#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/firmware.h>
#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
return (rval);
}
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+
int
qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
+ int rval, num, i;
+ uint32_t cnt;
+ uint16_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint16_t *req_ring;
struct qla_fw_info *fw_iter;
rval = QLA_SUCCESS;
*srisc_addr = *ha->brd_info->fw_info->fwstart;
while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
+ risc_size = *fw_iter->fwlen;
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL)
+ risc_addr = *fw_iter->fwstart;
+ else
+ risc_addr = *fw_iter->lfwstart;
num = 0;
rval = 0;
- while (risc_code_size > 0 && !rval) {
+ while (risc_size > 0 && !rval) {
cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
+ if (cnt > risc_size)
+ cnt = risc_size;
DEBUG7(printk("scsi(%ld): Loading risc segment@ "
"addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
+ ha->host_no, risc_code, cnt, risc_addr));
req_ring = (uint16_t *)ha->request_ring;
for (i = 0; i < cnt; i++)
req_ring[i] = cpu_to_le16(risc_code[i]);
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha, ha->request_dma,
- risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
if (rval) {
DEBUG(printk("scsi(%ld): [ERROR] Failed to "
"load segment %d of firmware\n",
}
risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
num++;
}
/* Next firmware sequence */
fw_iter++;
}
+ return rval;
+}
- return (rval);
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval, num, i;
+ uint32_t cnt;
+ uint32_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint32_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *((uint32_t *)fw_iter->lfwstart);
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = (uint32_t *)fw_iter->fwcode;
+ risc_size = *((uint32_t *)fw_iter->fwlen);
+ risc_addr = *((uint32_t *)fw_iter->lfwstart);
+
+ num = 0;
+ rval = 0;
+ while (risc_size > 0 && !rval) {
+ cnt = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (cnt > risc_size)
+ cnt = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_addr));
+
+ req_ring = (uint32_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le32(risc_code[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+ return rval;
}
int
return rval;
}
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
int
-qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int i, fragment;
+ uint16_t *wcode, *fwcode;
+ uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
+ struct fw_blob *blob;
+
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ wcode = (uint16_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint16_t *)blob->fw->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (blob->fw->size < 8 * sizeof(uint16_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ wcode[i] = be16_to_cpu(fwcode[i + 4]);
+ if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
+ wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
+ wcode[2] == 0 && wcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
+ wcode[1], wcode[2], wcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ seg = blob->segs;
+ while (*seg && rval == QLA_SUCCESS) {
+ risc_addr = *seg;
+ *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
+ risc_size = be16_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint16_t);
+ if (blob->fw->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ wlen = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (wlen > risc_size)
+ wlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of words 0x%x.\n", ha->host_no,
+ risc_addr, wlen));
+
+ for (i = 0; i < wlen; i++)
+ wcode[i] = swab16(fwcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ wlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += wlen;
+ risc_addr += wlen;
+ risc_size -= wlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ seg++;
+ }
+ return rval;
+
+fail_fw_integrity:
+ return QLA_FUNCTION_FAILED;
+}
+
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
int rval;
int segments, fragment;
uint32_t risc_addr;
uint32_t risc_size;
uint32_t i;
- const struct firmware *fw_entry;
+ struct fw_blob *blob;
uint32_t *fwcode, fwclen;
- if (request_firmware(&fw_entry, ha->brd_info->fw_fname,
- &ha->pdev->dev)) {
- qla_printk(KERN_ERR, ha,
- "Firmware image file not available: '%s'\n",
- ha->brd_info->fw_fname);
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
return QLA_FUNCTION_FAILED;
}
segments = FA_RISC_CODE_SEGMENTS;
dcode = (uint32_t *)ha->request_ring;
*srisc_addr = 0;
- fwcode = (uint32_t *)fw_entry->data;
+ fwcode = (uint32_t *)blob->fw->data;
fwclen = 0;
/* Validate firmware image by checking version. */
- if (fw_entry->size < 8 * sizeof(uint32_t)) {
+ if (blob->fw->size < 8 * sizeof(uint32_t)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image "
- "(%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
goto fail_fw_integrity;
}
for (i = 0; i < 4; i++)
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image!\n");
+ "Unable to verify integrity of firmware image!\n");
qla_printk(KERN_WARNING, ha,
"Firmware data: %08x %08x %08x %08x!\n", dcode[0],
dcode[1], dcode[2], dcode[3]);
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint32_t);
- if (fw_entry->size < fwclen) {
+ if (blob->fw->size < fwclen) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware "
- "image (%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+
goto fail_fw_integrity;
}
/* Next segment. */
segments--;
}
-
- release_firmware(fw_entry);
return rval;
fail_fw_integrity:
-
- release_firmware(fw_entry);
return QLA_FUNCTION_FAILED;
-
}
+#endif
projects / karo-tx-linux.git / blobdiff