drivers/staging/media/atomisp/i2c/lm3554.c

   1 /*
   2  * LED flash driver for LM3554
   3  *
   4  * Copyright (c) 2010-2012 Intel Corporation. All Rights Reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License version
   8  * 2 as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  18  * 02110-1301, USA.
  19  *
  20  */
  21 #include <linux/module.h>
  22 #include <linux/i2c.h>
  23 #include <linux/mutex.h>
  24 #include <linux/delay.h>
  25 #include <linux/gpio.h>
  26 #include <linux/slab.h>
  27
  28 #include "../include/media/lm3554.h"
  29 #include <media/v4l2-ctrls.h>
  30 #include <media/v4l2-device.h>
  31 #include <linux/acpi.h>
  32 #include <linux/gpio/consumer.h>
  33 #include "../include/linux/atomisp_gmin_platform.h"
  34 #include "../include/linux/atomisp.h"
  35
  36 /* Registers */
  37
  38 #define LM3554_TORCH_BRIGHTNESS_REG     0xA0
  39 #define LM3554_TORCH_MODE_SHIFT         0
  40 #define LM3554_TORCH_CURRENT_SHIFT      3
  41 #define LM3554_INDICATOR_CURRENT_SHIFT  6
  42
  43 #define LM3554_FLASH_BRIGHTNESS_REG     0xB0
  44 #define LM3554_FLASH_MODE_SHIFT         0
  45 #define LM3554_FLASH_CURRENT_SHIFT      3
  46 #define LM3554_STROBE_SENSITIVITY_SHIFT 7
  47
  48 #define LM3554_FLASH_DURATION_REG       0xC0
  49 #define LM3554_FLASH_TIMEOUT_SHIFT      0
  50 #define LM3554_CURRENT_LIMIT_SHIFT      5
  51
  52 #define LM3554_FLAGS_REG                0xD0
  53 #define LM3554_FLAG_TIMEOUT             (1 << 0)
  54 #define LM3554_FLAG_THERMAL_SHUTDOWN    (1 << 1)
  55 #define LM3554_FLAG_LED_FAULT           (1 << 2)
  56 #define LM3554_FLAG_TX1_INTERRUPT       (1 << 3)
  57 #define LM3554_FLAG_TX2_INTERRUPT       (1 << 4)
  58 #define LM3554_FLAG_LED_THERMAL_FAULT   (1 << 5)
  59 #define LM3554_FLAG_UNUSED              (1 << 6)
  60 #define LM3554_FLAG_INPUT_VOLTAGE_LOW   (1 << 7)
  61
  62 #define LM3554_CONFIG_REG_1             0xE0
  63 #define LM3554_ENVM_TX2_SHIFT           5
  64 #define LM3554_TX2_POLARITY_SHIFT       6
  65
  66 struct lm3554 {
  67         struct v4l2_subdev sd;
  68
  69         struct mutex power_lock;
  70         struct v4l2_ctrl_handler ctrl_handler;
  71         int power_count;
  72
  73         unsigned int mode;
  74         int timeout;
  75         u8 torch_current;
  76         u8 indicator_current;
  77         u8 flash_current;
  78
  79         struct timer_list flash_off_delay;
  80         struct lm3554_platform_data *pdata;
  81 };
  82
  83 #define to_lm3554(p_sd) container_of(p_sd, struct lm3554, sd)
  84
  85 /* Return negative errno else zero on success */
  86 static int lm3554_write(struct lm3554 *flash, u8 addr, u8 val)
  87 {
  88         struct i2c_client *client = v4l2_get_subdevdata(&flash->sd);
  89         int ret;
  90
  91         ret = i2c_smbus_write_byte_data(client, addr, val);
  92
  93         dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val,
  94                 ret < 0 ? "fail" : "ok");
  95
  96         return ret;
  97 }
  98
  99 /* Return negative errno else a data byte received from the device. */
 100 static int lm3554_read(struct lm3554 *flash, u8 addr)
 101 {
 102         struct i2c_client *client = v4l2_get_subdevdata(&flash->sd);
 103         int ret;
 104
 105         ret = i2c_smbus_read_byte_data(client, addr);
 106
 107         dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, ret,
 108                 ret < 0 ? "fail" : "ok");
 109
 110         return ret;
 111 }
 112
 113 /* -----------------------------------------------------------------------------
 114  * Hardware configuration
 115  */
 116
 117 static int lm3554_set_mode(struct lm3554 *flash, unsigned int mode)
 118 {
 119         u8 val;
 120         int ret;
 121
 122         val = (mode << LM3554_FLASH_MODE_SHIFT) |
 123               (flash->flash_current << LM3554_FLASH_CURRENT_SHIFT);
 124
 125         ret = lm3554_write(flash, LM3554_FLASH_BRIGHTNESS_REG, val);
 126         if (ret == 0)
 127                 flash->mode = mode;
 128         return ret;
 129 }
 130
 131 static int lm3554_set_torch(struct lm3554 *flash)
 132 {
 133         u8 val;
 134
 135         val = (flash->mode << LM3554_TORCH_MODE_SHIFT) |
 136               (flash->torch_current << LM3554_TORCH_CURRENT_SHIFT) |
 137               (flash->indicator_current << LM3554_INDICATOR_CURRENT_SHIFT);
 138
 139         return lm3554_write(flash, LM3554_TORCH_BRIGHTNESS_REG, val);
 140 }
 141
 142 static int lm3554_set_flash(struct lm3554 *flash)
 143 {
 144         u8 val;
 145
 146         val = (flash->mode << LM3554_FLASH_MODE_SHIFT) |
 147               (flash->flash_current << LM3554_FLASH_CURRENT_SHIFT);
 148
 149         return lm3554_write(flash, LM3554_FLASH_BRIGHTNESS_REG, val);
 150 }
 151
 152 static int lm3554_set_duration(struct lm3554 *flash)
 153 {
 154         u8 val;
 155
 156         val = (flash->timeout << LM3554_FLASH_TIMEOUT_SHIFT) |
 157               (flash->pdata->current_limit << LM3554_CURRENT_LIMIT_SHIFT);
 158
 159         return lm3554_write(flash, LM3554_FLASH_DURATION_REG, val);
 160 }
 161
 162 static int lm3554_set_config1(struct lm3554 *flash)
 163 {
 164         u8 val;
 165
 166         val = (flash->pdata->envm_tx2 << LM3554_ENVM_TX2_SHIFT) |
 167               (flash->pdata->tx2_polarity << LM3554_TX2_POLARITY_SHIFT);
 168         return lm3554_write(flash, LM3554_CONFIG_REG_1, val);
 169 }
 170
 171 /* -----------------------------------------------------------------------------
 172  * Hardware trigger
 173  */
 174 static void lm3554_flash_off_delay(long unsigned int arg)
 175 {
 176         struct v4l2_subdev *sd = i2c_get_clientdata((struct i2c_client *)arg);
 177         struct lm3554 *flash = to_lm3554(sd);
 178         struct lm3554_platform_data *pdata = flash->pdata;
 179
 180         gpio_set_value(pdata->gpio_strobe, 0);
 181 }
 182
 183 static int lm3554_hw_strobe(struct i2c_client *client, bool strobe)
 184 {
 185         int ret, timer_pending;
 186         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 187         struct lm3554 *flash = to_lm3554(sd);
 188         struct lm3554_platform_data *pdata = flash->pdata;
 189
 190         /*
 191          * An abnormal high flash current is observed when strobe off the
 192          * flash. Workaround here is firstly set flash current to lower level,
 193          * wait a short moment, and then strobe off the flash.
 194          */
 195
 196         timer_pending = del_timer_sync(&flash->flash_off_delay);
 197
 198         /* Flash off */
 199         if (!strobe) {
 200                 /* set current to 70mA and wait a while */
 201                 ret = lm3554_write(flash, LM3554_FLASH_BRIGHTNESS_REG, 0);
 202                 if (ret < 0)
 203                         goto err;
 204                 mod_timer(&flash->flash_off_delay,
 205                           jiffies + msecs_to_jiffies(LM3554_TIMER_DELAY));
 206                 return 0;
 207         }
 208
 209         /* Flash on */
 210
 211         /*
 212          * If timer is killed before run, flash is not strobe off,
 213          * so must strobe off here
 214          */
 215         if (timer_pending)
 216                 gpio_set_value(pdata->gpio_strobe, 0);
 217
 218         /* Restore flash current settings */
 219         ret = lm3554_set_flash(flash);
 220         if (ret < 0)
 221                 goto err;
 222
 223         /* Strobe on Flash */
 224         gpio_set_value(pdata->gpio_strobe, 1);
 225
 226         return 0;
 227 err:
 228         dev_err(&client->dev, "failed to %s flash strobe (%d)\n",
 229                 strobe ? "on" : "off", ret);
 230         return ret;
 231 }
 232
 233 /* -----------------------------------------------------------------------------
 234  * V4L2 controls
 235  */
 236
 237 static int lm3554_read_status(struct lm3554 *flash)
 238 {
 239         int ret;
 240         struct i2c_client *client = v4l2_get_subdevdata(&flash->sd);
 241
 242         /* NOTE: reading register clear fault status */
 243         ret = lm3554_read(flash, LM3554_FLAGS_REG);
 244         if (ret < 0)
 245                 return ret;
 246
 247         /*
 248          * Accordingly to datasheet we read back '1' in bit 6.
 249          * Clear it first.
 250          */
 251         ret &= ~LM3554_FLAG_UNUSED;
 252
 253         /*
 254          * Do not take TX1/TX2 signal as an error
 255          * because MSIC will not turn off flash, but turn to
 256          * torch mode according to gsm modem signal by hardware.
 257          */
 258         ret &= ~(LM3554_FLAG_TX1_INTERRUPT | LM3554_FLAG_TX2_INTERRUPT);
 259
 260         if (ret > 0)
 261                 dev_dbg(&client->dev, "LM3554 flag status: %02x\n", ret);
 262
 263         return ret;
 264 }
 265
 266 static int lm3554_s_flash_timeout(struct v4l2_subdev *sd, u32 val)
 267 {
 268         struct lm3554 *flash = to_lm3554(sd);
 269
 270         val = clamp(val, LM3554_MIN_TIMEOUT, LM3554_MAX_TIMEOUT);
 271         val = val / LM3554_TIMEOUT_STEPSIZE - 1;
 272
 273         flash->timeout = val;
 274
 275         return lm3554_set_duration(flash);
 276 }
 277
 278 static int lm3554_g_flash_timeout(struct v4l2_subdev *sd, s32 *val)
 279 {
 280         struct lm3554 *flash = to_lm3554(sd);
 281
 282         *val = (u32)(flash->timeout + 1) * LM3554_TIMEOUT_STEPSIZE;
 283
 284         return 0;
 285 }
 286
 287 static int lm3554_s_flash_intensity(struct v4l2_subdev *sd, u32 intensity)
 288 {
 289         struct lm3554 *flash = to_lm3554(sd);
 290
 291         intensity = LM3554_CLAMP_PERCENTAGE(intensity);
 292         intensity = LM3554_PERCENT_TO_VALUE(intensity, LM3554_FLASH_STEP);
 293
 294         flash->flash_current = intensity;
 295
 296         return lm3554_set_flash(flash);
 297 }
 298
 299 static int lm3554_g_flash_intensity(struct v4l2_subdev *sd, s32 *val)
 300 {
 301         struct lm3554 *flash = to_lm3554(sd);
 302
 303         *val = LM3554_VALUE_TO_PERCENT((u32)flash->flash_current,
 304                         LM3554_FLASH_STEP);
 305
 306         return 0;
 307 }
 308
 309 static int lm3554_s_torch_intensity(struct v4l2_subdev *sd, u32 intensity)
 310 {
 311         struct lm3554 *flash = to_lm3554(sd);
 312
 313         intensity = LM3554_CLAMP_PERCENTAGE(intensity);
 314         intensity = LM3554_PERCENT_TO_VALUE(intensity, LM3554_TORCH_STEP);
 315
 316         flash->torch_current = intensity;
 317
 318         return lm3554_set_torch(flash);
 319 }
 320
 321 static int lm3554_g_torch_intensity(struct v4l2_subdev *sd, s32 *val)
 322 {
 323         struct lm3554 *flash = to_lm3554(sd);
 324
 325         *val = LM3554_VALUE_TO_PERCENT((u32)flash->torch_current,
 326                         LM3554_TORCH_STEP);
 327
 328         return 0;
 329 }
 330
 331 static int lm3554_s_indicator_intensity(struct v4l2_subdev *sd, u32 intensity)
 332 {
 333         struct lm3554 *flash = to_lm3554(sd);
 334
 335         intensity = LM3554_CLAMP_PERCENTAGE(intensity);
 336         intensity = LM3554_PERCENT_TO_VALUE(intensity, LM3554_INDICATOR_STEP);
 337
 338         flash->indicator_current = intensity;
 339
 340         return lm3554_set_torch(flash);
 341 }
 342
 343 static int lm3554_g_indicator_intensity(struct v4l2_subdev *sd, s32 *val)
 344 {
 345         struct lm3554 *flash = to_lm3554(sd);
 346
 347         *val = LM3554_VALUE_TO_PERCENT((u32)flash->indicator_current,
 348                         LM3554_INDICATOR_STEP);
 349
 350         return 0;
 351 }
 352
 353 static int lm3554_s_flash_strobe(struct v4l2_subdev *sd, u32 val)
 354 {
 355         struct i2c_client *client = v4l2_get_subdevdata(sd);
 356
 357         return lm3554_hw_strobe(client, val);
 358 }
 359
 360 static int lm3554_s_flash_mode(struct v4l2_subdev *sd, u32 new_mode)
 361 {
 362         struct lm3554 *flash = to_lm3554(sd);
 363         unsigned int mode;
 364
 365         switch (new_mode) {
 366         case ATOMISP_FLASH_MODE_OFF:
 367                 mode = LM3554_MODE_SHUTDOWN;
 368                 break;
 369         case ATOMISP_FLASH_MODE_FLASH:
 370                 mode = LM3554_MODE_FLASH;
 371                 break;
 372         case ATOMISP_FLASH_MODE_INDICATOR:
 373                 mode = LM3554_MODE_INDICATOR;
 374                 break;
 375         case ATOMISP_FLASH_MODE_TORCH:
 376                 mode = LM3554_MODE_TORCH;
 377                 break;
 378         default:
 379                 return -EINVAL;
 380         }
 381
 382         return lm3554_set_mode(flash, mode);
 383 }
 384
 385 static int lm3554_g_flash_mode(struct v4l2_subdev *sd, s32 *val)
 386 {
 387         struct lm3554 *flash = to_lm3554(sd);
 388         *val = flash->mode;
 389         return 0;
 390 }
 391
 392 static int lm3554_g_flash_status(struct v4l2_subdev *sd, s32 *val)
 393 {
 394         struct lm3554 *flash = to_lm3554(sd);
 395         int value;
 396
 397         value = lm3554_read_status(flash);
 398         if (value < 0)
 399                 return value;
 400
 401         if (value & LM3554_FLAG_TIMEOUT)
 402                 *val = ATOMISP_FLASH_STATUS_TIMEOUT;
 403         else if (value > 0)
 404                 *val = ATOMISP_FLASH_STATUS_HW_ERROR;
 405         else
 406                 *val = ATOMISP_FLASH_STATUS_OK;
 407
 408         return 0;
 409 }
 410
 411 #ifndef CSS15
 412 static int lm3554_g_flash_status_register(struct v4l2_subdev *sd, s32 *val)
 413 {
 414         struct lm3554 *flash = to_lm3554(sd);
 415         int ret;
 416
 417         ret = lm3554_read(flash, LM3554_FLAGS_REG);
 418
 419         if (ret < 0)
 420                 return ret;
 421
 422         *val = ret;
 423         return 0;
 424 }
 425 #endif
 426
 427 static int lm3554_s_ctrl(struct v4l2_ctrl *ctrl)
 428 {
 429         struct lm3554 *dev =
 430             container_of(ctrl->handler, struct lm3554, ctrl_handler);
 431         int ret = 0;
 432
 433         switch (ctrl->id) {
 434         case V4L2_CID_FLASH_TIMEOUT:
 435                 ret = lm3554_s_flash_timeout(&dev->sd, ctrl->val);
 436                 break;
 437         case V4L2_CID_FLASH_INTENSITY:
 438                 ret = lm3554_s_flash_intensity(&dev->sd, ctrl->val);
 439                 break;
 440         case V4L2_CID_FLASH_TORCH_INTENSITY:
 441                 ret = lm3554_s_torch_intensity(&dev->sd, ctrl->val);
 442                 break;
 443         case V4L2_CID_FLASH_INDICATOR_INTENSITY:
 444                 ret = lm3554_s_indicator_intensity(&dev->sd, ctrl->val);
 445                 break;
 446         case V4L2_CID_FLASH_STROBE:
 447                 ret = lm3554_s_flash_strobe(&dev->sd, ctrl->val);
 448                 break;
 449         case V4L2_CID_FLASH_MODE:
 450                 ret = lm3554_s_flash_mode(&dev->sd, ctrl->val);
 451                 break;
 452         default:
 453                 ret = -EINVAL;
 454         }
 455         return ret;
 456 }
 457
 458 static int lm3554_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 459 {
 460         struct lm3554 *dev =
 461             container_of(ctrl->handler, struct lm3554, ctrl_handler);
 462         int ret = 0;
 463
 464         switch (ctrl->id) {
 465         case V4L2_CID_FLASH_TIMEOUT:
 466                 ret = lm3554_g_flash_timeout(&dev->sd, &ctrl->val);
 467                 break;
 468         case V4L2_CID_FLASH_INTENSITY:
 469                 ret = lm3554_g_flash_intensity(&dev->sd, &ctrl->val);
 470                 break;
 471         case V4L2_CID_FLASH_TORCH_INTENSITY:
 472                 ret = lm3554_g_torch_intensity(&dev->sd, &ctrl->val);
 473                 break;
 474         case V4L2_CID_FLASH_INDICATOR_INTENSITY:
 475                 ret = lm3554_g_indicator_intensity(&dev->sd, &ctrl->val);
 476                 break;
 477         case V4L2_CID_FLASH_MODE:
 478                 ret = lm3554_g_flash_mode(&dev->sd, &ctrl->val);
 479                 break;
 480         case V4L2_CID_FLASH_STATUS:
 481                 ret = lm3554_g_flash_status(&dev->sd, &ctrl->val);
 482                 break;
 483 #ifndef CSS15
 484         case V4L2_CID_FLASH_STATUS_REGISTER:
 485                 ret = lm3554_g_flash_status_register(&dev->sd, &ctrl->val);
 486                 break;
 487 #endif
 488         default:
 489                 ret = -EINVAL;
 490         }
 491
 492         return ret;
 493 }
 494
 495 static const struct v4l2_ctrl_ops ctrl_ops = {
 496         .s_ctrl = lm3554_s_ctrl,
 497         .g_volatile_ctrl = lm3554_g_volatile_ctrl
 498 };
 499
 500 static const struct v4l2_ctrl_config lm3554_controls[] = {
 501         {
 502          .ops = &ctrl_ops,
 503          .id = V4L2_CID_FLASH_TIMEOUT,
 504          .type = V4L2_CTRL_TYPE_INTEGER,
 505          .name = "Flash Timeout",
 506          .min = 0x0,
 507          .max = LM3554_MAX_TIMEOUT,
 508          .step = 0x01,
 509          .def = LM3554_DEFAULT_TIMEOUT,
 510          .flags = 0,
 511          },
 512         {
 513          .ops = &ctrl_ops,
 514          .id = V4L2_CID_FLASH_INTENSITY,
 515          .type = V4L2_CTRL_TYPE_INTEGER,
 516          .name = "Flash Intensity",
 517          .min = LM3554_MIN_PERCENT,
 518          .max = LM3554_MAX_PERCENT,
 519          .step = 0x01,
 520          .def = LM3554_FLASH_DEFAULT_BRIGHTNESS,
 521          .flags = 0,
 522          },
 523         {
 524          .ops = &ctrl_ops,
 525          .id = V4L2_CID_FLASH_TORCH_INTENSITY,
 526          .type = V4L2_CTRL_TYPE_INTEGER,
 527          .name = "Torch Intensity",
 528          .min = LM3554_MIN_PERCENT,
 529          .max = LM3554_MAX_PERCENT,
 530          .step = 0x01,
 531          .def = LM3554_TORCH_DEFAULT_BRIGHTNESS,
 532          .flags = 0,
 533          },
 534         {
 535          .ops = &ctrl_ops,
 536          .id = V4L2_CID_FLASH_INDICATOR_INTENSITY,
 537          .type = V4L2_CTRL_TYPE_INTEGER,
 538          .name = "Indicator Intensity",
 539          .min = LM3554_MIN_PERCENT,
 540          .max = LM3554_MAX_PERCENT,
 541          .step = 0x01,
 542          .def = LM3554_INDICATOR_DEFAULT_BRIGHTNESS,
 543          .flags = 0,
 544          },
 545         {
 546          .ops = &ctrl_ops,
 547          .id = V4L2_CID_FLASH_STROBE,
 548          .type = V4L2_CTRL_TYPE_BOOLEAN,
 549          .name = "Flash Strobe",
 550          .min = 0,
 551          .max = 1,
 552          .step = 1,
 553          .def = 0,
 554          .flags = 0,
 555          },
 556         {
 557          .ops = &ctrl_ops,
 558          .id = V4L2_CID_FLASH_MODE,
 559          .type = V4L2_CTRL_TYPE_INTEGER,
 560          .name = "Flash Mode",
 561          .min = 0,
 562          .max = 100,
 563          .step = 1,
 564          .def = ATOMISP_FLASH_MODE_OFF,
 565          .flags = 0,
 566          },
 567         {
 568          .ops = &ctrl_ops,
 569          .id = V4L2_CID_FLASH_STATUS,
 570          .type = V4L2_CTRL_TYPE_BOOLEAN,
 571          .name = "Flash Status",
 572          .min = 0,
 573          .max = 100,
 574          .step = 1,
 575          .def = ATOMISP_FLASH_STATUS_OK,
 576          .flags = 0,
 577          },
 578 #ifndef CSS15
 579         {
 580          .ops = &ctrl_ops,
 581          .id = V4L2_CID_FLASH_STATUS_REGISTER,
 582          .type = V4L2_CTRL_TYPE_BOOLEAN,
 583          .name = "Flash Status Register",
 584          .min = 0,
 585          .max = 100,
 586          .step = 1,
 587          .def = 0,
 588          .flags = 0,
 589          },
 590 #endif
 591 };
 592
 593 /* -----------------------------------------------------------------------------
 594  * V4L2 subdev core operations
 595  */
 596
 597 /* Put device into known state. */
 598 static int lm3554_setup(struct lm3554 *flash)
 599 {
 600         struct i2c_client *client = v4l2_get_subdevdata(&flash->sd);
 601         int ret;
 602
 603         /* clear the flags register */
 604         ret = lm3554_read(flash, LM3554_FLAGS_REG);
 605         if (ret < 0)
 606                 return ret;
 607
 608         dev_dbg(&client->dev, "Fault info: %02x\n", ret);
 609
 610         ret = lm3554_set_config1(flash);
 611         if (ret < 0)
 612                 return ret;
 613
 614         ret = lm3554_set_duration(flash);
 615         if (ret < 0)
 616                 return ret;
 617
 618         ret = lm3554_set_torch(flash);
 619         if (ret < 0)
 620                 return ret;
 621
 622         ret = lm3554_set_flash(flash);
 623         if (ret < 0)
 624                 return ret;
 625
 626         /* read status */
 627         ret = lm3554_read_status(flash);
 628         if (ret < 0)
 629                 return ret;
 630
 631         return ret ? -EIO : 0;
 632 }
 633
 634 static int __lm3554_s_power(struct lm3554 *flash, int power)
 635 {
 636         struct lm3554_platform_data *pdata = flash->pdata;
 637         int ret;
 638
 639         /*initialize flash driver*/
 640         gpio_set_value(pdata->gpio_reset, power);
 641         usleep_range(100, 100 + 1);
 642
 643         if (power) {
 644                 /* Setup default values. This makes sure that the chip
 645                  * is in a known state.
 646                  */
 647                 ret = lm3554_setup(flash);
 648                 if (ret < 0) {
 649                         __lm3554_s_power(flash, 0);
 650                         return ret;
 651                 }
 652         }
 653
 654         return 0;
 655 }
 656
 657 static int lm3554_s_power(struct v4l2_subdev *sd, int power)
 658 {
 659         struct lm3554 *flash = to_lm3554(sd);
 660         int ret = 0;
 661
 662         mutex_lock(&flash->power_lock);
 663
 664         if (flash->power_count == !power) {
 665                 ret = __lm3554_s_power(flash, !!power);
 666                 if (ret < 0)
 667                         goto done;
 668         }
 669
 670         flash->power_count += power ? 1 : -1;
 671         WARN_ON(flash->power_count < 0);
 672
 673 done:
 674         mutex_unlock(&flash->power_lock);
 675         return ret;
 676 }
 677
 678 static const struct v4l2_subdev_core_ops lm3554_core_ops = {
 679         .s_power = lm3554_s_power,
 680 };
 681
 682 static const struct v4l2_subdev_ops lm3554_ops = {
 683         .core = &lm3554_core_ops,
 684 };
 685
 686 static int lm3554_detect(struct v4l2_subdev *sd)
 687 {
 688         struct i2c_client *client = v4l2_get_subdevdata(sd);
 689         struct i2c_adapter *adapter = client->adapter;
 690         struct lm3554 *flash = to_lm3554(sd);
 691         int ret;
 692
 693         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 694                 dev_err(&client->dev, "lm3554_detect i2c error\n");
 695                 return -ENODEV;
 696         }
 697
 698         /* Power up the flash driver and reset it */
 699         ret = lm3554_s_power(&flash->sd, 1);
 700         if (ret < 0) {
 701                 dev_err(&client->dev, "Failed to power on lm3554 LED flash\n");
 702         } else {
 703                 dev_dbg(&client->dev, "Successfully detected lm3554 LED flash\n");
 704                 lm3554_s_power(&flash->sd, 0);
 705         }
 706
 707         return ret;
 708 }
 709
 710 static int lm3554_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 711 {
 712         return lm3554_s_power(sd, 1);
 713 }
 714
 715 static int lm3554_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 716 {
 717         return lm3554_s_power(sd, 0);
 718 }
 719
 720 static const struct v4l2_subdev_internal_ops lm3554_internal_ops = {
 721         .registered = lm3554_detect,
 722         .open = lm3554_open,
 723         .close = lm3554_close,
 724 };
 725
 726 /* -----------------------------------------------------------------------------
 727  *  I2C driver
 728  */
 729 #ifdef CONFIG_PM
 730
 731 static int lm3554_suspend(struct device *dev)
 732 {
 733         struct i2c_client *client = to_i2c_client(dev);
 734         struct v4l2_subdev *subdev = i2c_get_clientdata(client);
 735         struct lm3554 *flash = to_lm3554(subdev);
 736         int rval;
 737
 738         if (flash->power_count == 0)
 739                 return 0;
 740
 741         rval = __lm3554_s_power(flash, 0);
 742
 743         dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok");
 744
 745         return rval;
 746 }
 747
 748 static int lm3554_resume(struct device *dev)
 749 {
 750         struct i2c_client *client = to_i2c_client(dev);
 751         struct v4l2_subdev *subdev = i2c_get_clientdata(client);
 752         struct lm3554 *flash = to_lm3554(subdev);
 753         int rval;
 754
 755         if (flash->power_count == 0)
 756                 return 0;
 757
 758         rval = __lm3554_s_power(flash, 1);
 759
 760         dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok");
 761
 762         return rval;
 763 }
 764
 765 #else
 766
 767 #define lm3554_suspend NULL
 768 #define lm3554_resume  NULL
 769
 770 #endif /* CONFIG_PM */
 771
 772 static int lm3554_gpio_init(struct i2c_client *client)
 773 {
 774         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 775         struct lm3554 *flash = to_lm3554(sd);
 776         struct lm3554_platform_data *pdata = flash->pdata;
 777         int ret;
 778
 779         if (!gpio_is_valid(pdata->gpio_reset))
 780                 return -EINVAL;
 781
 782         ret = gpio_direction_output(pdata->gpio_reset, 0);
 783         if (ret < 0)
 784                 goto err_gpio_reset;
 785         dev_info(&client->dev, "flash led reset successfully\n");
 786
 787         if (!gpio_is_valid(pdata->gpio_strobe)) {
 788                 ret = -EINVAL;
 789                 goto err_gpio_dir_reset;
 790         }
 791
 792         ret = gpio_direction_output(pdata->gpio_strobe, 0);
 793         if (ret < 0)
 794                 goto err_gpio_strobe;
 795
 796         return 0;
 797
 798 err_gpio_strobe:
 799         gpio_free(pdata->gpio_strobe);
 800 err_gpio_dir_reset:
 801         gpio_direction_output(pdata->gpio_reset, 0);
 802 err_gpio_reset:
 803         gpio_free(pdata->gpio_reset);
 804
 805         return ret;
 806 }
 807
 808 static int lm3554_gpio_uninit(struct i2c_client *client)
 809 {
 810         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 811         struct lm3554 *flash = to_lm3554(sd);
 812         struct lm3554_platform_data *pdata = flash->pdata;
 813         int ret;
 814
 815         ret = gpio_direction_output(pdata->gpio_strobe, 0);
 816         if (ret < 0)
 817                 return ret;
 818
 819         ret = gpio_direction_output(pdata->gpio_reset, 0);
 820         if (ret < 0)
 821                 return ret;
 822
 823         gpio_free(pdata->gpio_strobe);
 824         gpio_free(pdata->gpio_reset);
 825         return 0;
 826 }
 827
 828 static void *lm3554_platform_data_func(struct i2c_client *client)
 829 {
 830         static struct lm3554_platform_data platform_data;
 831
 832         if (ACPI_COMPANION(&client->dev)) {
 833                 platform_data.gpio_reset =
 834                     desc_to_gpio(gpiod_get_index(&(client->dev),
 835                                                  NULL, 2, GPIOD_OUT_LOW));
 836                 platform_data.gpio_strobe =
 837                     desc_to_gpio(gpiod_get_index(&(client->dev),
 838                                                  NULL, 0, GPIOD_OUT_LOW));
 839                 platform_data.gpio_torch =
 840                     desc_to_gpio(gpiod_get_index(&(client->dev),
 841                                                  NULL, 1, GPIOD_OUT_LOW));
 842         } else {
 843                 platform_data.gpio_reset = -1;
 844                 platform_data.gpio_strobe = -1;
 845                 platform_data.gpio_torch = -1;
 846         }
 847
 848         dev_info(&client->dev, "camera pdata: lm3554: reset: %d strobe %d torch %d\n",
 849                 platform_data.gpio_reset, platform_data.gpio_strobe,
 850                 platform_data.gpio_torch);
 851
 852         /* Set to TX2 mode, then ENVM/TX2 pin is a power amplifier sync input:
 853          * ENVM/TX pin asserted, flash forced into torch;
 854          * ENVM/TX pin desserted, flash set back;
 855          */
 856         platform_data.envm_tx2 = 1;
 857         platform_data.tx2_polarity = 0;
 858
 859         /* set peak current limit to be 1000mA */
 860         platform_data.current_limit = 0;
 861
 862         return &platform_data;
 863 }
 864
 865 static int lm3554_probe(struct i2c_client *client,
 866                                   const struct i2c_device_id *id)
 867 {
 868         int err = 0;
 869         struct lm3554 *flash;
 870         unsigned int i;
 871         int ret;
 872
 873         flash = kzalloc(sizeof(*flash), GFP_KERNEL);
 874         if (!flash) {
 875                 dev_err(&client->dev, "out of memory\n");
 876                 return -ENOMEM;
 877         }
 878
 879         flash->pdata = client->dev.platform_data;
 880
 881         if (!flash->pdata || ACPI_COMPANION(&client->dev))
 882                 flash->pdata = lm3554_platform_data_func(client);
 883
 884         v4l2_i2c_subdev_init(&flash->sd, client, &lm3554_ops);
 885         flash->sd.internal_ops = &lm3554_internal_ops;
 886         flash->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 887         flash->mode = ATOMISP_FLASH_MODE_OFF;
 888         flash->timeout = LM3554_MAX_TIMEOUT / LM3554_TIMEOUT_STEPSIZE - 1;
 889         ret =
 890             v4l2_ctrl_handler_init(&flash->ctrl_handler,
 891                                    ARRAY_SIZE(lm3554_controls));
 892         if (ret) {
 893                 dev_err(&client->dev, "error initialize a ctrl_handler.\n");
 894                 goto fail2;
 895         }
 896
 897         for (i = 0; i < ARRAY_SIZE(lm3554_controls); i++)
 898                 v4l2_ctrl_new_custom(&flash->ctrl_handler, &lm3554_controls[i],
 899                                      NULL);
 900
 901         if (flash->ctrl_handler.error) {
 902
 903                 dev_err(&client->dev, "ctrl_handler error.\n");
 904                 goto fail2;
 905         }
 906
 907         flash->sd.ctrl_handler = &flash->ctrl_handler;
 908         err = media_entity_pads_init(&flash->sd.entity, 0, NULL);
 909         if (err) {
 910                 dev_err(&client->dev, "error initialize a media entity.\n");
 911                 goto fail1;
 912         }
 913
 914         flash->sd.entity.function = MEDIA_ENT_F_FLASH;
 915
 916         mutex_init(&flash->power_lock);
 917
 918         setup_timer(&flash->flash_off_delay, lm3554_flash_off_delay,
 919                     (unsigned long)client);
 920
 921         err = lm3554_gpio_init(client);
 922         if (err) {
 923                 dev_err(&client->dev, "gpio request/direction_output fail");
 924                 goto fail2;
 925         }
 926         if (ACPI_HANDLE(&client->dev))
 927                 err = atomisp_register_i2c_module(&flash->sd, NULL, LED_FLASH);
 928         return 0;
 929 fail2:
 930         media_entity_cleanup(&flash->sd.entity);
 931         v4l2_ctrl_handler_free(&flash->ctrl_handler);
 932 fail1:
 933         v4l2_device_unregister_subdev(&flash->sd);
 934         kfree(flash);
 935
 936         return err;
 937 }
 938
 939 static int lm3554_remove(struct i2c_client *client)
 940 {
 941         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 942         struct lm3554 *flash = to_lm3554(sd);
 943         int ret;
 944
 945         media_entity_cleanup(&flash->sd.entity);
 946         v4l2_ctrl_handler_free(&flash->ctrl_handler);
 947         v4l2_device_unregister_subdev(sd);
 948
 949         atomisp_gmin_remove_subdev(sd);
 950
 951         del_timer_sync(&flash->flash_off_delay);
 952
 953         ret = lm3554_gpio_uninit(client);
 954         if (ret < 0)
 955                 goto fail;
 956
 957         kfree(flash);
 958
 959         return 0;
 960 fail:
 961         dev_err(&client->dev, "gpio request/direction_output fail");
 962         return ret;
 963 }
 964
 965 static const struct i2c_device_id lm3554_id[] = {
 966         {LM3554_NAME, 0},
 967         {},
 968 };
 969
 970 MODULE_DEVICE_TABLE(i2c, lm3554_id);
 971
 972 static const struct dev_pm_ops lm3554_pm_ops = {
 973         .suspend = lm3554_suspend,
 974         .resume = lm3554_resume,
 975 };
 976
 977 static struct acpi_device_id lm3554_acpi_match[] = {
 978         { "INTCF1C" },
 979         {},
 980 };
 981
 982 MODULE_DEVICE_TABLE(acpi, lm3554_acpi_match);
 983
 984 static struct i2c_driver lm3554_driver = {
 985         .driver = {
 986                 .name = LM3554_NAME,
 987                 .pm   = &lm3554_pm_ops,
 988                 .acpi_match_table = ACPI_PTR(lm3554_acpi_match),
 989         },
 990         .probe = lm3554_probe,
 991         .remove = lm3554_remove,
 992         .id_table = lm3554_id,
 993 };
 994
 995 static __init int init_lm3554(void)
 996 {
 997         return i2c_add_driver(&lm3554_driver);
 998 }
 999
1000 static __exit void exit_lm3554(void)
1001 {
1002         i2c_del_driver(&lm3554_driver);
1003 }
1004
1005 module_init(init_lm3554);
1006 module_exit(exit_lm3554);
1007 MODULE_AUTHOR("Jing Tao <jing.tao@intel.com>");
1008 MODULE_DESCRIPTION("LED flash driver for LM3554");
1009 MODULE_LICENSE("GPL");