* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
unsigned char params[0];
};
-#define CFG_CMD_EL 0x8000
-#define CFG_CMD_SUSPEND 0x4000
-#define CFG_CMD_INT 0x2000
-#define CFG_CMD_IAS 0x0001 /* individual address setup */
-#define CFG_CMD_CONFIGURE 0x0002 /* configure */
+#define CONFIG_SYS_CMD_EL 0x8000
+#define CONFIG_SYS_CMD_SUSPEND 0x4000
+#define CONFIG_SYS_CMD_INT 0x2000
+#define CONFIG_SYS_CMD_IAS 0x0001 /* individual address setup */
+#define CONFIG_SYS_CMD_CONFIGURE 0x0002 /* configure */
-#define CFG_STATUS_C 0x8000
-#define CFG_STATUS_OK 0x2000
+#define CONFIG_SYS_STATUS_C 0x8000
+#define CONFIG_SYS_STATUS_OK 0x2000
/* Misc.
*/
static void read_hw_addr (struct eth_device *dev, bd_t * bis);
static int eepro100_init (struct eth_device *dev, bd_t * bis);
-static int eepro100_send (struct eth_device *dev, volatile void *packet,
- int length);
+static int eepro100_send(struct eth_device *dev, void *packet, int length);
static int eepro100_recv (struct eth_device *dev);
static void eepro100_halt (struct eth_device *dev);
-#if defined(CONFIG_E500) || defined(CONFIG_DB64360) || defined(CONFIG_DB64460)
+#if defined(CONFIG_E500)
#define bus_to_phys(a) (a)
#define phys_to_bus(a) (a)
#else
/* Check if given phyaddr is valid, i.e. there is a PHY connected.
* Do this by checking model value field from ID2 register.
*/
-static struct eth_device* verify_phyaddr (char *devname, unsigned char addr)
+static struct eth_device* verify_phyaddr (const char *devname,
+ unsigned char addr)
{
struct eth_device *dev;
unsigned short value;
}
/* read id2 register */
- if (get_phyreg(dev, addr, PHY_PHYIDR2, &value) != 0) {
+ if (get_phyreg(dev, addr, MII_PHYSID2, &value) != 0) {
printf("%s: mii read timeout!\n", devname);
return NULL;
}
return dev;
}
-static int eepro100_miiphy_read (char *devname, unsigned char addr,
+static int eepro100_miiphy_read(const char *devname, unsigned char addr,
unsigned char reg, unsigned short *value)
{
struct eth_device *dev;
return 0;
}
-static int eepro100_miiphy_write (char *devname, unsigned char addr,
+static int eepro100_miiphy_write(const char *devname, unsigned char addr,
unsigned char reg, unsigned short value)
{
struct eth_device *dev;
}
dev = (struct eth_device *) malloc (sizeof *dev);
+ if (!dev) {
+ printf("eepro100: Can not allocate memory\n");
+ break;
+ }
+ memset(dev, 0, sizeof(*dev));
sprintf (dev->name, "i82559#%d", card_number);
dev->priv = (void *) devno; /* this have to come before bus_to_phys() */
tx_next = ((tx_next + 1) % NUM_TX_DESC);
cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
- cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE));
+ cfg_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_CONFIGURE));
cfg_cmd->status = 0;
cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
sizeof (i82558_config_cmd));
if (!wait_for_eepro100 (dev)) {
- printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+ printf ("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
goto Done;
}
OUTW (dev, SCB_M | CU_START, SCBCmd);
for (i = 0;
- !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
i++) {
if (i >= TOUT_LOOP) {
printf ("%s: Tx error buffer not ready\n", dev->name);
}
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
printf ("TX error status = 0x%08X\n",
le16_to_cpu (tx_ring[tx_cur].status));
goto Done;
tx_next = ((tx_next + 1) % NUM_TX_DESC);
ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
- ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS));
+ ias_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_IAS));
ias_cmd->status = 0;
ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
OUTW (dev, SCB_M | CU_START, SCBCmd);
- for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
i++) {
if (i >= TOUT_LOOP) {
printf ("%s: Tx error buffer not ready\n",
}
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
printf ("TX error status = 0x%08X\n",
le16_to_cpu (tx_ring[tx_cur].status));
goto Done;
return status;
}
-static int eepro100_send (struct eth_device *dev, volatile void *packet, int length)
+static int eepro100_send(struct eth_device *dev, void *packet, int length)
{
int i, status = -1;
int tx_cur;
OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
OUTW (dev, SCB_M | CU_START, SCBCmd);
- for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
i++) {
if (i >= TOUT_LOOP) {
printf ("%s: Tx error buffer not ready\n", dev->name);
}
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
printf ("TX error status = 0x%08X\n",
le16_to_cpu (tx_ring[tx_cur].status));
goto Done;
/* Pass the packet up to the protocol
* layers.
*/
- NetReceive (rx_ring[rx_next].data, length);
+ net_process_received_packet((u8 *)rx_ring[rx_next].data,
+ length);
} else {
/* There was an error.
*/
static void read_hw_addr (struct eth_device *dev, bd_t * bis)
{
- u16 eeprom[0x40];
u16 sum = 0;
int i, j;
int addr_len = read_eeprom (dev, 0, 6) == 0xffff ? 8 : 6;
for (j = 0, i = 0; i < 0x40; i++) {
u16 value = read_eeprom (dev, i, addr_len);
- eeprom[i] = value;
sum += value;
if (i < 3) {
dev->enetaddr[j++] = value;
projects / karo-tx-uboot.git / blobdiff