i.MX31: Fix architecture numbers for ADS and Litekit boards

[karo-tx-uboot.git] / common / cmd_scsi.c

diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index cc08743d5dcc7a42a8c5030a04a9bce4d017dfc4..f49531e96b708d5d0de7fd2cc665e2216f48905a 100644 (file)
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -34,8 +34,6 @@
 #include <image.h>
 #include <pci.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
-
 #ifdef CONFIG_SCSI_SYM53C8XX
 #define SCSI_VEND_ID   0x1000
 #ifndef CONFIG_SCSI_DEV_ID
@@ -74,7 +72,7 @@ void scsi_setup_inquiry(ccb * pccb);
 void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
 
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, ulong *buffer);
+ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer);
 
 
 /*********************************************************************************
@@ -129,9 +127,12 @@ void scsi_scan(int mode)
                        if((modi&0x80)==0x80) /* drive is removable */
                                scsi_dev_desc[scsi_max_devs].removable=TRUE;
                        /* get info for this device */
-                       scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].vendor[0],&tempbuff[8],8);
-                       scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].product[0],&tempbuff[16],16);
-                       scsi_ident_cpy(&scsi_dev_desc[scsi_max_devs].revision[0],&tempbuff[32],4);
+                       scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0],
+                                      &tempbuff[8], 8);
+                       scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0],
+                                      &tempbuff[16], 16);
+                       scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0],
+                                      &tempbuff[32], 4);
                        scsi_dev_desc[scsi_max_devs].target=pccb->target;
                        scsi_dev_desc[scsi_max_devs].lun=pccb->lun;
 
@@ -194,7 +195,7 @@ void scsi_init(void)
 
 block_dev_desc_t * scsi_get_dev(int dev)
 {
-       return((block_dev_desc_t *)&scsi_dev_desc[dev]);
+       return (dev < CFG_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL;
 }
 
 
@@ -206,10 +207,13 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        char *boot_device = NULL;
        char *ep;
        int dev, part = 0;
-       ulong addr, cnt, checksum;
+       ulong addr, cnt;
        disk_partition_t info;
        image_header_t *hdr;
        int rcode = 0;
+#if defined(CONFIG_FIT)
+       const void *fit_hdr;
+#endif
 
        switch (argc) {
        case 1:
@@ -248,7 +252,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                }
                part = simple_strtoul(++ep, NULL, 16);
        }
-       if (get_partition_info (scsi_dev_desc, part, &info)) {
+       if (get_partition_info (&scsi_dev_desc[dev], part, &info)) {
                printf("error reading partinfo\n");
                return 1;
        }
@@ -272,24 +276,35 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                return 1;
        }
 
-       hdr = (image_header_t *)addr;
+       switch (genimg_get_format ((void *)addr)) {
+       case IMAGE_FORMAT_LEGACY:
+               hdr = (image_header_t *)addr;
 
-       if (ntohl(hdr->ih_magic) == IH_MAGIC) {
-               printf("\n** Bad Magic Number **\n");
-               return 1;
-       }
+               if (!image_check_hcrc (hdr)) {
+                       puts ("\n** Bad Header Checksum **\n");
+                       return 1;
+               }
 
-       checksum = ntohl(hdr->ih_hcrc);
-       hdr->ih_hcrc = 0;
+               image_print_contents (hdr);
+               cnt = image_get_image_size (hdr);
+               break;
+#if defined(CONFIG_FIT)
+       case IMAGE_FORMAT_FIT:
+               fit_hdr = (const void *)addr;
+               if (!fit_check_format (fit_hdr)) {
+                       puts ("** Bad FIT image format\n");
+                       return 1;
+               }
+               puts ("Fit image detected...\n");
 
-       if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) {
-               puts ("\n** Bad Header Checksum **\n");
+               cnt = fit_get_size (fit_hdr);
+               break;
+#endif
+       default:
+               puts ("** Unknown image type\n");
                return 1;
        }
-       hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */
 
-       print_image_hdr (hdr);
-       cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
        cnt += info.blksz - 1;
        cnt /= info.blksz;
        cnt -= 1;
@@ -299,6 +314,13 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                printf ("** Read error on %d:%d\n", dev, part);
                return 1;
        }
+
+#if defined(CONFIG_FIT)
+       /* This cannot be done earlier, we need complete FIT image in RAM first */
+       if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT)
+               fit_print_contents ((const void *)addr);
+#endif
+
        /* Loading ok, update default load address */
        load_addr = addr;
 
@@ -424,7 +446,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 #define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
 
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, ulong *buffer)
+ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
 {
        ulong start,blks, buf_addr;
        unsigned short smallblks;
@@ -608,5 +630,3 @@ U_BOOT_CMD(
        "scsiboot- boot from SCSI device\n",
        "loadAddr dev:part\n"
 );
-
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_SCSI) */