]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/scsi/isci/port.h
isci: rename / clean up scic_sds_stp_request
[karo-tx-linux.git] / drivers / scsi / isci / port.h
1 /*
2  * This file is provided under a dual BSD/GPLv2 license.  When using or
3  * redistributing this file, you may do so under either license.
4  *
5  * GPL LICENSE SUMMARY
6  *
7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of version 2 of the GNU General Public License as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * BSD LICENSE
25  *
26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27  * All rights reserved.
28  *
29  * Redistribution and use in source and binary forms, with or without
30  * modification, are permitted provided that the following conditions
31  * are met:
32  *
33  *   * Redistributions of source code must retain the above copyright
34  *     notice, this list of conditions and the following disclaimer.
35  *   * Redistributions in binary form must reproduce the above copyright
36  *     notice, this list of conditions and the following disclaimer in
37  *     the documentation and/or other materials provided with the
38  *     distribution.
39  *   * Neither the name of Intel Corporation nor the names of its
40  *     contributors may be used to endorse or promote products derived
41  *     from this software without specific prior written permission.
42  *
43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54  */
55
56 #ifndef _ISCI_PORT_H_
57 #define _ISCI_PORT_H_
58
59 #include <scsi/libsas.h>
60 #include "isci.h"
61 #include "sas.h"
62 #include "phy.h"
63
64 #define SCIC_SDS_DUMMY_PORT   0xFF
65
66 struct isci_phy;
67 struct isci_host;
68
69 enum isci_status {
70         isci_freed        = 0x00,
71         isci_starting     = 0x01,
72         isci_ready        = 0x02,
73         isci_ready_for_io = 0x03,
74         isci_stopping     = 0x04,
75         isci_stopped      = 0x05,
76 };
77
78 /**
79  * struct scic_sds_port
80  *
81  * The core port object provides the the abstraction for an SCU port.
82  */
83 struct scic_sds_port {
84         /**
85          * This field contains the information for the base port state machine.
86          */
87         struct sci_base_state_machine sm;
88
89         bool ready_exit;
90
91         /**
92          * This field is the port index that is reported to the SCI USER.
93          * This allows the actual hardware physical port to change without
94          * the SCI USER getting a different answer for the get port index.
95          */
96         u8 logical_port_index;
97
98         /**
99          * This field is the port index used to program the SCU hardware.
100          */
101         u8 physical_port_index;
102
103         /**
104          * This field contains the active phy mask for the port.
105          * This mask is used in conjunction with the phy state to determine
106          * which phy to select for some port operations.
107          */
108         u8 active_phy_mask;
109
110         u16 reserved_rni;
111         u16 reserved_tag;
112
113         /**
114          * This field contains the count of the io requests started on this port
115          * object.  It is used to control controller shutdown.
116          */
117         u32 started_request_count;
118
119         /**
120          * This field contains the number of devices assigned to this port.
121          * It is used to control port start requests.
122          */
123         u32 assigned_device_count;
124
125         /**
126          * This field contains the reason for the port not going ready.  It is
127          * assigned in the state handlers and used in the state transition.
128          */
129         u32 not_ready_reason;
130
131         /**
132          * This field is the table of phys assigned to the port.
133          */
134         struct scic_sds_phy *phy_table[SCI_MAX_PHYS];
135
136         /**
137          * This field is a pointer back to the controller that owns this
138          * port object.
139          */
140         struct scic_sds_controller *owning_controller;
141
142         /* timer used for port start/stop operations */
143         struct sci_timer        timer;
144
145         /**
146          * This field is the pointer to the port task scheduler registers
147          * for the SCU hardware.
148          */
149         struct scu_port_task_scheduler_registers __iomem
150                 *port_task_scheduler_registers;
151
152         /**
153          * This field is identical for all port objects and points to the port
154          * task scheduler group PE configuration registers.
155          * It is used to assign PEs to a port.
156          */
157         u32 __iomem *port_pe_configuration_register;
158
159         /**
160          * This field is the VIIT register space for ths port object.
161          */
162         struct scu_viit_entry __iomem *viit_registers;
163 };
164
165
166
167 /**
168  * struct isci_port - This class represents the port object used to internally
169  *    represent libsas port objects. It also keeps a list of remote device
170  *    objects.
171  *
172  *
173  */
174 struct isci_port {
175         enum isci_status status;
176         #define IPORT_BCN_BLOCKED 0
177         #define IPORT_BCN_PENDING 1
178         unsigned long flags;
179         atomic_t event;
180         struct isci_host *isci_host;
181         struct asd_sas_port sas_port;
182         struct list_head remote_dev_list;
183         spinlock_t state_lock;
184         struct list_head domain_dev_list;
185         struct completion start_complete;
186         struct completion hard_reset_complete;
187         enum sci_status hard_reset_status;
188         struct scic_sds_port sci;
189 };
190
191 static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port)
192 {
193         struct isci_port *iport = container_of(sci_port, typeof(*iport), sci);
194
195         return iport;
196 }
197
198 enum scic_port_not_ready_reason_code {
199         SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
200         SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
201         SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
202         SCIC_PORT_NOT_READY_RECONFIGURING,
203
204         SCIC_PORT_NOT_READY_REASON_CODE_MAX
205 };
206
207 struct scic_port_end_point_properties {
208         struct sci_sas_address sas_address;
209         struct scic_phy_proto protocols;
210 };
211
212 struct scic_port_properties {
213         u32 index;
214         struct scic_port_end_point_properties local;
215         struct scic_port_end_point_properties remote;
216         u32 phy_mask;
217 };
218
219 /**
220  * enum scic_sds_port_states - This enumeration depicts all the states for the
221  *    common port state machine.
222  *
223  *
224  */
225 enum scic_sds_port_states {
226         /**
227          * This state indicates that the port has successfully been stopped.
228          * In this state no new IO operations are permitted.
229          * This state is entered from the STOPPING state.
230          */
231         SCI_PORT_STOPPED,
232
233         /**
234          * This state indicates that the port is in the process of stopping.
235          * In this state no new IO operations are permitted, but existing IO
236          * operations are allowed to complete.
237          * This state is entered from the READY state.
238          */
239         SCI_PORT_STOPPING,
240
241         /**
242          * This state indicates the port is now ready.  Thus, the user is
243          * able to perform IO operations on this port.
244          * This state is entered from the STARTING state.
245          */
246         SCI_PORT_READY,
247
248         /**
249          * The substate where the port is started and ready but has no
250          * active phys.
251          */
252         SCI_PORT_SUB_WAITING,
253
254         /**
255          * The substate where the port is started and ready and there is
256          * at least one phy operational.
257          */
258         SCI_PORT_SUB_OPERATIONAL,
259
260         /**
261          * The substate where the port is started and there was an
262          * add/remove phy event.  This state is only used in Automatic
263          * Port Configuration Mode (APC)
264          */
265         SCI_PORT_SUB_CONFIGURING,
266
267         /**
268          * This state indicates the port is in the process of performing a hard
269          * reset.  Thus, the user is unable to perform IO operations on this
270          * port.
271          * This state is entered from the READY state.
272          */
273         SCI_PORT_RESETTING,
274
275         /**
276          * This state indicates the port has failed a reset request.  This state
277          * is entered when a port reset request times out.
278          * This state is entered from the RESETTING state.
279          */
280         SCI_PORT_FAILED,
281
282
283 };
284
285 /**
286  * scic_sds_port_get_controller() -
287  *
288  * Helper macro to get the owning controller of this port
289  */
290 #define scic_sds_port_get_controller(this_port) \
291         ((this_port)->owning_controller)
292
293 /**
294  * scic_sds_port_get_index() -
295  *
296  * This macro returns the physical port index for this port object
297  */
298 #define scic_sds_port_get_index(this_port) \
299         ((this_port)->physical_port_index)
300
301
302 static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port)
303 {
304         if (WARN_ONCE(sci_port->started_request_count == 0,
305                        "%s: tried to decrement started_request_count past 0!?",
306                         __func__))
307                 /* pass */;
308         else
309                 sci_port->started_request_count--;
310 }
311
312 #define scic_sds_port_active_phy(port, phy) \
313         (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
314
315 void scic_sds_port_construct(
316         struct scic_sds_port *sci_port,
317         u8 port_index,
318         struct scic_sds_controller *scic);
319
320 enum sci_status scic_sds_port_initialize(
321         struct scic_sds_port *sci_port,
322         void __iomem *port_task_scheduler_registers,
323         void __iomem *port_configuration_regsiter,
324         void __iomem *viit_registers);
325
326 enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port);
327 enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port);
328
329 enum sci_status scic_sds_port_add_phy(
330         struct scic_sds_port *sci_port,
331         struct scic_sds_phy *sci_phy);
332
333 enum sci_status scic_sds_port_remove_phy(
334         struct scic_sds_port *sci_port,
335         struct scic_sds_phy *sci_phy);
336
337 void scic_sds_port_setup_transports(
338         struct scic_sds_port *sci_port,
339         u32 device_id);
340
341 void isci_port_bcn_enable(struct isci_host *, struct isci_port *);
342
343 void scic_sds_port_deactivate_phy(
344         struct scic_sds_port *sci_port,
345         struct scic_sds_phy *sci_phy,
346         bool do_notify_user);
347
348 bool scic_sds_port_link_detected(
349         struct scic_sds_port *sci_port,
350         struct scic_sds_phy *sci_phy);
351
352 enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port,
353                                       struct scic_sds_phy *sci_phy);
354 enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port,
355                                         struct scic_sds_phy *sci_phy);
356
357 struct scic_sds_request;
358 struct scic_sds_remote_device;
359 enum sci_status scic_sds_port_start_io(
360         struct scic_sds_port *sci_port,
361         struct scic_sds_remote_device *sci_dev,
362         struct scic_sds_request *sci_req);
363
364 enum sci_status scic_sds_port_complete_io(
365         struct scic_sds_port *sci_port,
366         struct scic_sds_remote_device *sci_dev,
367         struct scic_sds_request *sci_req);
368
369 enum sas_linkrate scic_sds_port_get_max_allowed_speed(
370         struct scic_sds_port *sci_port);
371
372 void scic_sds_port_broadcast_change_received(
373         struct scic_sds_port *sci_port,
374         struct scic_sds_phy *sci_phy);
375
376 bool scic_sds_port_is_valid_phy_assignment(
377         struct scic_sds_port *sci_port,
378         u32 phy_index);
379
380 void scic_sds_port_get_sas_address(
381         struct scic_sds_port *sci_port,
382         struct sci_sas_address *sas_address);
383
384 void scic_sds_port_get_attached_sas_address(
385         struct scic_sds_port *sci_port,
386         struct sci_sas_address *sas_address);
387
388 enum isci_status isci_port_get_state(
389         struct isci_port *isci_port);
390
391 void isci_port_formed(struct asd_sas_phy *);
392 void isci_port_deformed(struct asd_sas_phy *);
393
394 void isci_port_init(
395         struct isci_port *port,
396         struct isci_host *host,
397         int index);
398
399 int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
400                                  struct isci_phy *iphy);
401 #endif /* !defined(_ISCI_PORT_H_) */