+* Changed default ramdisk addr in yosemite/yellowstone ports
+ Patch by Stefan Roese, 15 May 2006
+
+* Add support for VirtLab2 board
+ (needed because of differences in the PCMCIA hardware).
+
+* Minor cleanup.
+
+* Update yosemite configuration to enable flash write buffer support
+ Patch by Stefan Roese, 10 May 2006
+
+* Fix compile warnings in common/xyzModem.c
+ Patch by Stefan Roese, 10 May 2006
+
+* Add support for AMCC 440EP Rev C and 440GR Rev B
+ Patch by John Otken, 08 May 2006
+
+* OMAP 5912/OSK: update EMIFS CS1 timings:
+ Problems have been seen in the linux kernel's smc91x network driver
+ due to improper bus timings. The latest 2.6 OMAP kernels currently
+ have a workaround, but this fix belongs in u-boot.
+ Patch by Kevin Hilman, 13 Oct 2005
+
+* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
+ Patch by Hiroki Kaminaga, 11 Mar 2006
+
+* Update omap5912osk board support
+ - Fix OMAP support that omap5912osk compiles in current source tree
+ - Update with code from "http://omap.spectrumdigital.com/osk5912"
+ to fix problems with DDR initialization
+ - Fix timer setup
+ - Use CFI flash driver and support complete 32MB of onboard flash
+ - Add "print_cpuinfo()" and "checkboard()" functions to display
+ CPU (with frequency) and Board infos
+ Patch by Stefan Roese, 10 May 2006
+
+* Fix watchdog issues for ColdFire boards.
+
+* Add M5271EVB board support.
+
+* Make R5200 specific low level initialization board conditional.
+
+* Update CPU target identification strings for ColdFire family.
+
+* Update register definitions for MCF5271.
+
+* Fix serial console support for MCF5271.
+
+* Fixes for gcc 3.4 based m68k toolchain,
+ based on patch by Jate Sujjavanich.
+
+* Fix lowboot support on MCC200 board
+
+* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
+ - Removed MPC8349ADS port
+ - Added PCI support to MPC8349ADS
+ - reworked memory map to allow mapping of all regions with BATs
+ Patch by Kumar Gala, 20 Apr 2006
+
+* Coding Style cleanup
+
+* Write RTC seconds first to maintain settings integrity per
+ Maxim/Dallas DS1306 data sheet.
+ Patch by Alan J. Luse, 02 May 2006
+
+* Scheduled for removal: strnicmp() which is unused
+
+* Update for Intel Monahans boards:
+ - support for magic key detection and handling on delta board
+ - NAND support for zylonite board + some minor cleanup
+
+* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
+ Patch by Jon Loeliger, 01 May 2006
+
+* Fixed handling of bad checksums with "mkimage -l"
+
+* Added support for BC3450 board
+ Patch by Stefan Strobl, 21 Oct 2005
+
+* Update for NC650 board:
+ - Support rev1 and rev2 hardware
+ - adapt to new NAND layer
+ - add CP850 configuration based on NC650
+
+* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
+ is configured; othrwise DMA accesses aren't cache coherent which
+ causes for example USB to fail.
+
+* Some code cleanup
+
+* Fix dbau1x00 boards broken by dbau1550 patch
+ PLL:s were not set for boards other than 1550.
+ Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
+ Default boot is now bootp for cards other than 1550.
+ Patch by Thomas Lange, 10 Aug 2005
+
+* Fixes common/cmd_flash.c:
+ - fix some compiler/parser error, if using m68k tool chain
+ - optical fix for protect on/off all messages, if using more
+ then one bank
+ Patch by Jens Scharsig, 28 Jul 2005
+
+* Fix Quad UART mapping on MCC200 board due to new HW revision
+
+* Fix JFFS2 support for legacy NAND driver.
+
+* Remove dependencies between DoC code and old legacy NAND driver.
+
+* Fix PM828_PCI target, for which PCI was *not* configured in.
+
+* Fix Lite5200B support: initialize SDelay register
+ See Freescale's AN3221 "MPC5200B SDRAM Initialization and
+ Configuration", 3.3.1 SDelay--MBAR + 0x0190
+
+* Changes/fixes for drivers/cfi_flash.c:
+
+ - Add Intel legacy lock/unlock support to common CFI driver
+
+ On some Intel flash's (e.g. Intel J3) legacy unlocking is
+ supported, meaning that unlocking of one sector will unlock
+ all sectors of this bank. Using this feature, unlocking
+ of all sectors upon startup (via env var "unlock=yes") will
+ get much faster.
+
+ - Fixed problem with multiple reads of envronment variable
+ "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
+
+ - Removed unwanted linefeeds from "protect" command when
+ CFG_FLASH_PROTECTION is enabled.
+
+ - Changed p3p400 board to use CFG_FLASH_PROTECTION
+
+ Patch by Stefan Roese, 01 Apr 2006
+
+* Changes/fixes for drivers/cfi_flash.c:
+ - Correctly handle the cases where CFG_HZ != 1000 (several
+ XScale-based boards)
+ - Fix the timeout calculation of buffered writes (off by a
+ factor of 1000)
+ Patch by Anders Larsen, 31 Mar 2006
+
+* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+
+ 405 SDRAM: - The SDRAM parameters can now be defined in the board
+ config file and the 405 SDRAM controller values will
+ be calculated upon bootup (see PPChameleonEVB).
+ When those settings are not defined in the board
+ config file, the register setup will be as it is now,
+ so this implementation should not break any current
+ design using this code.
+
+ Thanks to Andrea Marson from DAVE for this patch.
+
+ 440 DDR: - Added function sdram_tr1_set to auto calculate the
+ TR1 value for the DDR.
+ - Added ECC support (see p3p440).
+
+ Patch by Stefan Roese, 17 Mar 2006
+
+* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
+ Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+
+* Add support for ymodem protocol download
+ Patch by Stefano Babic, 29 Mar 2006
+
+* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
+ Merge from Markus Klotzbücher's repo, 01 Apr 2006
+
+* GCC-4.x fixes: clean up global data pointer initialization for all
+ boards
+
+* Update for Delta board:
+ - redundant NAND environment
+ - misc Monahans cleanups (remove dead code etc.)
+ - DA9030 Initialization; some minimal changes to PXA I2C driver to
+ make it work with the Monahans.
+ - Make Monahans clock frequency configurable using
+ CFG_MONAHANS_RUN_MODE_OSC_RATIO and
+ CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
+ Merge from Markus Klotzbücher's repo, 25 Mar 2006
+
+* Enable Quad UART om MCC200 board.
+
+* Cleanup MCC200 board configuration; omit non-existent stuff.
+
+* Add support for MPC859/866 Rev. A.0
+
projects / karo-tx-uboot.git / blobdiff