
63 the voltage is programmed via I2C interface.
64 It's suitable to support PXA988 chips to control VCC_MAIN and
67 config REGULATOR_88PM8607
68 tristate "Marvell 88PM8607 Power regulators"
69 depends on MFD_88PM860X=y
71 This driver supports 88PM8607 voltage regulator chips.
73 config REGULATOR_ACT8865
74 tristate "Active-semi act8865 voltage regulator"
78 This driver controls a active-semi act8865 voltage output
79 regulator via I2C bus.
81 config REGULATOR_AD5398
82 tristate "Analog Devices AD5398/AD5821 regulators"
85 This driver supports AD5398 and AD5821 current regulator chips.
86 If building into module, its name is ad5398.ko.
88 config REGULATOR_ANATOP
89 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
92 Say y here to support Freescale i.MX on-chip ANATOP LDOs
93 regulators. It is recommended that this option be
94 enabled on i.MX6 platform.
96 config REGULATOR_AAT2870
97 tristate "AnalogicTech AAT2870 Regulators"
98 depends on MFD_AAT2870_CORE
100 If you have a AnalogicTech AAT2870 say Y to enable the
103 config REGULATOR_AB3100
104 tristate "ST-Ericsson AB3100 Regulator functions"
105 depends on AB3100_CORE
106 default y if AB3100_CORE
108 These regulators correspond to functionality in the
109 AB3100 analog baseband dealing with power regulators
112 config REGULATOR_AB8500
113 bool "ST-Ericsson AB8500 Power Regulators"
114 depends on AB8500_CORE
116 This driver supports the regulators found on the ST-Ericsson mixed
119 config REGULATOR_ARIZONA
120 tristate "Wolfson Arizona class devices"
121 depends on MFD_ARIZONA
124 Support for the regulators found on Wolfson Arizona class
127 config REGULATOR_AS3711
128 tristate "AS3711 PMIC"
129 depends on MFD_AS3711
131 This driver provides support for the voltage regulators on the
134 config REGULATOR_AS3722
135 tristate "AMS AS3722 PMIC Regulators"
136 depends on MFD_AS3722
138 This driver provides support for the voltage regulators on the
139 AS3722 PMIC. This will enable support for all the software
140 controllable DCDC/LDO regulators.
142 config REGULATOR_AXP20X
143 tristate "X-POWERS AXP20X PMIC Regulators"
144 depends on MFD_AXP20X
146 This driver provides support for the voltage regulators on the
149 config REGULATOR_BCM590XX
150 tristate "Broadcom BCM590xx PMU Regulators"
151 depends on MFD_BCM590XX
153 This driver provides support for the voltage regulators on the
154 BCM590xx PMUs. This will enable support for the software
155 controllable LDO/Switching regulators.
157 config REGULATOR_DA903X
158 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
159 depends on PMIC_DA903X
161 Say y here to support the BUCKs and LDOs regulators found on
162 Dialog Semiconductor DA9030/DA9034 PMIC.
164 config REGULATOR_DA9052
165 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
166 depends on PMIC_DA9052
168 This driver supports the voltage regulators of DA9052-BC and
171 config REGULATOR_DA9055
172 tristate "Dialog Semiconductor DA9055 regulators"
173 depends on MFD_DA9055
175 Say y here to support the BUCKs and LDOs regulators found on
176 Dialog Semiconductor DA9055 PMIC.
178 This driver can also be built as a module. If so, the module
179 will be called da9055-regulator.
181 config REGULATOR_DA9062
182 tristate "Dialog Semiconductor DA9062 regulators"
183 depends on MFD_DA9062
185 Say y here to support the BUCKs and LDOs regulators found on
188 This driver can also be built as a module. If so, the module
189 will be called da9062-regulator.
191 config REGULATOR_DA9063
192 tristate "Dialog Semiconductor DA9063 regulators"
193 depends on MFD_DA9063
195 Say y here to support the BUCKs and LDOs regulators found on
198 This driver can also be built as a module. If so, the module
199 will be called da9063-regulator.
201 config REGULATOR_DA9210
202 tristate "Dialog Semiconductor DA9210 regulator"
206 Say y here to support for the Dialog Semiconductor DA9210.
207 The DA9210 is a multi-phase synchronous step down
208 converter 12A DC-DC Buck controlled through an I2C
211 config REGULATOR_DA9211
212 tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
216 Say y here to support for the Dialog Semiconductor DA9211/DA9212
217 /DA9213/DA9214/DA9215.
218 The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
219 step down converter 12A or 16A DC-DC Buck controlled through an I2C
222 config REGULATOR_DBX500_PRCMU
225 config REGULATOR_DB8500_PRCMU
226 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
227 depends on MFD_DB8500_PRCMU
228 select REGULATOR_DBX500_PRCMU
230 This driver supports the voltage domain regulators controlled by the
233 config REGULATOR_FAN53555
234 tristate "Fairchild FAN53555 Regulator"
238 This driver supports Fairchild FAN53555 Digitally Programmable
239 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
240 regulator that delivers a digitally programmable output from an
241 input voltage supply of 2.5V to 5.5V. The output voltage is
242 programmed through an I2C interface.
244 config REGULATOR_GPIO
245 tristate "GPIO regulator support"
246 depends on GPIOLIB || COMPILE_TEST
248 This driver provides support for regulators that can be
249 controlled via gpios.
250 It is capable of supporting current and voltage regulators
251 and the platform has to provide a mapping of GPIO-states
252 to target volts/amps.
254 config REGULATOR_HI6421
255 tristate "HiSilicon Hi6421 PMIC voltage regulator support"
256 depends on MFD_HI6421_PMIC && OF
258 This driver provides support for the voltage regulators on the
259 HiSilicon Hi6421 PMU / Codec IC.
260 Hi6421 is a multi-function device which, on regulator part, provides
261 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
262 of them come with support to either ECO (idle) or sleep mode.
264 config REGULATOR_ISL9305
265 tristate "Intersil ISL9305 regulator"
269 This driver supports ISL9305 voltage regulator chip.
271 config REGULATOR_ISL6271A
272 tristate "Intersil ISL6271A Power regulator"
275 This driver supports ISL6271A voltage regulator chip.
277 config REGULATOR_LP3971
278 tristate "National Semiconductors LP3971 PMIC regulator driver"
281 Say Y here to support the voltage regulators and convertors
282 on National Semiconductors LP3971 PMIC
284 config REGULATOR_LP3972
285 tristate "National Semiconductors LP3972 PMIC regulator driver"
288 Say Y here to support the voltage regulators and convertors
289 on National Semiconductors LP3972 PMIC
291 config REGULATOR_LP872X
292 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
296 This driver supports LP8720/LP8725 PMIC
298 config REGULATOR_LP8755
299 tristate "TI LP8755 High Performance PMU driver"
303 This driver supports LP8755 High Performance PMU driver. This
304 chip contains six step-down DC/DC converters which can support
305 9 mode multiphase configuration.
307 config REGULATOR_LP8788
308 tristate "TI LP8788 Power Regulators"
309 depends on MFD_LP8788
311 This driver supports LP8788 voltage regulator chip.
313 config REGULATOR_LTC3589
314 tristate "LTC3589 8-output voltage regulator"
318 This enables support for the LTC3589, LTC3589-1, and LTC3589-2
319 8-output regulators controlled via I2C.
321 config REGULATOR_MAX14577
322 tristate "Maxim 14577/77836 regulator"
323 depends on MFD_MAX14577
325 This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
326 The MAX14577 regulators include safeout LDO and charger current
327 regulator. The MAX77836 has two additional LDOs.
329 config REGULATOR_MAX1586
330 tristate "Maxim 1586/1587 voltage regulator"
333 This driver controls a Maxim 1586 or 1587 voltage output
334 regulator via I2C bus. The provided regulator is suitable
335 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
337 config REGULATOR_MAX8649
338 tristate "Maxim 8649 voltage regulator"
342 This driver controls a Maxim 8649 voltage output regulator via
345 config REGULATOR_MAX8660
346 tristate "Maxim 8660/8661 voltage regulator"
349 This driver controls a Maxim 8660/8661 voltage output
350 regulator via I2C bus.
352 config REGULATOR_MAX8907
353 tristate "Maxim 8907 voltage regulator"
354 depends on MFD_MAX8907
356 This driver controls a Maxim 8907 voltage output regulator
357 via I2C bus. The provided regulator is suitable for Tegra
358 chip to control Step-Down DC-DC and LDOs.
360 config REGULATOR_MAX8925
361 tristate "Maxim MAX8925 Power Management IC"
362 depends on MFD_MAX8925
364 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
366 config REGULATOR_MAX8952
367 tristate "Maxim MAX8952 Power Management IC"
370 This driver controls a Maxim 8952 voltage output regulator
371 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
372 modes ranging from 0.77V to 1.40V by 0.01V steps.
374 config REGULATOR_MAX8973
375 tristate "Maxim MAX8973 voltage regulator "
379 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
380 switching regulator delievers up to 9A of output current. Each
381 phase operates at a 2MHz fixed frequency with a 120 deg shift
382 from the adjacent phase, allowing the use of small magnetic component.
384 config REGULATOR_MAX8997
385 tristate "Maxim 8997/8966 regulator"
386 depends on MFD_MAX8997
388 This driver controls a Maxim 8997/8966 regulator
389 via I2C bus. The provided regulator is suitable for S5PC110,
390 S5PV210, and Exynos-4 chips to control VCC_CORE and
393 config REGULATOR_MAX8998
394 tristate "Maxim 8998 voltage regulator"
395 depends on MFD_MAX8998
397 This driver controls a Maxim 8998 voltage output regulator
398 via I2C bus. The provided regulator is suitable for S3C6410
399 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
401 config REGULATOR_MAX77686
402 tristate "Maxim 77686 regulator"
403 depends on MFD_MAX77686
405 This driver controls a Maxim 77686 regulator
406 via I2C bus. The provided regulator is suitable for
407 Exynos-4 chips to control VARM and VINT voltages.
409 config REGULATOR_MAX77693
410 tristate "Maxim 77693/77843 regulator"
411 depends on (MFD_MAX77693 || MFD_MAX77843)
413 This driver controls a Maxim 77693/77843 regulators via I2C bus.
414 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
415 and one current regulator 'CHARGER'. This is suitable for
416 Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
418 config REGULATOR_MAX77802
419 tristate "Maxim 77802 regulator"
420 depends on MFD_MAX77686
422 This driver controls a Maxim 77802 regulator
423 via I2C bus. The provided regulator is suitable for
424 Exynos5420/Exynos5800 SoCs to control various voltages.
425 It includes support for control of voltage and ramp speed.
427 config REGULATOR_MC13XXX_CORE
430 config REGULATOR_MC13783
431 tristate "Freescale MC13783 regulator driver"
432 depends on MFD_MC13XXX
433 select REGULATOR_MC13XXX_CORE
435 Say y here to support the regulators found on the Freescale MC13783
438 config REGULATOR_MC13892
439 tristate "Freescale MC13892 regulator driver"
440 depends on MFD_MC13XXX
441 select REGULATOR_MC13XXX_CORE
443 Say y here to support the regulators found on the Freescale MC13892
446 config REGULATOR_MT6311
447 tristate "MediaTek MT6311 PMIC"
450 Say y here to select this option to enable the power regulator of
451 MediaTek MT6311 PMIC.
452 This driver supports the control of different power rails of device
453 through regulator interface.
455 config REGULATOR_MT6397
456 tristate "MediaTek MT6397 PMIC"
457 depends on MFD_MT6397
459 Say y here to select this option to enable the power regulator of
460 MediaTek MT6397 PMIC.
461 This driver supports the control of different power rails of device
462 through regulator interface.
464 config REGULATOR_PALMAS
465 tristate "TI Palmas PMIC Regulators"
466 depends on MFD_PALMAS
468 If you wish to control the regulators on the Palmas series of
469 chips say Y here. This will enable support for all the software
470 controllable SMPS/LDO regulators.
472 The regulators available on Palmas series chips vary depending
473 on the muxing. This is handled automatically in the driver by
474 reading the mux info from OTP.
476 config REGULATOR_PBIAS
477 tristate "PBIAS OMAP regulator driver"
478 depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
480 Say y here to support pbias regulator for mmc1:SD card i/o
482 This driver provides support for OMAP pbias modelled
485 config REGULATOR_PCAP
486 tristate "Motorola PCAP2 regulator driver"
489 This driver provides support for the voltage regulators of the
492 config REGULATOR_PCF50633
493 tristate "NXP PCF50633 regulator driver"
494 depends on MFD_PCF50633
496 Say Y here to support the voltage regulators and convertors
499 config REGULATOR_PFUZE100
500 tristate "Freescale PFUZE100/PFUZE200 regulator driver"
504 Say y here to support the regulators found on the Freescale
505 PFUZE100/PFUZE200 PMIC.
508 tristate "PWM voltage regulator"
511 This driver supports PWM controlled voltage regulators. PWM
512 duty cycle can increase or decrease the voltage.
514 config REGULATOR_QCOM_RPM
515 tristate "Qualcomm RPM regulator driver"
516 depends on MFD_QCOM_RPM
518 If you say yes to this option, support will be included for the
519 regulators exposed by the Resource Power Manager found in Qualcomm
520 8660, 8960 and 8064 based devices.
522 Say M here if you want to include support for the regulators on the
523 Qualcomm RPM as a module. The module will be named
524 "qcom_rpm-regulator".
526 config REGULATOR_QCOM_SMD_RPM
527 tristate "Qualcomm SMD based RPM regulator driver"
528 depends on QCOM_SMD_RPM
530 If you say yes to this option, support will be included for the
531 regulators exposed by the Resource Power Manager found in Qualcomm
534 Say M here if you want to include support for the regulators on the
535 Qualcomm RPM as a module. The module will be named
536 "qcom_smd-regulator".
538 config REGULATOR_QCOM_SPMI
539 tristate "Qualcomm SPMI regulator driver"
540 depends on SPMI || COMPILE_TEST
542 If you say yes to this option, support will be included for the
543 regulators found in Qualcomm SPMI PMICs.
545 Say M here if you want to include support for the regulators on the
546 Qualcomm SPMI PMICs as a module. The module will be named
547 "qcom_spmi-regulator".
549 config REGULATOR_RC5T583
550 tristate "RICOH RC5T583 Power regulators"
551 depends on MFD_RC5T583
553 Select this option to enable the power regulator of RICOH
555 This driver supports the control of different power rails of device
556 through regulator interface. The device supports multiple DCDC/LDO
557 outputs which can be controlled by i2c communication.
559 config REGULATOR_RK808
560 tristate "Rockchip RK808 Power regulators"
563 Select this option to enable the power regulator of ROCKCHIP
565 This driver supports the control of different power rails of device
566 through regulator interface. The device supports multiple DCDC/LDO
567 outputs which can be controlled by i2c communication.
569 config REGULATOR_RN5T618
570 tristate "Ricoh RN5T618 voltage regulators"
571 depends on MFD_RN5T618
573 Say y here to support the regulators found on Ricoh RN5T618 PMIC.
575 config REGULATOR_RT5033
576 tristate "Richtek RT5033 Regulators"
577 depends on MFD_RT5033
579 This adds support for voltage and current regulators in Richtek
580 RT5033 PMIC. The device supports multiple regulators like
581 current source, LDO and Buck.
583 config REGULATOR_S2MPA01
584 tristate "Samsung S2MPA01 voltage regulator"
585 depends on MFD_SEC_CORE
587 This driver controls Samsung S2MPA01 voltage output regulator
588 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
590 config REGULATOR_S2MPS11
591 tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
592 depends on MFD_SEC_CORE
594 This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
595 output regulator via I2C bus. The chip is comprised of high efficient
596 Buck converters including Dual-Phase Buck converter, Buck-Boost
597 converter, various LDOs.
599 config REGULATOR_S5M8767
600 tristate "Samsung S5M8767A voltage regulator"
601 depends on MFD_SEC_CORE
603 This driver supports a Samsung S5M8767A voltage output regulator
604 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
605 supports DVS mode with 8bits of output voltage control.
607 config REGULATOR_SKY81452
608 tristate "Skyworks Solutions SKY81452 voltage regulator"
609 depends on MFD_SKY81452
611 This driver supports Skyworks SKY81452 voltage output regulator
612 via I2C bus. SKY81452 has one voltage linear regulator can be
613 programmed from 4.5V to 20V.
615 This driver can also be built as a module. If so, the module
616 will be called sky81452-regulator.
618 config REGULATOR_TI_ABB
619 tristate "TI Adaptive Body Bias on-chip LDO"
622 Select this option to support Texas Instruments' on-chip Adaptive Body
623 Bias (ABB) LDO regulators. It is recommended that this option be
624 enabled on required TI SoC. Certain Operating Performance Points
625 on TI SoCs may be unstable without enabling this as it provides
626 device specific optimized bias to allow/optimize functionality.
628 config REGULATOR_STW481X_VMMC
629 bool "ST Microelectronics STW481X VMMC regulator"
630 depends on MFD_STW481X
631 default y if MFD_STW481X
633 This driver supports the internal VMMC regulator in the STw481x
636 config REGULATOR_TPS51632
637 tristate "TI TPS51632 Power Regulator"
641 This driver supports TPS51632 voltage regulator chip.
642 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
643 with Serial VID control and DVFS.
644 The voltage output can be configure through I2C interface or PWM
647 config REGULATOR_TPS6105X
648 tristate "TI TPS6105X Power regulators"
650 default y if TPS6105X
652 This driver supports TPS61050/TPS61052 voltage regulator chips.
653 It is a single boost converter primarily for white LEDs and
656 config REGULATOR_TPS62360
657 tristate "TI TPS6236x Power Regulator"
661 This driver supports TPS6236x voltage regulator chip. This
662 regulator is meant for processor core supply. This chip is
663 high-frequency synchronous step down dc-dc converter optimized
664 for battery-powered portable applications.
666 config REGULATOR_TPS65023
667 tristate "TI TPS65023 Power regulators"
671 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
672 three step-down converters and two general-purpose LDO voltage regulators.
673 It supports TI's software based Class-2 SmartReflex implementation.
675 config REGULATOR_TPS6507X
676 tristate "TI TPS6507X Power regulators"
679 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
680 three step-down converters and two general-purpose LDO voltage regulators.
681 It supports TI's software based Class-2 SmartReflex implementation.
683 config REGULATOR_TPS65090
684 tristate "TI TPS65090 Power regulator"
685 depends on MFD_TPS65090
687 This driver provides support for the voltage regulators on the
690 config REGULATOR_TPS65217
691 tristate "TI TPS65217 Power regulators"
692 depends on MFD_TPS65217
694 This driver supports TPS65217 voltage regulator chips. TPS65217
695 provides three step-down converters and four general-purpose LDO
696 voltage regulators. It supports software based voltage control
697 for different voltage domains
699 config REGULATOR_TPS65218
700 tristate "TI TPS65218 Power regulators"
701 depends on MFD_TPS65218 && OF
703 This driver supports TPS65218 voltage regulator chips. TPS65218
704 provides six step-down converters and one general-purpose LDO
705 voltage regulators. It supports software based voltage control
706 for different voltage domains
708 config REGULATOR_TPS6524X
709 tristate "TI TPS6524X Power regulators"
712 This driver supports TPS6524X voltage regulator chips. TPS6524X
713 provides three step-down converters and two general-purpose LDO
714 voltage regulators. This device is interfaced using a customized
715 serial interface currently supported on the sequencer serial
718 config REGULATOR_TPS6586X
719 tristate "TI TPS6586X Power regulators"
720 depends on MFD_TPS6586X
722 This driver supports TPS6586X voltage regulator chips.
724 config REGULATOR_TPS65910
725 tristate "TI TPS65910/TPS65911 Power Regulators"
726 depends on MFD_TPS65910
728 This driver supports TPS65910/TPS65911 voltage regulator chips.
730 config REGULATOR_TPS65912
731 tristate "TI TPS65912 Power regulator"
732 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
734 This driver supports TPS65912 voltage regulator chip.
736 config REGULATOR_TPS80031
737 tristate "TI TPS80031/TPS80032 power regualtor driver"
738 depends on MFD_TPS80031
740 TPS80031/ TPS80032 Fully Integrated Power Management with Power
741 Path and Battery Charger. It has 5 configurable step-down
742 converters, 11 general purpose LDOs, VBUS generator and digital
743 output to control regulators.
745 config REGULATOR_TWL4030
746 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
747 depends on TWL4030_CORE
749 This driver supports the voltage regulators provided by
750 this family of companion chips.
752 config REGULATOR_VEXPRESS
753 tristate "Versatile Express regulators"
754 depends on VEXPRESS_CONFIG
756 This driver provides support for voltage regulators available
757 on the ARM Ltd's Versatile Express platform.
759 config REGULATOR_WM831X
760 tristate "Wolfson Microelectronics WM831x PMIC regulators"
761 depends on MFD_WM831X
763 Support the voltage and current regulators of the WM831x series
766 config REGULATOR_WM8350
767 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
768 depends on MFD_WM8350
770 This driver provides support for the voltage and current regulators
771 of the WM8350 AudioPlus PMIC.
773 config REGULATOR_WM8400
774 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
775 depends on MFD_WM8400
777 This driver provides support for the voltage regulators of the
778 WM8400 AudioPlus PMIC.
780 config REGULATOR_WM8994
781 tristate "Wolfson Microelectronics WM8994 CODEC"
782 depends on MFD_WM8994
784 This driver provides support for the voltage regulators on the