#include <i2c.h>
#include <asm/byteorder.h>
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
/* Display values from last command.
static uint i2c_mm_last_addr;
static uint i2c_mm_last_alen;
+/* If only one I2C bus is present, the list of devices to ignore when
+ * the probe command is issued is represented by a 1D array of addresses.
+ * When multiple buses are present, the list is an array of bus-address
+ * pairs. The following macros take care of this */
+
#if defined(CFG_I2C_NOPROBES)
+#if defined(CONFIG_I2C_MULTI_BUS)
+static struct
+{
+ uchar bus;
+ uchar addr;
+} i2c_no_probes[] = CFG_I2C_NOPROBES;
+#define GET_BUS_NUM i2c_get_bus_num()
+#define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b))
+#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a))
+#define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr
+#else /* single bus */
static uchar i2c_no_probes[] = CFG_I2C_NOPROBES;
+#define GET_BUS_NUM 0
+#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
+#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
+#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
+#endif /* CONFIG_MULTI_BUS */
+
+#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
#endif
static int
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
if (alen > 4) {
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
- if(i2c_read(chip, addr, alen, linebuf, linebytes) != 0) {
- printf("Error reading the chip.\n");
- } else {
+ if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
+ puts ("Error reading the chip.\n");
+ else {
printf("%04x:", addr);
cp = linebuf;
for (j=0; j<linebytes; j++) {
printf(" %02x", *cp++);
addr++;
}
- printf(" ");
+ puts (" ");
cp = linebuf;
for (j=0; j<linebytes; j++) {
if ((*cp < 0x20) || (*cp > 0x7e))
- printf(".");
+ puts (".");
else
printf("%c", *cp);
cp++;
}
- printf("\n");
+ putc ('\n');
}
nbytes -= linebytes;
} while (nbytes > 0);
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if(alen > 4) {
+ if (alen > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
/*
* Optional count
*/
- if(argc == 5) {
+ if (argc == 5)
count = simple_strtoul(argv[4], NULL, 16);
- } else {
+ else
count = 1;
- }
while (count-- > 0) {
- if(i2c_write(chip, addr++, alen, &byte, 1) != 0) {
- printf("Error writing the chip.\n");
- }
+ if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
+ puts ("Error writing the chip.\n");
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
* chip doesn't respond. This apparently isn't a
* universal feature so we don't take advantage of it.
*/
+/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CFG_I2C_FRAM)
udelay(11000);
+#endif
+
#if 0
- for(timeout = 0; timeout < 10; timeout++) {
+ for (timeout = 0; timeout < 10; timeout++) {
udelay(2000);
- if(i2c_probe(chip) == 0)
+ if (i2c_probe(chip) == 0)
break;
}
#endif
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if(alen > 4) {
+ if (alen > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
*/
crc = 0;
err = 0;
- while(count-- > 0) {
- if(i2c_read(chip, addr, alen, &byte, 1) != 0) {
+ while (count-- > 0) {
+ if (i2c_read(chip, addr, alen, &byte, 1) != 0)
err++;
- }
crc = crc32 (crc, &byte, 1);
addr++;
}
- if(err > 0)
- {
- printf("Error reading the chip,\n");
- } else {
+ if (err > 0)
+ puts ("Error reading the chip,\n");
+ else
printf ("%08lx\n", crc);
- }
return 0;
}
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if(alen > 4) {
+ if (alen > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
}
*/
do {
printf("%08lx:", addr);
- if(i2c_read(chip, addr, alen, (char *)&data, size) != 0) {
- printf("\nError reading the chip,\n");
- } else {
+ if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
+ puts ("\nError reading the chip,\n");
+ else {
data = cpu_to_be32(data);
- if(size == 1) {
+ if (size == 1)
printf(" %02lx", (data >> 24) & 0x000000FF);
- } else if(size == 2) {
+ else if (size == 2)
printf(" %04lx", (data >> 16) & 0x0000FFFF);
- } else {
+ else
printf(" %08lx", data);
- }
}
nbytes = readline (" ? ");
#endif
}
#ifdef CONFIG_BOOT_RETRY_TIME
- else if (nbytes == -2) {
+ else if (nbytes == -2)
break; /* timed out, exit the command */
- }
#endif
else {
char *endp;
data = simple_strtoul(console_buffer, &endp, 16);
- if(size == 1) {
+ if (size == 1)
data = data << 24;
- } else if(size == 2) {
+ else if (size == 2)
data = data << 16;
- }
data = be32_to_cpu(data);
nbytes = endp - console_buffer;
if (nbytes) {
*/
reset_cmd_timeout();
#endif
- if(i2c_write(chip, addr, alen, (char *)&data, size) != 0) {
- printf("Error writing the chip.\n");
- }
+ if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
+ puts ("Error writing the chip.\n");
+#ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
if (incrflag)
addr += size;
}
int j;
#if defined(CFG_I2C_NOPROBES)
int k, skip;
-#endif
+ uchar bus = GET_BUS_NUM;
+#endif /* NOPROBES */
- printf("Valid chip addresses:");
- for(j = 0; j < 128; j++) {
+ puts ("Valid chip addresses:");
+ for (j = 0; j < 128; j++) {
#if defined(CFG_I2C_NOPROBES)
skip = 0;
- for (k = 0; k < sizeof(i2c_no_probes); k++){
- if (j == i2c_no_probes[k]){
+ for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+ if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) {
skip = 1;
break;
}
if (skip)
continue;
#endif
- if(i2c_probe(j) == 0) {
+ if (i2c_probe(j) == 0)
printf(" %02X", j);
- }
}
- printf("\n");
+ putc ('\n');
#if defined(CFG_I2C_NOPROBES)
puts ("Excluded chip addresses:");
- for( k = 0; k < sizeof(i2c_no_probes); k++ )
- printf(" %02X", i2c_no_probes[k] );
- puts ("\n");
+ for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+ if (COMPARE_BUS(bus,k))
+ printf(" %02X", NO_PROBE_ADDR(k));
+ }
+ putc ('\n');
#endif
return 0;
*/
addr = simple_strtoul(argv[2], NULL, 16);
alen = 1;
- for(j = 0; j < 8; j++) {
+ for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
if (alen > 4) {
return 1;
}
break;
- } else if (argv[2][j] == '\0') {
+ } else if (argv[2][j] == '\0')
break;
- }
}
/*
*/
length = 1;
length = simple_strtoul(argv[3], NULL, 16);
- if(length > sizeof(bytes)) {
+ if (length > sizeof(bytes))
length = sizeof(bytes);
- }
/*
* The delay time (uSec) is optional.
*/
delay = 1000;
- if (argc > 3) {
+ if (argc > 3)
delay = simple_strtoul(argv[4], NULL, 10);
- }
/*
* Run the loop...
*/
- while(1) {
- if(i2c_read(chip, addr, alen, bytes, length) != 0) {
- printf("Error reading the chip.\n");
- }
+ while (1) {
+ if (i2c_read(chip, addr, alen, bytes, length) != 0)
+ puts ("Error reading the chip.\n");
udelay(delay);
}
* The SDRAM command is separately configured because many
* (most?) embedded boards don't use SDRAM DIMMs.
*/
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+#if defined(CONFIG_CMD_SDRAM)
/*
* Syntax:
*/
chip = simple_strtoul(argv[1], NULL, 16);
- if(i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
- printf("No SDRAM Serial Presence Detect found.\n");
+ if (i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
+ puts ("No SDRAM Serial Presence Detect found.\n");
return 1;
}
for (j = 0; j < 63; j++) {
cksum += data[j];
}
- if(cksum != data[63]) {
+ if (cksum != data[63]) {
printf ("WARNING: Configuration data checksum failure:\n"
" is 0x%02x, calculated 0x%02x\n",
data[63], cksum);
(data[62] >> 4) & 0x0F, data[62] & 0x0F);
printf("Bytes used 0x%02X\n", data[0]);
printf("Serial memory size 0x%02X\n", 1 << data[1]);
- printf("Memory type ");
+ puts ("Memory type ");
switch(data[2]) {
- case 2: printf("EDO\n"); break;
- case 4: printf("SDRAM\n"); break;
- default: printf("unknown\n"); break;
+ case 2: puts ("EDO\n"); break;
+ case 4: puts ("SDRAM\n"); break;
+ case 8: puts ("DDR2\n"); break;
+ default: puts ("unknown\n"); break;
}
- printf("Row address bits ");
- if((data[3] & 0x00F0) == 0) {
+ puts ("Row address bits ");
+ if ((data[3] & 0x00F0) == 0)
printf("%d\n", data[3] & 0x0F);
- } else {
+ else
printf("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F);
- }
- printf("Column address bits ");
- if((data[4] & 0x00F0) == 0) {
+ puts ("Column address bits ");
+ if ((data[4] & 0x00F0) == 0)
printf("%d\n", data[4] & 0x0F);
- } else {
+ else
printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F);
- }
printf("Module rows %d\n", data[5]);
printf("Module data width %d bits\n", (data[7] << 8) | data[6]);
- printf("Interface signal levels ");
+ puts ("Interface signal levels ");
switch(data[8]) {
- case 0: printf("5.0v/TTL\n"); break;
- case 1: printf("LVTTL\n"); break;
- case 2: printf("HSTL 1.5\n"); break;
- case 3: printf("SSTL 3.3\n"); break;
- case 4: printf("SSTL 2.5\n"); break;
- default: printf("unknown\n"); break;
+ case 0: puts ("5.0v/TTL\n"); break;
+ case 1: puts ("LVTTL\n"); break;
+ case 2: puts ("HSTL 1.5\n"); break;
+ case 3: puts ("SSTL 3.3\n"); break;
+ case 4: puts ("SSTL 2.5\n"); break;
+ case 5: puts ("SSTL 1.8\n"); break;
+ default: puts ("unknown\n"); break;
}
printf("SDRAM cycle time %d.%d nS\n",
(data[9] >> 4) & 0x0F, data[9] & 0x0F);
printf("SDRAM access time %d.%d nS\n",
(data[10] >> 4) & 0x0F, data[10] & 0x0F);
- printf("EDC configuration ");
+ puts ("EDC configuration ");
switch(data[11]) {
- case 0: printf("None\n"); break;
- case 1: printf("Parity\n"); break;
- case 2: printf("ECC\n"); break;
- default: printf("unknown\n"); break;
- }
- if((data[12] & 0x80) == 0) {
- printf("No self refresh, rate ");
- } else {
- printf("Self refresh, rate ");
+ case 0: puts ("None\n"); break;
+ case 1: puts ("Parity\n"); break;
+ case 2: puts ("ECC\n"); break;
+ default: puts ("unknown\n"); break;
}
+ if ((data[12] & 0x80) == 0)
+ puts ("No self refresh, rate ");
+ else
+ puts ("Self refresh, rate ");
switch(data[12] & 0x7F) {
- case 0: printf("15.625uS\n"); break;
- case 1: printf("3.9uS\n"); break;
- case 2: printf("7.8uS\n"); break;
- case 3: printf("31.3uS\n"); break;
- case 4: printf("62.5uS\n"); break;
- case 5: printf("125uS\n"); break;
- default: printf("unknown\n"); break;
+ case 0: puts ("15.625uS\n"); break;
+ case 1: puts ("3.9uS\n"); break;
+ case 2: puts ("7.8uS\n"); break;
+ case 3: puts ("31.3uS\n"); break;
+ case 4: puts ("62.5uS\n"); break;
+ case 5: puts ("125uS\n"); break;
+ default: puts ("unknown\n"); break;
}
printf("SDRAM width (primary) %d\n", data[13] & 0x7F);
- if((data[13] & 0x80) != 0) {
+ if ((data[13] & 0x80) != 0) {
printf(" (second bank) %d\n",
2 * (data[13] & 0x7F));
}
- if(data[14] != 0) {
+ if (data[14] != 0) {
printf("EDC width %d\n",
data[14] & 0x7F);
- if((data[14] & 0x80) != 0) {
+ if ((data[14] & 0x80) != 0)
printf(" (second bank) %d\n",
2 * (data[14] & 0x7F));
- }
}
printf("Min clock delay, back-to-back random column addresses %d\n",
data[15]);
- printf("Burst length(s) ");
- if(data[16] & 0x80) printf(" Page");
- if(data[16] & 0x08) printf(" 8");
- if(data[16] & 0x04) printf(" 4");
- if(data[16] & 0x02) printf(" 2");
- if(data[16] & 0x01) printf(" 1");
- printf("\n");
+ puts ("Burst length(s) ");
+ if (data[16] & 0x80) puts (" Page");
+ if (data[16] & 0x08) puts (" 8");
+ if (data[16] & 0x04) puts (" 4");
+ if (data[16] & 0x02) puts (" 2");
+ if (data[16] & 0x01) puts (" 1");
+ putc ('\n');
printf("Number of banks %d\n", data[17]);
- printf("CAS latency(s) ");
- if(data[18] & 0x80) printf(" TBD");
- if(data[18] & 0x40) printf(" 7");
- if(data[18] & 0x20) printf(" 6");
- if(data[18] & 0x10) printf(" 5");
- if(data[18] & 0x08) printf(" 4");
- if(data[18] & 0x04) printf(" 3");
- if(data[18] & 0x02) printf(" 2");
- if(data[18] & 0x01) printf(" 1");
- printf("\n");
- printf("CS latency(s) ");
- if(data[19] & 0x80) printf(" TBD");
- if(data[19] & 0x40) printf(" 6");
- if(data[19] & 0x20) printf(" 5");
- if(data[19] & 0x10) printf(" 4");
- if(data[19] & 0x08) printf(" 3");
- if(data[19] & 0x04) printf(" 2");
- if(data[19] & 0x02) printf(" 1");
- if(data[19] & 0x01) printf(" 0");
- printf("\n");
- printf("WE latency(s) ");
- if(data[20] & 0x80) printf(" TBD");
- if(data[20] & 0x40) printf(" 6");
- if(data[20] & 0x20) printf(" 5");
- if(data[20] & 0x10) printf(" 4");
- if(data[20] & 0x08) printf(" 3");
- if(data[20] & 0x04) printf(" 2");
- if(data[20] & 0x02) printf(" 1");
- if(data[20] & 0x01) printf(" 0");
- printf("\n");
- printf("Module attributes:\n");
- if(!data[21]) printf(" (none)\n");
- if(data[21] & 0x80) printf(" TBD (bit 7)\n");
- if(data[21] & 0x40) printf(" Redundant row address\n");
- if(data[21] & 0x20) printf(" Differential clock input\n");
- if(data[21] & 0x10) printf(" Registerd DQMB inputs\n");
- if(data[21] & 0x08) printf(" Buffered DQMB inputs\n");
- if(data[21] & 0x04) printf(" On-card PLL\n");
- if(data[21] & 0x02) printf(" Registered address/control lines\n");
- if(data[21] & 0x01) printf(" Buffered address/control lines\n");
- printf("Device attributes:\n");
- if(data[22] & 0x80) printf(" TBD (bit 7)\n");
- if(data[22] & 0x40) printf(" TBD (bit 6)\n");
- if(data[22] & 0x20) printf(" Upper Vcc tolerance 5%%\n");
- else printf(" Upper Vcc tolerance 10%%\n");
- if(data[22] & 0x10) printf(" Lower Vcc tolerance 5%%\n");
- else printf(" Lower Vcc tolerance 10%%\n");
- if(data[22] & 0x08) printf(" Supports write1/read burst\n");
- if(data[22] & 0x04) printf(" Supports precharge all\n");
- if(data[22] & 0x02) printf(" Supports auto precharge\n");
- if(data[22] & 0x01) printf(" Supports early RAS# precharge\n");
+ puts ("CAS latency(s) ");
+ if (data[18] & 0x80) puts (" TBD");
+ if (data[18] & 0x40) puts (" 7");
+ if (data[18] & 0x20) puts (" 6");
+ if (data[18] & 0x10) puts (" 5");
+ if (data[18] & 0x08) puts (" 4");
+ if (data[18] & 0x04) puts (" 3");
+ if (data[18] & 0x02) puts (" 2");
+ if (data[18] & 0x01) puts (" 1");
+ putc ('\n');
+ puts ("CS latency(s) ");
+ if (data[19] & 0x80) puts (" TBD");
+ if (data[19] & 0x40) puts (" 6");
+ if (data[19] & 0x20) puts (" 5");
+ if (data[19] & 0x10) puts (" 4");
+ if (data[19] & 0x08) puts (" 3");
+ if (data[19] & 0x04) puts (" 2");
+ if (data[19] & 0x02) puts (" 1");
+ if (data[19] & 0x01) puts (" 0");
+ putc ('\n');
+ puts ("WE latency(s) ");
+ if (data[20] & 0x80) puts (" TBD");
+ if (data[20] & 0x40) puts (" 6");
+ if (data[20] & 0x20) puts (" 5");
+ if (data[20] & 0x10) puts (" 4");
+ if (data[20] & 0x08) puts (" 3");
+ if (data[20] & 0x04) puts (" 2");
+ if (data[20] & 0x02) puts (" 1");
+ if (data[20] & 0x01) puts (" 0");
+ putc ('\n');
+ puts ("Module attributes:\n");
+ if (!data[21]) puts (" (none)\n");
+ if (data[21] & 0x80) puts (" TBD (bit 7)\n");
+ if (data[21] & 0x40) puts (" Redundant row address\n");
+ if (data[21] & 0x20) puts (" Differential clock input\n");
+ if (data[21] & 0x10) puts (" Registerd DQMB inputs\n");
+ if (data[21] & 0x08) puts (" Buffered DQMB inputs\n");
+ if (data[21] & 0x04) puts (" On-card PLL\n");
+ if (data[21] & 0x02) puts (" Registered address/control lines\n");
+ if (data[21] & 0x01) puts (" Buffered address/control lines\n");
+ puts ("Device attributes:\n");
+ if (data[22] & 0x80) puts (" TBD (bit 7)\n");
+ if (data[22] & 0x40) puts (" TBD (bit 6)\n");
+ if (data[22] & 0x20) puts (" Upper Vcc tolerance 5%\n");
+ else puts (" Upper Vcc tolerance 10%\n");
+ if (data[22] & 0x10) puts (" Lower Vcc tolerance 5%\n");
+ else puts (" Lower Vcc tolerance 10%\n");
+ if (data[22] & 0x08) puts (" Supports write1/read burst\n");
+ if (data[22] & 0x04) puts (" Supports precharge all\n");
+ if (data[22] & 0x02) puts (" Supports auto precharge\n");
+ if (data[22] & 0x01) puts (" Supports early RAS# precharge\n");
printf("SDRAM cycle time (2nd highest CAS latency) %d.%d nS\n",
(data[23] >> 4) & 0x0F, data[23] & 0x0F);
printf("SDRAM access from clock (2nd highest CAS latency) %d.%d nS\n",
printf("Row active to row active min %d nS\n", data[28]);
printf("RAS to CAS delay min %d nS\n", data[29]);
printf("Minimum RAS pulse width %d nS\n", data[30]);
- printf("Density of each row ");
- if(data[31] & 0x80) printf(" 512MByte");
- if(data[31] & 0x40) printf(" 256MByte");
- if(data[31] & 0x20) printf(" 128MByte");
- if(data[31] & 0x10) printf(" 64MByte");
- if(data[31] & 0x08) printf(" 32MByte");
- if(data[31] & 0x04) printf(" 16MByte");
- if(data[31] & 0x02) printf(" 8MByte");
- if(data[31] & 0x01) printf(" 4MByte");
- printf("\n");
+ puts ("Density of each row ");
+ if (data[31] & 0x80) puts (" 512");
+ if (data[31] & 0x40) puts (" 256");
+ if (data[31] & 0x20) puts (" 128");
+ if (data[31] & 0x10) puts (" 64");
+ if (data[31] & 0x08) puts (" 32");
+ if (data[31] & 0x04) puts (" 16");
+ if (data[31] & 0x02) puts (" 8");
+ if (data[31] & 0x01) puts (" 4");
+ puts ("MByte\n");
printf("Command and Address setup %c%d.%d nS\n",
(data[32] & 0x80) ? '-' : '+',
(data[32] >> 4) & 0x07, data[32] & 0x0F);
printf("Data signal input hold %c%d.%d nS\n",
(data[35] & 0x80) ? '-' : '+',
(data[35] >> 4) & 0x07, data[35] & 0x0F);
- printf("Manufacturer's JEDEC ID ");
- for(j = 64; j <= 71; j++)
+ puts ("Manufacturer's JEDEC ID ");
+ for (j = 64; j <= 71; j++)
printf("%02X ", data[j]);
- printf("\n");
+ putc ('\n');
printf("Manufacturing Location %02X\n", data[72]);
- printf("Manufacturer's Part Number ");
- for(j = 73; j <= 90; j++)
+ puts ("Manufacturer's Part Number ");
+ for (j = 73; j <= 90; j++)
printf("%02X ", data[j]);
- printf("\n");
+ putc ('\n');
printf("Revision Code %02X %02X\n", data[91], data[92]);
printf("Manufacturing Date %02X %02X\n", data[93], data[94]);
- printf("Assembly Serial Number ");
- for(j = 95; j <= 98; j++)
+ puts ("Assembly Serial Number ");
+ for (j = 95; j <= 98; j++)
printf("%02X ", data[j]);
- printf("\n");
+ putc ('\n');
printf("Speed rating PC%d\n",
data[126] == 0x66 ? 66 : data[126]);
return 0;
}
-#endif /* CFG_CMD_SDRAM */
+#endif
+#if defined(CONFIG_I2C_CMD_TREE)
+#if defined(CONFIG_I2C_MULTI_BUS)
+int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int bus_idx, ret=0;
+
+ if (argc == 1)
+ /* querying current setting */
+ printf("Current bus is %d\n", i2c_get_bus_num());
+ else {
+ bus_idx = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus to %d\n", bus_idx);
+ ret = i2c_set_bus_num(bus_idx);
+ if (ret)
+ printf("Failure changing bus number (%d)\n", ret);
+ }
+ return ret;
+}
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int speed, ret=0;
+
+ if (argc == 1)
+ /* querying current speed */
+ printf("Current bus speed=%d\n", i2c_get_bus_speed());
+ else {
+ speed = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus speed to %d Hz\n", speed);
+ ret = i2c_set_bus_speed(speed);
+ if (ret)
+ printf("Failure changing bus speed (%d)\n", ret);
+ }
+ return ret;
+}
+
+int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_I2C_MULTI_BUS)
+ if (!strncmp(argv[1], "de", 2))
+ return do_i2c_bus_num(cmdtp, flag, --argc, ++argv);
+#endif /* CONFIG_I2C_MULTI_BUS */
+ if (!strncmp(argv[1], "sp", 2))
+ return do_i2c_bus_speed(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "md", 2))
+ return do_i2c_md(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "mm", 2))
+ return do_i2c_mm(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "mw", 2))
+ return do_i2c_mw(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "nm", 2))
+ return do_i2c_nm(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "cr", 2))
+ return do_i2c_crc(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "pr", 2))
+ return do_i2c_probe(cmdtp, flag, --argc, ++argv);
+ if (!strncmp(argv[1], "lo", 2))
+ return do_i2c_loop(cmdtp, flag, --argc, ++argv);
+#if defined(CONFIG_CMD_SDRAM)
+ if (!strncmp(argv[1], "sd", 2))
+ return do_sdram(cmdtp, flag, --argc, ++argv);
+#endif
+ else
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 0;
+}
+#endif /* CONFIG_I2C_CMD_TREE */
/***************************************************/
-cmd_tbl_t U_BOOT_CMD(IMD) = MK_CMD_ENTRY(
- "imd", 4, 1, do_i2c_md, \
+#if defined(CONFIG_I2C_CMD_TREE)
+U_BOOT_CMD(
+ i2c, 6, 1, do_i2c,
+ "i2c - I2C sub-system\n",
+#if defined(CONFIG_I2C_MULTI_BUS)
+ "dev [dev] - show or set current I2C bus\n"
+#endif /* CONFIG_I2C_MULTI_BUS */
+ "i2c speed [speed] - show or set I2C bus speed\n"
+ "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
+ "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
+ "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+ "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+ "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+ "i2c probe - show devices on the I2C bus\n"
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+#if defined(CONFIG_CMD_SDRAM)
+ "i2c sdram chip - print SDRAM configuration information\n"
+#endif
+);
+#endif /* CONFIG_I2C_CMD_TREE */
+U_BOOT_CMD(
+ imd, 4, 1, do_i2c_md, \
"imd - i2c memory display\n", \
"chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \
);
-cmd_tbl_t U_BOOT_CMD(IMM) = MK_CMD_ENTRY(
- "imm", 3, 1, do_i2c_mm,
+U_BOOT_CMD(
+ imm, 3, 1, do_i2c_mm,
"imm - i2c memory modify (auto-incrementing)\n",
"chip address[.0, .1, .2]\n"
" - memory modify, auto increment address\n"
);
-cmd_tbl_t U_BOOT_CMD(INM) = MK_CMD_ENTRY(
- "inm", 3, 1, do_i2c_nm,
+U_BOOT_CMD(
+ inm, 3, 1, do_i2c_nm,
"inm - memory modify (constant address)\n",
"chip address[.0, .1, .2]\n - memory modify, read and keep address\n"
);
-cmd_tbl_t U_BOOT_CMD(IMW) = MK_CMD_ENTRY(
- "imw", 5, 1, do_i2c_mw,
+U_BOOT_CMD(
+ imw, 5, 1, do_i2c_mw,
"imw - memory write (fill)\n",
"chip address[.0, .1, .2] value [count]\n - memory write (fill)\n"
);
-cmd_tbl_t U_BOOT_CMD(ICRC) = MK_CMD_ENTRY(
- "icrc32", 5, 1, do_i2c_crc,
+U_BOOT_CMD(
+ icrc32, 5, 1, do_i2c_crc,
"icrc32 - checksum calculation\n",
"chip address[.0, .1, .2] count\n - compute CRC32 checksum\n"
);
-cmd_tbl_t U_BOOT_CMD(IPROBE) = MK_CMD_ENTRY(
- "iprobe", 1, 1, do_i2c_probe,
+U_BOOT_CMD(
+ iprobe, 1, 1, do_i2c_probe,
"iprobe - probe to discover valid I2C chip addresses\n",
"\n -discover valid I2C chip addresses\n"
);
/*
* Require full name for "iloop" because it is an infinite loop!
*/
-cmd_tbl_t U_BOOT_CMD(ILOOP) = MK_CMD_ENTRY(
- "iloop", 5, 1, do_i2c_loop,
+U_BOOT_CMD(
+ iloop, 5, 1, do_i2c_loop,
"iloop - infinite loop on address range\n",
"chip address[.0, .1, .2] [# of objects]\n"
" - loop, reading a set of addresses\n"
);
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
-cmd_tbl_t U_BOOT_CMD(ISDRAM) = MK_CMD_ENTRY(
- "isdram", 2, 1, do_sdram,
+#if defined(CONFIG_CMD_SDRAM)
+U_BOOT_CMD(
+ isdram, 2, 1, do_sdram,
"isdram - print SDRAM configuration information\n",
"chip\n - print SDRAM configuration information\n"
" (valid chip values 50..57)\n"
);
#endif
-#endif /* CFG_CMD_I2C */
+
+#endif
projects / karo-tx-uboot.git / blobdiff