{
u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
u32 m, n, fastclk;
- u32 updrate, minupdate, fracbits, p;
+ u32 updrate, minupdate, p;
unsigned long bestppm, ppm, absppm;
int dotclk, flag;
fastclk = dotclk / (2*100);
updrate = 0;
minupdate = 19200;
- fracbits = 1;
n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
bestm1 = bestm2 = bestp1 = bestp2 = 0;
return 0;
err_unpin:
- i915_gem_object_unpin(obj);
+ i915_gem_object_unpin_from_display_plane(obj);
err_interruptible:
dev_priv->mm.interruptible = true;
return ret;
void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
{
i915_gem_object_unpin_fence(obj);
- i915_gem_object_unpin(obj);
+ i915_gem_object_unpin_from_display_plane(obj);
}
/* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp, i;
+ u32 reg, temp, i, j;
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
for train result */
DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
I915_READ(FDI_RX_IIR(pipe)));
- /* enable CPU FDI TX and PCH FDI RX */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_DP_PORT_WIDTH_MASK;
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
- temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
- temp |= FDI_COMPOSITE_SYNC;
- I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
- I915_WRITE(FDI_RX_MISC(pipe),
- FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_AUTO;
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
- temp |= FDI_COMPOSITE_SYNC;
- I915_WRITE(reg, temp | FDI_RX_ENABLE);
+ /* Try each vswing and preemphasis setting twice before moving on */
+ for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
+ /* disable first in case we need to retry */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
+ temp &= ~FDI_TX_ENABLE;
+ I915_WRITE(reg, temp);
- POSTING_READ(reg);
- udelay(150);
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_AUTO;
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp &= ~FDI_RX_ENABLE;
+ I915_WRITE(reg, temp);
- for (i = 0; i < 4; i++) {
+ /* enable CPU FDI TX and PCH FDI RX */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[i];
- I915_WRITE(reg, temp);
+ temp |= snb_b_fdi_train_param[j/2];
+ temp |= FDI_COMPOSITE_SYNC;
+ I915_WRITE(reg, temp | FDI_TX_ENABLE);
- POSTING_READ(reg);
- udelay(500);
+ I915_WRITE(FDI_RX_MISC(pipe),
+ FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
- reg = FDI_RX_IIR(pipe);
+ reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_BIT_LOCK ||
- (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i);
- break;
- }
- }
- if (i == 4)
- DRM_ERROR("FDI train 1 fail!\n");
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
+ I915_WRITE(reg, temp | FDI_RX_ENABLE);
- /* Train 2 */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE_IVB;
- temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
- I915_WRITE(reg, temp);
+ POSTING_READ(reg);
+ udelay(1); /* should be 0.5us */
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
- I915_WRITE(reg, temp);
+ for (i = 0; i < 4; i++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
- POSTING_READ(reg);
- udelay(150);
+ if (temp & FDI_RX_BIT_LOCK ||
+ (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
+ i);
+ break;
+ }
+ udelay(1); /* should be 0.5us */
+ }
+ if (i == 4) {
+ DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
+ continue;
+ }
- for (i = 0; i < 4; i++) {
+ /* Train 2 */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[i];
+ temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
I915_WRITE(reg, temp);
POSTING_READ(reg);
- udelay(500);
+ udelay(2); /* should be 1.5us */
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ for (i = 0; i < 4; i++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i);
- break;
+ if (temp & FDI_RX_SYMBOL_LOCK ||
+ (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
+ i);
+ goto train_done;
+ }
+ udelay(2); /* should be 1.5us */
}
+ if (i == 4)
+ DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
}
- if (i == 4)
- DRM_ERROR("FDI train 2 fail!\n");
+train_done:
DRM_DEBUG_KMS("FDI train done.\n");
}
int pipe = crtc->pipe;
u32 dpll, mdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
- bool is_hdmi;
u32 coreclk, reg_val, dpll_md;
mutex_lock(&dev_priv->dpio_lock);
- is_hdmi = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
-
bestn = crtc->config.dpll.n;
bestm1 = crtc->config.dpll.m1;
bestm2 = crtc->config.dpll.m2;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
struct intel_crtc *crtc;
unsigned long irqflags;
- uint32_t val, pch_hpd_mask;
-
- pch_hpd_mask = SDE_PORTB_HOTPLUG_CPT | SDE_PORTC_HOTPLUG_CPT;
- if (!(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE))
- pch_hpd_mask |= SDE_PORTD_HOTPLUG_CPT | SDE_CRT_HOTPLUG_CPT;
+ uint32_t val;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
WARN(crtc->base.enabled, "CRTC for pipe %c enabled\n",
WARN((val & ~DE_PCH_EVENT_IVB) != val,
"Unexpected DEIMR bits enabled: 0x%x\n", val);
val = I915_READ(SDEIMR);
- WARN((val & ~pch_hpd_mask) != val,
+ WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff,
"Unexpected SDEIMR bits enabled: 0x%x\n", val);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
return;
+ /* Make sure we're not on PC8 state before disabling PC8, otherwise
+ * we'll hang the machine! */
+ dev_priv->uncore.funcs.force_wake_get(dev_priv);
+
if (val & LCPLL_POWER_DOWN_ALLOW) {
val &= ~LCPLL_POWER_DOWN_ALLOW;
I915_WRITE(LCPLL_CTL, val);
+ POSTING_READ(LCPLL_CTL);
}
val = I915_READ(D_COMP);
val |= D_COMP_COMP_FORCE;
val &= ~D_COMP_COMP_DISABLE;
I915_WRITE(D_COMP, val);
- I915_READ(D_COMP);
+ POSTING_READ(D_COMP);
val = I915_READ(LCPLL_CTL);
val &= ~LCPLL_PLL_DISABLE;
LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
DRM_ERROR("Switching back to LCPLL failed\n");
}
+
+ dev_priv->uncore.funcs.force_wake_put(dev_priv);
+}
+
+void hsw_enable_pc8_work(struct work_struct *__work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(to_delayed_work(__work), struct drm_i915_private,
+ pc8.enable_work);
+ struct drm_device *dev = dev_priv->dev;
+ uint32_t val;
+
+ if (dev_priv->pc8.enabled)
+ return;
+
+ DRM_DEBUG_KMS("Enabling package C8+\n");
+
+ dev_priv->pc8.enabled = true;
+
+ if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
+
+ lpt_disable_clkout_dp(dev);
+ hsw_pc8_disable_interrupts(dev);
+ hsw_disable_lcpll(dev_priv, true, true);
+}
+
+static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
+{
+ WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
+ WARN(dev_priv->pc8.disable_count < 1,
+ "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
+
+ dev_priv->pc8.disable_count--;
+ if (dev_priv->pc8.disable_count != 0)
+ return;
+
+ schedule_delayed_work(&dev_priv->pc8.enable_work,
+ msecs_to_jiffies(i915_pc8_timeout));
+}
+
+static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ uint32_t val;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
+ WARN(dev_priv->pc8.disable_count < 0,
+ "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
+
+ dev_priv->pc8.disable_count++;
+ if (dev_priv->pc8.disable_count != 1)
+ return;
+
+ cancel_delayed_work_sync(&dev_priv->pc8.enable_work);
+ if (!dev_priv->pc8.enabled)
+ return;
+
+ DRM_DEBUG_KMS("Disabling package C8+\n");
+
+ hsw_restore_lcpll(dev_priv);
+ hsw_pc8_restore_interrupts(dev);
+ lpt_init_pch_refclk(dev);
+
+ if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val |= PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
+
+ intel_prepare_ddi(dev);
+ i915_gem_init_swizzling(dev);
+ mutex_lock(&dev_priv->rps.hw_lock);
+ gen6_update_ring_freq(dev);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ dev_priv->pc8.enabled = false;
+}
+
+void hsw_enable_package_c8(struct drm_i915_private *dev_priv)
+{
+ mutex_lock(&dev_priv->pc8.lock);
+ __hsw_enable_package_c8(dev_priv);
+ mutex_unlock(&dev_priv->pc8.lock);
+}
+
+void hsw_disable_package_c8(struct drm_i915_private *dev_priv)
+{
+ mutex_lock(&dev_priv->pc8.lock);
+ __hsw_disable_package_c8(dev_priv);
+ mutex_unlock(&dev_priv->pc8.lock);
+}
+
+static bool hsw_can_enable_package_c8(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *crtc;
+ uint32_t val;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
+ if (crtc->base.enabled)
+ return false;
+
+ /* This case is still possible since we have the i915.disable_power_well
+ * parameter and also the KVMr or something else might be requesting the
+ * power well. */
+ val = I915_READ(HSW_PWR_WELL_DRIVER);
+ if (val != 0) {
+ DRM_DEBUG_KMS("Not enabling PC8: power well on\n");
+ return false;
+ }
+
+ return true;
+}
+
+/* Since we're called from modeset_global_resources there's no way to
+ * symmetrically increase and decrease the refcount, so we use
+ * dev_priv->pc8.requirements_met to track whether we already have the refcount
+ * or not.
+ */
+static void hsw_update_package_c8(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ bool allow;
+
+ if (!i915_enable_pc8)
+ return;
+
+ mutex_lock(&dev_priv->pc8.lock);
+
+ allow = hsw_can_enable_package_c8(dev_priv);
+
+ if (allow == dev_priv->pc8.requirements_met)
+ goto done;
+
+ dev_priv->pc8.requirements_met = allow;
+
+ if (allow)
+ __hsw_enable_package_c8(dev_priv);
+ else
+ __hsw_disable_package_c8(dev_priv);
+
+done:
+ mutex_unlock(&dev_priv->pc8.lock);
+}
+
+static void hsw_package_c8_gpu_idle(struct drm_i915_private *dev_priv)
+{
+ if (!dev_priv->pc8.gpu_idle) {
+ dev_priv->pc8.gpu_idle = true;
+ hsw_enable_package_c8(dev_priv);
+ }
+}
+
+static void hsw_package_c8_gpu_busy(struct drm_i915_private *dev_priv)
+{
+ if (dev_priv->pc8.gpu_idle) {
+ dev_priv->pc8.gpu_idle = false;
+ hsw_disable_package_c8(dev_priv);
+ }
}
static void haswell_modeset_global_resources(struct drm_device *dev)
}
intel_set_power_well(dev, enable);
+
+ hsw_update_package_c8(dev);
}
static int haswell_crtc_mode_set(struct drm_crtc *crtc,
if (intel_crtc->cursor_bo != obj)
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
- i915_gem_object_unpin(intel_crtc->cursor_bo);
+ i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
}
return 0;
fail_unpin:
- i915_gem_object_unpin(obj);
+ i915_gem_object_unpin_from_display_plane(obj);
fail_locked:
mutex_unlock(&dev->struct_mutex);
fail:
void intel_mark_busy(struct drm_device *dev)
{
- i915_update_gfx_val(dev->dev_private);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ hsw_package_c8_gpu_busy(dev_priv);
+ i915_update_gfx_val(dev_priv);
}
void intel_mark_idle(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
+ hsw_package_c8_gpu_idle(dev_priv);
+
if (!i915_powersave)
return;
static int intel_gen2_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ uint32_t flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static int intel_gen3_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ uint32_t flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static int intel_gen4_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ uint32_t flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static int intel_gen6_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ uint32_t flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static int intel_gen7_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ uint32_t flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static int intel_default_queue_flip(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj)
+ struct drm_i915_gem_object *obj,
+ uint32_t flags)
{
return -ENODEV;
}
static int intel_crtc_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
- struct drm_pending_vblank_event *event)
+ struct drm_pending_vblank_event *event,
+ uint32_t page_flip_flags)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
atomic_inc(&intel_crtc->unpin_work_count);
intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
- ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
+ ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags);
if (ret)
goto cleanup_pending;
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
base.head) {
+ enum pipe pipe;
if (encoder->base.crtc != &crtc->base)
continue;
- if (encoder->get_config)
+ if (encoder->get_config &&
+ encoder->get_hw_state(encoder, &pipe))
encoder->get_config(encoder, &pipe_config);
}
drm_mode_debug_printmodeline(set->mode);
config->mode_changed = true;
}
+
+ DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
+ set->crtc->base.id, config->mode_changed, config->fb_changed);
}
static int
struct drm_crtc *new_crtc;
struct intel_connector *connector;
struct intel_encoder *encoder;
- int count, ro;
+ int ro;
/* The upper layers ensure that we either disable a crtc or have a list
* of connectors. For paranoia, double-check this. */
WARN_ON(!set->fb && (set->num_connectors != 0));
WARN_ON(set->fb && (set->num_connectors == 0));
- count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
/* Otherwise traverse passed in connector list and get encoders
/* connector->new_encoder is now updated for all connectors. */
/* Update crtc of enabled connectors. */
- count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
if (!connector->new_encoder)
struct drm_i915_private *dev_priv = dev->dev_private;
u32 vga_reg = i915_vgacntrl_reg(dev);
+ /* This function can be called both from intel_modeset_setup_hw_state or
+ * at a very early point in our resume sequence, where the power well
+ * structures are not yet restored. Since this function is at a very
+ * paranoid "someone might have enabled VGA while we were not looking"
+ * level, just check if the power well is enabled instead of trying to
+ * follow the "don't touch the power well if we don't need it" policy
+ * the rest of the driver uses. */
+ if (HAS_POWER_WELL(dev) &&
+ (I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_STATE_ENABLED) == 0)
+ return;
+
if (I915_READ(vga_reg) != VGA_DISP_DISABLE) {
DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
i915_disable_vga(dev);
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
- struct intel_crtc *intel_crtc;
/*
* Interrupts and polling as the first thing to avoid creating havoc.
if (!crtc->fb)
continue;
- intel_crtc = to_intel_crtc(crtc);
intel_increase_pllclock(crtc);
}
u32 power_well_driver;
+ int num_transcoders;
+
struct intel_cursor_error_state {
u32 control;
u32 position;
} cursor[I915_MAX_PIPES];
struct intel_pipe_error_state {
- enum transcoder cpu_transcoder;
- u32 conf;
u32 source;
-
- u32 htotal;
- u32 hblank;
- u32 hsync;
- u32 vtotal;
- u32 vblank;
- u32 vsync;
} pipe[I915_MAX_PIPES];
struct intel_plane_error_state {
u32 surface;
u32 tile_offset;
} plane[I915_MAX_PIPES];
+
+ struct intel_transcoder_error_state {
+ enum transcoder cpu_transcoder;
+
+ u32 conf;
+
+ u32 htotal;
+ u32 hblank;
+ u32 hsync;
+ u32 vtotal;
+ u32 vblank;
+ u32 vsync;
+ } transcoder[4];
};
struct intel_display_error_state *
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_display_error_state *error;
- enum transcoder cpu_transcoder;
+ int transcoders[] = {
+ TRANSCODER_A,
+ TRANSCODER_B,
+ TRANSCODER_C,
+ TRANSCODER_EDP,
+ };
int i;
+ if (INTEL_INFO(dev)->num_pipes == 0)
+ return NULL;
+
error = kmalloc(sizeof(*error), GFP_ATOMIC);
if (error == NULL)
return NULL;
error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
for_each_pipe(i) {
- cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
- error->pipe[i].cpu_transcoder = cpu_transcoder;
-
if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
error->cursor[i].control = I915_READ(CURCNTR(i));
error->cursor[i].position = I915_READ(CURPOS(i));
error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
}
- error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
error->pipe[i].source = I915_READ(PIPESRC(i));
- error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
- error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder));
- error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder));
- error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
- error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder));
- error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder));
+ }
+
+ error->num_transcoders = INTEL_INFO(dev)->num_pipes;
+ if (HAS_DDI(dev_priv->dev))
+ error->num_transcoders++; /* Account for eDP. */
+
+ for (i = 0; i < error->num_transcoders; i++) {
+ enum transcoder cpu_transcoder = transcoders[i];
+
+ error->transcoder[i].cpu_transcoder = cpu_transcoder;
+
+ error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
+ error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
+ error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
+ error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
+ error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
+ error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
+ error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
}
/* In the code above we read the registers without checking if the power
{
int i;
+ if (!error)
+ return;
+
err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
if (HAS_POWER_WELL(dev))
err_printf(m, "PWR_WELL_CTL2: %08x\n",
error->power_well_driver);
for_each_pipe(i) {
err_printf(m, "Pipe [%d]:\n", i);
- err_printf(m, " CPU transcoder: %c\n",
- transcoder_name(error->pipe[i].cpu_transcoder));
- err_printf(m, " CONF: %08x\n", error->pipe[i].conf);
err_printf(m, " SRC: %08x\n", error->pipe[i].source);
- err_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
- err_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
- err_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
- err_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
- err_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
- err_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
err_printf(m, "Plane [%d]:\n", i);
err_printf(m, " CNTR: %08x\n", error->plane[i].control);
err_printf(m, " POS: %08x\n", error->cursor[i].position);
err_printf(m, " BASE: %08x\n", error->cursor[i].base);
}
+
+ for (i = 0; i < error->num_transcoders; i++) {
+ err_printf(m, " CPU transcoder: %c\n",
+ transcoder_name(error->transcoder[i].cpu_transcoder));
+ err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
+ err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
+ err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
+ err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
+ err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
+ err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
+ err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);
+ }
}
projects / karo-tx-linux.git / blobdiff