#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
* Timer clock frequency. We're using the CPU-internal COUNT register
* for this, so this is equivalent to the CPU core clock frequency
*/
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
/*
- * Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
- * frequency and the peripherals to run at 1/4 the PLL frequency.
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
*/
#define CONFIG_PLL 1
-#define CFG_POWER_MANAGER 1
-#define CFG_OSC0_HZ 20000000
-#define CFG_PLL0_DIV 1
-#define CFG_PLL0_MUL 7
-#define CFG_PLL0_SUPPRESS_CYCLES 16
-#define CFG_CLKDIV_CPU 0
-#define CFG_CLKDIV_HSB 1
-#define CFG_CLKDIV_PBA 2
-#define CFG_CLKDIV_PBB 1
+#define CONFIG_SYS_POWER_MANAGER 1
+#define CONFIG_SYS_OSC0_HZ 20000000
+#define CONFIG_SYS_PLL0_DIV 1
+#define CONFIG_SYS_PLL0_MUL 7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
+ */
+#define CONFIG_SYS_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
+ */
+#define CONFIG_SYS_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
+ */
+#define CONFIG_SYS_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
+ */
+#define CONFIG_SYS_CLKDIV_PBB 1
+
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
/*
* The PLLOPT register controls the PLL like this:
*
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
*/
-#define CFG_PLL0_OPT 0x04
+#define CONFIG_SYS_PLL0_OPT 0x04
#undef CONFIG_USART0
#define CONFIG_USART1 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS \
- "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
+ "console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
#define CONFIG_BOOTCOMMAND \
"fsload; bootm $(fileaddr)"
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
* data on the serial line may interrupt the boot sequence.
*/
-#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTDELAY 1
#define CONFIG_AUTOBOOT 1
#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
/*
- * These are "locally administered ethernet addresses" generated by
- * ./tools/gen_eth_addr
- *
- * After booting the board for the first time, new addresses should be
- * generated and assigned to the environment variables "ethaddr" and
- * "eth1addr".
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
*/
-#define CONFIG_ETHADDR "6a:87:71:14:cd:cb"
-#define CONFIG_ETH1ADDR "ca:f8:15:e6:3e:e6"
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#define CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
-#define CONFIG_PIO2 1
-#define CFG_NR_PIOS 5
-#define CFG_HSDRAMC 1
+#define CONFIG_PORTMUX_PIO 1
+#define CONFIG_SYS_NR_PIOS 5
+#define CONFIG_SYS_HSDRAMC 1
#define CONFIG_MMC 1
+#define CONFIG_ATMEL_MCI 1
-#define CFG_DCACHE_LINESZ 32
-#define CFG_ICACHE_LINESZ 32
+#define CONFIG_SYS_DCACHE_LINESZ 32
+#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
/* External flash on STK1000 */
#if 0
-#define CFG_FLASH_CFI 1
-#define CFG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
#endif
-#define CFG_FLASH_BASE 0x00000000
-#define CFG_FLASH_SIZE 0x800000
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 135
-
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_FLASH_SIZE 0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 135
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CFG_SDRAM_BASE 0x10000000
+#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 65536
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE 65536
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-#define CFG_MALLOC_LEN (256*1024)
-#define CFG_DMA_ALLOC_LEN (16384)
+#define CONFIG_SYS_MALLOC_LEN (256*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
-/* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
-#define CFG_BOOTPARAMS_LEN (16 * 1024)
+/* Allow 4MB for the kernel run-time image */
+#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
-#define CFG_CBSIZE 256
-#define CFG_MAXARGS 8
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP 1
-
-#define CFG_MEMTEST_START \
- ({ gd->bd->bi_dram[0].start; })
-#define CFG_MEMTEST_END \
- ({ \
- gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \
- })
-#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+
+#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / blobdiff