da850evm: basic MII EMAC support

[karo-tx-uboot.git] / include / configs / MPC8315ERDB.h

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index cfed4ca9f88564b30f8eea2ba4b2bb912be0463b..abc29c04fef7b3d1b753eacf60aec5101d099471 100644 (file)
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
  *
  * Dave Liu <daveliu@freescale.com>
  *
@@ -197,6 +197,7 @@
 #define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
 #define CONFIG_SYS_LCRR_CLKDIV         LCRR_CLKDIV_2
 #define CONFIG_SYS_LBC_LBCR            0x00040000
+#define CONFIG_FSL_ELBC                1
 
 /*
  * FLASH on the Local Bus
@@ -242,6 +243,13 @@
 #define CONFIG_SYS_NAND_BASE           0xE0600000
 #endif
 
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITION
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT                 "nand0=e0600000.flash"
+#define MTDPARTS_DEFAULT               \
+       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_CMD_NAND                        1
@@ -297,7 +305,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -504,6 +511,7 @@
 #endif
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
@@ -527,16 +535,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          (HID0_ENABLE_MACHINE_CHECK | \
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE | \
                                 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 #define CONFIG_SYS_HID2                HID2_HBE
 
@@ -616,9 +625,7 @@
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR         04:00:00:00:00:0A
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR                04:00:00:00:00:0B
 #endif
 
 #define CONFIG_BAUDRATE 115200