-/* -*- c-basic-offset: 8 -*-
- *
- * fw-transaction.h - Header for IEEE1394 transaction logic
- *
+/*
* Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
*
* This program is free software; you can redistribute it and/or modify
#include <linux/list.h>
#include <linux/fs.h>
#include <linux/dma-mapping.h>
-
-#define TCODE_WRITE_QUADLET_REQUEST 0
-#define TCODE_WRITE_BLOCK_REQUEST 1
-#define TCODE_WRITE_RESPONSE 2
-#define TCODE_READ_QUADLET_REQUEST 4
-#define TCODE_READ_BLOCK_REQUEST 5
-#define TCODE_READ_QUADLET_RESPONSE 6
-#define TCODE_READ_BLOCK_RESPONSE 7
-#define TCODE_CYCLE_START 8
-#define TCODE_LOCK_REQUEST 9
-#define TCODE_STREAM_DATA 10
-#define TCODE_LOCK_RESPONSE 11
+#include <linux/firewire-constants.h>
#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
#define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0)
#define TCODE_HAS_REQUEST_DATA(tcode) (((tcode) & 12) != 4)
#define TCODE_HAS_RESPONSE_DATA(tcode) (((tcode) & 12) != 0)
-/* Juju specific tcodes */
-#define TCODE_DEALLOCATE 0x10
-#define TCODE_LOCK_MASK_SWAP 0x11
-#define TCODE_LOCK_COMPARE_SWAP 0x12
-#define TCODE_LOCK_FETCH_ADD 0x13
-#define TCODE_LOCK_LITTLE_ADD 0x14
-#define TCODE_LOCK_BOUNDED_ADD 0x15
-#define TCODE_LOCK_WRAP_ADD 0x16
-#define TCODE_LOCK_VENDOR_SPECIFIC 0x17
-
-#define SCODE_100 0x0
-#define SCODE_200 0x1
-#define SCODE_400 0x2
-#define SCODE_BETA 0x3
-
-#define EXTCODE_MASK_SWAP 0x1
-#define EXTCODE_COMPARE_SWAP 0x2
-#define EXTCODE_FETCH_ADD 0x3
-#define EXTCODE_LITTLE_ADD 0x4
-#define EXTCODE_BOUNDED_ADD 0x5
-#define EXTCODE_WRAP_ADD 0x6
-
-#define ACK_COMPLETE 0x1
-#define ACK_PENDING 0x2
-#define ACK_BUSY_X 0x4
-#define ACK_BUSY_A 0x5
-#define ACK_BUSY_B 0x6
-#define ACK_DATA_ERROR 0xd
-#define ACK_TYPE_ERROR 0xe
-
-#define RCODE_COMPLETE 0x0
-#define RCODE_CONFLICT_ERROR 0x4
-#define RCODE_DATA_ERROR 0x5
-#define RCODE_TYPE_ERROR 0x6
-#define RCODE_ADDRESS_ERROR 0x7
-
-/* Juju specific rcodes */
-#define RCODE_SEND_ERROR 0x10
-#define RCODE_CANCELLED 0x11
-#define RCODE_BUSY 0x12
-#define RCODE_GENERATION 0x13
-#define RCODE_NO_ACK 0x14
-
-#define RETRY_1 0x00
-#define RETRY_X 0x01
-#define RETRY_A 0x02
-#define RETRY_B 0x03
-
#define LOCAL_BUS 0xffc0
#define SELFID_PORT_CHILD 0x3
#define PHY_PACKET_LINK_ON 0x1
#define PHY_PACKET_SELF_ID 0x2
+/* Bit fields _within_ the PHY registers. */
+#define PHY_LINK_ACTIVE 0x80
+#define PHY_CONTENDER 0x40
+#define PHY_BUS_RESET 0x40
+#define PHY_BUS_SHORT_RESET 0x40
+
#define CSR_REGISTER_BASE 0xfffff0000000ULL
/* register offsets relative to CSR_REGISTER_BASE */
struct fw_descriptor {
struct list_head link;
size_t length;
+ u32 immediate;
u32 key;
const u32 *data;
};
-int fw_core_add_descriptor (struct fw_descriptor *desc);
-void fw_core_remove_descriptor (struct fw_descriptor *desc);
+int fw_core_add_descriptor(struct fw_descriptor *desc);
+void fw_core_remove_descriptor(struct fw_descriptor *desc);
-typedef void (*fw_packet_callback_t) (struct fw_packet *packet,
- struct fw_card *card, int status);
+typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
+ struct fw_card *card, int status);
typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
void *data,
size_t length,
void *callback_data);
+/*
+ * Important note: The callback must guarantee that either fw_send_response()
+ * or kfree() is called on the @request.
+ */
typedef void (*fw_address_callback_t)(struct fw_card *card,
struct fw_request *request,
int tcode, int destination, int source,
size_t payload_length;
u32 timestamp;
- dma_addr_t payload_bus;
-
- /* This callback is called when the packet transmission has
+ /*
+ * This callback is called when the packet transmission has
* completed; for successful transmission, the status code is
* the ack received from the destination, otherwise it's a
* negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
fw_packet_callback_t callback;
int ack;
struct list_head link;
+ void *driver_data;
};
struct fw_transaction {
struct fw_packet packet;
- /* The data passed to the callback is valid only during the
- * callback. */
+ /*
+ * The data passed to the callback is valid only during the
+ * callback.
+ */
fw_transaction_callback_t callback;
void *callback_data;
};
static inline struct fw_packet *
fw_packet(struct list_head *l)
{
- return list_entry (l, struct fw_packet, link);
+ return list_entry(l, struct fw_packet, link);
}
struct fw_address_handler {
struct fw_card {
const struct fw_card_driver *driver;
struct device *device;
+ struct kref kref;
int node_id;
int generation;
unsigned long reset_jiffies;
unsigned long long guid;
- int max_receive;
+ unsigned max_receive;
int link_speed;
int config_rom_generation;
- /* We need to store up to 4 self ID for a maximum of 63 devices. */
+ /*
+ * We need to store up to 4 self ID for a maximum of 63
+ * devices plus 3 words for the topology map header.
+ */
int self_id_count;
- u32 self_ids[252];
+ u32 topology_map[252 + 3];
spinlock_t lock; /* Take this lock when handling the lists in
* this struct. */
int index;
- struct device card_device;
-
struct list_head link;
/* Work struct for BM duties. */
struct fw_card *fw_card_get(struct fw_card *card);
void fw_card_put(struct fw_card *card);
-/* The iso packet format allows for an immediate header/payload part
+/*
+ * The iso packet format allows for an immediate header/payload part
* stored in 'header' immediately after the packet info plus an
* indirect payload part that is pointer to by the 'payload' field.
* Applications can use one or the other or both to implement simple
* low-bandwidth streaming (e.g. audio) or more advanced
- * scatter-gather streaming (e.g. assembling video frame automatically). */
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
struct fw_iso_packet {
u16 payload_length; /* Length of indirect payload. */
#define FW_ISO_CONTEXT_TRANSMIT 0
#define FW_ISO_CONTEXT_RECEIVE 1
+#define FW_ISO_CONTEXT_MATCH_TAG0 1
+#define FW_ISO_CONTEXT_MATCH_TAG1 2
+#define FW_ISO_CONTEXT_MATCH_TAG2 4
+#define FW_ISO_CONTEXT_MATCH_TAG3 8
+#define FW_ISO_CONTEXT_MATCH_ALL_TAGS 15
+
struct fw_iso_context;
-typedef void (*fw_iso_callback_t) (struct fw_iso_context *context,
- u32 cycle,
- size_t header_length,
- void *header,
- void *data);
+typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
+ u32 cycle,
+ size_t header_length,
+ void *header,
+ void *data);
-/* An iso buffer is just a set of pages mapped for DMA in the
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
* specified direction. Since the pages are to be used for DMA, they
* are not mapped into the kernel virtual address space. We store the
* DMA address in the page private. The helper function
- * fw_iso_buffer_map() will map the pages into a given vma. */
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
struct fw_iso_buffer {
enum dma_data_direction direction;
fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
struct fw_iso_context *
-fw_iso_context_create(struct fw_card *card, int type, size_t header_size,
+fw_iso_context_create(struct fw_card *card, int type,
+ int channel, int speed, size_t header_size,
fw_iso_callback_t callback, void *callback_data);
void
int
fw_iso_context_start(struct fw_iso_context *ctx,
- int channel, int speed, int cycle);
+ int cycle, int sync, int tags);
int
fw_iso_context_stop(struct fw_iso_context *ctx);
struct fw_card_driver {
const char *name;
- /* Enable the given card with the given initial config rom.
+ /*
+ * Enable the given card with the given initial config rom.
* This function is expected to activate the card, and either
* enable the PHY or set the link_on bit and initiate a bus
- * reset. */
- int (*enable) (struct fw_card *card, u32 *config_rom, size_t length);
+ * reset.
+ */
+ int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
- int (*update_phy_reg) (struct fw_card *card, int address,
- int clear_bits, int set_bits);
+ int (*update_phy_reg)(struct fw_card *card, int address,
+ int clear_bits, int set_bits);
- /* Update the config rom for an enabled card. This function
+ /*
+ * Update the config rom for an enabled card. This function
* should change the config rom that is presented on the bus
- * an initiate a bus reset. */
- int (*set_config_rom) (struct fw_card *card,
- u32 *config_rom, size_t length);
+ * an initiate a bus reset.
+ */
+ int (*set_config_rom)(struct fw_card *card,
+ u32 *config_rom, size_t length);
- void (*send_request) (struct fw_card *card, struct fw_packet *packet);
- void (*send_response) (struct fw_card *card, struct fw_packet *packet);
+ void (*send_request)(struct fw_card *card, struct fw_packet *packet);
+ void (*send_response)(struct fw_card *card, struct fw_packet *packet);
/* Calling cancel is valid once a packet has been submitted. */
- int (*cancel_packet) (struct fw_card *card, struct fw_packet *packet);
+ int (*cancel_packet)(struct fw_card *card, struct fw_packet *packet);
- /* Allow the specified node ID to do direct DMA out and in of
+ /*
+ * Allow the specified node ID to do direct DMA out and in of
* host memory. The card will disable this for all node when
* a bus reset happens, so driver need to reenable this after
* bus reset. Returns 0 on success, -ENODEV if the card
* doesn't support this, -ESTALE if the generation doesn't
- * match. */
- int (*enable_phys_dma) (struct fw_card *card,
- int node_id, int generation);
+ * match.
+ */
+ int (*enable_phys_dma)(struct fw_card *card,
+ int node_id, int generation);
+
+ u64 (*get_bus_time)(struct fw_card *card);
struct fw_iso_context *
- (*allocate_iso_context)(struct fw_card *card, int type);
+ (*allocate_iso_context)(struct fw_card *card,
+ int type, size_t header_size);
void (*free_iso_context)(struct fw_iso_context *ctx);
- int (*start_iso)(struct fw_iso_context *ctx, s32 cycle);
+ int (*start_iso)(struct fw_iso_context *ctx,
+ s32 cycle, u32 sync, u32 tags);
int (*queue_iso)(struct fw_iso_context *ctx,
struct fw_iso_packet *packet,
void fw_send_phy_config(struct fw_card *card,
int node_id, int generation, int gap_count);
-/* Called by the topology code to inform the device code of node
- * activity; found, lost, or updated nodes */
+/*
+ * Called by the topology code to inform the device code of node
+ * activity; found, lost, or updated nodes.
+ */
void
fw_node_event(struct fw_card *card, struct fw_node *node, int event);
/* API used by card level drivers */
-/* Do we need phy speed here also? If we add more args, maybe we
- should go back to struct fw_card_info. */
void
fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver,
struct device *device);