powerpc: 83xx: add support for the kmeter1 board

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index 4df48129b8c4514ace19f3bb10f866bbf0e7c694..685c8ae4391d8ef7e4d1c1bf2ead1aaaa86a47c7 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2009
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -228,6 +228,7 @@ LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
 LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -347,7 +348,7 @@ $(obj)u-boot:               depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
 $(OBJS):       depend $(obj)include/autoconf.mk
                $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 
-$(LIBS):       depend $(obj)include/autoconf.mk
+$(LIBS):       depend $(obj)include/autoconf.mk $(SUBDIRS)
                $(MAKE) -C $(dir $(subst $(obj),,$@))
 
 $(LIBBOARD):   depend $(LIBS) $(obj)include/autoconf.mk
@@ -407,6 +408,7 @@ TAG_SUBDIRS += disk
 TAG_SUBDIRS += common
 TAG_SUBDIRS += drivers/bios_emulator
 TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
 TAG_SUBDIRS += drivers/hwmon
 TAG_SUBDIRS += drivers/i2c
 TAG_SUBDIRS += drivers/input
@@ -2184,6 +2186,9 @@ TASREG_config :           unconfig
 ## MPC83xx Systems
 #########################################################################
 
+kmeter1_config: unconfig
+       @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+
 MPC8313ERDB_33_config \
 MPC8313ERDB_66_config \
 MPC8313ERDB_NAND_33_config \
@@ -2461,6 +2466,12 @@ TQM8560_config:          unconfig
        echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
        @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
+XPEDITE5200_config:    unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config:    unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
@@ -2594,6 +2605,7 @@ at91sam9260ek_nandflash_config \
 at91sam9260ek_dataflash_cs0_config \
 at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config   :       unconfig
+       @mkdir -p $(obj)include
        @if [ "$(findstring _nandflash,$@)" ] ; then \
                echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
                $(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2606,10 +2618,28 @@ at91sam9260ek_config    :       unconfig
        fi;
        @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config    :       unconfig
+       @mkdir -p $(obj)include
+       @if [ "$(findstring _nandflash,$@)" ] ; then \
+               echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
+               $(XECHO) "... with environment variable in NAND FLASH" ; \
+       elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+               echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
+               $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+       else \
+               echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
+               $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+       fi;
+       @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
 at91sam9261ek_dataflash_cs3_config \
 at91sam9261ek_config   :       unconfig
+       @mkdir -p $(obj)include
        @if [ "$(findstring _nandflash,$@)" ] ; then \
                echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
                $(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2626,6 +2656,7 @@ at91sam9263ek_nandflash_config \
 at91sam9263ek_dataflash_config \
 at91sam9263ek_dataflash_cs0_config \
 at91sam9263ek_config   :       unconfig
+       @mkdir -p $(obj)include
        @if [ "$(findstring _nandflash,$@)" ] ; then \
                echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
                $(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2639,6 +2670,7 @@ at91sam9rlek_nandflash_config \
 at91sam9rlek_dataflash_config \
 at91sam9rlek_dataflash_cs0_config \
 at91sam9rlek_config    :       unconfig
+       @mkdir -p $(obj)include
        @if [ "$(findstring _nandflash,$@)" ] ; then \
                echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
                $(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -3141,10 +3173,9 @@ PCI5441_config : unconfig
 ## Microblaze
 #========================================================================
 
-ml401_config:  unconfig
+microblaze-generic_config:     unconfig
        @mkdir -p $(obj)include
-       @echo "#define CONFIG_ML401 1" > $(obj)include/config.h
-       @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
+       @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
 
 suzaku_config: unconfig
        @mkdir -p $(obj)include
@@ -3201,8 +3232,8 @@ mimc200_config            :       unconfig
 ## sh2 (Renesas SuperH)
 #########################################################################
 rsk7203_config: unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_RSK7203 1" >> include/config.h
+       @mkdir -p $(obj)include
+       @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
        @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
 
 #########################################################################