Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

[karo-tx-uboot.git] / include / configs / P1_P2_RDB.h

diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 7e901e17cc9c58bd0b5bb8d5356555578df0813c..b99f383ec1e58681986b6a9cc9171ded16281f9f 100644 (file)
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -30,33 +30,37 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_MK_P1011RDB
+#ifdef CONFIG_P1011RDB
 #define CONFIG_P1011
 #endif
-#ifdef CONFIG_MK_P1020RDB
+#ifdef CONFIG_P1020RDB
 #define CONFIG_P1020
 #endif
-#ifdef CONFIG_MK_P2010RDB
+#ifdef CONFIG_P2010RDB
 #define CONFIG_P2010
 #endif
-#ifdef CONFIG_MK_P2020RDB
+#ifdef CONFIG_P2020RDB
 #define CONFIG_P2020
 #endif
 
-#ifdef CONFIG_MK_NAND
+#ifdef CONFIG_NAND
 #define CONFIG_NAND_U_BOOT             1
 #define CONFIG_RAMBOOT_NAND            1
-#define CONFIG_RAMBOOT_TEXT_BASE       0xf8f82000
+#define CONFIG_SYS_TEXT_BASE           0xf8f82000
 #endif
 
-#ifdef CONFIG_MK_SDCARD
+#ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD          1
-#define CONFIG_RAMBOOT_TEXT_BASE       0xf8f80000
+#define CONFIG_SYS_TEXT_BASE           0xf8f80000
 #endif
 
-#ifdef CONFIG_MK_SPIFLASH
+#ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH                1
-#define CONFIG_RAMBOOT_TEXT_BASE       0xf8f80000
+#define CONFIG_SYS_TEXT_BASE           0xf8f80000
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE           0xeff80000
 #endif
 
 /* High Level Configuration Options */
@@ -188,7 +192,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
        || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
@@ -207,11 +211,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR      0xffd00000       /* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_END        0x00004000      /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x00004000      /* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END \
-                                               - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE \
+                                               - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon*/
@@ -281,7 +284,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -539,14 +541,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)/* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -580,11 +574,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
        "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
        "loadaddr=1000000\0"                    \
        "tftpflash=tftpboot $loadaddr $uboot; "                 \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
        "consoledev=ttyS0\0"                            \
        "ramdiskaddr=2000000\0"                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"            \