include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21 #define CONFIG_MXC_GPIO
  22
  23 #define CONFIG_MXC_UART
  24
  25 #define CONFIG_CMD_FUSE
  26 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  27 #define CONFIG_MXC_OCOTP
  28 #endif
  29
  30 /* MMC Configs */
  31 #define CONFIG_FSL_ESDHC
  32 #define CONFIG_FSL_USDHC
  33 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  34
  35 #define CONFIG_MMC
  36 #define CONFIG_CMD_MMC
  37 #define CONFIG_GENERIC_MMC
  38 #define CONFIG_BOUNCE_BUFFER
  39 #define CONFIG_CMD_EXT2
  40 #define CONFIG_CMD_EXT4
  41 #define CONFIG_CMD_EXT4_WRITE
  42 #define CONFIG_CMD_FAT
  43 #define CONFIG_DOS_PARTITION
  44
  45 #define CONFIG_CMD_PING
  46 #define CONFIG_CMD_DHCP
  47 #define CONFIG_CMD_MII
  48 #define CONFIG_CMD_NET
  49 #define CONFIG_FEC_MXC
  50 #define CONFIG_MII
  51 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  52 #define CONFIG_FEC_XCV_TYPE             RGMII
  53 #define CONFIG_ETHPRIME                 "FEC"
  54 #define CONFIG_FEC_MXC_PHYADDR          1
  55
  56 #define CONFIG_PHYLIB
  57 #define CONFIG_PHY_ATHEROS
  58
  59 #define CONFIG_CMD_SF
  60 #ifdef CONFIG_CMD_SF
  61 #define CONFIG_SPI_FLASH
  62 #define CONFIG_SPI_FLASH_STMICRO
  63 #define CONFIG_MXC_SPI
  64 #define CONFIG_SF_DEFAULT_BUS           0
  65 #define CONFIG_SF_DEFAULT_CS            0
  66 #define CONFIG_SF_DEFAULT_SPEED         20000000
  67 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  68 #endif
  69
  70 /* allow to overwrite serial and ethaddr */
  71 #define CONFIG_ENV_OVERWRITE
  72 #define CONFIG_CONS_INDEX              1
  73 #define CONFIG_BAUDRATE                        115200
  74
  75 /* Command definition */
  76 #define CONFIG_CMD_BMODE
  77 #define CONFIG_CMD_BOOTZ
  78 #define CONFIG_CMD_SETEXPR
  79
  80 #define CONFIG_BOOTDELAY               1
  81
  82 #define CONFIG_LOADADDR                        0x12000000
  83 #define CONFIG_SYS_TEXT_BASE           0x17800000
  84
  85 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  86 #define EMMC_ENV \
  87         "emmcdev=2\0" \
  88         "update_emmc_firmware=" \
  89                 "if test ${ip_dyn} = yes; then " \
  90                         "setenv get_cmd dhcp; " \
  91                 "else " \
  92                         "setenv get_cmd tftp; " \
  93                 "fi; " \
  94                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  95                         "if mmc dev ${emmcdev} 1; then "        \
  96                                 "setexpr fw_sz ${filesize} / 0x200; " \
  97                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  98                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  99                         "fi; "  \
 100                 "fi\0"
 101 #else
 102 #define EMMC_ENV ""
 103 #endif
 104
 105 #ifndef VIDEO_ARGS
 106 #define VIDEO_ARGS ""
 107 #endif
 108
 109 #ifndef VIDEO_ARGS_SCRIPT
 110 #define VIDEO_ARGS_SCRIPT ""
 111 #endif
 112
 113 #define CONFIG_EXTRA_ENV_SETTINGS \
 114         "script=boot.scr\0" \
 115         "image=zImage\0" \
 116         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 117         "fdt_addr=0x18000000\0" \
 118         "boot_fdt=try\0" \
 119         "ip_dyn=yes\0" \
 120         "console=" CONFIG_CONSOLE_DEV "\0" \
 121         "fdt_high=0xffffffff\0"   \
 122         "initrd_high=0xffffffff\0" \
 123         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 124         "mmcpart=1\0" \
 125         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 126         "update_sd_firmware=" \
 127                 "if test ${ip_dyn} = yes; then " \
 128                         "setenv get_cmd dhcp; " \
 129                 "else " \
 130                         "setenv get_cmd tftp; " \
 131                 "fi; " \
 132                 "if mmc dev ${mmcdev}; then "   \
 133                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 134                                 "setexpr fw_sz ${filesize} / 0x200; " \
 135                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 136                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 137                         "fi; "  \
 138                 "fi\0" \
 139         EMMC_ENV          \
 140         "video_args_hdmi=setenv video_args $video_args " \
 141                 "video=mxcfb${fb}:dev=hdmi,1280x720M@60,if=RGB24\0" \
 142         "video_args_lvds=setenv video_args $video_args " \
 143                 "video=mxcfb${fb}:dev=ldb,LDB-XGA,if=RGB666\0" \
 144         "video_args_lcd=setenv video_args $video_args " \
 145                 "video=mxcfb${fb}:dev=lcd,CLAA-WVGA,if=RGB666\0" \
 146         "fb=0\0" \
 147         "video_interfaces=hdmi lvds lcd\0" \
 148         "video_args_script=" \
 149                 "for v in ${video_interfaces}; do " \
 150                         "run video_args_${v}; " \
 151                         "setexpr fb $fb + 1; " \
 152                 "done\0" \
 153         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 154                 "root=${mmcroot} " \
 155                 VIDEO_ARGS "\0" \
 156         "loadbootscript=" \
 157                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 158         "bootscript=echo Running bootscript from mmc ...; " \
 159                 "source\0" \
 160         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 161         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 162         "mmcboot=echo Booting from mmc ...; " \
 163                 VIDEO_ARGS_SCRIPT \
 164                 "run mmcargs; " \
 165                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 166                         "if run loadfdt; then " \
 167                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 168                         "else " \
 169                                 "if test ${boot_fdt} = try; then " \
 170                                         "bootz; " \
 171                                 "else " \
 172                                         "echo WARN: Cannot load the DT; " \
 173                                 "fi; " \
 174                         "fi; " \
 175                 "else " \
 176                         "bootz; " \
 177                 "fi;\0" \
 178         "netargs=setenv bootargs console=${console},${baudrate} " \
 179                 "root=/dev/nfs " \
 180                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 181         "netboot=echo Booting from net ...; " \
 182                 "run netargs; " \
 183                 "if test ${ip_dyn} = yes; then " \
 184                         "setenv get_cmd dhcp; " \
 185                 "else " \
 186                         "setenv get_cmd tftp; " \
 187                 "fi; " \
 188                 "${get_cmd} ${image}; " \
 189                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 190                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 191                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 192                         "else " \
 193                                 "if test ${boot_fdt} = try; then " \
 194                                         "bootz; " \
 195                                 "else " \
 196                                         "echo WARN: Cannot load the DT; " \
 197                                 "fi; " \
 198                         "fi; " \
 199                 "else " \
 200                         "bootz; " \
 201                 "fi;\0"
 202
 203 #define CONFIG_BOOTCOMMAND \
 204         "mmc dev ${mmcdev};" \
 205         "if mmc rescan; then " \
 206                 "if run loadbootscript; then " \
 207                 "run bootscript; " \
 208                 "else " \
 209                         "if run loadimage; then " \
 210                                 "run mmcboot; " \
 211                         "else run netboot; " \
 212                         "fi; " \
 213                 "fi; " \
 214         "else run netboot; fi"
 215
 216 #define CONFIG_ARP_TIMEOUT     200UL
 217
 218 /* Miscellaneous configurable options */
 219 #define CONFIG_SYS_LONGHELP
 220 #define CONFIG_SYS_HUSH_PARSER
 221 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 222 #define CONFIG_AUTO_COMPLETE
 223 #define CONFIG_SYS_CBSIZE              256
 224 #define CONFIG_SYS_MAXARGS             16
 225 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 226
 227 #define CONFIG_SYS_MEMTEST_START       0x10000000
 228 #define CONFIG_SYS_MEMTEST_END         0x10010000
 229 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 230
 231 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 232
 233 #define CONFIG_CMDLINE_EDITING
 234 #define CONFIG_STACKSIZE               (128 * 1024)
 235
 236 /* Physical Memory Map */
 237 #define CONFIG_NR_DRAM_BANKS           1
 238 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 239
 240 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 241 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 242 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 243
 244 #define CONFIG_SYS_INIT_SP_OFFSET \
 245         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 246 #define CONFIG_SYS_INIT_SP_ADDR \
 247         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 248
 249 /* Environment organization */
 250 #define CONFIG_ENV_SIZE                 (8 * 1024)
 251
 252 #define CONFIG_ENV_IS_IN_MMC
 253
 254 #if defined(CONFIG_ENV_IS_IN_MMC)
 255 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 256 #endif
 257
 258 #define CONFIG_OF_LIBFDT
 259
 260 #ifndef CONFIG_SYS_DCACHE_OFF
 261 #define CONFIG_CMD_CACHE
 262 #endif
 263
 264 /* Framebuffer */
 265 #define CONFIG_VIDEO
 266 #define CONFIG_VIDEO_IPUV3
 267 #define CONFIG_CFB_CONSOLE
 268 #define CONFIG_VGA_AS_SINGLE_DEVICE
 269 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 270 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 271 #define CONFIG_VIDEO_BMP_RLE8
 272 #define CONFIG_SPLASH_SCREEN
 273 #define CONFIG_SPLASH_SCREEN_ALIGN
 274 #define CONFIG_BMP_16BPP
 275 #define CONFIG_VIDEO_LOGO
 276 #define CONFIG_VIDEO_BMP_LOGO
 277 #define CONFIG_IPUV3_CLK 260000000
 278 #define CONFIG_IMX_HDMI
 279 #define CONFIG_IMX_VIDEO_SKIP
 280
 281 #ifndef CONFIG_SPL
 282 #define CONFIG_CI_UDC
 283 #define CONFIG_USBD_HS
 284 #define CONFIG_USB_GADGET_DUALSPEED
 285
 286 #define CONFIG_USB_GADGET
 287 #define CONFIG_CMD_USB_MASS_STORAGE
 288 #define CONFIG_USB_GADGET_MASS_STORAGE
 289 #define CONFIG_USBDOWNLOAD_GADGET
 290 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 291
 292 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 293 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 294 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 295 #endif
 296
 297 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */