imx: imx6_spl add mx6ul support

[karo-tx-uboot.git] / include / configs / am3517_crane.h

diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 4407b454dd133ba8e5d6892d1954f2238a0290d1..6a0240b903874890b5761cbd8d971d476928fb33 100644 (file)
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -17,14 +17,18 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3_AM3517CRANE       1       /* working with CRANEBOARD */
 #define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -124,8 +128,6 @@
 #endif /* CONFIG_USB_AM35X */
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
@@ -136,10 +138,6 @@
 #define CONFIG_CMD_DHCP
 #undef CONFIG_CMD_PING
 
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -147,8 +145,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
 #define CONFIG_SYS_I2C_OMAP34XX
 
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -252,17 +248,12 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors */
                                                /* on one chip */
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
@@ -298,21 +289,19 @@
                                         GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
@@ -329,6 +318,7 @@
 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048