env: Fix return values in env_attr_lookup()

[karo-tx-uboot.git] / common / Kconfig

diff --git a/common/Kconfig b/common/Kconfig
index ff9464c9dc6569c07419b302809ca2e6a563dc55..521f3a84ffb20ecd9b9eabac1eaab913d1bdf28b 100644 (file)
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -33,6 +33,14 @@ config CMD_CONSOLE
        help
          Print console devices and information.
 
+config CMD_CPU
+       bool "cpu"
+       help
+         Print information about available CPUs. This normally shows the
+         number of CPUs, type (e.g. manufacturer, architecture, product or
+         internal name) and clock frequency. Other information may be
+         available depending on the CPU driver.
+
 config CMD_LICENSE
        bool "license"
        help
@@ -613,6 +621,42 @@ config BOOTSTAGE_STASH_SIZE
 
 endmenu
 
+menu "Power commands"
+config CMD_PMIC
+       bool "Enable Driver Model PMIC command"
+       depends on DM_PMIC
+       help
+         This is the pmic command, based on a driver model pmic's API.
+         Command features are unchanged:
+         - list               - list pmic devices
+         - pmic dev <id>      - show or [set] operating pmic device (NEW)
+         - pmic dump          - dump registers
+         - pmic read address  - read byte of register at address
+         - pmic write address - write byte to register at address
+         The only one change for this command is 'dev' subcommand.
+
+config CMD_REGULATOR
+       bool "Enable Driver Model REGULATOR command"
+       depends on DM_REGULATOR
+       help
+         This command is based on driver model regulator's API.
+         User interface features:
+         - list               - list regulator devices
+         - regulator dev <id> - show or [set] operating regulator device
+         - regulator info     - print constraints info
+         - regulator status   - print operating status
+         - regulator value <val] <-f> - print/[set] voltage value [uV]
+         - regulator current <val>    - print/[set] current value [uA]
+         - regulator mode <id>        - print/[set] operating mode id
+         - regulator enable           - enable the regulator output
+         - regulator disable          - disable the regulator output
+
+         The '-f' (force) option can be used for set the value which exceeds
+         the limits, which are found in device-tree and are kept in regulator's
+         uclass platdata structure.
+
+endmenu
+
 endmenu
 
 menu "Environment configuration settings"