* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <spd_sdram.h>
-#include <ppc4xx_enet.h>
+#include <asm/ppc4xx-emac.h>
#include <netdev.h>
#ifdef CONFIG_SYS_INIT_SHOW_RESET_REG
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
/* Enable two GPIO 10~11 and TraceA signal */
mfsdr(SDR0_PFC0,reg);
int checkboard (void)
{
- char *s = getenv ("serial#");
+ char buf[64];
+ int i = getenv_f("serial#", buf, sizeof(buf));
printf ("Board: Taishan - AMCC PPC440GX Evaluation Board");
- if (s != NULL) {
- puts (", serial# ");
- puts (s);
+ if (i > 0) {
+ puts(", serial# ");
+ puts(buf);
}
putc ('\n');
return (0);
}
-/*************************************************************************
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
- *
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose )
-{
- unsigned long strap;
-
- /*--------------------------------------------------------------------------+
- * The ocotea board is always configured as the host & requires the
- * PCI arbiter to be enabled.
- *--------------------------------------------------------------------------*/
- mfsdr(SDR0_SDSTP1, strap);
- if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
- printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
- return 0;
- }
-
- return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
-/*************************************************************************
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
-{
- /*--------------------------------------------------------------------------+
- * Disable everything
- *--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0SA, 0 ); /* disable */
- out32r( PCIX0_PIM1SA, 0 ); /* disable */
- out32r( PCIX0_PIM2SA, 0 ); /* disable */
- out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
-
- /*--------------------------------------------------------------------------+
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
- * options to not support sizes such as 128/256 MB.
- *--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
- out32r( PCIX0_PIM0LAH, 0 );
- out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-
- out32r( PCIX0_BAR0, 0 );
-
- /*--------------------------------------------------------------------------+
- * Program the board's subsystem id/vendor id
- *--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
-
- out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
- /* The ocotea board is always configured as host. */
- return(1);
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
- return (ctrlc());
-}
-#endif
-
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis);
projects / karo-tx-uboot.git / blobdiff