include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /* SPL */
  11 #define CONFIG_SPL_NAND_SUPPORT
  12 #define CONFIG_SPL_MMC_SUPPORT
  13 #define CONFIG_SPL_FAT_SUPPORT
  14 /*
  15 #define CONFIG_SPL_SATA_SUPPORT
  16 */
  17 /* Location in NAND to read U-Boot from */
  18 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
  19
  20 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
  21 #include "mx6_common.h"
  22 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  23 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  24
  25 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  26
  27 #include <asm/arch/imx-regs.h>
  28 #include <asm/imx-common/gpio.h>
  29
  30 /* ATAGs */
  31 #define CONFIG_CMDLINE_TAG
  32 #define CONFIG_SETUP_MEMORY_TAGS
  33 #define CONFIG_INITRD_TAG
  34 #define CONFIG_SERIAL_TAG
  35 #define CONFIG_REVISION_TAG
  36
  37 #define CONFIG_SYS_GENERIC_BOARD
  38
  39 /* Size of malloc() pool */
  40 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  41
  42 /* Init Functions */
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_MISC_INIT_R
  45
  46 /* GPIO */
  47 #define CONFIG_MXC_GPIO
  48
  49 /* Serial */
  50 #define CONFIG_MXC_UART
  51 #define CONFIG_MXC_UART_BASE           UART2_BASE
  52
  53 #ifdef CONFIG_SPI_FLASH
  54
  55 /* SPI */
  56 #define CONFIG_CMD_SF
  57 #ifdef CONFIG_CMD_SF
  58   #define CONFIG_MXC_SPI
  59   #define CONFIG_SPI_FLASH_MTD
  60   #define CONFIG_SPI_FLASH_BAR
  61   #define CONFIG_SPI_FLASH_WINBOND
  62   #define CONFIG_SF_DEFAULT_BUS              0
  63   #define CONFIG_SF_DEFAULT_CS               0
  64                                              /* GPIO 3-19 (21248) */
  65   #define CONFIG_SF_DEFAULT_SPEED            30000000
  66   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  67 #endif
  68
  69 #else
  70 /* Enable NAND support */
  71 #define CONFIG_CMD_TIME
  72 #define CONFIG_CMD_NAND
  73 #define CONFIG_CMD_NAND_TRIMFFS
  74 #ifdef CONFIG_CMD_NAND
  75   #define CONFIG_NAND_MXS
  76   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  77   #define CONFIG_SYS_NAND_BASE          0x40000000
  78   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  79   #define CONFIG_SYS_NAND_ONFI_DETECTION
  80
  81   /* DMA stuff, needed for GPMI/MXS NAND support */
  82   #define CONFIG_APBH_DMA
  83   #define CONFIG_APBH_DMA_BURST
  84   #define CONFIG_APBH_DMA_BURST8
  85 #endif
  86
  87 #endif /* CONFIG_SPI_FLASH */
  88
  89 /* Flattened Image Tree Suport */
  90 #define CONFIG_FIT
  91 #define CONFIG_FIT_VERBOSE
  92
  93 /* I2C Configs */
  94 #define CONFIG_CMD_I2C
  95 #define CONFIG_SYS_I2C
  96 #define CONFIG_SYS_I2C_MXC
  97 #define CONFIG_SYS_I2C_SPEED            100000
  98 #define CONFIG_I2C_GSC                  0
  99 #define CONFIG_I2C_PMIC                 1
 100 #define CONFIG_I2C_EDID
 101
 102 /* MMC Configs */
 103 #define CONFIG_FSL_ESDHC
 104 #define CONFIG_FSL_USDHC
 105 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 106 #define CONFIG_SYS_FSL_USDHC_NUM       1
 107 #define CONFIG_MMC
 108 #define CONFIG_CMD_MMC
 109 #define CONFIG_GENERIC_MMC
 110 #define CONFIG_BOUNCE_BUFFER
 111
 112 /* Filesystem support */
 113 #define CONFIG_CMD_EXT2
 114 #define CONFIG_CMD_EXT4
 115 #define CONFIG_CMD_EXT4_WRITE
 116 #define CONFIG_CMD_FAT
 117 #define CONFIG_CMD_UBIFS
 118 #define CONFIG_DOS_PARTITION
 119
 120 /*
 121  * SATA Configs
 122  */
 123 #define CONFIG_CMD_SATA
 124 #ifdef CONFIG_CMD_SATA
 125   #define CONFIG_DWC_AHSATA
 126   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 127   #define CONFIG_DWC_AHSATA_PORT_ID     0
 128   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 129   #define CONFIG_LBA48
 130   #define CONFIG_LIBATA
 131 #endif
 132
 133 /*
 134  * PCI express
 135  */
 136 #define CONFIG_CMD_PCI
 137 #ifdef CONFIG_CMD_PCI
 138 #define CONFIG_PCI
 139 #define CONFIG_PCI_PNP
 140 #define CONFIG_PCI_SCAN_SHOW
 141 #define CONFIG_PCI_FIXUP_DEV
 142 #define CONFIG_PCIE_IMX
 143 #endif
 144
 145 /*
 146  * PMIC
 147  */
 148 #define CONFIG_POWER
 149 #define CONFIG_POWER_I2C
 150 #define CONFIG_POWER_PFUZE100
 151 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 152 #define CONFIG_POWER_LTC3676
 153 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 154
 155 /* Various command support */
 156 #include <config_cmd_default.h>
 157 #undef CONFIG_CMD_IMLS
 158 #define CONFIG_CMD_PING
 159 #define CONFIG_CMD_DHCP
 160 #define CONFIG_CMD_MII
 161 #define CONFIG_CMD_NET
 162 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 163 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 164 #define CONFIG_CMD_SETEXPR
 165 #define CONFIG_CMD_BOOTZ
 166 #define CONFIG_CMD_GSC
 167 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 168 #define CONFIG_CMD_UBI
 169 #define CONFIG_RBTREE
 170 #define CONFIG_LZO
 171 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 172 #ifdef CONFIG_CMD_FUSE
 173 #define CONFIG_MXC_OCOTP
 174 #endif
 175
 176
 177 /* Ethernet support */
 178 #define CONFIG_FEC_MXC
 179 #define CONFIG_E1000
 180 #define CONFIG_MII
 181 #define IMX_FEC_BASE             ENET_BASE_ADDR
 182 #define CONFIG_FEC_XCV_TYPE      RGMII
 183 #define CONFIG_FEC_MXC_PHYADDR   0
 184 #define CONFIG_PHYLIB
 185 #define CONFIG_ARP_TIMEOUT       200UL
 186
 187 /* USB Configs */
 188 #define CONFIG_CMD_USB
 189 #define CONFIG_USB_EHCI
 190 #define CONFIG_USB_EHCI_MX6
 191 #define CONFIG_USB_STORAGE
 192 #define CONFIG_USB_HOST_ETHER
 193 #define CONFIG_USB_ETHER_ASIX
 194 #define CONFIG_USB_ETHER_SMSC95XX
 195 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 196 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 197 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 198 #define CONFIG_MXC_USB_FLAGS      0
 199 #define CONFIG_USB_KEYBOARD
 200 #define CONFIG_CI_UDC
 201 #define CONFIG_USBD_HS
 202 #define CONFIG_USB_GADGET_DUALSPEED
 203 #define CONFIG_USB_ETHER
 204 #define CONFIG_USB_ETH_CDC
 205 #define CONFIG_NETCONSOLE
 206 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 207
 208 /* USB Mass Storage Gadget */
 209 #define CONFIG_USB_GADGET
 210 #define CONFIG_CMD_USB_MASS_STORAGE
 211 #define CONFIG_USB_GADGET_MASS_STORAGE
 212 #define CONFIG_USBDOWNLOAD_GADGET
 213 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 214
 215 /* Netchip IDs */
 216 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 217 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 218 #define CONFIG_G_DNL_MANUFACTURER "Gateworks"
 219
 220 /* Framebuffer and LCD */
 221 #define CONFIG_VIDEO
 222 #define CONFIG_VIDEO_IPUV3
 223 #define CONFIG_CFB_CONSOLE
 224 #define CONFIG_VGA_AS_SINGLE_DEVICE
 225 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 226 #define CONFIG_VIDEO_BMP_RLE8
 227 #define CONFIG_SPLASH_SCREEN
 228 #define CONFIG_BMP_16BPP
 229 #define CONFIG_VIDEO_LOGO
 230 #define CONFIG_IPUV3_CLK          260000000
 231 #define CONFIG_CMD_HDMIDETECT
 232 #define CONFIG_CONSOLE_MUX
 233 #define CONFIG_IMX_HDMI
 234 #define CONFIG_IMX_VIDEO_SKIP
 235
 236 /* serial console (ttymxc1,115200) */
 237 #define CONFIG_CONS_INDEX              1
 238 #define CONFIG_BAUDRATE                115200
 239
 240 /* Miscellaneous configurable options */
 241 #define CONFIG_SYS_LONGHELP
 242 #define CONFIG_SYS_HUSH_PARSER
 243 #define CONFIG_SYS_PROMPT                    "Ventana > "
 244 #define CONFIG_SYS_CBSIZE                    1024
 245 #define CONFIG_AUTO_COMPLETE
 246 #define CONFIG_CMDLINE_EDITING
 247 #define CONFIG_HWCONFIG
 248
 249 /* Print Buffer Size */
 250 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 251 #define CONFIG_SYS_MAXARGS                 16
 252 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 253
 254 /* Memory configuration */
 255 #define CONFIG_SYS_MEMTEST_START       0x10000000
 256 #define CONFIG_SYS_MEMTEST_END         0x10010000
 257 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 258 #define CONFIG_SYS_TEXT_BASE             0x17800000
 259 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 260
 261 /* Physical Memory Map */
 262 #define CONFIG_NR_DRAM_BANKS           1
 263 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 264 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 265 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 266 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 267
 268 #define CONFIG_SYS_INIT_SP_OFFSET \
 269         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 270 #define CONFIG_SYS_INIT_SP_ADDR \
 271         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 272
 273 /* FLASH and environment organization */
 274 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 275
 276 /*
 277  * MTD Command for mtdparts
 278  */
 279 #define CONFIG_CMD_MTDPARTS
 280 #define CONFIG_MTD_DEVICE
 281 #define CONFIG_MTD_PARTITIONS
 282 #ifdef CONFIG_SPI_FLASH
 283 #define MTDIDS_DEFAULT    "nor0=nor"
 284 #define MTDPARTS_DEFAULT  \
 285         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 286 #else
 287 #define MTDIDS_DEFAULT    "nand0=nand"
 288 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 289 #endif
 290
 291 /* Persistent Environment Config */
 292 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 293 #ifdef CONFIG_SPI_FLASH
 294 #define CONFIG_ENV_IS_IN_SPI_FLASH
 295 #else
 296 #define CONFIG_ENV_IS_IN_NAND
 297 #endif
 298 #if defined(CONFIG_ENV_IS_IN_MMC)
 299   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 300   #define CONFIG_ENV_SIZE                (8 * 1024)
 301   #define CONFIG_SYS_MMC_ENV_DEV         0
 302 #elif defined(CONFIG_ENV_IS_IN_NAND)
 303   #define CONFIG_ENV_OFFSET              (16 << 20)
 304   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 305   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 306   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 307   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 308 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 309   #define CONFIG_ENV_OFFSET              (512 * 1024)
 310   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 311   #define CONFIG_ENV_SIZE                (8 * 1024)
 312   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 313   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 314   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 315   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 316 #endif
 317
 318 /* Environment */
 319 #define CONFIG_BOOTDELAY          3
 320 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 321 #define CONFIG_IPADDR             192.168.1.1
 322 #define CONFIG_SERVERIP           192.168.1.146
 323 #define HWCONFIG_DEFAULT \
 324         "hwconfig=rs232;" \
 325         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 326
 327 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 328         "usb_pgood_delay=2000\0" \
 329         "console=ttymxc1\0" \
 330         "bootdevs=usb mmc sata flash\0" \
 331         HWCONFIG_DEFAULT \
 332         "video=\0" \
 333         \
 334         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 335         "mtdids=" MTDIDS_DEFAULT "\0" \
 336         \
 337         "fdt_high=0xffffffff\0" \
 338         "fdt_addr=0x18000000\0" \
 339         "initrd_high=0xffffffff\0" \
 340         "loadfdt=" \
 341                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 342                         "echo Loaded DTB from boot/${fdt_file}; " \
 343                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 344                         "echo Loaded DTB from boot/${fdt_file1}; " \
 345                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 346                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 347                 "fi\0" \
 348         \
 349         "script=boot/6x_bootscript-ventana\0" \
 350         "loadscript=" \
 351                 "if ${fsload} ${loadaddr} ${script}; then " \
 352                         "source; " \
 353                 "fi\0" \
 354         \
 355         "uimage=boot/uImage\0" \
 356         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 357         "mmc_boot=" \
 358                 "setenv fsload 'ext2load mmc 0:1'; " \
 359                 "mmc dev 0 && mmc rescan && " \
 360                 "run loadscript; " \
 361                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 362                         "setenv bootargs console=${console},${baudrate} " \
 363                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 364                                 "rootwait rw ${video} ${extra}; " \
 365                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 366                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 367                         "else " \
 368                                 "bootm; " \
 369                         "fi; " \
 370                 "fi\0" \
 371         \
 372         "sata_boot=" \
 373                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 374                 "run loadscript; " \
 375                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 376                         "setenv bootargs console=${console},${baudrate} " \
 377                                 "root=/dev/sda1 rootfstype=ext4 " \
 378                                 "rootwait rw ${video} ${extra}; " \
 379                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 380                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 381                         "else " \
 382                                 "bootm; " \
 383                         "fi; " \
 384                 "fi\0" \
 385         "usb_boot=" \
 386                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 387                 "run loadscript; " \
 388                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 389                         "setenv bootargs console=${console},${baudrate} " \
 390                                 "root=/dev/sda1 rootfstype=ext4 " \
 391                                 "rootwait rw ${video} ${extra}; " \
 392                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 393                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 394                         "else " \
 395                                 "bootm; " \
 396                         "fi; " \
 397                 "fi\0"
 398
 399 #ifdef CONFIG_SPI_FLASH
 400         #define CONFIG_EXTRA_ENV_SETTINGS \
 401         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 402         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 403         "image_uboot=ventana/u-boot_spi.imx\0" \
 404         \
 405         "spi_koffset=0x90000\0" \
 406         "spi_klen=0x200000\0" \
 407         \
 408         "spi_updateuboot=echo Updating uboot from " \
 409                 "${serverip}:${image_uboot}...; " \
 410                 "tftpboot ${loadaddr} ${image_uboot} && " \
 411                 "sf probe && sf erase 0 80000 && " \
 412                         "sf write ${loadaddr} 400 ${filesize}\0" \
 413         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 414                 "to ${spi_koffset} ...; " \
 415                 "tftp ${loadaddr} ${image_os} && " \
 416                 "sf probe && " \
 417                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 418         \
 419         "flash_boot=" \
 420                 "if sf probe && " \
 421                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 422                         "setenv bootargs console=${console},${baudrate} " \
 423                                 "root=/dev/mtdblock3 " \
 424                                 "rootfstype=squashfs,jffs2 " \
 425                                 "${video} ${extra}; " \
 426                         "bootm; " \
 427                 "fi\0"
 428 #else
 429         #define CONFIG_EXTRA_ENV_SETTINGS \
 430         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 431         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 432         \
 433         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 434                 "tftp ${loadaddr} ${image_rootfs} && " \
 435                 "nand erase.part rootfs && " \
 436                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 437         \
 438         "flash_boot=" \
 439                 "setenv fsload 'ubifsload'; " \
 440                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 441                 "run loadscript; " \
 442                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 443                         "setenv bootargs console=${console},${baudrate} " \
 444                                 "root=ubi0:rootfs ubi.mtd=2 " \
 445                                 "rootfstype=ubifs ${video} ${extra}; " \
 446                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 447                                 "ubifsumount; " \
 448                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 449                         "else " \
 450                                 "ubifsumount; bootm; " \
 451                         "fi; " \
 452                 "fi\0"
 453 #endif
 454
 455 #define CONFIG_BOOTCOMMAND \
 456         "for btype in ${bootdevs}; do " \
 457                 "echo; echo Attempting ${btype} boot...; " \
 458                 "if run ${btype}_boot; then; fi; " \
 459         "done"
 460
 461 /* Device Tree Support */
 462 #define CONFIG_OF_BOARD_SETUP
 463 #define CONFIG_OF_LIBFDT
 464 #define CONFIG_FDT_FIXUP_PARTITIONS
 465
 466 #ifndef CONFIG_SYS_DCACHE_OFF
 467   #define CONFIG_CMD_CACHE
 468 #endif
 469
 470 #endif                         /* __CONFIG_H */