drivers/usb/otg/twl4030-usb.c

   1 /*
   2  * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
   3  *
   4  * Copyright (C) 2004-2007 Texas Instruments
   5  * Copyright (C) 2008 Nokia Corporation
   6  * Contact: Felipe Balbi <felipe.balbi@nokia.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  *
  22  * Current status:
  23  *      - HS USB ULPI mode works.
  24  *      - 3-pin mode support may be added in future.
  25  */
  26
  27 #include <linux/module.h>
  28 #include <linux/init.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/spinlock.h>
  32 #include <linux/workqueue.h>
  33 #include <linux/io.h>
  34 #include <linux/delay.h>
  35 #include <linux/usb/otg.h>
  36 #include <linux/usb/musb-omap.h>
  37 #include <linux/usb/ulpi.h>
  38 #include <linux/i2c/twl.h>
  39 #include <linux/regulator/consumer.h>
  40 #include <linux/err.h>
  41 #include <linux/slab.h>
  42
  43 /* Register defines */
  44
  45 #define MCPC_CTRL                       0x30
  46 #define MCPC_CTRL_RTSOL                 (1 << 7)
  47 #define MCPC_CTRL_EXTSWR                (1 << 6)
  48 #define MCPC_CTRL_EXTSWC                (1 << 5)
  49 #define MCPC_CTRL_VOICESW               (1 << 4)
  50 #define MCPC_CTRL_OUT64K                (1 << 3)
  51 #define MCPC_CTRL_RTSCTSSW              (1 << 2)
  52 #define MCPC_CTRL_HS_UART               (1 << 0)
  53
  54 #define MCPC_IO_CTRL                    0x33
  55 #define MCPC_IO_CTRL_MICBIASEN          (1 << 5)
  56 #define MCPC_IO_CTRL_CTS_NPU            (1 << 4)
  57 #define MCPC_IO_CTRL_RXD_PU             (1 << 3)
  58 #define MCPC_IO_CTRL_TXDTYP             (1 << 2)
  59 #define MCPC_IO_CTRL_CTSTYP             (1 << 1)
  60 #define MCPC_IO_CTRL_RTSTYP             (1 << 0)
  61
  62 #define MCPC_CTRL2                      0x36
  63 #define MCPC_CTRL2_MCPC_CK_EN           (1 << 0)
  64
  65 #define OTHER_FUNC_CTRL                 0x80
  66 #define OTHER_FUNC_CTRL_BDIS_ACON_EN    (1 << 4)
  67 #define OTHER_FUNC_CTRL_FIVEWIRE_MODE   (1 << 2)
  68
  69 #define OTHER_IFC_CTRL                  0x83
  70 #define OTHER_IFC_CTRL_OE_INT_EN        (1 << 6)
  71 #define OTHER_IFC_CTRL_CEA2011_MODE     (1 << 5)
  72 #define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN      (1 << 4)
  73 #define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT       (1 << 3)
  74 #define OTHER_IFC_CTRL_HIZ_ULPI         (1 << 2)
  75 #define OTHER_IFC_CTRL_ALT_INT_REROUTE  (1 << 0)
  76
  77 #define OTHER_INT_EN_RISE               0x86
  78 #define OTHER_INT_EN_FALL               0x89
  79 #define OTHER_INT_STS                   0x8C
  80 #define OTHER_INT_LATCH                 0x8D
  81 #define OTHER_INT_VB_SESS_VLD           (1 << 7)
  82 #define OTHER_INT_DM_HI                 (1 << 6) /* not valid for "latch" reg */
  83 #define OTHER_INT_DP_HI                 (1 << 5) /* not valid for "latch" reg */
  84 #define OTHER_INT_BDIS_ACON             (1 << 3) /* not valid for "fall" regs */
  85 #define OTHER_INT_MANU                  (1 << 1)
  86 #define OTHER_INT_ABNORMAL_STRESS       (1 << 0)
  87
  88 #define ID_STATUS                       0x96
  89 #define ID_RES_FLOAT                    (1 << 4)
  90 #define ID_RES_440K                     (1 << 3)
  91 #define ID_RES_200K                     (1 << 2)
  92 #define ID_RES_102K                     (1 << 1)
  93 #define ID_RES_GND                      (1 << 0)
  94
  95 #define POWER_CTRL                      0xAC
  96 #define POWER_CTRL_OTG_ENAB             (1 << 5)
  97
  98 #define OTHER_IFC_CTRL2                 0xAF
  99 #define OTHER_IFC_CTRL2_ULPI_STP_LOW    (1 << 4)
 100 #define OTHER_IFC_CTRL2_ULPI_TXEN_POL   (1 << 3)
 101 #define OTHER_IFC_CTRL2_ULPI_4PIN_2430  (1 << 2)
 102 #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK     (3 << 0) /* bits 0 and 1 */
 103 #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N    (0 << 0)
 104 #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N    (1 << 0)
 105
 106 #define REG_CTRL_EN                     0xB2
 107 #define REG_CTRL_ERROR                  0xB5
 108 #define ULPI_I2C_CONFLICT_INTEN         (1 << 0)
 109
 110 #define OTHER_FUNC_CTRL2                0xB8
 111 #define OTHER_FUNC_CTRL2_VBAT_TIMER_EN  (1 << 0)
 112
 113 /* following registers do not have separate _clr and _set registers */
 114 #define VBUS_DEBOUNCE                   0xC0
 115 #define ID_DEBOUNCE                     0xC1
 116 #define VBAT_TIMER                      0xD3
 117 #define PHY_PWR_CTRL                    0xFD
 118 #define PHY_PWR_PHYPWD                  (1 << 0)
 119 #define PHY_CLK_CTRL                    0xFE
 120 #define PHY_CLK_CTRL_CLOCKGATING_EN     (1 << 2)
 121 #define PHY_CLK_CTRL_CLK32K_EN          (1 << 1)
 122 #define REQ_PHY_DPLL_CLK                (1 << 0)
 123 #define PHY_CLK_CTRL_STS                0xFF
 124 #define PHY_DPLL_CLK                    (1 << 0)
 125
 126 /* In module TWL_MODULE_PM_MASTER */
 127 #define STS_HW_CONDITIONS               0x0F
 128
 129 /* In module TWL_MODULE_PM_RECEIVER */
 130 #define VUSB_DEDICATED1                 0x7D
 131 #define VUSB_DEDICATED2                 0x7E
 132 #define VUSB1V5_DEV_GRP                 0x71
 133 #define VUSB1V5_TYPE                    0x72
 134 #define VUSB1V5_REMAP                   0x73
 135 #define VUSB1V8_DEV_GRP                 0x74
 136 #define VUSB1V8_TYPE                    0x75
 137 #define VUSB1V8_REMAP                   0x76
 138 #define VUSB3V1_DEV_GRP                 0x77
 139 #define VUSB3V1_TYPE                    0x78
 140 #define VUSB3V1_REMAP                   0x79
 141
 142 /* In module TWL4030_MODULE_INTBR */
 143 #define PMBR1                           0x0D
 144 #define GPIO_USB_4PIN_ULPI_2430C        (3 << 0)
 145
 146 struct twl4030_usb {
 147         struct usb_phy          phy;
 148         struct device           *dev;
 149
 150         /* TWL4030 internal USB regulator supplies */
 151         struct regulator        *usb1v5;
 152         struct regulator        *usb1v8;
 153         struct regulator        *usb3v1;
 154
 155         /* for vbus reporting with irqs disabled */
 156         spinlock_t              lock;
 157
 158         /* pin configuration */
 159         enum twl4030_usb_mode   usb_mode;
 160
 161         int                     irq;
 162         enum omap_musb_vbus_id_status linkstat;
 163         bool                    vbus_supplied;
 164         u8                      asleep;
 165         bool                    irq_enabled;
 166 };
 167
 168 /* internal define on top of container_of */
 169 #define phy_to_twl(x)           container_of((x), struct twl4030_usb, phy)
 170
 171 /*-------------------------------------------------------------------------*/
 172
 173 static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
 174                 u8 module, u8 data, u8 address)
 175 {
 176         u8 check;
 177
 178         if ((twl_i2c_write_u8(module, data, address) >= 0) &&
 179             (twl_i2c_read_u8(module, &check, address) >= 0) &&
 180                                                 (check == data))
 181                 return 0;
 182         dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
 183                         1, module, address, check, data);
 184
 185         /* Failed once: Try again */
 186         if ((twl_i2c_write_u8(module, data, address) >= 0) &&
 187             (twl_i2c_read_u8(module, &check, address) >= 0) &&
 188                                                 (check == data))
 189                 return 0;
 190         dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
 191                         2, module, address, check, data);
 192
 193         /* Failed again: Return error */
 194         return -EBUSY;
 195 }
 196
 197 #define twl4030_usb_write_verify(twl, address, data)    \
 198         twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
 199
 200 static inline int twl4030_usb_write(struct twl4030_usb *twl,
 201                 u8 address, u8 data)
 202 {
 203         int ret = 0;
 204
 205         ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
 206         if (ret < 0)
 207                 dev_dbg(twl->dev,
 208                         "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
 209         return ret;
 210 }
 211
 212 static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
 213 {
 214         u8 data;
 215         int ret = 0;
 216
 217         ret = twl_i2c_read_u8(module, &data, address);
 218         if (ret >= 0)
 219                 ret = data;
 220         else
 221                 dev_dbg(twl->dev,
 222                         "TWL4030:readb[0x%x,0x%x] Error %d\n",
 223                                         module, address, ret);
 224
 225         return ret;
 226 }
 227
 228 static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
 229 {
 230         return twl4030_readb(twl, TWL_MODULE_USB, address);
 231 }
 232
 233 /*-------------------------------------------------------------------------*/
 234
 235 static inline int
 236 twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 237 {
 238         return twl4030_usb_write(twl, ULPI_SET(reg), bits);
 239 }
 240
 241 static inline int
 242 twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 243 {
 244         return twl4030_usb_write(twl, ULPI_CLR(reg), bits);
 245 }
 246
 247 /*-------------------------------------------------------------------------*/
 248
 249 static enum omap_musb_vbus_id_status
 250         twl4030_usb_linkstat(struct twl4030_usb *twl)
 251 {
 252         int     status;
 253         enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
 254
 255         twl->vbus_supplied = false;
 256
 257         /*
 258          * For ID/VBUS sensing, see manual section 15.4.8 ...
 259          * except when using only battery backup power, two
 260          * comparators produce VBUS_PRES and ID_PRES signals,
 261          * which don't match docs elsewhere.  But ... BIT(7)
 262          * and BIT(2) of STS_HW_CONDITIONS, respectively, do
 263          * seem to match up.  If either is true the USB_PRES
 264          * signal is active, the OTG module is activated, and
 265          * its interrupt may be raised (may wake the system).
 266          */
 267         status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
 268         if (status < 0)
 269                 dev_err(twl->dev, "USB link status err %d\n", status);
 270         else if (status & (BIT(7) | BIT(2))) {
 271                 if (status & (BIT(7)))
 272                         twl->vbus_supplied = true;
 273
 274                 if (status & BIT(2))
 275                         linkstat = OMAP_MUSB_ID_GROUND;
 276                 else
 277                         linkstat = OMAP_MUSB_VBUS_VALID;
 278         } else {
 279                 if (twl->linkstat != OMAP_MUSB_UNKNOWN)
 280                         linkstat = OMAP_MUSB_VBUS_OFF;
 281         }
 282
 283         dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
 284                         status, status, linkstat);
 285
 286         /* REVISIT this assumes host and peripheral controllers
 287          * are registered, and that both are active...
 288          */
 289
 290         spin_lock_irq(&twl->lock);
 291         twl->linkstat = linkstat;
 292         spin_unlock_irq(&twl->lock);
 293
 294         return linkstat;
 295 }
 296
 297 static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
 298 {
 299         twl->usb_mode = mode;
 300
 301         switch (mode) {
 302         case T2_USB_MODE_ULPI:
 303                 twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL,
 304                                         ULPI_IFC_CTRL_CARKITMODE);
 305                 twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 306                 twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL,
 307                                         ULPI_FUNC_CTRL_XCVRSEL_MASK |
 308                                         ULPI_FUNC_CTRL_OPMODE_MASK);
 309                 break;
 310         case -1:
 311                 /* FIXME: power on defaults */
 312                 break;
 313         default:
 314                 dev_err(twl->dev, "unsupported T2 transceiver mode %d\n",
 315                                 mode);
 316                 break;
 317         };
 318 }
 319
 320 static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
 321 {
 322         unsigned long timeout;
 323         int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
 324
 325         if (val >= 0) {
 326                 if (on) {
 327                         /* enable DPLL to access PHY registers over I2C */
 328                         val |= REQ_PHY_DPLL_CLK;
 329                         WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
 330                                                 (u8)val) < 0);
 331
 332                         timeout = jiffies + HZ;
 333                         while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
 334                                                         PHY_DPLL_CLK)
 335                                 && time_before(jiffies, timeout))
 336                                         udelay(10);
 337                         if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
 338                                                         PHY_DPLL_CLK))
 339                                 dev_err(twl->dev, "Timeout setting T2 HSUSB "
 340                                                 "PHY DPLL clock\n");
 341                 } else {
 342                         /* let ULPI control the DPLL clock */
 343                         val &= ~REQ_PHY_DPLL_CLK;
 344                         WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
 345                                                 (u8)val) < 0);
 346                 }
 347         }
 348 }
 349
 350 static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 351 {
 352         u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
 353
 354         if (on)
 355                 pwr &= ~PHY_PWR_PHYPWD;
 356         else
 357                 pwr |= PHY_PWR_PHYPWD;
 358
 359         WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
 360 }
 361
 362 static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 363 {
 364         if (on) {
 365                 regulator_enable(twl->usb3v1);
 366                 regulator_enable(twl->usb1v8);
 367                 /*
 368                  * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
 369                  * in twl4030) resets the VUSB_DEDICATED2 register. This reset
 370                  * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
 371                  * SLEEP. We work around this by clearing the bit after usv3v1
 372                  * is re-activated. This ensures that VUSB3V1 is really active.
 373                  */
 374                 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
 375                 regulator_enable(twl->usb1v5);
 376                 __twl4030_phy_power(twl, 1);
 377                 twl4030_usb_write(twl, PHY_CLK_CTRL,
 378                                   twl4030_usb_read(twl, PHY_CLK_CTRL) |
 379                                         (PHY_CLK_CTRL_CLOCKGATING_EN |
 380                                                 PHY_CLK_CTRL_CLK32K_EN));
 381         } else {
 382                 __twl4030_phy_power(twl, 0);
 383                 regulator_disable(twl->usb1v5);
 384                 regulator_disable(twl->usb1v8);
 385                 regulator_disable(twl->usb3v1);
 386         }
 387 }
 388
 389 static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
 390 {
 391         if (twl->asleep)
 392                 return;
 393
 394         twl4030_phy_power(twl, 0);
 395         twl->asleep = 1;
 396         dev_dbg(twl->dev, "%s\n", __func__);
 397 }
 398
 399 static void __twl4030_phy_resume(struct twl4030_usb *twl)
 400 {
 401         twl4030_phy_power(twl, 1);
 402         twl4030_i2c_access(twl, 1);
 403         twl4030_usb_set_mode(twl, twl->usb_mode);
 404         if (twl->usb_mode == T2_USB_MODE_ULPI)
 405                 twl4030_i2c_access(twl, 0);
 406 }
 407
 408 static void twl4030_phy_resume(struct twl4030_usb *twl)
 409 {
 410         if (!twl->asleep)
 411                 return;
 412         __twl4030_phy_resume(twl);
 413         twl->asleep = 0;
 414         dev_dbg(twl->dev, "%s\n", __func__);
 415 }
 416
 417 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 418 {
 419         /* Enable writing to power configuration registers */
 420         twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
 421                          TWL4030_PM_MASTER_PROTECT_KEY);
 422
 423         twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
 424                          TWL4030_PM_MASTER_PROTECT_KEY);
 425
 426         /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
 427         /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
 428
 429         /* input to VUSB3V1 LDO is from VBAT, not VBUS */
 430         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 431
 432         /* Initialize 3.1V regulator */
 433         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 434
 435         twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
 436         if (IS_ERR(twl->usb3v1))
 437                 return -ENODEV;
 438
 439         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 440
 441         /* Initialize 1.5V regulator */
 442         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 443
 444         twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
 445         if (IS_ERR(twl->usb1v5))
 446                 goto fail1;
 447
 448         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 449
 450         /* Initialize 1.8V regulator */
 451         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 452
 453         twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
 454         if (IS_ERR(twl->usb1v8))
 455                 goto fail2;
 456
 457         twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 458
 459         /* disable access to power configuration registers */
 460         twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
 461                          TWL4030_PM_MASTER_PROTECT_KEY);
 462
 463         return 0;
 464
 465 fail2:
 466         regulator_put(twl->usb1v5);
 467         twl->usb1v5 = NULL;
 468 fail1:
 469         regulator_put(twl->usb3v1);
 470         twl->usb3v1 = NULL;
 471         return -ENODEV;
 472 }
 473
 474 static ssize_t twl4030_usb_vbus_show(struct device *dev,
 475                 struct device_attribute *attr, char *buf)
 476 {
 477         struct twl4030_usb *twl = dev_get_drvdata(dev);
 478         unsigned long flags;
 479         int ret = -EINVAL;
 480
 481         spin_lock_irqsave(&twl->lock, flags);
 482         ret = sprintf(buf, "%s\n",
 483                         twl->vbus_supplied ? "on" : "off");
 484         spin_unlock_irqrestore(&twl->lock, flags);
 485
 486         return ret;
 487 }
 488 static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
 489
 490 static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 491 {
 492         struct twl4030_usb *twl = _twl;
 493         enum omap_musb_vbus_id_status status;
 494
 495         status = twl4030_usb_linkstat(twl);
 496         if (status > 0) {
 497                 /* FIXME add a set_power() method so that B-devices can
 498                  * configure the charger appropriately.  It's not always
 499                  * correct to consume VBUS power, and how much current to
 500                  * consume is a function of the USB configuration chosen
 501                  * by the host.
 502                  *
 503                  * REVISIT usb_gadget_vbus_connect(...) as needed, ditto
 504                  * its disconnect() sibling, when changing to/from the
 505                  * USB_LINK_VBUS state.  musb_hdrc won't care until it
 506                  * starts to handle softconnect right.
 507                  */
 508                 if (status == OMAP_MUSB_VBUS_OFF ||
 509                                 status == OMAP_MUSB_ID_FLOAT)
 510                         twl4030_phy_suspend(twl, 0);
 511                 else
 512                         twl4030_phy_resume(twl);
 513
 514                 omap_musb_mailbox(twl->linkstat);
 515         }
 516         sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 517
 518         return IRQ_HANDLED;
 519 }
 520
 521 static void twl4030_usb_phy_init(struct twl4030_usb *twl)
 522 {
 523         enum omap_musb_vbus_id_status status;
 524
 525         status = twl4030_usb_linkstat(twl);
 526         if (status > 0) {
 527                 if (status == OMAP_MUSB_VBUS_OFF ||
 528                                 status == OMAP_MUSB_ID_FLOAT) {
 529                         __twl4030_phy_power(twl, 0);
 530                         twl->asleep = 1;
 531                 } else {
 532                         __twl4030_phy_resume(twl);
 533                         twl->asleep = 0;
 534                 }
 535
 536                 omap_musb_mailbox(twl->linkstat);
 537         }
 538         sysfs_notify(&twl->dev->kobj, NULL, "vbus");
 539 }
 540
 541 static int twl4030_set_suspend(struct usb_phy *x, int suspend)
 542 {
 543         struct twl4030_usb *twl = phy_to_twl(x);
 544
 545         if (suspend)
 546                 twl4030_phy_suspend(twl, 1);
 547         else
 548                 twl4030_phy_resume(twl);
 549
 550         return 0;
 551 }
 552
 553 static int twl4030_set_peripheral(struct usb_otg *otg,
 554                                         struct usb_gadget *gadget)
 555 {
 556         if (!otg)
 557                 return -ENODEV;
 558
 559         otg->gadget = gadget;
 560         if (!gadget)
 561                 otg->phy->state = OTG_STATE_UNDEFINED;
 562
 563         return 0;
 564 }
 565
 566 static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
 567 {
 568         if (!otg)
 569                 return -ENODEV;
 570
 571         otg->host = host;
 572         if (!host)
 573                 otg->phy->state = OTG_STATE_UNDEFINED;
 574
 575         return 0;
 576 }
 577
 578 static int twl4030_usb_probe(struct platform_device *pdev)
 579 {
 580         struct twl4030_usb_data *pdata = pdev->dev.platform_data;
 581         struct twl4030_usb      *twl;
 582         int                     status, err;
 583         struct usb_otg          *otg;
 584         struct device_node      *np = pdev->dev.of_node;
 585
 586         twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
 587         if (!twl)
 588                 return -ENOMEM;
 589
 590         if (np)
 591                 of_property_read_u32(np, "usb_mode",
 592                                 (enum twl4030_usb_mode *)&twl->usb_mode);
 593         else if (pdata)
 594                 twl->usb_mode = pdata->usb_mode;
 595         else {
 596                 dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
 597                 return -EINVAL;
 598         }
 599
 600         otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL);
 601         if (!otg)
 602                 return -ENOMEM;
 603
 604         twl->dev                = &pdev->dev;
 605         twl->irq                = platform_get_irq(pdev, 0);
 606         twl->vbus_supplied      = false;
 607         twl->asleep             = 1;
 608         twl->linkstat           = OMAP_MUSB_UNKNOWN;
 609
 610         twl->phy.dev            = twl->dev;
 611         twl->phy.label          = "twl4030";
 612         twl->phy.otg            = otg;
 613         twl->phy.type           = USB_PHY_TYPE_USB2;
 614         twl->phy.set_suspend    = twl4030_set_suspend;
 615
 616         otg->phy                = &twl->phy;
 617         otg->set_host           = twl4030_set_host;
 618         otg->set_peripheral     = twl4030_set_peripheral;
 619
 620         /* init spinlock for workqueue */
 621         spin_lock_init(&twl->lock);
 622
 623         err = twl4030_usb_ldo_init(twl);
 624         if (err) {
 625                 dev_err(&pdev->dev, "ldo init failed\n");
 626                 return err;
 627         }
 628         usb_add_phy_dev(&twl->phy);
 629
 630         platform_set_drvdata(pdev, twl);
 631         if (device_create_file(&pdev->dev, &dev_attr_vbus))
 632                 dev_warn(&pdev->dev, "could not create sysfs file\n");
 633
 634         /* Our job is to use irqs and status from the power module
 635          * to keep the transceiver disabled when nothing's connected.
 636          *
 637          * FIXME we actually shouldn't start enabling it until the
 638          * USB controller drivers have said they're ready, by calling
 639          * set_host() and/or set_peripheral() ... OTG_capable boards
 640          * need both handles, otherwise just one suffices.
 641          */
 642         twl->irq_enabled = true;
 643         status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
 644                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
 645                         IRQF_ONESHOT, "twl4030_usb", twl);
 646         if (status < 0) {
 647                 dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
 648                         twl->irq, status);
 649                 return status;
 650         }
 651
 652         /* Power down phy or make it work according to
 653          * current link state.
 654          */
 655         twl4030_usb_phy_init(twl);
 656
 657         dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
 658         return 0;
 659 }
 660
 661 static int __exit twl4030_usb_remove(struct platform_device *pdev)
 662 {
 663         struct twl4030_usb *twl = platform_get_drvdata(pdev);
 664         int val;
 665
 666         free_irq(twl->irq, twl);
 667         device_remove_file(twl->dev, &dev_attr_vbus);
 668
 669         /* set transceiver mode to power on defaults */
 670         twl4030_usb_set_mode(twl, -1);
 671
 672         /* autogate 60MHz ULPI clock,
 673          * clear dpll clock request for i2c access,
 674          * disable 32KHz
 675          */
 676         val = twl4030_usb_read(twl, PHY_CLK_CTRL);
 677         if (val >= 0) {
 678                 val |= PHY_CLK_CTRL_CLOCKGATING_EN;
 679                 val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
 680                 twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
 681         }
 682
 683         /* disable complete OTG block */
 684         twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 685
 686         if (!twl->asleep)
 687                 twl4030_phy_power(twl, 0);
 688         regulator_put(twl->usb1v5);
 689         regulator_put(twl->usb1v8);
 690         regulator_put(twl->usb3v1);
 691
 692         return 0;
 693 }
 694
 695 #ifdef CONFIG_OF
 696 static const struct of_device_id twl4030_usb_id_table[] = {
 697         { .compatible = "ti,twl4030-usb" },
 698         {}
 699 };
 700 MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
 701 #endif
 702
 703 static struct platform_driver twl4030_usb_driver = {
 704         .probe          = twl4030_usb_probe,
 705         .remove         = __exit_p(twl4030_usb_remove),
 706         .driver         = {
 707                 .name   = "twl4030_usb",
 708                 .owner  = THIS_MODULE,
 709                 .of_match_table = of_match_ptr(twl4030_usb_id_table),
 710         },
 711 };
 712
 713 static int __init twl4030_usb_init(void)
 714 {
 715         return platform_driver_register(&twl4030_usb_driver);
 716 }
 717 subsys_initcall(twl4030_usb_init);
 718
 719 static void __exit twl4030_usb_exit(void)
 720 {
 721         platform_driver_unregister(&twl4030_usb_driver);
 722 }
 723 module_exit(twl4030_usb_exit);
 724
 725 MODULE_ALIAS("platform:twl4030_usb");
 726 MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
 727 MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
 728 MODULE_LICENSE("GPL");