#include <drm/i915_drm.h>
#include "i915_drv.h"
-#define DP_RECEIVER_CAP_SIZE 0xf
-#define DP_LINK_STATUS_SIZE 6
#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
/**
*/
static bool is_edp(struct intel_dp *intel_dp)
{
- return intel_dp->base.type == INTEL_OUTPUT_EDP;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+
+ return intel_dig_port->base.type == INTEL_OUTPUT_EDP;
}
/**
return is_edp(intel_dp) && !is_pch_edp(intel_dp);
}
-static struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
+static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp)
{
- return container_of(encoder, struct intel_dp, base.base);
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+
+ return intel_dig_port->base.base.dev;
}
static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
{
- return container_of(intel_attached_encoder(connector),
- struct intel_dp, base);
+ return enc_to_intel_dp(&intel_attached_encoder(connector)->base);
}
/**
return is_pch_edp(intel_dp);
}
-static void intel_dp_start_link_train(struct intel_dp *intel_dp);
-static void intel_dp_complete_link_train(struct intel_dp *intel_dp);
static void intel_dp_link_down(struct intel_dp *intel_dp);
void
intel_edp_link_config(struct intel_encoder *intel_encoder,
int *lane_num, int *link_bw)
{
- struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
*lane_num = intel_dp->lane_count;
- if (intel_dp->link_bw == DP_LINK_BW_1_62)
- *link_bw = 162000;
- else if (intel_dp->link_bw == DP_LINK_BW_2_7)
- *link_bw = 270000;
+ *link_bw = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
}
int
intel_edp_target_clock(struct intel_encoder *intel_encoder,
struct drm_display_mode *mode)
{
- struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
+ struct intel_connector *intel_connector = intel_dp->attached_connector;
- if (intel_dp->panel_fixed_mode)
- return intel_dp->panel_fixed_mode->clock;
+ if (intel_connector->panel.fixed_mode)
+ return intel_connector->panel.fixed_mode->clock;
else
return mode->clock;
}
-static int
-intel_dp_max_lane_count(struct intel_dp *intel_dp)
-{
- int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
- switch (max_lane_count) {
- case 1: case 2: case 4:
- break;
- default:
- max_lane_count = 4;
- }
- return max_lane_count;
-}
-
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
return max_link_bw;
}
-static int
-intel_dp_link_clock(uint8_t link_bw)
-{
- if (link_bw == DP_LINK_BW_2_7)
- return 270000;
- else
- return 162000;
-}
-
/*
* The units on the numbers in the next two are... bizarre. Examples will
* make it clearer; this one parallels an example in the eDP spec.
struct drm_display_mode *mode,
bool adjust_mode)
{
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
- int max_lanes = intel_dp_max_lane_count(intel_dp);
+ int max_link_clock =
+ drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
+ int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
int max_rate, mode_rate;
mode_rate = intel_dp_link_required(mode->clock, 24);
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+ struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
- if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
- if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
+ if (is_edp(intel_dp) && fixed_mode) {
+ if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
- if (mode->vdisplay > intel_dp->panel_fixed_mode->vdisplay)
+ if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
}
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t clkcfg;
+ /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
+ if (IS_VALLEYVIEW(dev))
+ return 200;
+
clkcfg = I915_READ(CLKCFG);
switch (clkcfg & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_400:
static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
static void
intel_dp_check_edp(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
if (!is_edp(intel_dp))
}
}
+static uint32_t
+intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = intel_dp->output_reg + 0x10;
+ uint32_t status;
+ bool done;
+
+ if (IS_HASWELL(dev)) {
+ switch (intel_dig_port->port) {
+ case PORT_A:
+ ch_ctl = DPA_AUX_CH_CTL;
+ break;
+ case PORT_B:
+ ch_ctl = PCH_DPB_AUX_CH_CTL;
+ break;
+ case PORT_C:
+ ch_ctl = PCH_DPC_AUX_CH_CTL;
+ break;
+ case PORT_D:
+ ch_ctl = PCH_DPD_AUX_CH_CTL;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ if (has_aux_irq)
+ done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+ else
+ done = wait_for_atomic(C, 10) == 0;
+ if (!done)
+ DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
+ has_aux_irq);
+#undef C
+
+ return status;
+}
+
static int
intel_dp_aux_ch(struct intel_dp *intel_dp,
uint8_t *send, int send_bytes,
uint8_t *recv, int recv_size)
{
uint32_t output_reg = intel_dp->output_reg;
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t ch_ctl = output_reg + 0x10;
uint32_t ch_data = ch_ctl + 4;
- int i;
- int recv_bytes;
+ int i, ret, recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
int try, precharge;
+ bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
+
+ /* dp aux is extremely sensitive to irq latency, hence request the
+ * lowest possible wakeup latency and so prevent the cpu from going into
+ * deep sleep states.
+ */
+ pm_qos_update_request(&dev_priv->pm_qos, 0);
+
+ if (IS_HASWELL(dev)) {
+ switch (intel_dig_port->port) {
+ case PORT_A:
+ ch_ctl = DPA_AUX_CH_CTL;
+ ch_data = DPA_AUX_CH_DATA1;
+ break;
+ case PORT_B:
+ ch_ctl = PCH_DPB_AUX_CH_CTL;
+ ch_data = PCH_DPB_AUX_CH_DATA1;
+ break;
+ case PORT_C:
+ ch_ctl = PCH_DPC_AUX_CH_CTL;
+ ch_data = PCH_DPC_AUX_CH_DATA1;
+ break;
+ case PORT_D:
+ ch_ctl = PCH_DPD_AUX_CH_CTL;
+ ch_data = PCH_DPD_AUX_CH_DATA1;
+ break;
+ default:
+ BUG();
+ }
+ }
intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
* clock divider.
*/
if (is_cpu_edp(intel_dp)) {
- if (IS_GEN6(dev) || IS_GEN7(dev))
+ if (HAS_DDI(dev))
+ aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
+ else if (IS_VALLEYVIEW(dev))
+ aux_clock_divider = 100;
+ else if (IS_GEN6(dev) || IS_GEN7(dev))
aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
else
aux_clock_divider = 225; /* eDP input clock at 450Mhz */
} else if (HAS_PCH_SPLIT(dev))
- aux_clock_divider = 63; /* IRL input clock fixed at 125Mhz */
+ aux_clock_divider = DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
else
aux_clock_divider = intel_hrawclk(dev) / 2;
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
- status = I915_READ(ch_ctl);
+ status = I915_READ_NOTRACE(ch_ctl);
if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
break;
msleep(1);
if (try == 3) {
WARN(1, "dp_aux_ch not started status 0x%08x\n",
I915_READ(ch_ctl));
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/* Must try at least 3 times according to DP spec */
/* Send the command and wait for it to complete */
I915_WRITE(ch_ctl,
DP_AUX_CH_CTL_SEND_BUSY |
+ (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_TIME_OUT_400us |
(send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR);
- for (;;) {
- status = I915_READ(ch_ctl);
- if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
- break;
- udelay(100);
- }
+
+ status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
/* Clear done status and any errors */
I915_WRITE(ch_ctl,
if ((status & DP_AUX_CH_CTL_DONE) == 0) {
DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/* Check for timeout or receive error.
*/
if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
/* Timeouts occur when the device isn't connected, so they're
* "normal" -- don't fill the kernel log with these */
if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto out;
}
/* Unload any bytes sent back from the other side */
unpack_aux(I915_READ(ch_data + i),
recv + i, recv_bytes - i);
- return recv_bytes;
+ ret = recv_bytes;
+out:
+ pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
+
+ return ret;
}
/* Write data to the aux channel in native mode */
return -EREMOTEIO;
}
-static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp);
-static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
-
static int
intel_dp_i2c_init(struct intel_dp *intel_dp,
struct intel_connector *intel_connector, const char *name)
return ret;
}
-static bool
+bool
intel_dp_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct intel_connector *intel_connector = intel_dp->attached_connector;
int lane_count, clock;
- int max_lane_count = intel_dp_max_lane_count(intel_dp);
+ int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
int bpp, mode_rate;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
- if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
- intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode);
- intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN,
+ if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
+ intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
+ adjusted_mode);
+ intel_pch_panel_fitting(dev,
+ intel_connector->panel.fitting_mode,
mode, adjusted_mode);
}
for (clock = 0; clock <= max_clock; clock++) {
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
- int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
+ int link_bw_clock =
+ drm_dp_bw_code_to_link_rate(bws[clock]);
+ int link_avail = intel_dp_max_data_rate(link_bw_clock,
+ lane_count);
if (mode_rate <= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+ adjusted_mode->clock = link_bw_clock;
DRM_DEBUG_KMS("DP link bw %02x lane "
"count %d clock %d bpp %d\n",
intel_dp->link_bw, intel_dp->lane_count,
return false;
}
-struct intel_dp_m_n {
- uint32_t tu;
- uint32_t gmch_m;
- uint32_t gmch_n;
- uint32_t link_m;
- uint32_t link_n;
-};
-
-static void
-intel_reduce_ratio(uint32_t *num, uint32_t *den)
-{
- while (*num > 0xffffff || *den > 0xffffff) {
- *num >>= 1;
- *den >>= 1;
- }
-}
-
-static void
-intel_dp_compute_m_n(int bpp,
- int nlanes,
- int pixel_clock,
- int link_clock,
- struct intel_dp_m_n *m_n)
-{
- m_n->tu = 64;
- m_n->gmch_m = (pixel_clock * bpp) >> 3;
- m_n->gmch_n = link_clock * nlanes;
- intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- m_n->link_m = pixel_clock;
- m_n->link_n = link_clock;
- intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
-}
-
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = crtc->dev;
- struct intel_encoder *encoder;
+ struct intel_encoder *intel_encoder;
+ struct intel_dp *intel_dp;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int lane_count = 4;
- struct intel_dp_m_n m_n;
+ struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
+ enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
/*
* Find the lane count in the intel_encoder private
*/
- for_each_encoder_on_crtc(dev, crtc, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ intel_dp = enc_to_intel_dp(&intel_encoder->base);
- if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
- intel_dp->base.type == INTEL_OUTPUT_EDP)
+ if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
+ intel_encoder->type == INTEL_OUTPUT_EDP)
{
lane_count = intel_dp->lane_count;
break;
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
- intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
-
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(TRANSDATA_M1(pipe),
- ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
- m_n.gmch_m);
+ intel_link_compute_m_n(intel_crtc->bpp, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
+
+ if (IS_HASWELL(dev)) {
+ I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
+ TU_SIZE(m_n.tu) | m_n.gmch_m);
+ I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
+ I915_WRITE(PIPE_LINK_M1(cpu_transcoder), m_n.link_m);
+ I915_WRITE(PIPE_LINK_N1(cpu_transcoder), m_n.link_n);
+ } else if (HAS_PCH_SPLIT(dev)) {
+ I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
I915_WRITE(TRANSDATA_N1(pipe), m_n.gmch_n);
I915_WRITE(TRANSDPLINK_M1(pipe), m_n.link_m);
I915_WRITE(TRANSDPLINK_N1(pipe), m_n.link_n);
+ } else if (IS_VALLEYVIEW(dev)) {
+ I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+ I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+ I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+ I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
} else {
I915_WRITE(PIPE_GMCH_DATA_M(pipe),
- ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
- m_n.gmch_m);
+ TU_SIZE(m_n.tu) | m_n.gmch_m);
I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n);
I915_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m);
I915_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n);
}
}
+void intel_dp_init_link_config(struct intel_dp *intel_dp)
+{
+ memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+ intel_dp->link_configuration[0] = intel_dp->link_bw;
+ intel_dp->link_configuration[1] = intel_dp->lane_count;
+ intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
+ /*
+ * Check for DPCD version > 1.1 and enhanced framing support
+ */
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+ (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
+ intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ }
+}
+
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ /* For a long time we've carried around a ILK-DevA w/a for the
+ * 160MHz clock. If we're really unlucky, it's still required.
+ */
+ DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+
+ I915_WRITE(DP_A, dpa_ctl);
+
+ POSTING_READ(DP_A);
+ udelay(500);
+}
+
static void
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
/*
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
intel_write_eld(encoder, adjusted_mode);
}
- memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
- intel_dp->link_configuration[0] = intel_dp->link_bw;
- intel_dp->link_configuration[1] = intel_dp->lane_count;
- intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
- /*
- * Check for DPCD version > 1.1 and enhanced framing support
- */
- if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
- (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
- intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
- }
+
+ intel_dp_init_link_config(intel_dp);
/* Split out the IBX/CPU vs CPT settings */
- if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
+ if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
intel_dp->DP |= DP_SYNC_HS_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
+
+ if (is_cpu_edp(intel_dp))
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
}
#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
u32 mask,
u32 value)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
return control;
}
-static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
+void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
{
struct intel_dp *intel_dp = container_of(to_delayed_work(__work),
struct intel_dp, panel_vdd_work);
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
mutex_lock(&dev->mode_config.mutex);
ironlake_panel_vdd_off_sync(intel_dp);
mutex_unlock(&dev->mode_config.mutex);
}
-static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
{
if (!is_edp(intel_dp))
return;
}
}
-static void ironlake_edp_panel_on(struct intel_dp *intel_dp)
+void ironlake_edp_panel_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
}
}
-static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
+void ironlake_edp_panel_off(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
ironlake_wait_panel_off(intel_dp);
}
-static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
+void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = to_intel_crtc(intel_dig_port->base.base.crtc)->pipe;
u32 pp;
if (!is_edp(intel_dp))
pp |= EDP_BLC_ENABLE;
I915_WRITE(PCH_PP_CONTROL, pp);
POSTING_READ(PCH_PP_CONTROL);
+
+ intel_panel_enable_backlight(dev, pipe);
}
-static void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
+void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
if (!is_edp(intel_dp))
return;
+ intel_panel_disable_backlight(dev);
+
DRM_DEBUG_KMS("\n");
pp = ironlake_get_pp_control(dev_priv);
pp &= ~EDP_BLC_ENABLE;
static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+ struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+ struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
}
/* If the sink supports it, try to set the power state appropriately */
-static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
+void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
{
int ret, i;
return true;
}
}
- }
- DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", intel_dp->output_reg);
+ DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
+ intel_dp->output_reg);
+ }
return true;
}
DP_LINK_STATUS_SIZE);
}
-static uint8_t
-intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
- int r)
-{
- return link_status[r - DP_LANE0_1_STATUS];
-}
-
-static uint8_t
-intel_get_adjust_request_voltage(uint8_t adjust_request[2],
- int lane)
-{
- int s = ((lane & 1) ?
- DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
- DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
- uint8_t l = adjust_request[lane>>1];
-
- return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
-}
-
-static uint8_t
-intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2],
- int lane)
-{
- int s = ((lane & 1) ?
- DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
- DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
- uint8_t l = adjust_request[lane>>1];
-
- return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
-}
-
-
#if 0
static char *voltage_names[] = {
"0.4V", "0.6V", "0.8V", "1.2V"
static uint8_t
intel_dp_voltage_max(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (IS_GEN7(dev) && is_cpu_edp(intel_dp))
return DP_TRAIN_VOLTAGE_SWING_800;
static uint8_t
intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
- if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+ if (IS_HASWELL(dev)) {
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_9_5;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+ } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_400:
return DP_TRAIN_PRE_EMPHASIS_6;
uint8_t v = 0;
uint8_t p = 0;
int lane;
- uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS);
uint8_t voltage_max;
uint8_t preemph_max;
for (lane = 0; lane < intel_dp->lane_count; lane++) {
- uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane);
- uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane);
+ uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
+ uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
if (this_v > v)
v = this_v;
}
static uint32_t
-intel_dp_signal_levels(uint8_t train_set)
+intel_gen4_signal_levels(uint8_t train_set)
{
uint32_t signal_levels = 0;
}
}
-static uint8_t
-intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
- int lane)
+/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
+static uint32_t
+intel_hsw_signal_levels(uint8_t train_set)
{
- int s = (lane & 1) * 4;
- uint8_t l = link_status[lane>>1];
-
- return (l >> s) & 0xf;
-}
+ int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+ DP_TRAIN_PRE_EMPHASIS_MASK);
+ switch (signal_levels) {
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
+ return DDI_BUF_EMP_400MV_0DB_HSW;
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return DDI_BUF_EMP_400MV_3_5DB_HSW;
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
+ return DDI_BUF_EMP_400MV_6DB_HSW;
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_9_5:
+ return DDI_BUF_EMP_400MV_9_5DB_HSW;
-/* Check for clock recovery is done on all channels */
-static bool
-intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
-{
- int lane;
- uint8_t lane_status;
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+ return DDI_BUF_EMP_600MV_0DB_HSW;
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return DDI_BUF_EMP_600MV_3_5DB_HSW;
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
+ return DDI_BUF_EMP_600MV_6DB_HSW;
- for (lane = 0; lane < lane_count; lane++) {
- lane_status = intel_get_lane_status(link_status, lane);
- if ((lane_status & DP_LANE_CR_DONE) == 0)
- return false;
+ case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
+ return DDI_BUF_EMP_800MV_0DB_HSW;
+ case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return DDI_BUF_EMP_800MV_3_5DB_HSW;
+ default:
+ DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+ "0x%x\n", signal_levels);
+ return DDI_BUF_EMP_400MV_0DB_HSW;
}
- return true;
}
-/* Check to see if channel eq is done on all channels */
-#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
- DP_LANE_CHANNEL_EQ_DONE|\
- DP_LANE_SYMBOL_LOCKED)
-static bool
-intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
-{
- uint8_t lane_align;
- uint8_t lane_status;
- int lane;
-
- lane_align = intel_dp_link_status(link_status,
- DP_LANE_ALIGN_STATUS_UPDATED);
- if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
- return false;
- for (lane = 0; lane < intel_dp->lane_count; lane++) {
- lane_status = intel_get_lane_status(link_status, lane);
- if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
- return false;
+/* Properly updates "DP" with the correct signal levels. */
+static void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ uint32_t signal_levels, mask;
+ uint8_t train_set = intel_dp->train_set[0];
+
+ if (IS_HASWELL(dev)) {
+ signal_levels = intel_hsw_signal_levels(train_set);
+ mask = DDI_BUF_EMP_MASK;
+ } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+ signal_levels = intel_gen7_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+ } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+ signal_levels = intel_gen6_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+ } else {
+ signal_levels = intel_gen4_signal_levels(train_set);
+ mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
}
- return true;
+
+ DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
+
+ *DP = (*DP & ~mask) | signal_levels;
}
static bool
uint32_t dp_reg_value,
uint8_t dp_train_pat)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ enum port port = intel_dig_port->port;
int ret;
+ uint32_t temp;
- if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
+ if (IS_HASWELL(dev)) {
+ temp = I915_READ(DP_TP_CTL(port));
+
+ if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
+ temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
+ else
+ temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
+
+ temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+ switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+ case DP_TRAINING_PATTERN_DISABLE:
+ temp |= DP_TP_CTL_LINK_TRAIN_IDLE;
+ I915_WRITE(DP_TP_CTL(port), temp);
+
+ if (wait_for((I915_READ(DP_TP_STATUS(port)) &
+ DP_TP_STATUS_IDLE_DONE), 1))
+ DRM_ERROR("Timed out waiting for DP idle patterns\n");
+
+ temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+ temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
+
+ break;
+ case DP_TRAINING_PATTERN_1:
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
+ break;
+ case DP_TRAINING_PATTERN_2:
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
+ break;
+ case DP_TRAINING_PATTERN_3:
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
+ break;
+ }
+ I915_WRITE(DP_TP_CTL(port), temp);
+
+ } else if (HAS_PCH_CPT(dev) &&
+ (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
dp_reg_value &= ~DP_LINK_TRAIN_MASK_CPT;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
}
/* Enable corresponding port and start training pattern 1 */
-static void
+void
intel_dp_start_link_train(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base;
+ struct drm_device *dev = encoder->dev;
int i;
uint8_t voltage;
bool clock_recovery = false;
int voltage_tries, loop_tries;
uint32_t DP = intel_dp->DP;
+ if (HAS_DDI(dev))
+ intel_ddi_prepare_link_retrain(encoder);
+
/* Write the link configuration data */
intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
intel_dp->link_configuration,
for (;;) {
/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
uint8_t link_status[DP_LINK_STATUS_SIZE];
- uint32_t signal_levels;
-
- if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
+ intel_dp_set_signal_levels(intel_dp, &DP);
+ /* Set training pattern 1 */
if (!intel_dp_set_link_train(intel_dp, DP,
DP_TRAINING_PATTERN_1 |
DP_LINK_SCRAMBLING_DISABLE))
break;
- /* Set training pattern 1 */
- udelay(100);
+ drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
if (!intel_dp_get_link_status(intel_dp, link_status)) {
DRM_ERROR("failed to get link status\n");
break;
}
- if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+ if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
DRM_DEBUG_KMS("clock recovery OK\n");
clock_recovery = true;
break;
intel_dp->DP = DP;
}
-static void
+void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
cr_tries = 0;
channel_eq = false;
for (;;) {
- /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
- uint32_t signal_levels;
uint8_t link_status[DP_LINK_STATUS_SIZE];
if (cr_tries > 5) {
break;
}
- if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* channel eq pattern */
if (!intel_dp_set_link_train(intel_dp, DP,
DP_LINK_SCRAMBLING_DISABLE))
break;
- udelay(400);
+ drm_dp_link_train_channel_eq_delay(intel_dp->dpcd);
if (!intel_dp_get_link_status(intel_dp, link_status))
break;
/* Make sure clock is still ok */
- if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+ if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
intel_dp_start_link_train(intel_dp);
cr_tries++;
continue;
}
- if (intel_channel_eq_ok(intel_dp, link_status)) {
+ if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
channel_eq = true;
break;
}
++tries;
}
+ if (channel_eq)
+ DRM_DEBUG_KMS("Channel EQ done. DP Training successfull\n");
+
intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE);
}
static void
intel_dp_link_down(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(intel_dig_port->base.base.crtc);
uint32_t DP = intel_dp->DP;
+ /*
+ * DDI code has a strict mode set sequence and we should try to respect
+ * it, otherwise we might hang the machine in many different ways. So we
+ * really should be disabling the port only on a complete crtc_disable
+ * sequence. This function is just called under two conditions on DDI
+ * code:
+ * - Link train failed while doing crtc_enable, and on this case we
+ * really should respect the mode set sequence and wait for a
+ * crtc_disable.
+ * - Someone turned the monitor off and intel_dp_check_link_status
+ * called us. We don't need to disable the whole port on this case, so
+ * when someone turns the monitor on again,
+ * intel_ddi_prepare_link_retrain will take care of redoing the link
+ * train.
+ */
+ if (HAS_DDI(dev))
+ return;
+
if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
return;
}
POSTING_READ(intel_dp->output_reg);
- msleep(17);
+ /* We don't really know why we're doing this */
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
if (HAS_PCH_IBX(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
/* Hardware workaround: leaving our transcoder select
* set to transcoder B while it's off will prevent the
/* Changes to enable or select take place the vblank
* after being written.
*/
- if (crtc == NULL) {
- /* We can arrive here never having been attached
- * to a CRTC, for instance, due to inheriting
- * random state from the BIOS.
- *
- * If the pipe is not running, play safe and
- * wait for the clocks to stabilise before
- * continuing.
- */
+ if (WARN_ON(crtc == NULL)) {
+ /* We should never try to disable a port without a crtc
+ * attached. For paranoia keep the code around for a
+ * bit. */
POSTING_READ(intel_dp->output_reg);
msleep(50);
} else
- intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
}
DP &= ~DP_AUDIO_OUTPUT_ENABLE;
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
+ char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
+
if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) == 0)
return false; /* aux transfer failed */
+ hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
+ 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
+ DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
return false; /* DPCD not present */
intel_dp_handle_test_request(struct intel_dp *intel_dp)
{
/* NAK by default */
- intel_dp_aux_native_write_1(intel_dp, DP_TEST_RESPONSE, DP_TEST_ACK);
+ intel_dp_aux_native_write_1(intel_dp, DP_TEST_RESPONSE, DP_TEST_NAK);
}
/*
* 4. Check link status on receipt of hot-plug interrupt
*/
-static void
+void
intel_dp_check_link_status(struct intel_dp *intel_dp)
{
+ struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
u8 sink_irq_vector;
u8 link_status[DP_LINK_STATUS_SIZE];
- if (!intel_dp->base.connectors_active)
+ if (!intel_encoder->connectors_active)
return;
- if (WARN_ON(!intel_dp->base.base.crtc))
+ if (WARN_ON(!intel_encoder->base.crtc))
return;
/* Try to read receiver status if the link appears to be up */
DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
}
- if (!intel_channel_eq_ok(intel_dp, link_status)) {
+ if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
- drm_get_encoder_name(&intel_dp->base.base));
+ drm_get_encoder_name(&intel_encoder->base));
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
}
static enum drm_connector_status
ironlake_dp_detect(struct intel_dp *intel_dp)
{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum drm_connector_status status;
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp)) {
- status = intel_panel_detect(intel_dp->base.base.dev);
+ status = intel_panel_detect(dev);
if (status == connector_status_unknown)
status = connector_status_connected;
return status;
}
+ if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
+ return connector_status_disconnected;
+
return intel_dp_detect_dpcd(intel_dp);
}
static enum drm_connector_status
g4x_dp_detect(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit;
static struct edid *
intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
- struct intel_dp *intel_dp = intel_attached_dp(connector);
- struct edid *edid;
- int size;
+ struct intel_connector *intel_connector = to_intel_connector(connector);
- if (is_edp(intel_dp)) {
- if (!intel_dp->edid)
+ /* use cached edid if we have one */
+ if (intel_connector->edid) {
+ struct edid *edid;
+ int size;
+
+ /* invalid edid */
+ if (IS_ERR(intel_connector->edid))
return NULL;
- size = (intel_dp->edid->extensions + 1) * EDID_LENGTH;
+ size = (intel_connector->edid->extensions + 1) * EDID_LENGTH;
edid = kmalloc(size, GFP_KERNEL);
if (!edid)
return NULL;
- memcpy(edid, intel_dp->edid, size);
+ memcpy(edid, intel_connector->edid, size);
return edid;
}
- edid = drm_get_edid(connector, adapter);
- return edid;
+ return drm_get_edid(connector, adapter);
}
static int
intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *adapter)
{
- struct intel_dp *intel_dp = intel_attached_dp(connector);
- int ret;
+ struct intel_connector *intel_connector = to_intel_connector(connector);
- if (is_edp(intel_dp)) {
- drm_mode_connector_update_edid_property(connector,
- intel_dp->edid);
- ret = drm_add_edid_modes(connector, intel_dp->edid);
- drm_edid_to_eld(connector,
- intel_dp->edid);
- return intel_dp->edid_mode_count;
+ /* use cached edid if we have one */
+ if (intel_connector->edid) {
+ /* invalid edid */
+ if (IS_ERR(intel_connector->edid))
+ return 0;
+
+ return intel_connector_update_modes(connector,
+ intel_connector->edid);
}
- ret = intel_ddc_get_modes(connector, adapter);
- return ret;
+ return intel_ddc_get_modes(connector, adapter);
}
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
- *
- * \return true if DP port is connected.
- * \return false if DP port is disconnected.
- */
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector, bool force)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- struct drm_device *dev = intel_dp->base.base.dev;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
+ struct drm_device *dev = connector->dev;
enum drm_connector_status status;
struct edid *edid = NULL;
else
status = g4x_dp_detect(intel_dp);
- DRM_DEBUG_KMS("DPCD: %02hx%02hx%02hx%02hx%02hx%02hx%02hx%02hx\n",
- intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2],
- intel_dp->dpcd[3], intel_dp->dpcd[4], intel_dp->dpcd[5],
- intel_dp->dpcd[6], intel_dp->dpcd[7]);
-
if (status != connector_status_connected)
return status;
}
}
+ if (intel_encoder->type != INTEL_OUTPUT_EDP)
+ intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
return connector_status_connected;
}
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+ struct drm_device *dev = connector->dev;
int ret;
/* We should parse the EDID data and find out if it has an audio sink
*/
ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
- if (ret) {
- if (is_edp(intel_dp) && !intel_dp->panel_fixed_mode) {
- struct drm_display_mode *newmode;
- list_for_each_entry(newmode, &connector->probed_modes,
- head) {
- if ((newmode->type & DRM_MODE_TYPE_PREFERRED)) {
- intel_dp->panel_fixed_mode =
- drm_mode_duplicate(dev, newmode);
- break;
- }
- }
- }
+ if (ret)
return ret;
- }
- /* if eDP has no EDID, try to use fixed panel mode from VBT */
- if (is_edp(intel_dp)) {
- /* initialize panel mode from VBT if available for eDP */
- if (intel_dp->panel_fixed_mode == NULL && dev_priv->lfp_lvds_vbt_mode != NULL) {
- intel_dp->panel_fixed_mode =
- drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
- if (intel_dp->panel_fixed_mode) {
- intel_dp->panel_fixed_mode->type |=
- DRM_MODE_TYPE_PREFERRED;
- }
- }
- if (intel_dp->panel_fixed_mode) {
- struct drm_display_mode *mode;
- mode = drm_mode_duplicate(dev, intel_dp->panel_fixed_mode);
+ /* if eDP has no EDID, fall back to fixed mode */
+ if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
+ struct drm_display_mode *mode;
+ mode = drm_mode_duplicate(dev,
+ intel_connector->panel.fixed_mode);
+ if (mode) {
drm_mode_probed_add(connector, mode);
return 1;
}
uint64_t val)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+ struct intel_encoder *intel_encoder = intel_attached_encoder(connector);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
int ret;
- ret = drm_connector_property_set_value(connector, property, val);
+ ret = drm_object_property_set_value(&connector->base, property, val);
if (ret)
return ret;
goto done;
}
+ if (is_edp(intel_dp) &&
+ property == connector->dev->mode_config.scaling_mode_property) {
+ if (val == DRM_MODE_SCALE_NONE) {
+ DRM_DEBUG_KMS("no scaling not supported\n");
+ return -EINVAL;
+ }
+
+ if (intel_connector->panel.fitting_mode == val) {
+ /* the eDP scaling property is not changed */
+ return 0;
+ }
+ intel_connector->panel.fitting_mode = val;
+
+ goto done;
+ }
+
return -EINVAL;
done:
- if (intel_dp->base.base.crtc) {
- struct drm_crtc *crtc = intel_dp->base.base.crtc;
- intel_set_mode(crtc, &crtc->mode,
- crtc->x, crtc->y, crtc->fb);
- }
+ if (intel_encoder->base.crtc)
+ intel_crtc_restore_mode(intel_encoder->base.crtc);
return 0;
}
{
struct drm_device *dev = connector->dev;
struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct intel_connector *intel_connector = to_intel_connector(connector);
- if (is_edp(intel_dp))
+ if (!IS_ERR_OR_NULL(intel_connector->edid))
+ kfree(intel_connector->edid);
+
+ if (is_edp(intel_dp)) {
intel_panel_destroy_backlight(dev);
+ intel_panel_fini(&intel_connector->panel);
+ }
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
-static void intel_dp_encoder_destroy(struct drm_encoder *encoder)
+void intel_dp_encoder_destroy(struct drm_encoder *encoder)
{
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+ struct intel_dp *intel_dp = &intel_dig_port->dp;
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
- kfree(intel_dp->edid);
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
ironlake_panel_vdd_off_sync(intel_dp);
}
- kfree(intel_dp);
+ kfree(intel_dig_port);
}
static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
static void
intel_dp_hot_plug(struct intel_encoder *intel_encoder)
{
- struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+ struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
intel_dp_check_link_status(intel_dp);
}
intel_trans_dp_port_sel(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
- struct intel_encoder *encoder;
+ struct intel_encoder *intel_encoder;
+ struct intel_dp *intel_dp;
- for_each_encoder_on_crtc(dev, crtc, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ intel_dp = enc_to_intel_dp(&intel_encoder->base);
- if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
- intel_dp->base.type == INTEL_OUTPUT_EDP)
+ if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
+ intel_encoder->type == INTEL_OUTPUT_EDP)
return intel_dp->output_reg;
}
static void
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
{
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
+
+ if (is_edp(intel_dp)) {
+ drm_mode_create_scaling_mode_property(connector->dev);
+ drm_object_attach_property(
+ &connector->base,
+ connector->dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_ASPECT);
+ intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
+ }
+}
+
+static void
+intel_dp_init_panel_power_sequencer(struct drm_device *dev,
+ struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct edp_power_seq cur, vbt, spec, final;
+ u32 pp_on, pp_off, pp_div, pp;
+
+ /* Workaround: Need to write PP_CONTROL with the unlock key as
+ * the very first thing. */
+ pp = ironlake_get_pp_control(dev_priv);
+ I915_WRITE(PCH_PP_CONTROL, pp);
+
+ pp_on = I915_READ(PCH_PP_ON_DELAYS);
+ pp_off = I915_READ(PCH_PP_OFF_DELAYS);
+ pp_div = I915_READ(PCH_PP_DIVISOR);
+
+ /* Pull timing values out of registers */
+ cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
+ PANEL_POWER_UP_DELAY_SHIFT;
+
+ cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
+ PANEL_LIGHT_ON_DELAY_SHIFT;
+
+ cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
+ PANEL_LIGHT_OFF_DELAY_SHIFT;
+
+ cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
+ PANEL_POWER_DOWN_DELAY_SHIFT;
+
+ cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
+ PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
+
+ DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+ cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
+
+ vbt = dev_priv->edp.pps;
+
+ /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
+ * our hw here, which are all in 100usec. */
+ spec.t1_t3 = 210 * 10;
+ spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */
+ spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */
+ spec.t10 = 500 * 10;
+ /* This one is special and actually in units of 100ms, but zero
+ * based in the hw (so we need to add 100 ms). But the sw vbt
+ * table multiplies it with 1000 to make it in units of 100usec,
+ * too. */
+ spec.t11_t12 = (510 + 100) * 10;
+
+ DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+ vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
+
+ /* Use the max of the register settings and vbt. If both are
+ * unset, fall back to the spec limits. */
+#define assign_final(field) final.field = (max(cur.field, vbt.field) == 0 ? \
+ spec.field : \
+ max(cur.field, vbt.field))
+ assign_final(t1_t3);
+ assign_final(t8);
+ assign_final(t9);
+ assign_final(t10);
+ assign_final(t11_t12);
+#undef assign_final
+
+#define get_delay(field) (DIV_ROUND_UP(final.field, 10))
+ intel_dp->panel_power_up_delay = get_delay(t1_t3);
+ intel_dp->backlight_on_delay = get_delay(t8);
+ intel_dp->backlight_off_delay = get_delay(t9);
+ intel_dp->panel_power_down_delay = get_delay(t10);
+ intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
+#undef get_delay
+
+ /* And finally store the new values in the power sequencer. */
+ pp_on = (final.t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
+ (final.t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
+ pp_off = (final.t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
+ (final.t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
+ /* Compute the divisor for the pp clock, simply match the Bspec
+ * formula. */
+ pp_div = ((100 * intel_pch_rawclk(dev))/2 - 1)
+ << PP_REFERENCE_DIVIDER_SHIFT;
+ pp_div |= (DIV_ROUND_UP(final.t11_t12, 1000)
+ << PANEL_POWER_CYCLE_DELAY_SHIFT);
+
+ /* Haswell doesn't have any port selection bits for the panel
+ * power sequencer any more. */
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ if (is_cpu_edp(intel_dp))
+ pp_on |= PANEL_POWER_PORT_DP_A;
+ else
+ pp_on |= PANEL_POWER_PORT_DP_D;
+ }
+
+ I915_WRITE(PCH_PP_ON_DELAYS, pp_on);
+ I915_WRITE(PCH_PP_OFF_DELAYS, pp_off);
+ I915_WRITE(PCH_PP_DIVISOR, pp_div);
+
+
+ DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
+ intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
+ intel_dp->panel_power_cycle_delay);
+
+ DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
+ intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+
+ DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
+ I915_READ(PCH_PP_ON_DELAYS),
+ I915_READ(PCH_PP_OFF_DELAYS),
+ I915_READ(PCH_PP_DIVISOR));
}
void
-intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
+intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
+ struct intel_connector *intel_connector)
{
+ struct drm_connector *connector = &intel_connector->base;
+ struct intel_dp *intel_dp = &intel_dig_port->dp;
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_connector *connector;
- struct intel_dp *intel_dp;
- struct intel_encoder *intel_encoder;
- struct intel_connector *intel_connector;
+ struct drm_display_mode *fixed_mode = NULL;
+ enum port port = intel_dig_port->port;
const char *name = NULL;
int type;
- intel_dp = kzalloc(sizeof(struct intel_dp), GFP_KERNEL);
- if (!intel_dp)
- return;
-
- intel_dp->output_reg = output_reg;
- intel_dp->port = port;
/* Preserve the current hw state. */
intel_dp->DP = I915_READ(intel_dp->output_reg);
+ intel_dp->attached_connector = intel_connector;
- intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
- if (!intel_connector) {
- kfree(intel_dp);
- return;
- }
- intel_encoder = &intel_dp->base;
-
- if (HAS_PCH_SPLIT(dev) && output_reg == PCH_DP_D)
+ if (HAS_PCH_SPLIT(dev) && port == PORT_D)
if (intel_dpd_is_edp(dev))
intel_dp->is_pch_edp = true;
- if (output_reg == DP_A || is_pch_edp(intel_dp)) {
+ /*
+ * FIXME : We need to initialize built-in panels before external panels.
+ * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup
+ */
+ if (IS_VALLEYVIEW(dev) && port == PORT_C) {
+ type = DRM_MODE_CONNECTOR_eDP;
+ intel_encoder->type = INTEL_OUTPUT_EDP;
+ } else if (port == PORT_A || is_pch_edp(intel_dp)) {
type = DRM_MODE_CONNECTOR_eDP;
intel_encoder->type = INTEL_OUTPUT_EDP;
} else {
+ /* The intel_encoder->type value may be INTEL_OUTPUT_UNKNOWN for
+ * DDI or INTEL_OUTPUT_DISPLAYPORT for the older gens, so don't
+ * rewrite it.
+ */
type = DRM_MODE_CONNECTOR_DisplayPort;
- intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
}
- connector = &intel_connector->base;
drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
connector->polled = DRM_CONNECTOR_POLL_HPD;
-
- intel_encoder->cloneable = false;
-
- INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
- ironlake_panel_vdd_work);
-
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
-
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
- drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
- DRM_MODE_ENCODER_TMDS);
- drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
+ INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
+ ironlake_panel_vdd_work);
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_sysfs_connector_add(connector);
- intel_encoder->enable = intel_enable_dp;
- intel_encoder->pre_enable = intel_pre_enable_dp;
- intel_encoder->disable = intel_disable_dp;
- intel_encoder->post_disable = intel_post_disable_dp;
- intel_encoder->get_hw_state = intel_dp_get_hw_state;
- intel_connector->get_hw_state = intel_connector_get_hw_state;
+ if (HAS_DDI(dev))
+ intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
+ else
+ intel_connector->get_hw_state = intel_connector_get_hw_state;
+
/* Set up the DDC bus. */
switch (port) {
break;
}
- /* Cache some DPCD data in the eDP case */
- if (is_edp(intel_dp)) {
- struct edp_power_seq cur, vbt;
- u32 pp_on, pp_off, pp_div;
-
- pp_on = I915_READ(PCH_PP_ON_DELAYS);
- pp_off = I915_READ(PCH_PP_OFF_DELAYS);
- pp_div = I915_READ(PCH_PP_DIVISOR);
-
- if (!pp_on || !pp_off || !pp_div) {
- DRM_INFO("bad panel power sequencing delays, disabling panel\n");
- intel_dp_encoder_destroy(&intel_dp->base.base);
- intel_dp_destroy(&intel_connector->base);
- return;
- }
-
- /* Pull timing values out of registers */
- cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
- PANEL_POWER_UP_DELAY_SHIFT;
-
- cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
- PANEL_LIGHT_ON_DELAY_SHIFT;
-
- cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
- PANEL_LIGHT_OFF_DELAY_SHIFT;
-
- cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
- PANEL_POWER_DOWN_DELAY_SHIFT;
-
- cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
- PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
-
- DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
- cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
-
- vbt = dev_priv->edp.pps;
-
- DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
- vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
-
-#define get_delay(field) ((max(cur.field, vbt.field) + 9) / 10)
-
- intel_dp->panel_power_up_delay = get_delay(t1_t3);
- intel_dp->backlight_on_delay = get_delay(t8);
- intel_dp->backlight_off_delay = get_delay(t9);
- intel_dp->panel_power_down_delay = get_delay(t10);
- intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
-
- DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
- intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
- intel_dp->panel_power_cycle_delay);
-
- DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
- intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
- }
+ if (is_edp(intel_dp))
+ intel_dp_init_panel_power_sequencer(dev, intel_dp);
intel_dp_i2c_init(intel_dp, intel_connector, name);
+ /* Cache DPCD and EDID for edp. */
if (is_edp(intel_dp)) {
bool ret;
+ struct drm_display_mode *scan;
struct edid *edid;
ironlake_edp_panel_vdd_on(intel_dp);
} else {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
- intel_dp_encoder_destroy(&intel_dp->base.base);
- intel_dp_destroy(&intel_connector->base);
+ intel_dp_encoder_destroy(&intel_encoder->base);
+ intel_dp_destroy(connector);
return;
}
ironlake_edp_panel_vdd_on(intel_dp);
edid = drm_get_edid(connector, &intel_dp->adapter);
if (edid) {
- drm_mode_connector_update_edid_property(connector,
- edid);
- intel_dp->edid_mode_count =
- drm_add_edid_modes(connector, edid);
- drm_edid_to_eld(connector, edid);
- intel_dp->edid = edid;
+ if (drm_add_edid_modes(connector, edid)) {
+ drm_mode_connector_update_edid_property(connector, edid);
+ drm_edid_to_eld(connector, edid);
+ } else {
+ kfree(edid);
+ edid = ERR_PTR(-EINVAL);
+ }
+ } else {
+ edid = ERR_PTR(-ENOENT);
+ }
+ intel_connector->edid = edid;
+
+ /* prefer fixed mode from EDID if available */
+ list_for_each_entry(scan, &connector->probed_modes, head) {
+ if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
+ fixed_mode = drm_mode_duplicate(dev, scan);
+ break;
+ }
+ }
+
+ /* fallback to VBT if available for eDP */
+ if (!fixed_mode && dev_priv->lfp_lvds_vbt_mode) {
+ fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (fixed_mode)
+ fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
+
ironlake_edp_panel_vdd_off(intel_dp, false);
}
- intel_encoder->hot_plug = intel_dp_hot_plug;
-
if (is_edp(intel_dp)) {
- dev_priv->int_edp_connector = connector;
- intel_panel_setup_backlight(dev);
+ intel_panel_init(&intel_connector->panel, fixed_mode);
+ intel_panel_setup_backlight(connector);
}
intel_dp_add_properties(intel_dp, connector);
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
}
}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
+{
+ struct intel_digital_port *intel_dig_port;
+ struct intel_encoder *intel_encoder;
+ struct drm_encoder *encoder;
+ struct intel_connector *intel_connector;
+
+ intel_dig_port = kzalloc(sizeof(struct intel_digital_port), GFP_KERNEL);
+ if (!intel_dig_port)
+ return;
+
+ intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+ if (!intel_connector) {
+ kfree(intel_dig_port);
+ return;
+ }
+
+ intel_encoder = &intel_dig_port->base;
+ encoder = &intel_encoder->base;
+
+ drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
+
+ intel_encoder->enable = intel_enable_dp;
+ intel_encoder->pre_enable = intel_pre_enable_dp;
+ intel_encoder->disable = intel_disable_dp;
+ intel_encoder->post_disable = intel_post_disable_dp;
+ intel_encoder->get_hw_state = intel_dp_get_hw_state;
+
+ intel_dig_port->port = port;
+ intel_dig_port->dp.output_reg = output_reg;
+
+ intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+ intel_encoder->cloneable = false;
+ intel_encoder->hot_plug = intel_dp_hot_plug;
+
+ intel_dp_init_connector(intel_dig_port, intel_connector);
+}
projects / karo-tx-linux.git / blobdiff