drivers/spi/spi-sun6i.c

   1 /*
   2  * Copyright (C) 2012 - 2014 Allwinner Tech
   3  * Pan Nan <pannan@allwinnertech.com>
   4  *
   5  * Copyright (C) 2014 Maxime Ripard
   6  * Maxime Ripard <maxime.ripard@free-electrons.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/device.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/module.h>
  20 #include <linux/of_device.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/pm_runtime.h>
  23 #include <linux/reset.h>
  24
  25 #include <linux/spi/spi.h>
  26
  27 #define SUN6I_FIFO_DEPTH                128
  28 #define SUN8I_FIFO_DEPTH                64
  29
  30 #define SUN6I_GBL_CTL_REG               0x04
  31 #define SUN6I_GBL_CTL_BUS_ENABLE                BIT(0)
  32 #define SUN6I_GBL_CTL_MASTER                    BIT(1)
  33 #define SUN6I_GBL_CTL_TP                        BIT(7)
  34 #define SUN6I_GBL_CTL_RST                       BIT(31)
  35
  36 #define SUN6I_TFR_CTL_REG               0x08
  37 #define SUN6I_TFR_CTL_CPHA                      BIT(0)
  38 #define SUN6I_TFR_CTL_CPOL                      BIT(1)
  39 #define SUN6I_TFR_CTL_SPOL                      BIT(2)
  40 #define SUN6I_TFR_CTL_CS_MASK                   0x30
  41 #define SUN6I_TFR_CTL_CS(cs)                    (((cs) << 4) & SUN6I_TFR_CTL_CS_MASK)
  42 #define SUN6I_TFR_CTL_CS_MANUAL                 BIT(6)
  43 #define SUN6I_TFR_CTL_CS_LEVEL                  BIT(7)
  44 #define SUN6I_TFR_CTL_DHB                       BIT(8)
  45 #define SUN6I_TFR_CTL_FBS                       BIT(12)
  46 #define SUN6I_TFR_CTL_XCH                       BIT(31)
  47
  48 #define SUN6I_INT_CTL_REG               0x10
  49 #define SUN6I_INT_CTL_RF_OVF                    BIT(8)
  50 #define SUN6I_INT_CTL_TC                        BIT(12)
  51
  52 #define SUN6I_INT_STA_REG               0x14
  53
  54 #define SUN6I_FIFO_CTL_REG              0x18
  55 #define SUN6I_FIFO_CTL_RF_RST                   BIT(15)
  56 #define SUN6I_FIFO_CTL_TF_RST                   BIT(31)
  57
  58 #define SUN6I_FIFO_STA_REG              0x1c
  59 #define SUN6I_FIFO_STA_RF_CNT_MASK              0x7f
  60 #define SUN6I_FIFO_STA_RF_CNT_BITS              0
  61 #define SUN6I_FIFO_STA_TF_CNT_MASK              0x7f
  62 #define SUN6I_FIFO_STA_TF_CNT_BITS              16
  63
  64 #define SUN6I_CLK_CTL_REG               0x24
  65 #define SUN6I_CLK_CTL_CDR2_MASK                 0xff
  66 #define SUN6I_CLK_CTL_CDR2(div)                 (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)
  67 #define SUN6I_CLK_CTL_CDR1_MASK                 0xf
  68 #define SUN6I_CLK_CTL_CDR1(div)                 (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
  69 #define SUN6I_CLK_CTL_DRS                       BIT(12)
  70
  71 #define SUN6I_BURST_CNT_REG             0x30
  72 #define SUN6I_BURST_CNT(cnt)                    ((cnt) & 0xffffff)
  73
  74 #define SUN6I_XMIT_CNT_REG              0x34
  75 #define SUN6I_XMIT_CNT(cnt)                     ((cnt) & 0xffffff)
  76
  77 #define SUN6I_BURST_CTL_CNT_REG         0x38
  78 #define SUN6I_BURST_CTL_CNT_STC(cnt)            ((cnt) & 0xffffff)
  79
  80 #define SUN6I_TXDATA_REG                0x200
  81 #define SUN6I_RXDATA_REG                0x300
  82
  83 struct sun6i_spi {
  84         struct spi_master       *master;
  85         void __iomem            *base_addr;
  86         struct clk              *hclk;
  87         struct clk              *mclk;
  88         struct reset_control    *rstc;
  89
  90         struct completion       done;
  91
  92         const u8                *tx_buf;
  93         u8                      *rx_buf;
  94         int                     len;
  95         unsigned long           fifo_depth;
  96 };
  97
  98 static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
  99 {
 100         return readl(sspi->base_addr + reg);
 101 }
 102
 103 static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
 104 {
 105         writel(value, sspi->base_addr + reg);
 106 }
 107
 108 static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
 109 {
 110         u32 reg, cnt;
 111         u8 byte;
 112
 113         /* See how much data is available */
 114         reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
 115         reg &= SUN6I_FIFO_STA_RF_CNT_MASK;
 116         cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS;
 117
 118         if (len > cnt)
 119                 len = cnt;
 120
 121         while (len--) {
 122                 byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
 123                 if (sspi->rx_buf)
 124                         *sspi->rx_buf++ = byte;
 125         }
 126 }
 127
 128 static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
 129 {
 130         u8 byte;
 131
 132         if (len > sspi->len)
 133                 len = sspi->len;
 134
 135         while (len--) {
 136                 byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
 137                 writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG);
 138                 sspi->len--;
 139         }
 140 }
 141
 142 static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
 143 {
 144         struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
 145         u32 reg;
 146
 147         reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 148         reg &= ~SUN6I_TFR_CTL_CS_MASK;
 149         reg |= SUN6I_TFR_CTL_CS(spi->chip_select);
 150
 151         if (enable)
 152                 reg |= SUN6I_TFR_CTL_CS_LEVEL;
 153         else
 154                 reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
 155
 156         sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
 157 }
 158
 159 static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
 160 {
 161         struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
 162
 163         return sspi->fifo_depth - 1;
 164 }
 165
 166 static int sun6i_spi_transfer_one(struct spi_master *master,
 167                                   struct spi_device *spi,
 168                                   struct spi_transfer *tfr)
 169 {
 170         struct sun6i_spi *sspi = spi_master_get_devdata(master);
 171         unsigned int mclk_rate, div, timeout;
 172         unsigned int start, end, tx_time;
 173         unsigned int tx_len = 0;
 174         int ret = 0;
 175         u32 reg;
 176
 177         /* We don't support transfer larger than the FIFO */
 178         if (tfr->len > sspi->fifo_depth)
 179                 return -EINVAL;
 180
 181         reinit_completion(&sspi->done);
 182         sspi->tx_buf = tfr->tx_buf;
 183         sspi->rx_buf = tfr->rx_buf;
 184         sspi->len = tfr->len;
 185
 186         /* Clear pending interrupts */
 187         sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0);
 188
 189         /* Reset FIFO */
 190         sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
 191                         SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);
 192
 193         /*
 194          * Setup the transfer control register: Chip Select,
 195          * polarities, etc.
 196          */
 197         reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 198
 199         if (spi->mode & SPI_CPOL)
 200                 reg |= SUN6I_TFR_CTL_CPOL;
 201         else
 202                 reg &= ~SUN6I_TFR_CTL_CPOL;
 203
 204         if (spi->mode & SPI_CPHA)
 205                 reg |= SUN6I_TFR_CTL_CPHA;
 206         else
 207                 reg &= ~SUN6I_TFR_CTL_CPHA;
 208
 209         if (spi->mode & SPI_LSB_FIRST)
 210                 reg |= SUN6I_TFR_CTL_FBS;
 211         else
 212                 reg &= ~SUN6I_TFR_CTL_FBS;
 213
 214         /*
 215          * If it's a TX only transfer, we don't want to fill the RX
 216          * FIFO with bogus data
 217          */
 218         if (sspi->rx_buf)
 219                 reg &= ~SUN6I_TFR_CTL_DHB;
 220         else
 221                 reg |= SUN6I_TFR_CTL_DHB;
 222
 223         /* We want to control the chip select manually */
 224         reg |= SUN6I_TFR_CTL_CS_MANUAL;
 225
 226         sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
 227
 228         /* Ensure that we have a parent clock fast enough */
 229         mclk_rate = clk_get_rate(sspi->mclk);
 230         if (mclk_rate < (2 * tfr->speed_hz)) {
 231                 clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
 232                 mclk_rate = clk_get_rate(sspi->mclk);
 233         }
 234
 235         /*
 236          * Setup clock divider.
 237          *
 238          * We have two choices there. Either we can use the clock
 239          * divide rate 1, which is calculated thanks to this formula:
 240          * SPI_CLK = MOD_CLK / (2 ^ cdr)
 241          * Or we can use CDR2, which is calculated with the formula:
 242          * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
 243          * Wether we use the former or the latter is set through the
 244          * DRS bit.
 245          *
 246          * First try CDR2, and if we can't reach the expected
 247          * frequency, fall back to CDR1.
 248          */
 249         div = mclk_rate / (2 * tfr->speed_hz);
 250         if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
 251                 if (div > 0)
 252                         div--;
 253
 254                 reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
 255         } else {
 256                 div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
 257                 reg = SUN6I_CLK_CTL_CDR1(div);
 258         }
 259
 260         sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
 261
 262         /* Setup the transfer now... */
 263         if (sspi->tx_buf)
 264                 tx_len = tfr->len;
 265
 266         /* Setup the counters */
 267         sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len));
 268         sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len));
 269         sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
 270                         SUN6I_BURST_CTL_CNT_STC(tx_len));
 271
 272         /* Fill the TX FIFO */
 273         sun6i_spi_fill_fifo(sspi, sspi->fifo_depth);
 274
 275         /* Enable the interrupts */
 276         sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
 277
 278         /* Start the transfer */
 279         reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 280         sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
 281
 282         tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
 283         start = jiffies;
 284         timeout = wait_for_completion_timeout(&sspi->done,
 285                                               msecs_to_jiffies(tx_time));
 286         end = jiffies;
 287         if (!timeout) {
 288                 dev_warn(&master->dev,
 289                          "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
 290                          dev_name(&spi->dev), tfr->len, tfr->speed_hz,
 291                          jiffies_to_msecs(end - start), tx_time);
 292                 ret = -ETIMEDOUT;
 293                 goto out;
 294         }
 295
 296         sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
 297
 298 out:
 299         sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
 300
 301         return ret;
 302 }
 303
 304 static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
 305 {
 306         struct sun6i_spi *sspi = dev_id;
 307         u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG);
 308
 309         /* Transfer complete */
 310         if (status & SUN6I_INT_CTL_TC) {
 311                 sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
 312                 complete(&sspi->done);
 313                 return IRQ_HANDLED;
 314         }
 315
 316         return IRQ_NONE;
 317 }
 318
 319 static int sun6i_spi_runtime_resume(struct device *dev)
 320 {
 321         struct spi_master *master = dev_get_drvdata(dev);
 322         struct sun6i_spi *sspi = spi_master_get_devdata(master);
 323         int ret;
 324
 325         ret = clk_prepare_enable(sspi->hclk);
 326         if (ret) {
 327                 dev_err(dev, "Couldn't enable AHB clock\n");
 328                 goto out;
 329         }
 330
 331         ret = clk_prepare_enable(sspi->mclk);
 332         if (ret) {
 333                 dev_err(dev, "Couldn't enable module clock\n");
 334                 goto err;
 335         }
 336
 337         ret = reset_control_deassert(sspi->rstc);
 338         if (ret) {
 339                 dev_err(dev, "Couldn't deassert the device from reset\n");
 340                 goto err2;
 341         }
 342
 343         sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
 344                         SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
 345
 346         return 0;
 347
 348 err2:
 349         clk_disable_unprepare(sspi->mclk);
 350 err:
 351         clk_disable_unprepare(sspi->hclk);
 352 out:
 353         return ret;
 354 }
 355
 356 static int sun6i_spi_runtime_suspend(struct device *dev)
 357 {
 358         struct spi_master *master = dev_get_drvdata(dev);
 359         struct sun6i_spi *sspi = spi_master_get_devdata(master);
 360
 361         reset_control_assert(sspi->rstc);
 362         clk_disable_unprepare(sspi->mclk);
 363         clk_disable_unprepare(sspi->hclk);
 364
 365         return 0;
 366 }
 367
 368 static int sun6i_spi_probe(struct platform_device *pdev)
 369 {
 370         struct spi_master *master;
 371         struct sun6i_spi *sspi;
 372         struct resource *res;
 373         int ret = 0, irq;
 374
 375         master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
 376         if (!master) {
 377                 dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
 378                 return -ENOMEM;
 379         }
 380
 381         platform_set_drvdata(pdev, master);
 382         sspi = spi_master_get_devdata(master);
 383
 384         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 385         sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
 386         if (IS_ERR(sspi->base_addr)) {
 387                 ret = PTR_ERR(sspi->base_addr);
 388                 goto err_free_master;
 389         }
 390
 391         irq = platform_get_irq(pdev, 0);
 392         if (irq < 0) {
 393                 dev_err(&pdev->dev, "No spi IRQ specified\n");
 394                 ret = -ENXIO;
 395                 goto err_free_master;
 396         }
 397
 398         ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler,
 399                                0, "sun6i-spi", sspi);
 400         if (ret) {
 401                 dev_err(&pdev->dev, "Cannot request IRQ\n");
 402                 goto err_free_master;
 403         }
 404
 405         sspi->master = master;
 406         sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
 407
 408         master->max_speed_hz = 100 * 1000 * 1000;
 409         master->min_speed_hz = 3 * 1000;
 410         master->set_cs = sun6i_spi_set_cs;
 411         master->transfer_one = sun6i_spi_transfer_one;
 412         master->num_chipselect = 4;
 413         master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
 414         master->bits_per_word_mask = SPI_BPW_MASK(8);
 415         master->dev.of_node = pdev->dev.of_node;
 416         master->auto_runtime_pm = true;
 417         master->max_transfer_size = sun6i_spi_max_transfer_size;
 418
 419         sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
 420         if (IS_ERR(sspi->hclk)) {
 421                 dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
 422                 ret = PTR_ERR(sspi->hclk);
 423                 goto err_free_master;
 424         }
 425
 426         sspi->mclk = devm_clk_get(&pdev->dev, "mod");
 427         if (IS_ERR(sspi->mclk)) {
 428                 dev_err(&pdev->dev, "Unable to acquire module clock\n");
 429                 ret = PTR_ERR(sspi->mclk);
 430                 goto err_free_master;
 431         }
 432
 433         init_completion(&sspi->done);
 434
 435         sspi->rstc = devm_reset_control_get(&pdev->dev, NULL);
 436         if (IS_ERR(sspi->rstc)) {
 437                 dev_err(&pdev->dev, "Couldn't get reset controller\n");
 438                 ret = PTR_ERR(sspi->rstc);
 439                 goto err_free_master;
 440         }
 441
 442         /*
 443          * This wake-up/shutdown pattern is to be able to have the
 444          * device woken up, even if runtime_pm is disabled
 445          */
 446         ret = sun6i_spi_runtime_resume(&pdev->dev);
 447         if (ret) {
 448                 dev_err(&pdev->dev, "Couldn't resume the device\n");
 449                 goto err_free_master;
 450         }
 451
 452         pm_runtime_set_active(&pdev->dev);
 453         pm_runtime_enable(&pdev->dev);
 454         pm_runtime_idle(&pdev->dev);
 455
 456         ret = devm_spi_register_master(&pdev->dev, master);
 457         if (ret) {
 458                 dev_err(&pdev->dev, "cannot register SPI master\n");
 459                 goto err_pm_disable;
 460         }
 461
 462         return 0;
 463
 464 err_pm_disable:
 465         pm_runtime_disable(&pdev->dev);
 466         sun6i_spi_runtime_suspend(&pdev->dev);
 467 err_free_master:
 468         spi_master_put(master);
 469         return ret;
 470 }
 471
 472 static int sun6i_spi_remove(struct platform_device *pdev)
 473 {
 474         pm_runtime_disable(&pdev->dev);
 475
 476         return 0;
 477 }
 478
 479 static const struct of_device_id sun6i_spi_match[] = {
 480         { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
 481         { .compatible = "allwinner,sun8i-h3-spi",  .data = (void *)SUN8I_FIFO_DEPTH },
 482         {}
 483 };
 484 MODULE_DEVICE_TABLE(of, sun6i_spi_match);
 485
 486 static const struct dev_pm_ops sun6i_spi_pm_ops = {
 487         .runtime_resume         = sun6i_spi_runtime_resume,
 488         .runtime_suspend        = sun6i_spi_runtime_suspend,
 489 };
 490
 491 static struct platform_driver sun6i_spi_driver = {
 492         .probe  = sun6i_spi_probe,
 493         .remove = sun6i_spi_remove,
 494         .driver = {
 495                 .name           = "sun6i-spi",
 496                 .of_match_table = sun6i_spi_match,
 497                 .pm             = &sun6i_spi_pm_ops,
 498         },
 499 };
 500 module_platform_driver(sun6i_spi_driver);
 501
 502 MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
 503 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
 504 MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
 505 MODULE_LICENSE("GPL");