drivers/scsi/isci/host.c

   1 /*
   2  * This file is provided under a dual BSD/GPLv2 license.  When using or
   3  * redistributing this file, you may do so under either license.
   4  *
   5  * GPL LICENSE SUMMARY
   6  *
   7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of version 2 of the GNU General Public License as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called LICENSE.GPL.
  23  *
  24  * BSD LICENSE
  25  *
  26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  27  * All rights reserved.
  28  *
  29  * Redistribution and use in source and binary forms, with or without
  30  * modification, are permitted provided that the following conditions
  31  * are met:
  32  *
  33  *   * Redistributions of source code must retain the above copyright
  34  *     notice, this list of conditions and the following disclaimer.
  35  *   * Redistributions in binary form must reproduce the above copyright
  36  *     notice, this list of conditions and the following disclaimer in
  37  *     the documentation and/or other materials provided with the
  38  *     distribution.
  39  *   * Neither the name of Intel Corporation nor the names of its
  40  *     contributors may be used to endorse or promote products derived
  41  *     from this software without specific prior written permission.
  42  *
  43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  54  */
  55 #include <linux/device.h>
  56 #include <scsi/sas.h>
  57 #include "host.h"
  58 #include "isci.h"
  59 #include "port.h"
  60 #include "host.h"
  61 #include "probe_roms.h"
  62 #include "remote_device.h"
  63 #include "request.h"
  64 #include "scic_io_request.h"
  65 #include "scic_sds_port_configuration_agent.h"
  66 #include "sci_util.h"
  67 #include "scu_completion_codes.h"
  68 #include "scu_event_codes.h"
  69 #include "registers.h"
  70 #include "scu_remote_node_context.h"
  71 #include "scu_task_context.h"
  72 #include "scu_unsolicited_frame.h"
  73 #include "timers.h"
  74
  75 #define SCU_CONTEXT_RAM_INIT_STALL_TIME      200
  76
  77 /**
  78  * smu_dcc_get_max_ports() -
  79  *
  80  * This macro returns the maximum number of logical ports supported by the
  81  * hardware. The caller passes in the value read from the device context
  82  * capacity register and this macro will mash and shift the value appropriately.
  83  */
  84 #define smu_dcc_get_max_ports(dcc_value) \
  85         (\
  86                 (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
  87                  >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \
  88         )
  89
  90 /**
  91  * smu_dcc_get_max_task_context() -
  92  *
  93  * This macro returns the maximum number of task contexts supported by the
  94  * hardware. The caller passes in the value read from the device context
  95  * capacity register and this macro will mash and shift the value appropriately.
  96  */
  97 #define smu_dcc_get_max_task_context(dcc_value) \
  98         (\
  99                 (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
 100                  >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \
 101         )
 102
 103 /**
 104  * smu_dcc_get_max_remote_node_context() -
 105  *
 106  * This macro returns the maximum number of remote node contexts supported by
 107  * the hardware. The caller passes in the value read from the device context
 108  * capacity register and this macro will mash and shift the value appropriately.
 109  */
 110 #define smu_dcc_get_max_remote_node_context(dcc_value) \
 111         (\
 112                 (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
 113                  >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \
 114         )
 115
 116
 117 #define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT  3
 118 #define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT  3
 119
 120 /**
 121  *
 122  *
 123  * The number of milliseconds to wait for a phy to start.
 124  */
 125 #define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT      100
 126
 127 /**
 128  *
 129  *
 130  * The number of milliseconds to wait while a given phy is consuming power
 131  * before allowing another set of phys to consume power. Ultimately, this will
 132  * be specified by OEM parameter.
 133  */
 134 #define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500
 135
 136 /**
 137  * NORMALIZE_PUT_POINTER() -
 138  *
 139  * This macro will normalize the completion queue put pointer so its value can
 140  * be used as an array inde
 141  */
 142 #define NORMALIZE_PUT_POINTER(x) \
 143         ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK)
 144
 145
 146 /**
 147  * NORMALIZE_EVENT_POINTER() -
 148  *
 149  * This macro will normalize the completion queue event entry so its value can
 150  * be used as an index.
 151  */
 152 #define NORMALIZE_EVENT_POINTER(x) \
 153         (\
 154                 ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \
 155                 >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \
 156         )
 157
 158 /**
 159  * INCREMENT_COMPLETION_QUEUE_GET() -
 160  *
 161  * This macro will increment the controllers completion queue index value and
 162  * possibly toggle the cycle bit if the completion queue index wraps back to 0.
 163  */
 164 #define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \
 165         INCREMENT_QUEUE_GET(\
 166                 (index), \
 167                 (cycle), \
 168                 (controller)->completion_queue_entries, \
 169                 SMU_CQGR_CYCLE_BIT \
 170                 )
 171
 172 /**
 173  * INCREMENT_EVENT_QUEUE_GET() -
 174  *
 175  * This macro will increment the controllers event queue index value and
 176  * possibly toggle the event cycle bit if the event queue index wraps back to 0.
 177  */
 178 #define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \
 179         INCREMENT_QUEUE_GET(\
 180                 (index), \
 181                 (cycle), \
 182                 (controller)->completion_event_entries, \
 183                 SMU_CQGR_EVENT_CYCLE_BIT \
 184                 )
 185
 186
 187 /**
 188  * NORMALIZE_GET_POINTER() -
 189  *
 190  * This macro will normalize the completion queue get pointer so its value can
 191  * be used as an index into an array
 192  */
 193 #define NORMALIZE_GET_POINTER(x) \
 194         ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK)
 195
 196 /**
 197  * NORMALIZE_GET_POINTER_CYCLE_BIT() -
 198  *
 199  * This macro will normalize the completion queue cycle pointer so it matches
 200  * the completion queue cycle bit
 201  */
 202 #define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \
 203         ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT))
 204
 205 /**
 206  * COMPLETION_QUEUE_CYCLE_BIT() -
 207  *
 208  * This macro will return the cycle bit of the completion queue entry
 209  */
 210 #define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000)
 211
 212 static bool scic_sds_controller_completion_queue_has_entries(
 213         struct scic_sds_controller *scic)
 214 {
 215         u32 get_value = scic->completion_queue_get;
 216         u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK;
 217
 218         if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) ==
 219             COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]))
 220                 return true;
 221
 222         return false;
 223 }
 224
 225 static bool scic_sds_controller_isr(struct scic_sds_controller *scic)
 226 {
 227         if (scic_sds_controller_completion_queue_has_entries(scic)) {
 228                 return true;
 229         } else {
 230                 /*
 231                  * we have a spurious interrupt it could be that we have already
 232                  * emptied the completion queue from a previous interrupt */
 233                 writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
 234
 235                 /*
 236                  * There is a race in the hardware that could cause us not to be notified
 237                  * of an interrupt completion if we do not take this step.  We will mask
 238                  * then unmask the interrupts so if there is another interrupt pending
 239                  * the clearing of the interrupt source we get the next interrupt message. */
 240                 writel(0xFF000000, &scic->smu_registers->interrupt_mask);
 241                 writel(0, &scic->smu_registers->interrupt_mask);
 242         }
 243
 244         return false;
 245 }
 246
 247 irqreturn_t isci_msix_isr(int vec, void *data)
 248 {
 249         struct isci_host *ihost = data;
 250
 251         if (scic_sds_controller_isr(&ihost->sci))
 252                 tasklet_schedule(&ihost->completion_tasklet);
 253
 254         return IRQ_HANDLED;
 255 }
 256
 257 static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic)
 258 {
 259         u32 interrupt_status;
 260
 261         interrupt_status =
 262                 readl(&scic->smu_registers->interrupt_status);
 263         interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND);
 264
 265         if (interrupt_status != 0) {
 266                 /*
 267                  * There is an error interrupt pending so let it through and handle
 268                  * in the callback */
 269                 return true;
 270         }
 271
 272         /*
 273          * There is a race in the hardware that could cause us not to be notified
 274          * of an interrupt completion if we do not take this step.  We will mask
 275          * then unmask the error interrupts so if there was another interrupt
 276          * pending we will be notified.
 277          * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */
 278         writel(0xff, &scic->smu_registers->interrupt_mask);
 279         writel(0, &scic->smu_registers->interrupt_mask);
 280
 281         return false;
 282 }
 283
 284 static void scic_sds_controller_task_completion(struct scic_sds_controller *scic,
 285                                                 u32 completion_entry)
 286 {
 287         u32 index;
 288         struct scic_sds_request *io_request;
 289
 290         index = SCU_GET_COMPLETION_INDEX(completion_entry);
 291         io_request = scic->io_request_table[index];
 292
 293         /* Make sure that we really want to process this IO request */
 294         if (
 295                 (io_request != NULL)
 296                 && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG)
 297                 && (
 298                         scic_sds_io_tag_get_sequence(io_request->io_tag)
 299                         == scic->io_request_sequence[index]
 300                         )
 301                 ) {
 302                 /* Yep this is a valid io request pass it along to the io request handler */
 303                 scic_sds_io_request_tc_completion(io_request, completion_entry);
 304         }
 305 }
 306
 307 static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic,
 308                                                 u32 completion_entry)
 309 {
 310         u32 index;
 311         struct scic_sds_request *io_request;
 312         struct scic_sds_remote_device *device;
 313
 314         index = SCU_GET_COMPLETION_INDEX(completion_entry);
 315
 316         switch (scu_get_command_request_type(completion_entry)) {
 317         case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC:
 318         case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC:
 319                 io_request = scic->io_request_table[index];
 320                 dev_warn(scic_to_dev(scic),
 321                          "%s: SCIC SDS Completion type SDMA %x for io request "
 322                          "%p\n",
 323                          __func__,
 324                          completion_entry,
 325                          io_request);
 326                 /* @todo For a post TC operation we need to fail the IO
 327                  * request
 328                  */
 329                 break;
 330
 331         case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC:
 332         case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC:
 333         case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC:
 334                 device = scic->device_table[index];
 335                 dev_warn(scic_to_dev(scic),
 336                          "%s: SCIC SDS Completion type SDMA %x for remote "
 337                          "device %p\n",
 338                          __func__,
 339                          completion_entry,
 340                          device);
 341                 /* @todo For a port RNC operation we need to fail the
 342                  * device
 343                  */
 344                 break;
 345
 346         default:
 347                 dev_warn(scic_to_dev(scic),
 348                          "%s: SCIC SDS Completion unknown SDMA completion "
 349                          "type %x\n",
 350                          __func__,
 351                          completion_entry);
 352                 break;
 353
 354         }
 355 }
 356
 357 static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic,
 358                                                   u32 completion_entry)
 359 {
 360         u32 index;
 361         u32 frame_index;
 362
 363         struct isci_host *ihost = scic_to_ihost(scic);
 364         struct scu_unsolicited_frame_header *frame_header;
 365         struct scic_sds_phy *phy;
 366         struct scic_sds_remote_device *device;
 367
 368         enum sci_status result = SCI_FAILURE;
 369
 370         frame_index = SCU_GET_FRAME_INDEX(completion_entry);
 371
 372         frame_header = scic->uf_control.buffers.array[frame_index].header;
 373         scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE;
 374
 375         if (SCU_GET_FRAME_ERROR(completion_entry)) {
 376                 /*
 377                  * / @todo If the IAF frame or SIGNATURE FIS frame has an error will
 378                  * /       this cause a problem? We expect the phy initialization will
 379                  * /       fail if there is an error in the frame. */
 380                 scic_sds_controller_release_frame(scic, frame_index);
 381                 return;
 382         }
 383
 384         if (frame_header->is_address_frame) {
 385                 index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
 386                 phy = &ihost->phys[index].sci;
 387                 result = scic_sds_phy_frame_handler(phy, frame_index);
 388         } else {
 389
 390                 index = SCU_GET_COMPLETION_INDEX(completion_entry);
 391
 392                 if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
 393                         /*
 394                          * This is a signature fis or a frame from a direct attached SATA
 395                          * device that has not yet been created.  In either case forwared
 396                          * the frame to the PE and let it take care of the frame data. */
 397                         index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
 398                         phy = &ihost->phys[index].sci;
 399                         result = scic_sds_phy_frame_handler(phy, frame_index);
 400                 } else {
 401                         if (index < scic->remote_node_entries)
 402                                 device = scic->device_table[index];
 403                         else
 404                                 device = NULL;
 405
 406                         if (device != NULL)
 407                                 result = scic_sds_remote_device_frame_handler(device, frame_index);
 408                         else
 409                                 scic_sds_controller_release_frame(scic, frame_index);
 410                 }
 411         }
 412
 413         if (result != SCI_SUCCESS) {
 414                 /*
 415                  * / @todo Is there any reason to report some additional error message
 416                  * /       when we get this failure notifiction? */
 417         }
 418 }
 419
 420 static void scic_sds_controller_event_completion(struct scic_sds_controller *scic,
 421                                                  u32 completion_entry)
 422 {
 423         struct isci_host *ihost = scic_to_ihost(scic);
 424         struct scic_sds_request *io_request;
 425         struct scic_sds_remote_device *device;
 426         struct scic_sds_phy *phy;
 427         u32 index;
 428
 429         index = SCU_GET_COMPLETION_INDEX(completion_entry);
 430
 431         switch (scu_get_event_type(completion_entry)) {
 432         case SCU_EVENT_TYPE_SMU_COMMAND_ERROR:
 433                 /* / @todo The driver did something wrong and we need to fix the condtion. */
 434                 dev_err(scic_to_dev(scic),
 435                         "%s: SCIC Controller 0x%p received SMU command error "
 436                         "0x%x\n",
 437                         __func__,
 438                         scic,
 439                         completion_entry);
 440                 break;
 441
 442         case SCU_EVENT_TYPE_SMU_PCQ_ERROR:
 443         case SCU_EVENT_TYPE_SMU_ERROR:
 444         case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR:
 445                 /*
 446                  * / @todo This is a hardware failure and its likely that we want to
 447                  * /       reset the controller. */
 448                 dev_err(scic_to_dev(scic),
 449                         "%s: SCIC Controller 0x%p received fatal controller "
 450                         "event  0x%x\n",
 451                         __func__,
 452                         scic,
 453                         completion_entry);
 454                 break;
 455
 456         case SCU_EVENT_TYPE_TRANSPORT_ERROR:
 457                 io_request = scic->io_request_table[index];
 458                 scic_sds_io_request_event_handler(io_request, completion_entry);
 459                 break;
 460
 461         case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
 462                 switch (scu_get_event_specifier(completion_entry)) {
 463                 case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE:
 464                 case SCU_EVENT_SPECIFIC_TASK_TIMEOUT:
 465                         io_request = scic->io_request_table[index];
 466                         if (io_request != NULL)
 467                                 scic_sds_io_request_event_handler(io_request, completion_entry);
 468                         else
 469                                 dev_warn(scic_to_dev(scic),
 470                                          "%s: SCIC Controller 0x%p received "
 471                                          "event 0x%x for io request object "
 472                                          "that doesnt exist.\n",
 473                                          __func__,
 474                                          scic,
 475                                          completion_entry);
 476
 477                         break;
 478
 479                 case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT:
 480                         device = scic->device_table[index];
 481                         if (device != NULL)
 482                                 scic_sds_remote_device_event_handler(device, completion_entry);
 483                         else
 484                                 dev_warn(scic_to_dev(scic),
 485                                          "%s: SCIC Controller 0x%p received "
 486                                          "event 0x%x for remote device object "
 487                                          "that doesnt exist.\n",
 488                                          __func__,
 489                                          scic,
 490                                          completion_entry);
 491
 492                         break;
 493                 }
 494                 break;
 495
 496         case SCU_EVENT_TYPE_BROADCAST_CHANGE:
 497         /*
 498          * direct the broadcast change event to the phy first and then let
 499          * the phy redirect the broadcast change to the port object */
 500         case SCU_EVENT_TYPE_ERR_CNT_EVENT:
 501         /*
 502          * direct error counter event to the phy object since that is where
 503          * we get the event notification.  This is a type 4 event. */
 504         case SCU_EVENT_TYPE_OSSP_EVENT:
 505                 index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
 506                 phy = &ihost->phys[index].sci;
 507                 scic_sds_phy_event_handler(phy, completion_entry);
 508                 break;
 509
 510         case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
 511         case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
 512         case SCU_EVENT_TYPE_RNC_OPS_MISC:
 513                 if (index < scic->remote_node_entries) {
 514                         device = scic->device_table[index];
 515
 516                         if (device != NULL)
 517                                 scic_sds_remote_device_event_handler(device, completion_entry);
 518                 } else
 519                         dev_err(scic_to_dev(scic),
 520                                 "%s: SCIC Controller 0x%p received event 0x%x "
 521                                 "for remote device object 0x%0x that doesnt "
 522                                 "exist.\n",
 523                                 __func__,
 524                                 scic,
 525                                 completion_entry,
 526                                 index);
 527
 528                 break;
 529
 530         default:
 531                 dev_warn(scic_to_dev(scic),
 532                          "%s: SCIC Controller received unknown event code %x\n",
 533                          __func__,
 534                          completion_entry);
 535                 break;
 536         }
 537 }
 538
 539
 540
 541 static void scic_sds_controller_process_completions(struct scic_sds_controller *scic)
 542 {
 543         u32 completion_count = 0;
 544         u32 completion_entry;
 545         u32 get_index;
 546         u32 get_cycle;
 547         u32 event_index;
 548         u32 event_cycle;
 549
 550         dev_dbg(scic_to_dev(scic),
 551                 "%s: completion queue begining get:0x%08x\n",
 552                 __func__,
 553                 scic->completion_queue_get);
 554
 555         /* Get the component parts of the completion queue */
 556         get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get);
 557         get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get;
 558
 559         event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get);
 560         event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get;
 561
 562         while (
 563                 NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle)
 564                 == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])
 565                 ) {
 566                 completion_count++;
 567
 568                 completion_entry = scic->completion_queue[get_index];
 569                 INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle);
 570
 571                 dev_dbg(scic_to_dev(scic),
 572                         "%s: completion queue entry:0x%08x\n",
 573                         __func__,
 574                         completion_entry);
 575
 576                 switch (SCU_GET_COMPLETION_TYPE(completion_entry)) {
 577                 case SCU_COMPLETION_TYPE_TASK:
 578                         scic_sds_controller_task_completion(scic, completion_entry);
 579                         break;
 580
 581                 case SCU_COMPLETION_TYPE_SDMA:
 582                         scic_sds_controller_sdma_completion(scic, completion_entry);
 583                         break;
 584
 585                 case SCU_COMPLETION_TYPE_UFI:
 586                         scic_sds_controller_unsolicited_frame(scic, completion_entry);
 587                         break;
 588
 589                 case SCU_COMPLETION_TYPE_EVENT:
 590                         INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle);
 591                         scic_sds_controller_event_completion(scic, completion_entry);
 592                         break;
 593
 594                 case SCU_COMPLETION_TYPE_NOTIFY:
 595                         /*
 596                          * Presently we do the same thing with a notify event that we do with the
 597                          * other event codes. */
 598                         INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle);
 599                         scic_sds_controller_event_completion(scic, completion_entry);
 600                         break;
 601
 602                 default:
 603                         dev_warn(scic_to_dev(scic),
 604                                  "%s: SCIC Controller received unknown "
 605                                  "completion type %x\n",
 606                                  __func__,
 607                                  completion_entry);
 608                         break;
 609                 }
 610         }
 611
 612         /* Update the get register if we completed one or more entries */
 613         if (completion_count > 0) {
 614                 scic->completion_queue_get =
 615                         SMU_CQGR_GEN_BIT(ENABLE) |
 616                         SMU_CQGR_GEN_BIT(EVENT_ENABLE) |
 617                         event_cycle |
 618                         SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) |
 619                         get_cycle |
 620                         SMU_CQGR_GEN_VAL(POINTER, get_index);
 621
 622                 writel(scic->completion_queue_get,
 623                        &scic->smu_registers->completion_queue_get);
 624
 625         }
 626
 627         dev_dbg(scic_to_dev(scic),
 628                 "%s: completion queue ending get:0x%08x\n",
 629                 __func__,
 630                 scic->completion_queue_get);
 631
 632 }
 633
 634 static void scic_sds_controller_error_handler(struct scic_sds_controller *scic)
 635 {
 636         u32 interrupt_status;
 637
 638         interrupt_status =
 639                 readl(&scic->smu_registers->interrupt_status);
 640
 641         if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) &&
 642             scic_sds_controller_completion_queue_has_entries(scic)) {
 643
 644                 scic_sds_controller_process_completions(scic);
 645                 writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status);
 646         } else {
 647                 dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__,
 648                         interrupt_status);
 649
 650                 sci_base_state_machine_change_state(&scic->state_machine,
 651                                                     SCI_BASE_CONTROLLER_STATE_FAILED);
 652
 653                 return;
 654         }
 655
 656         /* If we dont process any completions I am not sure that we want to do this.
 657          * We are in the middle of a hardware fault and should probably be reset.
 658          */
 659         writel(0, &scic->smu_registers->interrupt_mask);
 660 }
 661
 662 irqreturn_t isci_intx_isr(int vec, void *data)
 663 {
 664         irqreturn_t ret = IRQ_NONE;
 665         struct isci_host *ihost = data;
 666         struct scic_sds_controller *scic = &ihost->sci;
 667
 668         if (scic_sds_controller_isr(scic)) {
 669                 writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
 670                 tasklet_schedule(&ihost->completion_tasklet);
 671                 ret = IRQ_HANDLED;
 672         } else if (scic_sds_controller_error_isr(scic)) {
 673                 spin_lock(&ihost->scic_lock);
 674                 scic_sds_controller_error_handler(scic);
 675                 spin_unlock(&ihost->scic_lock);
 676                 ret = IRQ_HANDLED;
 677         }
 678
 679         return ret;
 680 }
 681
 682 irqreturn_t isci_error_isr(int vec, void *data)
 683 {
 684         struct isci_host *ihost = data;
 685
 686         if (scic_sds_controller_error_isr(&ihost->sci))
 687                 scic_sds_controller_error_handler(&ihost->sci);
 688
 689         return IRQ_HANDLED;
 690 }
 691
 692 /**
 693  * isci_host_start_complete() - This function is called by the core library,
 694  *    through the ISCI Module, to indicate controller start status.
 695  * @isci_host: This parameter specifies the ISCI host object
 696  * @completion_status: This parameter specifies the completion status from the
 697  *    core library.
 698  *
 699  */
 700 static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status)
 701 {
 702         if (completion_status != SCI_SUCCESS)
 703                 dev_info(&ihost->pdev->dev,
 704                         "controller start timed out, continuing...\n");
 705         isci_host_change_state(ihost, isci_ready);
 706         clear_bit(IHOST_START_PENDING, &ihost->flags);
 707         wake_up(&ihost->eventq);
 708 }
 709
 710 int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time)
 711 {
 712         struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha;
 713
 714         if (test_bit(IHOST_START_PENDING, &ihost->flags))
 715                 return 0;
 716
 717         /* todo: use sas_flush_discovery once it is upstream */
 718         scsi_flush_work(shost);
 719
 720         scsi_flush_work(shost);
 721
 722         dev_dbg(&ihost->pdev->dev,
 723                 "%s: ihost->status = %d, time = %ld\n",
 724                  __func__, isci_host_get_state(ihost), time);
 725
 726         return 1;
 727
 728 }
 729
 730 /**
 731  * scic_controller_get_suggested_start_timeout() - This method returns the
 732  *    suggested scic_controller_start() timeout amount.  The user is free to
 733  *    use any timeout value, but this method provides the suggested minimum
 734  *    start timeout value.  The returned value is based upon empirical
 735  *    information determined as a result of interoperability testing.
 736  * @controller: the handle to the controller object for which to return the
 737  *    suggested start timeout.
 738  *
 739  * This method returns the number of milliseconds for the suggested start
 740  * operation timeout.
 741  */
 742 static u32 scic_controller_get_suggested_start_timeout(
 743         struct scic_sds_controller *sc)
 744 {
 745         /* Validate the user supplied parameters. */
 746         if (sc == NULL)
 747                 return 0;
 748
 749         /*
 750          * The suggested minimum timeout value for a controller start operation:
 751          *
 752          *     Signature FIS Timeout
 753          *   + Phy Start Timeout
 754          *   + Number of Phy Spin Up Intervals
 755          *   ---------------------------------
 756          *   Number of milliseconds for the controller start operation.
 757          *
 758          * NOTE: The number of phy spin up intervals will be equivalent
 759          *       to the number of phys divided by the number phys allowed
 760          *       per interval - 1 (once OEM parameters are supported).
 761          *       Currently we assume only 1 phy per interval. */
 762
 763         return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
 764                 + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
 765                 + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
 766 }
 767
 768 static void scic_controller_enable_interrupts(
 769         struct scic_sds_controller *scic)
 770 {
 771         BUG_ON(scic->smu_registers == NULL);
 772         writel(0, &scic->smu_registers->interrupt_mask);
 773 }
 774
 775 void scic_controller_disable_interrupts(
 776         struct scic_sds_controller *scic)
 777 {
 778         BUG_ON(scic->smu_registers == NULL);
 779         writel(0xffffffff, &scic->smu_registers->interrupt_mask);
 780 }
 781
 782 static void scic_sds_controller_enable_port_task_scheduler(
 783         struct scic_sds_controller *scic)
 784 {
 785         u32 port_task_scheduler_value;
 786
 787         port_task_scheduler_value =
 788                 readl(&scic->scu_registers->peg0.ptsg.control);
 789         port_task_scheduler_value |=
 790                 (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) |
 791                  SCU_PTSGCR_GEN_BIT(PTSG_ENABLE));
 792         writel(port_task_scheduler_value,
 793                &scic->scu_registers->peg0.ptsg.control);
 794 }
 795
 796 static void scic_sds_controller_assign_task_entries(struct scic_sds_controller *scic)
 797 {
 798         u32 task_assignment;
 799
 800         /*
 801          * Assign all the TCs to function 0
 802          * TODO: Do we actually need to read this register to write it back?
 803          */
 804
 805         task_assignment =
 806                 readl(&scic->smu_registers->task_context_assignment[0]);
 807
 808         task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) |
 809                 (SMU_TCA_GEN_VAL(ENDING,  scic->task_context_entries - 1)) |
 810                 (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE));
 811
 812         writel(task_assignment,
 813                 &scic->smu_registers->task_context_assignment[0]);
 814
 815 }
 816
 817 static void scic_sds_controller_initialize_completion_queue(struct scic_sds_controller *scic)
 818 {
 819         u32 index;
 820         u32 completion_queue_control_value;
 821         u32 completion_queue_get_value;
 822         u32 completion_queue_put_value;
 823
 824         scic->completion_queue_get = 0;
 825
 826         completion_queue_control_value = (
 827                 SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1)
 828                 | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1)
 829                 );
 830
 831         writel(completion_queue_control_value,
 832                &scic->smu_registers->completion_queue_control);
 833
 834
 835         /* Set the completion queue get pointer and enable the queue */
 836         completion_queue_get_value = (
 837                 (SMU_CQGR_GEN_VAL(POINTER, 0))
 838                 | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0))
 839                 | (SMU_CQGR_GEN_BIT(ENABLE))
 840                 | (SMU_CQGR_GEN_BIT(EVENT_ENABLE))
 841                 );
 842
 843         writel(completion_queue_get_value,
 844                &scic->smu_registers->completion_queue_get);
 845
 846         /* Set the completion queue put pointer */
 847         completion_queue_put_value = (
 848                 (SMU_CQPR_GEN_VAL(POINTER, 0))
 849                 | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0))
 850                 );
 851
 852         writel(completion_queue_put_value,
 853                &scic->smu_registers->completion_queue_put);
 854
 855         /* Initialize the cycle bit of the completion queue entries */
 856         for (index = 0; index < scic->completion_queue_entries; index++) {
 857                 /*
 858                  * If get.cycle_bit != completion_queue.cycle_bit
 859                  * its not a valid completion queue entry
 860                  * so at system start all entries are invalid */
 861                 scic->completion_queue[index] = 0x80000000;
 862         }
 863 }
 864
 865 static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_sds_controller *scic)
 866 {
 867         u32 frame_queue_control_value;
 868         u32 frame_queue_get_value;
 869         u32 frame_queue_put_value;
 870
 871         /* Write the queue size */
 872         frame_queue_control_value =
 873                 SCU_UFQC_GEN_VAL(QUEUE_SIZE,
 874                                  scic->uf_control.address_table.count);
 875
 876         writel(frame_queue_control_value,
 877                &scic->scu_registers->sdma.unsolicited_frame_queue_control);
 878
 879         /* Setup the get pointer for the unsolicited frame queue */
 880         frame_queue_get_value = (
 881                 SCU_UFQGP_GEN_VAL(POINTER, 0)
 882                 |  SCU_UFQGP_GEN_BIT(ENABLE_BIT)
 883                 );
 884
 885         writel(frame_queue_get_value,
 886                &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
 887         /* Setup the put pointer for the unsolicited frame queue */
 888         frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0);
 889         writel(frame_queue_put_value,
 890                &scic->scu_registers->sdma.unsolicited_frame_put_pointer);
 891 }
 892
 893 /**
 894  * This method will attempt to transition into the ready state for the
 895  *    controller and indicate that the controller start operation has completed
 896  *    if all criteria are met.
 897  * @scic: This parameter indicates the controller object for which
 898  *    to transition to ready.
 899  * @status: This parameter indicates the status value to be pass into the call
 900  *    to scic_cb_controller_start_complete().
 901  *
 902  * none.
 903  */
 904 static void scic_sds_controller_transition_to_ready(
 905         struct scic_sds_controller *scic,
 906         enum sci_status status)
 907 {
 908         struct isci_host *ihost = scic_to_ihost(scic);
 909
 910         if (scic->state_machine.current_state_id ==
 911             SCI_BASE_CONTROLLER_STATE_STARTING) {
 912                 /*
 913                  * We move into the ready state, because some of the phys/ports
 914                  * may be up and operational.
 915                  */
 916                 sci_base_state_machine_change_state(&scic->state_machine,
 917                                                     SCI_BASE_CONTROLLER_STATE_READY);
 918
 919                 isci_host_start_complete(ihost, status);
 920         }
 921 }
 922
 923 static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic)
 924 {
 925         isci_timer_stop(scic->phy_startup_timer);
 926
 927         scic->phy_startup_timer_pending = false;
 928 }
 929
 930 static void scic_sds_controller_phy_timer_start(struct scic_sds_controller *scic)
 931 {
 932         isci_timer_start(scic->phy_startup_timer,
 933                          SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT);
 934
 935         scic->phy_startup_timer_pending = true;
 936 }
 937
 938 /**
 939  * scic_sds_controller_start_next_phy - start phy
 940  * @scic: controller
 941  *
 942  * If all the phys have been started, then attempt to transition the
 943  * controller to the READY state and inform the user
 944  * (scic_cb_controller_start_complete()).
 945  */
 946 static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic)
 947 {
 948         struct isci_host *ihost = scic_to_ihost(scic);
 949         struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
 950         struct scic_sds_phy *sci_phy;
 951         enum sci_status status;
 952
 953         status = SCI_SUCCESS;
 954
 955         if (scic->phy_startup_timer_pending)
 956                 return status;
 957
 958         if (scic->next_phy_to_start >= SCI_MAX_PHYS) {
 959                 bool is_controller_start_complete = true;
 960                 u32 state;
 961                 u8 index;
 962
 963                 for (index = 0; index < SCI_MAX_PHYS; index++) {
 964                         sci_phy = &ihost->phys[index].sci;
 965                         state = sci_phy->state_machine.current_state_id;
 966
 967                         if (!scic_sds_phy_get_port(sci_phy))
 968                                 continue;
 969
 970                         /* The controller start operation is complete iff:
 971                          * - all links have been given an opportunity to start
 972                          * - have no indication of a connected device
 973                          * - have an indication of a connected device and it has
 974                          *   finished the link training process.
 975                          */
 976                         if ((sci_phy->is_in_link_training == false &&
 977                              state == SCI_BASE_PHY_STATE_INITIAL) ||
 978                             (sci_phy->is_in_link_training == false &&
 979                              state == SCI_BASE_PHY_STATE_STOPPED) ||
 980                             (sci_phy->is_in_link_training == true &&
 981                              state == SCI_BASE_PHY_STATE_STARTING)) {
 982                                 is_controller_start_complete = false;
 983                                 break;
 984                         }
 985                 }
 986
 987                 /*
 988                  * The controller has successfully finished the start process.
 989                  * Inform the SCI Core user and transition to the READY state. */
 990                 if (is_controller_start_complete == true) {
 991                         scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS);
 992                         scic_sds_controller_phy_timer_stop(scic);
 993                 }
 994         } else {
 995                 sci_phy = &ihost->phys[scic->next_phy_to_start].sci;
 996
 997                 if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
 998                         if (scic_sds_phy_get_port(sci_phy) == NULL) {
 999                                 scic->next_phy_to_start++;
1000
1001                                 /* Caution recursion ahead be forwarned
1002                                  *
1003                                  * The PHY was never added to a PORT in MPC mode
1004                                  * so start the next phy in sequence This phy
1005                                  * will never go link up and will not draw power
1006                                  * the OEM parameters either configured the phy
1007                                  * incorrectly for the PORT or it was never
1008                                  * assigned to a PORT
1009                                  */
1010                                 return scic_sds_controller_start_next_phy(scic);
1011                         }
1012                 }
1013
1014                 status = scic_sds_phy_start(sci_phy);
1015
1016                 if (status == SCI_SUCCESS) {
1017                         scic_sds_controller_phy_timer_start(scic);
1018                 } else {
1019                         dev_warn(scic_to_dev(scic),
1020                                  "%s: Controller stop operation failed "
1021                                  "to stop phy %d because of status "
1022                                  "%d.\n",
1023                                  __func__,
1024                                  ihost->phys[scic->next_phy_to_start].sci.phy_index,
1025                                  status);
1026                 }
1027
1028                 scic->next_phy_to_start++;
1029         }
1030
1031         return status;
1032 }
1033
1034 static void scic_sds_controller_phy_startup_timeout_handler(void *_scic)
1035 {
1036         struct scic_sds_controller *scic = _scic;
1037         enum sci_status status;
1038
1039         scic->phy_startup_timer_pending = false;
1040         status = SCI_FAILURE;
1041         while (status != SCI_SUCCESS)
1042                 status = scic_sds_controller_start_next_phy(scic);
1043 }
1044
1045 static enum sci_status scic_controller_start(struct scic_sds_controller *scic,
1046                                              u32 timeout)
1047 {
1048         struct isci_host *ihost = scic_to_ihost(scic);
1049         enum sci_status result;
1050         u16 index;
1051
1052         if (scic->state_machine.current_state_id !=
1053             SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
1054                 dev_warn(scic_to_dev(scic),
1055                          "SCIC Controller start operation requested in "
1056                          "invalid state\n");
1057                 return SCI_FAILURE_INVALID_STATE;
1058         }
1059
1060         /* Build the TCi free pool */
1061         sci_pool_initialize(scic->tci_pool);
1062         for (index = 0; index < scic->task_context_entries; index++)
1063                 sci_pool_put(scic->tci_pool, index);
1064
1065         /* Build the RNi free pool */
1066         scic_sds_remote_node_table_initialize(
1067                         &scic->available_remote_nodes,
1068                         scic->remote_node_entries);
1069
1070         /*
1071          * Before anything else lets make sure we will not be
1072          * interrupted by the hardware.
1073          */
1074         scic_controller_disable_interrupts(scic);
1075
1076         /* Enable the port task scheduler */
1077         scic_sds_controller_enable_port_task_scheduler(scic);
1078
1079         /* Assign all the task entries to scic physical function */
1080         scic_sds_controller_assign_task_entries(scic);
1081
1082         /* Now initialize the completion queue */
1083         scic_sds_controller_initialize_completion_queue(scic);
1084
1085         /* Initialize the unsolicited frame queue for use */
1086         scic_sds_controller_initialize_unsolicited_frame_queue(scic);
1087
1088         /* Start all of the ports on this controller */
1089         for (index = 0; index < scic->logical_port_entries; index++) {
1090                 struct scic_sds_port *sci_port = &ihost->ports[index].sci;
1091
1092                 result = sci_port->state_handlers->start_handler(sci_port);
1093                 if (result)
1094                         return result;
1095         }
1096
1097         scic_sds_controller_start_next_phy(scic);
1098
1099         isci_timer_start(scic->timeout_timer, timeout);
1100
1101         sci_base_state_machine_change_state(&scic->state_machine,
1102                                             SCI_BASE_CONTROLLER_STATE_STARTING);
1103
1104         return SCI_SUCCESS;
1105 }
1106
1107 void isci_host_scan_start(struct Scsi_Host *shost)
1108 {
1109         struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha;
1110         unsigned long tmo = scic_controller_get_suggested_start_timeout(&ihost->sci);
1111
1112         set_bit(IHOST_START_PENDING, &ihost->flags);
1113
1114         spin_lock_irq(&ihost->scic_lock);
1115         scic_controller_start(&ihost->sci, tmo);
1116         scic_controller_enable_interrupts(&ihost->sci);
1117         spin_unlock_irq(&ihost->scic_lock);
1118 }
1119
1120 static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status)
1121 {
1122         isci_host_change_state(ihost, isci_stopped);
1123         scic_controller_disable_interrupts(&ihost->sci);
1124         clear_bit(IHOST_STOP_PENDING, &ihost->flags);
1125         wake_up(&ihost->eventq);
1126 }
1127
1128 static void scic_sds_controller_completion_handler(struct scic_sds_controller *scic)
1129 {
1130         /* Empty out the completion queue */
1131         if (scic_sds_controller_completion_queue_has_entries(scic))
1132                 scic_sds_controller_process_completions(scic);
1133
1134         /* Clear the interrupt and enable all interrupts again */
1135         writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
1136         /* Could we write the value of SMU_ISR_COMPLETION? */
1137         writel(0xFF000000, &scic->smu_registers->interrupt_mask);
1138         writel(0, &scic->smu_registers->interrupt_mask);
1139 }
1140
1141 /**
1142  * isci_host_completion_routine() - This function is the delayed service
1143  *    routine that calls the sci core library's completion handler. It's
1144  *    scheduled as a tasklet from the interrupt service routine when interrupts
1145  *    in use, or set as the timeout function in polled mode.
1146  * @data: This parameter specifies the ISCI host object
1147  *
1148  */
1149 static void isci_host_completion_routine(unsigned long data)
1150 {
1151         struct isci_host *isci_host = (struct isci_host *)data;
1152         struct list_head    completed_request_list;
1153         struct list_head    errored_request_list;
1154         struct list_head    *current_position;
1155         struct list_head    *next_position;
1156         struct isci_request *request;
1157         struct isci_request *next_request;
1158         struct sas_task     *task;
1159
1160         INIT_LIST_HEAD(&completed_request_list);
1161         INIT_LIST_HEAD(&errored_request_list);
1162
1163         spin_lock_irq(&isci_host->scic_lock);
1164
1165         scic_sds_controller_completion_handler(&isci_host->sci);
1166
1167         /* Take the lists of completed I/Os from the host. */
1168
1169         list_splice_init(&isci_host->requests_to_complete,
1170                          &completed_request_list);
1171
1172         /* Take the list of errored I/Os from the host. */
1173         list_splice_init(&isci_host->requests_to_errorback,
1174                          &errored_request_list);
1175
1176         spin_unlock_irq(&isci_host->scic_lock);
1177
1178         /* Process any completions in the lists. */
1179         list_for_each_safe(current_position, next_position,
1180                            &completed_request_list) {
1181
1182                 request = list_entry(current_position, struct isci_request,
1183                                      completed_node);
1184                 task = isci_request_access_task(request);
1185
1186                 /* Normal notification (task_done) */
1187                 dev_dbg(&isci_host->pdev->dev,
1188                         "%s: Normal - request/task = %p/%p\n",
1189                         __func__,
1190                         request,
1191                         task);
1192
1193                 /* Return the task to libsas */
1194                 if (task != NULL) {
1195
1196                         task->lldd_task = NULL;
1197                         if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
1198
1199                                 /* If the task is already in the abort path,
1200                                 * the task_done callback cannot be called.
1201                                 */
1202                                 task->task_done(task);
1203                         }
1204                 }
1205                 /* Free the request object. */
1206                 isci_request_free(isci_host, request);
1207         }
1208         list_for_each_entry_safe(request, next_request, &errored_request_list,
1209                                  completed_node) {
1210
1211                 task = isci_request_access_task(request);
1212
1213                 /* Use sas_task_abort */
1214                 dev_warn(&isci_host->pdev->dev,
1215                          "%s: Error - request/task = %p/%p\n",
1216                          __func__,
1217                          request,
1218                          task);
1219
1220                 if (task != NULL) {
1221
1222                         /* Put the task into the abort path if it's not there
1223                          * already.
1224                          */
1225                         if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED))
1226                                 sas_task_abort(task);
1227
1228                 } else {
1229                         /* This is a case where the request has completed with a
1230                          * status such that it needed further target servicing,
1231                          * but the sas_task reference has already been removed
1232                          * from the request.  Since it was errored, it was not
1233                          * being aborted, so there is nothing to do except free
1234                          * it.
1235                          */
1236
1237                         spin_lock_irq(&isci_host->scic_lock);
1238                         /* Remove the request from the remote device's list
1239                         * of pending requests.
1240                         */
1241                         list_del_init(&request->dev_node);
1242                         spin_unlock_irq(&isci_host->scic_lock);
1243
1244                         /* Free the request object. */
1245                         isci_request_free(isci_host, request);
1246                 }
1247         }
1248
1249 }
1250
1251 /**
1252  * scic_controller_stop() - This method will stop an individual controller
1253  *    object.This method will invoke the associated user callback upon
1254  *    completion.  The completion callback is called when the following
1255  *    conditions are met: -# the method return status is SCI_SUCCESS. -# the
1256  *    controller has been quiesced. This method will ensure that all IO
1257  *    requests are quiesced, phys are stopped, and all additional operation by
1258  *    the hardware is halted.
1259  * @controller: the handle to the controller object to stop.
1260  * @timeout: This parameter specifies the number of milliseconds in which the
1261  *    stop operation should complete.
1262  *
1263  * The controller must be in the STARTED or STOPPED state. Indicate if the
1264  * controller stop method succeeded or failed in some way. SCI_SUCCESS if the
1265  * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the
1266  * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the
1267  * controller is not either in the STARTED or STOPPED states.
1268  */
1269 static enum sci_status scic_controller_stop(struct scic_sds_controller *scic,
1270                                             u32 timeout)
1271 {
1272         if (scic->state_machine.current_state_id !=
1273             SCI_BASE_CONTROLLER_STATE_READY) {
1274                 dev_warn(scic_to_dev(scic),
1275                          "SCIC Controller stop operation requested in "
1276                          "invalid state\n");
1277                 return SCI_FAILURE_INVALID_STATE;
1278         }
1279
1280         isci_timer_start(scic->timeout_timer, timeout);
1281         sci_base_state_machine_change_state(&scic->state_machine,
1282                                             SCI_BASE_CONTROLLER_STATE_STOPPING);
1283         return SCI_SUCCESS;
1284 }
1285
1286 /**
1287  * scic_controller_reset() - This method will reset the supplied core
1288  *    controller regardless of the state of said controller.  This operation is
1289  *    considered destructive.  In other words, all current operations are wiped
1290  *    out.  No IO completions for outstanding devices occur.  Outstanding IO
1291  *    requests are not aborted or completed at the actual remote device.
1292  * @controller: the handle to the controller object to reset.
1293  *
1294  * Indicate if the controller reset method succeeded or failed in some way.
1295  * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if
1296  * the controller reset operation is unable to complete.
1297  */
1298 static enum sci_status scic_controller_reset(struct scic_sds_controller *scic)
1299 {
1300         switch (scic->state_machine.current_state_id) {
1301         case SCI_BASE_CONTROLLER_STATE_RESET:
1302         case SCI_BASE_CONTROLLER_STATE_READY:
1303         case SCI_BASE_CONTROLLER_STATE_STOPPED:
1304         case SCI_BASE_CONTROLLER_STATE_FAILED:
1305                 /*
1306                  * The reset operation is not a graceful cleanup, just
1307                  * perform the state transition.
1308                  */
1309                 sci_base_state_machine_change_state(&scic->state_machine,
1310                                 SCI_BASE_CONTROLLER_STATE_RESETTING);
1311                 return SCI_SUCCESS;
1312         default:
1313                 dev_warn(scic_to_dev(scic),
1314                          "SCIC Controller reset operation requested in "
1315                          "invalid state\n");
1316                 return SCI_FAILURE_INVALID_STATE;
1317         }
1318 }
1319
1320 void isci_host_deinit(struct isci_host *ihost)
1321 {
1322         int i;
1323
1324         isci_host_change_state(ihost, isci_stopping);
1325         for (i = 0; i < SCI_MAX_PORTS; i++) {
1326                 struct isci_port *iport = &ihost->ports[i];
1327                 struct isci_remote_device *idev, *d;
1328
1329                 list_for_each_entry_safe(idev, d, &iport->remote_dev_list, node) {
1330                         isci_remote_device_change_state(idev, isci_stopping);
1331                         isci_remote_device_stop(ihost, idev);
1332                 }
1333         }
1334
1335         set_bit(IHOST_STOP_PENDING, &ihost->flags);
1336
1337         spin_lock_irq(&ihost->scic_lock);
1338         scic_controller_stop(&ihost->sci, SCIC_CONTROLLER_STOP_TIMEOUT);
1339         spin_unlock_irq(&ihost->scic_lock);
1340
1341         wait_for_stop(ihost);
1342         scic_controller_reset(&ihost->sci);
1343         isci_timer_list_destroy(ihost);
1344 }
1345
1346 static void __iomem *scu_base(struct isci_host *isci_host)
1347 {
1348         struct pci_dev *pdev = isci_host->pdev;
1349         int id = isci_host->id;
1350
1351         return pcim_iomap_table(pdev)[SCI_SCU_BAR * 2] + SCI_SCU_BAR_SIZE * id;
1352 }
1353
1354 static void __iomem *smu_base(struct isci_host *isci_host)
1355 {
1356         struct pci_dev *pdev = isci_host->pdev;
1357         int id = isci_host->id;
1358
1359         return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id;
1360 }
1361
1362 static void isci_user_parameters_get(
1363                 struct isci_host *isci_host,
1364                 union scic_user_parameters *scic_user_params)
1365 {
1366         struct scic_sds_user_parameters *u = &scic_user_params->sds1;
1367         int i;
1368
1369         for (i = 0; i < SCI_MAX_PHYS; i++) {
1370                 struct sci_phy_user_params *u_phy = &u->phys[i];
1371
1372                 u_phy->max_speed_generation = phy_gen;
1373
1374                 /* we are not exporting these for now */
1375                 u_phy->align_insertion_frequency = 0x7f;
1376                 u_phy->in_connection_align_insertion_frequency = 0xff;
1377                 u_phy->notify_enable_spin_up_insertion_frequency = 0x33;
1378         }
1379
1380         u->stp_inactivity_timeout = stp_inactive_to;
1381         u->ssp_inactivity_timeout = ssp_inactive_to;
1382         u->stp_max_occupancy_timeout = stp_max_occ_to;
1383         u->ssp_max_occupancy_timeout = ssp_max_occ_to;
1384         u->no_outbound_task_timeout = no_outbound_task_to;
1385         u->max_number_concurrent_device_spin_up = max_concurr_spinup;
1386 }
1387
1388 static void scic_sds_controller_initial_state_enter(void *object)
1389 {
1390         struct scic_sds_controller *scic = object;
1391
1392         sci_base_state_machine_change_state(&scic->state_machine,
1393                         SCI_BASE_CONTROLLER_STATE_RESET);
1394 }
1395
1396 static inline void scic_sds_controller_starting_state_exit(void *object)
1397 {
1398         struct scic_sds_controller *scic = object;
1399
1400         isci_timer_stop(scic->timeout_timer);
1401 }
1402
1403 #define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853
1404 #define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280
1405 #define INTERRUPT_COALESCE_TIMEOUT_MAX_US                    2700000
1406 #define INTERRUPT_COALESCE_NUMBER_MAX                        256
1407 #define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN                7
1408 #define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX                28
1409
1410 /**
1411  * scic_controller_set_interrupt_coalescence() - This method allows the user to
1412  *    configure the interrupt coalescence.
1413  * @controller: This parameter represents the handle to the controller object
1414  *    for which its interrupt coalesce register is overridden.
1415  * @coalesce_number: Used to control the number of entries in the Completion
1416  *    Queue before an interrupt is generated. If the number of entries exceed
1417  *    this number, an interrupt will be generated. The valid range of the input
1418  *    is [0, 256]. A setting of 0 results in coalescing being disabled.
1419  * @coalesce_timeout: Timeout value in microseconds. The valid range of the
1420  *    input is [0, 2700000] . A setting of 0 is allowed and results in no
1421  *    interrupt coalescing timeout.
1422  *
1423  * Indicate if the user successfully set the interrupt coalesce parameters.
1424  * SCI_SUCCESS The user successfully updated the interrutp coalescence.
1425  * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range.
1426  */
1427 static enum sci_status scic_controller_set_interrupt_coalescence(
1428         struct scic_sds_controller *scic_controller,
1429         u32 coalesce_number,
1430         u32 coalesce_timeout)
1431 {
1432         u8 timeout_encode = 0;
1433         u32 min = 0;
1434         u32 max = 0;
1435
1436         /* Check if the input parameters fall in the range. */
1437         if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX)
1438                 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
1439
1440         /*
1441          *  Defined encoding for interrupt coalescing timeout:
1442          *              Value   Min      Max     Units
1443          *              -----   ---      ---     -----
1444          *              0       -        -       Disabled
1445          *              1       13.3     20.0    ns
1446          *              2       26.7     40.0
1447          *              3       53.3     80.0
1448          *              4       106.7    160.0
1449          *              5       213.3    320.0
1450          *              6       426.7    640.0
1451          *              7       853.3    1280.0
1452          *              8       1.7      2.6     us
1453          *              9       3.4      5.1
1454          *              10      6.8      10.2
1455          *              11      13.7     20.5
1456          *              12      27.3     41.0
1457          *              13      54.6     81.9
1458          *              14      109.2    163.8
1459          *              15      218.5    327.7
1460          *              16      436.9    655.4
1461          *              17      873.8    1310.7
1462          *              18      1.7      2.6     ms
1463          *              19      3.5      5.2
1464          *              20      7.0      10.5
1465          *              21      14.0     21.0
1466          *              22      28.0     41.9
1467          *              23      55.9     83.9
1468          *              24      111.8    167.8
1469          *              25      223.7    335.5
1470          *              26      447.4    671.1
1471          *              27      894.8    1342.2
1472          *              28      1.8      2.7     s
1473          *              Others Undefined */
1474
1475         /*
1476          * Use the table above to decide the encode of interrupt coalescing timeout
1477          * value for register writing. */
1478         if (coalesce_timeout == 0)
1479                 timeout_encode = 0;
1480         else{
1481                 /* make the timeout value in unit of (10 ns). */
1482                 coalesce_timeout = coalesce_timeout * 100;
1483                 min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10;
1484                 max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10;
1485
1486                 /* get the encode of timeout for register writing. */
1487                 for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN;
1488                       timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX;
1489                       timeout_encode++) {
1490                         if (min <= coalesce_timeout &&  max > coalesce_timeout)
1491                                 break;
1492                         else if (coalesce_timeout >= max && coalesce_timeout < min * 2
1493                                  && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) {
1494                                 if ((coalesce_timeout - max) < (2 * min - coalesce_timeout))
1495                                         break;
1496                                 else{
1497                                         timeout_encode++;
1498                                         break;
1499                                 }
1500                         } else {
1501                                 max = max * 2;
1502                                 min = min * 2;
1503                         }
1504                 }
1505
1506                 if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1)
1507                         /* the value is out of range. */
1508                         return SCI_FAILURE_INVALID_PARAMETER_VALUE;
1509         }
1510
1511         writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) |
1512                SMU_ICC_GEN_VAL(TIMER, timeout_encode),
1513                &scic_controller->smu_registers->interrupt_coalesce_control);
1514
1515
1516         scic_controller->interrupt_coalesce_number = (u16)coalesce_number;
1517         scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100;
1518
1519         return SCI_SUCCESS;
1520 }
1521
1522
1523 static void scic_sds_controller_ready_state_enter(void *object)
1524 {
1525         struct scic_sds_controller *scic = object;
1526
1527         /* set the default interrupt coalescence number and timeout value. */
1528         scic_controller_set_interrupt_coalescence(scic, 0x10, 250);
1529 }
1530
1531 static void scic_sds_controller_ready_state_exit(void *object)
1532 {
1533         struct scic_sds_controller *scic = object;
1534
1535         /* disable interrupt coalescence. */
1536         scic_controller_set_interrupt_coalescence(scic, 0, 0);
1537 }
1538
1539 static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic)
1540 {
1541         u32 index;
1542         enum sci_status status;
1543         enum sci_status phy_status;
1544         struct isci_host *ihost = scic_to_ihost(scic);
1545
1546         status = SCI_SUCCESS;
1547
1548         for (index = 0; index < SCI_MAX_PHYS; index++) {
1549                 phy_status = scic_sds_phy_stop(&ihost->phys[index].sci);
1550
1551                 if (phy_status != SCI_SUCCESS &&
1552                     phy_status != SCI_FAILURE_INVALID_STATE) {
1553                         status = SCI_FAILURE;
1554
1555                         dev_warn(scic_to_dev(scic),
1556                                  "%s: Controller stop operation failed to stop "
1557                                  "phy %d because of status %d.\n",
1558                                  __func__,
1559                                  ihost->phys[index].sci.phy_index, phy_status);
1560                 }
1561         }
1562
1563         return status;
1564 }
1565
1566 static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic)
1567 {
1568         u32 index;
1569         enum sci_status port_status;
1570         enum sci_status status = SCI_SUCCESS;
1571         struct isci_host *ihost = scic_to_ihost(scic);
1572
1573         for (index = 0; index < scic->logical_port_entries; index++) {
1574                 struct scic_sds_port *sci_port = &ihost->ports[index].sci;
1575                 scic_sds_port_handler_t stop;
1576
1577                 stop = sci_port->state_handlers->stop_handler;
1578                 port_status = stop(sci_port);
1579
1580                 if ((port_status != SCI_SUCCESS) &&
1581                     (port_status != SCI_FAILURE_INVALID_STATE)) {
1582                         status = SCI_FAILURE;
1583
1584                         dev_warn(scic_to_dev(scic),
1585                                  "%s: Controller stop operation failed to "
1586                                  "stop port %d because of status %d.\n",
1587                                  __func__,
1588                                  sci_port->logical_port_index,
1589                                  port_status);
1590                 }
1591         }
1592
1593         return status;
1594 }
1595
1596 static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic)
1597 {
1598         u32 index;
1599         enum sci_status status;
1600         enum sci_status device_status;
1601
1602         status = SCI_SUCCESS;
1603
1604         for (index = 0; index < scic->remote_node_entries; index++) {
1605                 if (scic->device_table[index] != NULL) {
1606                         /* / @todo What timeout value do we want to provide to this request? */
1607                         device_status = scic_remote_device_stop(scic->device_table[index], 0);
1608
1609                         if ((device_status != SCI_SUCCESS) &&
1610                             (device_status != SCI_FAILURE_INVALID_STATE)) {
1611                                 dev_warn(scic_to_dev(scic),
1612                                          "%s: Controller stop operation failed "
1613                                          "to stop device 0x%p because of "
1614                                          "status %d.\n",
1615                                          __func__,
1616                                          scic->device_table[index], device_status);
1617                         }
1618                 }
1619         }
1620
1621         return status;
1622 }
1623
1624 static void scic_sds_controller_stopping_state_enter(void *object)
1625 {
1626         struct scic_sds_controller *scic = object;
1627
1628         /* Stop all of the components for this controller */
1629         scic_sds_controller_stop_phys(scic);
1630         scic_sds_controller_stop_ports(scic);
1631         scic_sds_controller_stop_devices(scic);
1632 }
1633
1634 static void scic_sds_controller_stopping_state_exit(void *object)
1635 {
1636         struct scic_sds_controller *scic = object;
1637
1638         isci_timer_stop(scic->timeout_timer);
1639 }
1640
1641
1642 /**
1643  * scic_sds_controller_reset_hardware() -
1644  *
1645  * This method will reset the controller hardware.
1646  */
1647 static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic)
1648 {
1649         /* Disable interrupts so we dont take any spurious interrupts */
1650         scic_controller_disable_interrupts(scic);
1651
1652         /* Reset the SCU */
1653         writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control);
1654
1655         /* Delay for 1ms to before clearing the CQP and UFQPR. */
1656         udelay(1000);
1657
1658         /* The write to the CQGR clears the CQP */
1659         writel(0x00000000, &scic->smu_registers->completion_queue_get);
1660
1661         /* The write to the UFQGP clears the UFQPR */
1662         writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
1663 }
1664
1665 static void scic_sds_controller_resetting_state_enter(void *object)
1666 {
1667         struct scic_sds_controller *scic = object;
1668
1669         scic_sds_controller_reset_hardware(scic);
1670         sci_base_state_machine_change_state(&scic->state_machine,
1671                                             SCI_BASE_CONTROLLER_STATE_RESET);
1672 }
1673
1674 static const struct sci_base_state scic_sds_controller_state_table[] = {
1675         [SCI_BASE_CONTROLLER_STATE_INITIAL] = {
1676                 .enter_state = scic_sds_controller_initial_state_enter,
1677         },
1678         [SCI_BASE_CONTROLLER_STATE_RESET] = {},
1679         [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {},
1680         [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {},
1681         [SCI_BASE_CONTROLLER_STATE_STARTING] = {
1682                 .exit_state  = scic_sds_controller_starting_state_exit,
1683         },
1684         [SCI_BASE_CONTROLLER_STATE_READY] = {
1685                 .enter_state = scic_sds_controller_ready_state_enter,
1686                 .exit_state  = scic_sds_controller_ready_state_exit,
1687         },
1688         [SCI_BASE_CONTROLLER_STATE_RESETTING] = {
1689                 .enter_state = scic_sds_controller_resetting_state_enter,
1690         },
1691         [SCI_BASE_CONTROLLER_STATE_STOPPING] = {
1692                 .enter_state = scic_sds_controller_stopping_state_enter,
1693                 .exit_state = scic_sds_controller_stopping_state_exit,
1694         },
1695         [SCI_BASE_CONTROLLER_STATE_STOPPED] = {},
1696         [SCI_BASE_CONTROLLER_STATE_FAILED] = {}
1697 };
1698
1699 static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic)
1700 {
1701         /* these defaults are overridden by the platform / firmware */
1702         struct isci_host *ihost = scic_to_ihost(scic);
1703         u16 index;
1704
1705         /* Default to APC mode. */
1706         scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
1707
1708         /* Default to APC mode. */
1709         scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1;
1710
1711         /* Default to no SSC operation. */
1712         scic->oem_parameters.sds1.controller.do_enable_ssc = false;
1713
1714         /* Initialize all of the port parameter information to narrow ports. */
1715         for (index = 0; index < SCI_MAX_PORTS; index++) {
1716                 scic->oem_parameters.sds1.ports[index].phy_mask = 0;
1717         }
1718
1719         /* Initialize all of the phy parameter information. */
1720         for (index = 0; index < SCI_MAX_PHYS; index++) {
1721                 /* Default to 6G (i.e. Gen 3) for now. */
1722                 scic->user_parameters.sds1.phys[index].max_speed_generation = 3;
1723
1724                 /* the frequencies cannot be 0 */
1725                 scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f;
1726                 scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff;
1727                 scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33;
1728
1729                 /*
1730                  * Previous Vitesse based expanders had a arbitration issue that
1731                  * is worked around by having the upper 32-bits of SAS address
1732                  * with a value greater then the Vitesse company identifier.
1733                  * Hence, usage of 0x5FCFFFFF. */
1734                 scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id;
1735                 scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF;
1736         }
1737
1738         scic->user_parameters.sds1.stp_inactivity_timeout = 5;
1739         scic->user_parameters.sds1.ssp_inactivity_timeout = 5;
1740         scic->user_parameters.sds1.stp_max_occupancy_timeout = 5;
1741         scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
1742         scic->user_parameters.sds1.no_outbound_task_timeout = 20;
1743 }
1744
1745
1746
1747 /**
1748  * scic_controller_construct() - This method will attempt to construct a
1749  *    controller object utilizing the supplied parameter information.
1750  * @c: This parameter specifies the controller to be constructed.
1751  * @scu_base: mapped base address of the scu registers
1752  * @smu_base: mapped base address of the smu registers
1753  *
1754  * Indicate if the controller was successfully constructed or if it failed in
1755  * some way. SCI_SUCCESS This value is returned if the controller was
1756  * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned
1757  * if the interrupt coalescence timer may cause SAS compliance issues for SMP
1758  * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE
1759  * This value is returned if the controller does not support the supplied type.
1760  * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the
1761  * controller does not support the supplied initialization data version.
1762  */
1763 static enum sci_status scic_controller_construct(struct scic_sds_controller *scic,
1764                                           void __iomem *scu_base,
1765                                           void __iomem *smu_base)
1766 {
1767         struct isci_host *ihost = scic_to_ihost(scic);
1768         u8 i;
1769
1770         sci_base_state_machine_construct(&scic->state_machine,
1771                 scic, scic_sds_controller_state_table,
1772                 SCI_BASE_CONTROLLER_STATE_INITIAL);
1773
1774         sci_base_state_machine_start(&scic->state_machine);
1775
1776         scic->scu_registers = scu_base;
1777         scic->smu_registers = smu_base;
1778
1779         scic_sds_port_configuration_agent_construct(&scic->port_agent);
1780
1781         /* Construct the ports for this controller */
1782         for (i = 0; i < SCI_MAX_PORTS; i++)
1783                 scic_sds_port_construct(&ihost->ports[i].sci, i, scic);
1784         scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic);
1785
1786         /* Construct the phys for this controller */
1787         for (i = 0; i < SCI_MAX_PHYS; i++) {
1788                 /* Add all the PHYs to the dummy port */
1789                 scic_sds_phy_construct(&ihost->phys[i].sci,
1790                                        &ihost->ports[SCI_MAX_PORTS].sci, i);
1791         }
1792
1793         scic->invalid_phy_mask = 0;
1794
1795         /* Set the default maximum values */
1796         scic->completion_event_entries      = SCU_EVENT_COUNT;
1797         scic->completion_queue_entries      = SCU_COMPLETION_QUEUE_COUNT;
1798         scic->remote_node_entries           = SCI_MAX_REMOTE_DEVICES;
1799         scic->logical_port_entries          = SCI_MAX_PORTS;
1800         scic->task_context_entries          = SCU_IO_REQUEST_COUNT;
1801         scic->uf_control.buffers.count      = SCU_UNSOLICITED_FRAME_COUNT;
1802         scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT;
1803
1804         /* Initialize the User and OEM parameters to default values. */
1805         scic_sds_controller_set_default_config_parameters(scic);
1806
1807         return scic_controller_reset(scic);
1808 }
1809
1810 int scic_oem_parameters_validate(struct scic_sds_oem_params *oem)
1811 {
1812         int i;
1813
1814         for (i = 0; i < SCI_MAX_PORTS; i++)
1815                 if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX)
1816                         return -EINVAL;
1817
1818         for (i = 0; i < SCI_MAX_PHYS; i++)
1819                 if (oem->phys[i].sas_address.high == 0 &&
1820                     oem->phys[i].sas_address.low == 0)
1821                         return -EINVAL;
1822
1823         if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) {
1824                 for (i = 0; i < SCI_MAX_PHYS; i++)
1825                         if (oem->ports[i].phy_mask != 0)
1826                                 return -EINVAL;
1827         } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
1828                 u8 phy_mask = 0;
1829
1830                 for (i = 0; i < SCI_MAX_PHYS; i++)
1831                         phy_mask |= oem->ports[i].phy_mask;
1832
1833                 if (phy_mask == 0)
1834                         return -EINVAL;
1835         } else
1836                 return -EINVAL;
1837
1838         if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
1839                 return -EINVAL;
1840
1841         return 0;
1842 }
1843
1844 static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic,
1845                                         union scic_oem_parameters *scic_parms)
1846 {
1847         u32 state = scic->state_machine.current_state_id;
1848
1849         if (state == SCI_BASE_CONTROLLER_STATE_RESET ||
1850             state == SCI_BASE_CONTROLLER_STATE_INITIALIZING ||
1851             state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
1852
1853                 if (scic_oem_parameters_validate(&scic_parms->sds1))
1854                         return SCI_FAILURE_INVALID_PARAMETER_VALUE;
1855                 scic->oem_parameters.sds1 = scic_parms->sds1;
1856
1857                 return SCI_SUCCESS;
1858         }
1859
1860         return SCI_FAILURE_INVALID_STATE;
1861 }
1862
1863 void scic_oem_parameters_get(
1864         struct scic_sds_controller *scic,
1865         union scic_oem_parameters *scic_parms)
1866 {
1867         memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms));
1868 }
1869
1870 static void scic_sds_controller_timeout_handler(void *_scic)
1871 {
1872         struct scic_sds_controller *scic = _scic;
1873         struct isci_host *ihost = scic_to_ihost(scic);
1874         struct sci_base_state_machine *sm = &scic->state_machine;
1875
1876         if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING)
1877                 scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT);
1878         else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) {
1879                 sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED);
1880                 isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT);
1881         } else  /* / @todo Now what do we want to do in this case? */
1882                 dev_err(scic_to_dev(scic),
1883                         "%s: Controller timer fired when controller was not "
1884                         "in a state being timed.\n",
1885                         __func__);
1886 }
1887
1888 static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic)
1889 {
1890         struct isci_host *ihost = scic_to_ihost(scic);
1891
1892         scic->phy_startup_timer = isci_timer_create(ihost,
1893                                                     scic,
1894                                                     scic_sds_controller_phy_startup_timeout_handler);
1895
1896         if (scic->phy_startup_timer == NULL)
1897                 return SCI_FAILURE_INSUFFICIENT_RESOURCES;
1898         else {
1899                 scic->next_phy_to_start = 0;
1900                 scic->phy_startup_timer_pending = false;
1901         }
1902
1903         return SCI_SUCCESS;
1904 }
1905
1906 static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic)
1907 {
1908         isci_timer_start(scic->power_control.timer,
1909                          SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
1910
1911         scic->power_control.timer_started = true;
1912 }
1913
1914 static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic)
1915 {
1916         if (scic->power_control.timer_started) {
1917                 isci_timer_stop(scic->power_control.timer);
1918                 scic->power_control.timer_started = false;
1919         }
1920 }
1921
1922 static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic)
1923 {
1924         scic_sds_controller_power_control_timer_stop(scic);
1925         scic_sds_controller_power_control_timer_start(scic);
1926 }
1927
1928 static void scic_sds_controller_power_control_timer_handler(
1929         void *controller)
1930 {
1931         struct scic_sds_controller *scic;
1932
1933         scic = (struct scic_sds_controller *)controller;
1934
1935         scic->power_control.phys_granted_power = 0;
1936
1937         if (scic->power_control.phys_waiting == 0) {
1938                 scic->power_control.timer_started = false;
1939         } else {
1940                 struct scic_sds_phy *sci_phy = NULL;
1941                 u8 i;
1942
1943                 for (i = 0;
1944                      (i < SCI_MAX_PHYS)
1945                      && (scic->power_control.phys_waiting != 0);
1946                      i++) {
1947                         if (scic->power_control.requesters[i] != NULL) {
1948                                 if (scic->power_control.phys_granted_power <
1949                                     scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
1950                                         sci_phy = scic->power_control.requesters[i];
1951                                         scic->power_control.requesters[i] = NULL;
1952                                         scic->power_control.phys_waiting--;
1953                                         scic->power_control.phys_granted_power++;
1954                                         scic_sds_phy_consume_power_handler(sci_phy);
1955                                 } else {
1956                                         break;
1957                                 }
1958                         }
1959                 }
1960
1961                 /*
1962                  * It doesn't matter if the power list is empty, we need to start the
1963                  * timer in case another phy becomes ready.
1964                  */
1965                 scic_sds_controller_power_control_timer_start(scic);
1966         }
1967 }
1968
1969 /**
1970  * This method inserts the phy in the stagger spinup control queue.
1971  * @scic:
1972  *
1973  *
1974  */
1975 void scic_sds_controller_power_control_queue_insert(
1976         struct scic_sds_controller *scic,
1977         struct scic_sds_phy *sci_phy)
1978 {
1979         BUG_ON(sci_phy == NULL);
1980
1981         if (scic->power_control.phys_granted_power <
1982             scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
1983                 scic->power_control.phys_granted_power++;
1984                 scic_sds_phy_consume_power_handler(sci_phy);
1985
1986                 /*
1987                  * stop and start the power_control timer. When the timer fires, the
1988                  * no_of_phys_granted_power will be set to 0
1989                  */
1990                 scic_sds_controller_power_control_timer_restart(scic);
1991         } else {
1992                 /* Add the phy in the waiting list */
1993                 scic->power_control.requesters[sci_phy->phy_index] = sci_phy;
1994                 scic->power_control.phys_waiting++;
1995         }
1996 }
1997
1998 /**
1999  * This method removes the phy from the stagger spinup control queue.
2000  * @scic:
2001  *
2002  *
2003  */
2004 void scic_sds_controller_power_control_queue_remove(
2005         struct scic_sds_controller *scic,
2006         struct scic_sds_phy *sci_phy)
2007 {
2008         BUG_ON(sci_phy == NULL);
2009
2010         if (scic->power_control.requesters[sci_phy->phy_index] != NULL) {
2011                 scic->power_control.phys_waiting--;
2012         }
2013
2014         scic->power_control.requesters[sci_phy->phy_index] = NULL;
2015 }
2016
2017 #define AFE_REGISTER_WRITE_DELAY 10
2018
2019 /* Initialize the AFE for this phy index. We need to read the AFE setup from
2020  * the OEM parameters
2021  */
2022 static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
2023 {
2024         const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
2025         u32 afe_status;
2026         u32 phy_id;
2027
2028         /* Clear DFX Status registers */
2029         writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0);
2030         udelay(AFE_REGISTER_WRITE_DELAY);
2031
2032         if (is_b0()) {
2033                 /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
2034                  * Timer, PM Stagger Timer */
2035                 writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2);
2036                 udelay(AFE_REGISTER_WRITE_DELAY);
2037         }
2038
2039         /* Configure bias currents to normal */
2040         if (is_a0())
2041                 writel(0x00005500, &scic->scu_registers->afe.afe_bias_control);
2042         else if (is_a2())
2043                 writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control);
2044         else if (is_b0())
2045                 writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control);
2046
2047         udelay(AFE_REGISTER_WRITE_DELAY);
2048
2049         /* Enable PLL */
2050         if (is_b0())
2051                 writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0);
2052         else
2053                 writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0);
2054
2055         udelay(AFE_REGISTER_WRITE_DELAY);
2056
2057         /* Wait for the PLL to lock */
2058         do {
2059                 afe_status = readl(&scic->scu_registers->afe.afe_common_block_status);
2060                 udelay(AFE_REGISTER_WRITE_DELAY);
2061         } while ((afe_status & 0x00001000) == 0);
2062
2063         if (is_a0() || is_a2()) {
2064                 /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */
2065                 writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0);
2066                 udelay(AFE_REGISTER_WRITE_DELAY);
2067         }
2068
2069         for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
2070                 const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
2071
2072                 if (is_b0()) {
2073                          /* Configure transmitter SSC parameters */
2074                         writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
2075                         udelay(AFE_REGISTER_WRITE_DELAY);
2076                 } else {
2077                         /*
2078                          * All defaults, except the Receive Word Alignament/Comma Detect
2079                          * Enable....(0xe800) */
2080                         writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
2081                         udelay(AFE_REGISTER_WRITE_DELAY);
2082
2083                         writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1);
2084                         udelay(AFE_REGISTER_WRITE_DELAY);
2085                 }
2086
2087                 /*
2088                  * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
2089                  * & increase TX int & ext bias 20%....(0xe85c) */
2090                 if (is_a0())
2091                         writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
2092                 else if (is_a2())
2093                         writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
2094                 else {
2095                          /* Power down TX and RX (PWRDNTX and PWRDNRX) */
2096                         writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
2097                         udelay(AFE_REGISTER_WRITE_DELAY);
2098
2099                         /*
2100                          * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
2101                          * & increase TX int & ext bias 20%....(0xe85c) */
2102                         writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
2103                 }
2104                 udelay(AFE_REGISTER_WRITE_DELAY);
2105
2106                 if (is_a0() || is_a2()) {
2107                         /* Enable TX equalization (0xe824) */
2108                         writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
2109                         udelay(AFE_REGISTER_WRITE_DELAY);
2110                 }
2111
2112                 /*
2113                  * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On),
2114                  * RDD=0x0(RX Detect Enabled) ....(0xe800) */
2115                 writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
2116                 udelay(AFE_REGISTER_WRITE_DELAY);
2117
2118                 /* Leave DFE/FFE on */
2119                 if (is_a0())
2120                         writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
2121                 else if (is_a2())
2122                         writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
2123                 else {
2124                         writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
2125                         udelay(AFE_REGISTER_WRITE_DELAY);
2126                         /* Enable TX equalization (0xe824) */
2127                         writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
2128                 }
2129                 udelay(AFE_REGISTER_WRITE_DELAY);
2130
2131                 writel(oem_phy->afe_tx_amp_control0,
2132                         &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0);
2133                 udelay(AFE_REGISTER_WRITE_DELAY);
2134
2135                 writel(oem_phy->afe_tx_amp_control1,
2136                         &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1);
2137                 udelay(AFE_REGISTER_WRITE_DELAY);
2138
2139                 writel(oem_phy->afe_tx_amp_control2,
2140                         &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2);
2141                 udelay(AFE_REGISTER_WRITE_DELAY);
2142
2143                 writel(oem_phy->afe_tx_amp_control3,
2144                         &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3);
2145                 udelay(AFE_REGISTER_WRITE_DELAY);
2146         }
2147
2148         /* Transfer control to the PEs */
2149         writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0);
2150         udelay(AFE_REGISTER_WRITE_DELAY);
2151 }
2152
2153 static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic,
2154                                                 enum sci_controller_mode operating_mode)
2155 {
2156         enum sci_status status          = SCI_SUCCESS;
2157
2158         if ((scic->state_machine.current_state_id ==
2159                                 SCI_BASE_CONTROLLER_STATE_INITIALIZING) ||
2160             (scic->state_machine.current_state_id ==
2161                                 SCI_BASE_CONTROLLER_STATE_INITIALIZED)) {
2162                 switch (operating_mode) {
2163                 case SCI_MODE_SPEED:
2164                         scic->remote_node_entries      = SCI_MAX_REMOTE_DEVICES;
2165                         scic->task_context_entries     = SCU_IO_REQUEST_COUNT;
2166                         scic->uf_control.buffers.count =
2167                                 SCU_UNSOLICITED_FRAME_COUNT;
2168                         scic->completion_event_entries = SCU_EVENT_COUNT;
2169                         scic->completion_queue_entries =
2170                                 SCU_COMPLETION_QUEUE_COUNT;
2171                         break;
2172
2173                 case SCI_MODE_SIZE:
2174                         scic->remote_node_entries      = SCI_MIN_REMOTE_DEVICES;
2175                         scic->task_context_entries     = SCI_MIN_IO_REQUESTS;
2176                         scic->uf_control.buffers.count =
2177                                 SCU_MIN_UNSOLICITED_FRAMES;
2178                         scic->completion_event_entries = SCU_MIN_EVENTS;
2179                         scic->completion_queue_entries =
2180                                 SCU_MIN_COMPLETION_QUEUE_ENTRIES;
2181                         break;
2182
2183                 default:
2184                         status = SCI_FAILURE_INVALID_PARAMETER_VALUE;
2185                         break;
2186                 }
2187         } else
2188                 status = SCI_FAILURE_INVALID_STATE;
2189
2190         return status;
2191 }
2192
2193 static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic)
2194 {
2195         struct isci_host *ihost = scic_to_ihost(scic);
2196         scic->power_control.timer = isci_timer_create(ihost,
2197                                                       scic,
2198                                         scic_sds_controller_power_control_timer_handler);
2199
2200         memset(scic->power_control.requesters, 0,
2201                sizeof(scic->power_control.requesters));
2202
2203         scic->power_control.phys_waiting = 0;
2204         scic->power_control.phys_granted_power = 0;
2205 }
2206
2207 static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic)
2208 {
2209         struct sci_base_state_machine *sm = &scic->state_machine;
2210         enum sci_status result = SCI_SUCCESS;
2211         struct isci_host *ihost = scic_to_ihost(scic);
2212         u32 index, state;
2213
2214         if (scic->state_machine.current_state_id !=
2215             SCI_BASE_CONTROLLER_STATE_RESET) {
2216                 dev_warn(scic_to_dev(scic),
2217                          "SCIC Controller initialize operation requested "
2218                          "in invalid state\n");
2219                 return SCI_FAILURE_INVALID_STATE;
2220         }
2221
2222         sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING);
2223
2224         scic->timeout_timer = isci_timer_create(ihost, scic,
2225                                                 scic_sds_controller_timeout_handler);
2226
2227         scic_sds_controller_initialize_phy_startup(scic);
2228
2229         scic_sds_controller_initialize_power_control(scic);
2230
2231         /*
2232          * There is nothing to do here for B0 since we do not have to
2233          * program the AFE registers.
2234          * / @todo The AFE settings are supposed to be correct for the B0 but
2235          * /       presently they seem to be wrong. */
2236         scic_sds_controller_afe_initialization(scic);
2237
2238         if (result == SCI_SUCCESS) {
2239                 u32 status;
2240                 u32 terminate_loop;
2241
2242                 /* Take the hardware out of reset */
2243                 writel(0, &scic->smu_registers->soft_reset_control);
2244
2245                 /*
2246                  * / @todo Provide meaningfull error code for hardware failure
2247                  * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
2248                 result = SCI_FAILURE;
2249                 terminate_loop = 100;
2250
2251                 while (terminate_loop-- && (result != SCI_SUCCESS)) {
2252                         /* Loop until the hardware reports success */
2253                         udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
2254                         status = readl(&scic->smu_registers->control_status);
2255
2256                         if ((status & SCU_RAM_INIT_COMPLETED) ==
2257                                         SCU_RAM_INIT_COMPLETED)
2258                                 result = SCI_SUCCESS;
2259                 }
2260         }
2261
2262         if (result == SCI_SUCCESS) {
2263                 u32 max_supported_ports;
2264                 u32 max_supported_devices;
2265                 u32 max_supported_io_requests;
2266                 u32 device_context_capacity;
2267
2268                 /*
2269                  * Determine what are the actaul device capacities that the
2270                  * hardware will support */
2271                 device_context_capacity =
2272                         readl(&scic->smu_registers->device_context_capacity);
2273
2274
2275                 max_supported_ports = smu_dcc_get_max_ports(device_context_capacity);
2276                 max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity);
2277                 max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity);
2278
2279                 /*
2280                  * Make all PEs that are unassigned match up with the
2281                  * logical ports
2282                  */
2283                 for (index = 0; index < max_supported_ports; index++) {
2284                         struct scu_port_task_scheduler_group_registers __iomem
2285                                 *ptsg = &scic->scu_registers->peg0.ptsg;
2286
2287                         writel(index, &ptsg->protocol_engine[index]);
2288                 }
2289
2290                 /* Record the smaller of the two capacity values */
2291                 scic->logical_port_entries =
2292                         min(max_supported_ports, scic->logical_port_entries);
2293
2294                 scic->task_context_entries =
2295                         min(max_supported_io_requests,
2296                             scic->task_context_entries);
2297
2298                 scic->remote_node_entries =
2299                         min(max_supported_devices, scic->remote_node_entries);
2300
2301                 /*
2302                  * Now that we have the correct hardware reported minimum values
2303                  * build the MDL for the controller.  Default to a performance
2304                  * configuration.
2305                  */
2306                 scic_controller_set_mode(scic, SCI_MODE_SPEED);
2307         }
2308
2309         /* Initialize hardware PCI Relaxed ordering in DMA engines */
2310         if (result == SCI_SUCCESS) {
2311                 u32 dma_configuration;
2312
2313                 /* Configure the payload DMA */
2314                 dma_configuration =
2315                         readl(&scic->scu_registers->sdma.pdma_configuration);
2316                 dma_configuration |=
2317                         SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
2318                 writel(dma_configuration,
2319                         &scic->scu_registers->sdma.pdma_configuration);
2320
2321                 /* Configure the control DMA */
2322                 dma_configuration =
2323                         readl(&scic->scu_registers->sdma.cdma_configuration);
2324                 dma_configuration |=
2325                         SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
2326                 writel(dma_configuration,
2327                         &scic->scu_registers->sdma.cdma_configuration);
2328         }
2329
2330         /*
2331          * Initialize the PHYs before the PORTs because the PHY registers
2332          * are accessed during the port initialization.
2333          */
2334         if (result == SCI_SUCCESS) {
2335                 /* Initialize the phys */
2336                 for (index = 0;
2337                      (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS);
2338                      index++) {
2339                         result = scic_sds_phy_initialize(
2340                                 &ihost->phys[index].sci,
2341                                 &scic->scu_registers->peg0.pe[index].tl,
2342                                 &scic->scu_registers->peg0.pe[index].ll);
2343                 }
2344         }
2345
2346         if (result == SCI_SUCCESS) {
2347                 /* Initialize the logical ports */
2348                 for (index = 0;
2349                      (index < scic->logical_port_entries) &&
2350                      (result == SCI_SUCCESS);
2351                      index++) {
2352                         result = scic_sds_port_initialize(
2353                                 &ihost->ports[index].sci,
2354                                 &scic->scu_registers->peg0.ptsg.port[index],
2355                                 &scic->scu_registers->peg0.ptsg.protocol_engine,
2356                                 &scic->scu_registers->peg0.viit[index]);
2357                 }
2358         }
2359
2360         if (result == SCI_SUCCESS)
2361                 result = scic_sds_port_configuration_agent_initialize(
2362                                 scic,
2363                                 &scic->port_agent);
2364
2365         /* Advance the controller state machine */
2366         if (result == SCI_SUCCESS)
2367                 state = SCI_BASE_CONTROLLER_STATE_INITIALIZED;
2368         else
2369                 state = SCI_BASE_CONTROLLER_STATE_FAILED;
2370         sci_base_state_machine_change_state(sm, state);
2371
2372         return result;
2373 }
2374
2375 static enum sci_status scic_user_parameters_set(
2376         struct scic_sds_controller *scic,
2377         union scic_user_parameters *scic_parms)
2378 {
2379         u32 state = scic->state_machine.current_state_id;
2380
2381         if (state == SCI_BASE_CONTROLLER_STATE_RESET ||
2382             state == SCI_BASE_CONTROLLER_STATE_INITIALIZING ||
2383             state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
2384                 u16 index;
2385
2386                 /*
2387                  * Validate the user parameters.  If they are not legal, then
2388                  * return a failure.
2389                  */
2390                 for (index = 0; index < SCI_MAX_PHYS; index++) {
2391                         struct sci_phy_user_params *user_phy;
2392
2393                         user_phy = &scic_parms->sds1.phys[index];
2394
2395                         if (!((user_phy->max_speed_generation <=
2396                                                 SCIC_SDS_PARM_MAX_SPEED) &&
2397                               (user_phy->max_speed_generation >
2398                                                 SCIC_SDS_PARM_NO_SPEED)))
2399                                 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
2400
2401                         if (user_phy->in_connection_align_insertion_frequency <
2402                                         3)
2403                                 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
2404
2405                         if ((user_phy->in_connection_align_insertion_frequency <
2406                                                 3) ||
2407                             (user_phy->align_insertion_frequency == 0) ||
2408                             (user_phy->
2409                                 notify_enable_spin_up_insertion_frequency ==
2410                                                 0))
2411                                 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
2412                 }
2413
2414                 if ((scic_parms->sds1.stp_inactivity_timeout == 0) ||
2415                     (scic_parms->sds1.ssp_inactivity_timeout == 0) ||
2416                     (scic_parms->sds1.stp_max_occupancy_timeout == 0) ||
2417                     (scic_parms->sds1.ssp_max_occupancy_timeout == 0) ||
2418                     (scic_parms->sds1.no_outbound_task_timeout == 0))
2419                         return SCI_FAILURE_INVALID_PARAMETER_VALUE;
2420
2421                 memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms));
2422
2423                 return SCI_SUCCESS;
2424         }
2425
2426         return SCI_FAILURE_INVALID_STATE;
2427 }
2428
2429 static int scic_controller_mem_init(struct scic_sds_controller *scic)
2430 {
2431         struct device *dev = scic_to_dev(scic);
2432         dma_addr_t dma_handle;
2433         enum sci_status result;
2434
2435         scic->completion_queue = dmam_alloc_coherent(dev,
2436                         scic->completion_queue_entries * sizeof(u32),
2437                         &dma_handle, GFP_KERNEL);
2438         if (!scic->completion_queue)
2439                 return -ENOMEM;
2440
2441         writel(lower_32_bits(dma_handle),
2442                 &scic->smu_registers->completion_queue_lower);
2443         writel(upper_32_bits(dma_handle),
2444                 &scic->smu_registers->completion_queue_upper);
2445
2446         scic->remote_node_context_table = dmam_alloc_coherent(dev,
2447                         scic->remote_node_entries *
2448                                 sizeof(union scu_remote_node_context),
2449                         &dma_handle, GFP_KERNEL);
2450         if (!scic->remote_node_context_table)
2451                 return -ENOMEM;
2452
2453         writel(lower_32_bits(dma_handle),
2454                 &scic->smu_registers->remote_node_context_lower);
2455         writel(upper_32_bits(dma_handle),
2456                 &scic->smu_registers->remote_node_context_upper);
2457
2458         scic->task_context_table = dmam_alloc_coherent(dev,
2459                         scic->task_context_entries *
2460                                 sizeof(struct scu_task_context),
2461                         &dma_handle, GFP_KERNEL);
2462         if (!scic->task_context_table)
2463                 return -ENOMEM;
2464
2465         writel(lower_32_bits(dma_handle),
2466                 &scic->smu_registers->host_task_table_lower);
2467         writel(upper_32_bits(dma_handle),
2468                 &scic->smu_registers->host_task_table_upper);
2469
2470         result = scic_sds_unsolicited_frame_control_construct(scic);
2471         if (result)
2472                 return result;
2473
2474         /*
2475          * Inform the silicon as to the location of the UF headers and
2476          * address table.
2477          */
2478         writel(lower_32_bits(scic->uf_control.headers.physical_address),
2479                 &scic->scu_registers->sdma.uf_header_base_address_lower);
2480         writel(upper_32_bits(scic->uf_control.headers.physical_address),
2481                 &scic->scu_registers->sdma.uf_header_base_address_upper);
2482
2483         writel(lower_32_bits(scic->uf_control.address_table.physical_address),
2484                 &scic->scu_registers->sdma.uf_address_table_lower);
2485         writel(upper_32_bits(scic->uf_control.address_table.physical_address),
2486                 &scic->scu_registers->sdma.uf_address_table_upper);
2487
2488         return 0;
2489 }
2490
2491 int isci_host_init(struct isci_host *isci_host)
2492 {
2493         int err = 0, i;
2494         enum sci_status status;
2495         union scic_oem_parameters oem;
2496         union scic_user_parameters scic_user_params;
2497         struct isci_pci_info *pci_info = to_pci_info(isci_host->pdev);
2498
2499         isci_timer_list_construct(isci_host);
2500
2501         spin_lock_init(&isci_host->state_lock);
2502         spin_lock_init(&isci_host->scic_lock);
2503         spin_lock_init(&isci_host->queue_lock);
2504         init_waitqueue_head(&isci_host->eventq);
2505
2506         isci_host_change_state(isci_host, isci_starting);
2507         isci_host->can_queue = ISCI_CAN_QUEUE_VAL;
2508
2509         status = scic_controller_construct(&isci_host->sci, scu_base(isci_host),
2510                                            smu_base(isci_host));
2511
2512         if (status != SCI_SUCCESS) {
2513                 dev_err(&isci_host->pdev->dev,
2514                         "%s: scic_controller_construct failed - status = %x\n",
2515                         __func__,
2516                         status);
2517                 return -ENODEV;
2518         }
2519
2520         isci_host->sas_ha.dev = &isci_host->pdev->dev;
2521         isci_host->sas_ha.lldd_ha = isci_host;
2522
2523         /*
2524          * grab initial values stored in the controller object for OEM and USER
2525          * parameters
2526          */
2527         isci_user_parameters_get(isci_host, &scic_user_params);
2528         status = scic_user_parameters_set(&isci_host->sci,
2529                                           &scic_user_params);
2530         if (status != SCI_SUCCESS) {
2531                 dev_warn(&isci_host->pdev->dev,
2532                          "%s: scic_user_parameters_set failed\n",
2533                          __func__);
2534                 return -ENODEV;
2535         }
2536
2537         scic_oem_parameters_get(&isci_host->sci, &oem);
2538
2539         /* grab any OEM parameters specified in orom */
2540         if (pci_info->orom) {
2541                 status = isci_parse_oem_parameters(&oem,
2542                                                    pci_info->orom,
2543                                                    isci_host->id);
2544                 if (status != SCI_SUCCESS) {
2545                         dev_warn(&isci_host->pdev->dev,
2546                                  "parsing firmware oem parameters failed\n");
2547                         return -EINVAL;
2548                 }
2549         }
2550
2551         status = scic_oem_parameters_set(&isci_host->sci, &oem);
2552         if (status != SCI_SUCCESS) {
2553                 dev_warn(&isci_host->pdev->dev,
2554                                 "%s: scic_oem_parameters_set failed\n",
2555                                 __func__);
2556                 return -ENODEV;
2557         }
2558
2559         tasklet_init(&isci_host->completion_tasklet,
2560                      isci_host_completion_routine, (unsigned long)isci_host);
2561
2562         INIT_LIST_HEAD(&isci_host->requests_to_complete);
2563         INIT_LIST_HEAD(&isci_host->requests_to_errorback);
2564
2565         spin_lock_irq(&isci_host->scic_lock);
2566         status = scic_controller_initialize(&isci_host->sci);
2567         spin_unlock_irq(&isci_host->scic_lock);
2568         if (status != SCI_SUCCESS) {
2569                 dev_warn(&isci_host->pdev->dev,
2570                          "%s: scic_controller_initialize failed -"
2571                          " status = 0x%x\n",
2572                          __func__, status);
2573                 return -ENODEV;
2574         }
2575
2576         err = scic_controller_mem_init(&isci_host->sci);
2577         if (err)
2578                 return err;
2579
2580         isci_host->dma_pool = dmam_pool_create(DRV_NAME, &isci_host->pdev->dev,
2581                                                sizeof(struct isci_request),
2582                                                SLAB_HWCACHE_ALIGN, 0);
2583
2584         if (!isci_host->dma_pool)
2585                 return -ENOMEM;
2586
2587         for (i = 0; i < SCI_MAX_PORTS; i++)
2588                 isci_port_init(&isci_host->ports[i], isci_host, i);
2589
2590         for (i = 0; i < SCI_MAX_PHYS; i++)
2591                 isci_phy_init(&isci_host->phys[i], isci_host, i);
2592
2593         for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
2594                 struct isci_remote_device *idev = &isci_host->devices[i];
2595
2596                 INIT_LIST_HEAD(&idev->reqs_in_process);
2597                 INIT_LIST_HEAD(&idev->node);
2598                 spin_lock_init(&idev->state_lock);
2599         }
2600
2601         return 0;
2602 }
2603
2604 void scic_sds_controller_link_up(struct scic_sds_controller *scic,
2605                 struct scic_sds_port *port, struct scic_sds_phy *phy)
2606 {
2607         switch (scic->state_machine.current_state_id) {
2608         case SCI_BASE_CONTROLLER_STATE_STARTING:
2609                 scic_sds_controller_phy_timer_stop(scic);
2610                 scic->port_agent.link_up_handler(scic, &scic->port_agent,
2611                                                  port, phy);
2612                 scic_sds_controller_start_next_phy(scic);
2613                 break;
2614         case SCI_BASE_CONTROLLER_STATE_READY:
2615                 scic->port_agent.link_up_handler(scic, &scic->port_agent,
2616                                                  port, phy);
2617                 break;
2618         default:
2619                 dev_dbg(scic_to_dev(scic),
2620                         "%s: SCIC Controller linkup event from phy %d in "
2621                         "unexpected state %d\n", __func__, phy->phy_index,
2622                         scic->state_machine.current_state_id);
2623         }
2624 }
2625
2626 void scic_sds_controller_link_down(struct scic_sds_controller *scic,
2627                 struct scic_sds_port *port, struct scic_sds_phy *phy)
2628 {
2629         switch (scic->state_machine.current_state_id) {
2630         case SCI_BASE_CONTROLLER_STATE_STARTING:
2631         case SCI_BASE_CONTROLLER_STATE_READY:
2632                 scic->port_agent.link_down_handler(scic, &scic->port_agent,
2633                                                    port, phy);
2634                 break;
2635         default:
2636                 dev_dbg(scic_to_dev(scic),
2637                         "%s: SCIC Controller linkdown event from phy %d in "
2638                         "unexpected state %d\n",
2639                         __func__,
2640                         phy->phy_index,
2641                         scic->state_machine.current_state_id);
2642         }
2643 }
2644
2645 /**
2646  * This is a helper method to determine if any remote devices on this
2647  * controller are still in the stopping state.
2648  *
2649  */
2650 static bool scic_sds_controller_has_remote_devices_stopping(
2651         struct scic_sds_controller *controller)
2652 {
2653         u32 index;
2654
2655         for (index = 0; index < controller->remote_node_entries; index++) {
2656                 if ((controller->device_table[index] != NULL) &&
2657                    (controller->device_table[index]->state_machine.current_state_id
2658                     == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING))
2659                         return true;
2660         }
2661
2662         return false;
2663 }
2664
2665 /**
2666  * This method is called by the remote device to inform the controller
2667  * object that the remote device has stopped.
2668  */
2669 void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic,
2670                                                struct scic_sds_remote_device *sci_dev)
2671 {
2672         if (scic->state_machine.current_state_id !=
2673             SCI_BASE_CONTROLLER_STATE_STOPPING) {
2674                 dev_dbg(scic_to_dev(scic),
2675                         "SCIC Controller 0x%p remote device stopped event "
2676                         "from device 0x%p in unexpected state %d\n",
2677                         scic, sci_dev,
2678                         scic->state_machine.current_state_id);
2679                 return;
2680         }
2681
2682         if (!scic_sds_controller_has_remote_devices_stopping(scic)) {
2683                 sci_base_state_machine_change_state(&scic->state_machine,
2684                                 SCI_BASE_CONTROLLER_STATE_STOPPED);
2685         }
2686 }
2687
2688 /**
2689  * This method will write to the SCU PCP register the request value. The method
2690  *    is used to suspend/resume ports, devices, and phys.
2691  * @scic:
2692  *
2693  *
2694  */
2695 void scic_sds_controller_post_request(
2696         struct scic_sds_controller *scic,
2697         u32 request)
2698 {
2699         dev_dbg(scic_to_dev(scic),
2700                 "%s: SCIC Controller 0x%p post request 0x%08x\n",
2701                 __func__,
2702                 scic,
2703                 request);
2704
2705         writel(request, &scic->smu_registers->post_context_port);
2706 }
2707
2708 /**
2709  * This method will copy the soft copy of the task context into the physical
2710  *    memory accessible by the controller.
2711  * @scic: This parameter specifies the controller for which to copy
2712  *    the task context.
2713  * @sci_req: This parameter specifies the request for which the task
2714  *    context is being copied.
2715  *
2716  * After this call is made the SCIC_SDS_IO_REQUEST object will always point to
2717  * the physical memory version of the task context. Thus, all subsequent
2718  * updates to the task context are performed in the TC table (i.e. DMAable
2719  * memory). none
2720  */
2721 void scic_sds_controller_copy_task_context(
2722         struct scic_sds_controller *scic,
2723         struct scic_sds_request *sci_req)
2724 {
2725         struct scu_task_context *task_context_buffer;
2726
2727         task_context_buffer = scic_sds_controller_get_task_context_buffer(
2728                 scic, sci_req->io_tag);
2729
2730         memcpy(task_context_buffer,
2731                sci_req->task_context_buffer,
2732                offsetof(struct scu_task_context, sgl_snapshot_ac));
2733
2734         /*
2735          * Now that the soft copy of the TC has been copied into the TC
2736          * table accessible by the silicon.  Thus, any further changes to
2737          * the TC (e.g. TC termination) occur in the appropriate location. */
2738         sci_req->task_context_buffer = task_context_buffer;
2739 }
2740
2741 /**
2742  * This method returns the task context buffer for the given io tag.
2743  * @scic:
2744  * @io_tag:
2745  *
2746  * struct scu_task_context*
2747  */
2748 struct scu_task_context *scic_sds_controller_get_task_context_buffer(
2749         struct scic_sds_controller *scic,
2750         u16 io_tag
2751         ) {
2752         u16 task_index = scic_sds_io_tag_get_index(io_tag);
2753
2754         if (task_index < scic->task_context_entries) {
2755                 return &scic->task_context_table[task_index];
2756         }
2757
2758         return NULL;
2759 }
2760
2761 struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic,
2762                                              u16 io_tag)
2763 {
2764         u16 task_index;
2765         u16 task_sequence;
2766
2767         task_index = scic_sds_io_tag_get_index(io_tag);
2768
2769         if (task_index  < scic->task_context_entries) {
2770                 if (scic->io_request_table[task_index] != NULL) {
2771                         task_sequence = scic_sds_io_tag_get_sequence(io_tag);
2772
2773                         if (task_sequence == scic->io_request_sequence[task_index]) {
2774                                 return scic->io_request_table[task_index];
2775                         }
2776                 }
2777         }
2778
2779         return NULL;
2780 }
2781
2782 /**
2783  * This method allocates remote node index and the reserves the remote node
2784  *    context space for use. This method can fail if there are no more remote
2785  *    node index available.
2786  * @scic: This is the controller object which contains the set of
2787  *    free remote node ids
2788  * @sci_dev: This is the device object which is requesting the a remote node
2789  *    id
2790  * @node_id: This is the remote node id that is assinged to the device if one
2791  *    is available
2792  *
2793  * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote
2794  * node index available.
2795  */
2796 enum sci_status scic_sds_controller_allocate_remote_node_context(
2797         struct scic_sds_controller *scic,
2798         struct scic_sds_remote_device *sci_dev,
2799         u16 *node_id)
2800 {
2801         u16 node_index;
2802         u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev);
2803
2804         node_index = scic_sds_remote_node_table_allocate_remote_node(
2805                 &scic->available_remote_nodes, remote_node_count
2806                 );
2807
2808         if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
2809                 scic->device_table[node_index] = sci_dev;
2810
2811                 *node_id = node_index;
2812
2813                 return SCI_SUCCESS;
2814         }
2815
2816         return SCI_FAILURE_INSUFFICIENT_RESOURCES;
2817 }
2818
2819 /**
2820  * This method frees the remote node index back to the available pool.  Once
2821  *    this is done the remote node context buffer is no longer valid and can
2822  *    not be used.
2823  * @scic:
2824  * @sci_dev:
2825  * @node_id:
2826  *
2827  */
2828 void scic_sds_controller_free_remote_node_context(
2829         struct scic_sds_controller *scic,
2830         struct scic_sds_remote_device *sci_dev,
2831         u16 node_id)
2832 {
2833         u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev);
2834
2835         if (scic->device_table[node_id] == sci_dev) {
2836                 scic->device_table[node_id] = NULL;
2837
2838                 scic_sds_remote_node_table_release_remote_node_index(
2839                         &scic->available_remote_nodes, remote_node_count, node_id
2840                         );
2841         }
2842 }
2843
2844 /**
2845  * This method returns the union scu_remote_node_context for the specified remote
2846  *    node id.
2847  * @scic:
2848  * @node_id:
2849  *
2850  * union scu_remote_node_context*
2851  */
2852 union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer(
2853         struct scic_sds_controller *scic,
2854         u16 node_id
2855         ) {
2856         if (
2857                 (node_id < scic->remote_node_entries)
2858                 && (scic->device_table[node_id] != NULL)
2859                 ) {
2860                 return &scic->remote_node_context_table[node_id];
2861         }
2862
2863         return NULL;
2864 }
2865
2866 /**
2867  *
2868  * @resposne_buffer: This is the buffer into which the D2H register FIS will be
2869  *    constructed.
2870  * @frame_header: This is the frame header returned by the hardware.
2871  * @frame_buffer: This is the frame buffer returned by the hardware.
2872  *
2873  * This method will combind the frame header and frame buffer to create a SATA
2874  * D2H register FIS none
2875  */
2876 void scic_sds_controller_copy_sata_response(
2877         void *response_buffer,
2878         void *frame_header,
2879         void *frame_buffer)
2880 {
2881         memcpy(response_buffer, frame_header, sizeof(u32));
2882
2883         memcpy(response_buffer + sizeof(u32),
2884                frame_buffer,
2885                sizeof(struct dev_to_host_fis) - sizeof(u32));
2886 }
2887
2888 /**
2889  * This method releases the frame once this is done the frame is available for
2890  *    re-use by the hardware.  The data contained in the frame header and frame
2891  *    buffer is no longer valid. The UF queue get pointer is only updated if UF
2892  *    control indicates this is appropriate.
2893  * @scic:
2894  * @frame_index:
2895  *
2896  */
2897 void scic_sds_controller_release_frame(
2898         struct scic_sds_controller *scic,
2899         u32 frame_index)
2900 {
2901         if (scic_sds_unsolicited_frame_control_release_frame(
2902                     &scic->uf_control, frame_index) == true)
2903                 writel(scic->uf_control.get,
2904                         &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
2905 }
2906
2907 /**
2908  * scic_controller_start_io() - This method is called by the SCI user to
2909  *    send/start an IO request. If the method invocation is successful, then
2910  *    the IO request has been queued to the hardware for processing.
2911  * @controller: the handle to the controller object for which to start an IO
2912  *    request.
2913  * @remote_device: the handle to the remote device object for which to start an
2914  *    IO request.
2915  * @io_request: the handle to the io request object to start.
2916  * @io_tag: This parameter specifies a previously allocated IO tag that the
2917  *    user desires to be utilized for this request. This parameter is optional.
2918  *     The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value
2919  *    for this parameter.
2920  *
2921  * - IO tags are a protected resource.  It is incumbent upon the SCI Core user
2922  * to ensure that each of the methods that may allocate or free available IO
2923  * tags are handled in a mutually exclusive manner.  This method is one of said
2924  * methods requiring proper critical code section protection (e.g. semaphore,
2925  * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags.  As a
2926  * result, it is expected the user will have set the NCQ tag field in the host
2927  * to device register FIS prior to calling this method.  There is also a
2928  * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking
2929  * the scic_controller_start_io() method. scic_controller_allocate_tag() for
2930  * more information on allocating a tag. Indicate if the controller
2931  * successfully started the IO request. SCI_SUCCESS if the IO request was
2932  * successfully started. Determine the failure situations and return values.
2933  */
2934 enum sci_status scic_controller_start_io(
2935         struct scic_sds_controller *scic,
2936         struct scic_sds_remote_device *rdev,
2937         struct scic_sds_request *req,
2938         u16 io_tag)
2939 {
2940         enum sci_status status;
2941
2942         if (scic->state_machine.current_state_id !=
2943             SCI_BASE_CONTROLLER_STATE_READY) {
2944                 dev_warn(scic_to_dev(scic), "invalid state to start I/O");
2945                 return SCI_FAILURE_INVALID_STATE;
2946         }
2947
2948         status = scic_sds_remote_device_start_io(scic, rdev, req);
2949         if (status != SCI_SUCCESS)
2950                 return status;
2951
2952         scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
2953         scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req));
2954         return SCI_SUCCESS;
2955 }
2956
2957 /**
2958  * scic_controller_terminate_request() - This method is called by the SCI Core
2959  *    user to terminate an ongoing (i.e. started) core IO request.  This does
2960  *    not abort the IO request at the target, but rather removes the IO request
2961  *    from the host controller.
2962  * @controller: the handle to the controller object for which to terminate a
2963  *    request.
2964  * @remote_device: the handle to the remote device object for which to
2965  *    terminate a request.
2966  * @request: the handle to the io or task management request object to
2967  *    terminate.
2968  *
2969  * Indicate if the controller successfully began the terminate process for the
2970  * IO request. SCI_SUCCESS if the terminate process was successfully started
2971  * for the request. Determine the failure situations and return values.
2972  */
2973 enum sci_status scic_controller_terminate_request(
2974         struct scic_sds_controller *scic,
2975         struct scic_sds_remote_device *rdev,
2976         struct scic_sds_request *req)
2977 {
2978         enum sci_status status;
2979
2980         if (scic->state_machine.current_state_id !=
2981             SCI_BASE_CONTROLLER_STATE_READY) {
2982                 dev_warn(scic_to_dev(scic),
2983                          "invalid state to terminate request\n");
2984                 return SCI_FAILURE_INVALID_STATE;
2985         }
2986
2987         status = scic_sds_io_request_terminate(req);
2988         if (status != SCI_SUCCESS)
2989                 return status;
2990
2991         /*
2992          * Utilize the original post context command and or in the POST_TC_ABORT
2993          * request sub-type.
2994          */
2995         scic_sds_controller_post_request(scic,
2996                 scic_sds_request_get_post_context(req) |
2997                 SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT);
2998         return SCI_SUCCESS;
2999 }
3000
3001 /**
3002  * scic_controller_complete_io() - This method will perform core specific
3003  *    completion operations for an IO request.  After this method is invoked,
3004  *    the user should consider the IO request as invalid until it is properly
3005  *    reused (i.e. re-constructed).
3006  * @controller: The handle to the controller object for which to complete the
3007  *    IO request.
3008  * @remote_device: The handle to the remote device object for which to complete
3009  *    the IO request.
3010  * @io_request: the handle to the io request object to complete.
3011  *
3012  * - IO tags are a protected resource.  It is incumbent upon the SCI Core user
3013  * to ensure that each of the methods that may allocate or free available IO
3014  * tags are handled in a mutually exclusive manner.  This method is one of said
3015  * methods requiring proper critical code section protection (e.g. semaphore,
3016  * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI
3017  * Core user, using the scic_controller_allocate_io_tag() method, then it is
3018  * the responsibility of the caller to invoke the scic_controller_free_io_tag()
3019  * method to free the tag (i.e. this method will not free the IO tag). Indicate
3020  * if the controller successfully completed the IO request. SCI_SUCCESS if the
3021  * completion process was successful.
3022  */
3023 enum sci_status scic_controller_complete_io(
3024         struct scic_sds_controller *scic,
3025         struct scic_sds_remote_device *rdev,
3026         struct scic_sds_request *request)
3027 {
3028         enum sci_status status;
3029         u16 index;
3030
3031         switch (scic->state_machine.current_state_id) {
3032         case SCI_BASE_CONTROLLER_STATE_STOPPING:
3033                 /* XXX: Implement this function */
3034                 return SCI_FAILURE;
3035         case SCI_BASE_CONTROLLER_STATE_READY:
3036                 status = scic_sds_remote_device_complete_io(scic, rdev, request);
3037                 if (status != SCI_SUCCESS)
3038                         return status;
3039
3040                 index = scic_sds_io_tag_get_index(request->io_tag);
3041                 scic->io_request_table[index] = NULL;
3042                 return SCI_SUCCESS;
3043         default:
3044                 dev_warn(scic_to_dev(scic), "invalid state to complete I/O");
3045                 return SCI_FAILURE_INVALID_STATE;
3046         }
3047
3048 }
3049
3050 enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req)
3051 {
3052         struct scic_sds_controller *scic = sci_req->owning_controller;
3053
3054         if (scic->state_machine.current_state_id !=
3055             SCI_BASE_CONTROLLER_STATE_READY) {
3056                 dev_warn(scic_to_dev(scic), "invalid state to continue I/O");
3057                 return SCI_FAILURE_INVALID_STATE;
3058         }
3059
3060         scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req;
3061         scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req));
3062         return SCI_SUCCESS;
3063 }
3064
3065 /**
3066  * scic_controller_start_task() - This method is called by the SCIC user to
3067  *    send/start a framework task management request.
3068  * @controller: the handle to the controller object for which to start the task
3069  *    management request.
3070  * @remote_device: the handle to the remote device object for which to start
3071  *    the task management request.
3072  * @task_request: the handle to the task request object to start.
3073  * @io_tag: This parameter specifies a previously allocated IO tag that the
3074  *    user desires to be utilized for this request.  Note this not the io_tag
3075  *    of the request being managed.  It is to be utilized for the task request
3076  *    itself. This parameter is optional.  The user is allowed to supply
3077  *    SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter.
3078  *
3079  * - IO tags are a protected resource.  It is incumbent upon the SCI Core user
3080  * to ensure that each of the methods that may allocate or free available IO
3081  * tags are handled in a mutually exclusive manner.  This method is one of said
3082  * methods requiring proper critical code section protection (e.g. semaphore,
3083  * spin-lock, etc.). - The user must synchronize this task with completion
3084  * queue processing.  If they are not synchronized then it is possible for the
3085  * io requests that are being managed by the task request can complete before
3086  * starting the task request. scic_controller_allocate_tag() for more
3087  * information on allocating a tag. Indicate if the controller successfully
3088  * started the IO request. SCI_TASK_SUCCESS if the task request was
3089  * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is
3090  * returned if there is/are task(s) outstanding that require termination or
3091  * completion before this request can succeed.
3092  */
3093 enum sci_task_status scic_controller_start_task(
3094         struct scic_sds_controller *scic,
3095         struct scic_sds_remote_device *rdev,
3096         struct scic_sds_request *req,
3097         u16 task_tag)
3098 {
3099         enum sci_status status;
3100
3101         if (scic->state_machine.current_state_id !=
3102             SCI_BASE_CONTROLLER_STATE_READY) {
3103                 dev_warn(scic_to_dev(scic),
3104                          "%s: SCIC Controller starting task from invalid "
3105                          "state\n",
3106                          __func__);
3107                 return SCI_TASK_FAILURE_INVALID_STATE;
3108         }
3109
3110         status = scic_sds_remote_device_start_task(scic, rdev, req);
3111         switch (status) {
3112         case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS:
3113                 scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
3114
3115                 /*
3116                  * We will let framework know this task request started successfully,
3117                  * although core is still woring on starting the request (to post tc when
3118                  * RNC is resumed.)
3119                  */
3120                 return SCI_SUCCESS;
3121         case SCI_SUCCESS:
3122                 scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
3123
3124                 scic_sds_controller_post_request(scic,
3125                         scic_sds_request_get_post_context(req));
3126                 break;
3127         default:
3128                 break;
3129         }
3130
3131         return status;
3132 }
3133
3134 /**
3135  * scic_controller_allocate_io_tag() - This method will allocate a tag from the
3136  *    pool of free IO tags. Direct allocation of IO tags by the SCI Core user
3137  *    is optional. The scic_controller_start_io() method will allocate an IO
3138  *    tag if this method is not utilized and the tag is not supplied to the IO
3139  *    construct routine.  Direct allocation of IO tags may provide additional
3140  *    performance improvements in environments capable of supporting this usage
3141  *    model.  Additionally, direct allocation of IO tags also provides
3142  *    additional flexibility to the SCI Core user.  Specifically, the user may
3143  *    retain IO tags across the lives of multiple IO requests.
3144  * @controller: the handle to the controller object for which to allocate the
3145  *    tag.
3146  *
3147  * IO tags are a protected resource.  It is incumbent upon the SCI Core user to
3148  * ensure that each of the methods that may allocate or free available IO tags
3149  * are handled in a mutually exclusive manner.  This method is one of said
3150  * methods requiring proper critical code section protection (e.g. semaphore,
3151  * spin-lock, etc.). An unsigned integer representing an available IO tag.
3152  * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no
3153  * currently available tags to be allocated. All return other values indicate a
3154  * legitimate tag.
3155  */
3156 u16 scic_controller_allocate_io_tag(
3157         struct scic_sds_controller *scic)
3158 {
3159         u16 task_context;
3160         u16 sequence_count;
3161
3162         if (!sci_pool_empty(scic->tci_pool)) {
3163                 sci_pool_get(scic->tci_pool, task_context);
3164
3165                 sequence_count = scic->io_request_sequence[task_context];
3166
3167                 return scic_sds_io_tag_construct(sequence_count, task_context);
3168         }
3169
3170         return SCI_CONTROLLER_INVALID_IO_TAG;
3171 }
3172
3173 /**
3174  * scic_controller_free_io_tag() - This method will free an IO tag to the pool
3175  *    of free IO tags. This method provides the SCI Core user more flexibility
3176  *    with regards to IO tags.  The user may desire to keep an IO tag after an
3177  *    IO request has completed, because they plan on re-using the tag for a
3178  *    subsequent IO request.  This method is only legal if the tag was
3179  *    allocated via scic_controller_allocate_io_tag().
3180  * @controller: This parameter specifies the handle to the controller object
3181  *    for which to free/return the tag.
3182  * @io_tag: This parameter represents the tag to be freed to the pool of
3183  *    available tags.
3184  *
3185  * - IO tags are a protected resource.  It is incumbent upon the SCI Core user
3186  * to ensure that each of the methods that may allocate or free available IO
3187  * tags are handled in a mutually exclusive manner.  This method is one of said
3188  * methods requiring proper critical code section protection (e.g. semaphore,
3189  * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI
3190  * Core user, using the scic_controller_allocate_io_tag() method, then it is
3191  * the responsibility of the caller to invoke this method to free the tag. This
3192  * method returns an indication of whether the tag was successfully put back
3193  * (freed) to the pool of available tags. SCI_SUCCESS This return value
3194  * indicates the tag was successfully placed into the pool of available IO
3195  * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag
3196  * is not a valid IO tag value.
3197  */
3198 enum sci_status scic_controller_free_io_tag(
3199         struct scic_sds_controller *scic,
3200         u16 io_tag)
3201 {
3202         u16 sequence;
3203         u16 index;
3204
3205         BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG);
3206
3207         sequence = scic_sds_io_tag_get_sequence(io_tag);
3208         index    = scic_sds_io_tag_get_index(io_tag);
3209
3210         if (!sci_pool_full(scic->tci_pool)) {
3211                 if (sequence == scic->io_request_sequence[index]) {
3212                         scic_sds_io_sequence_increment(
3213                                 scic->io_request_sequence[index]);
3214
3215                         sci_pool_put(scic->tci_pool, index);
3216
3217                         return SCI_SUCCESS;
3218                 }
3219         }
3220
3221         return SCI_FAILURE_INVALID_IO_TAG;
3222 }
3223
3224