karo: tx48: move 'dtb' partition just before 'bbt'

[karo-tx-uboot.git] / include / configs / incaip.h

diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index a18ba801925fa4f0ec8395d9e89a5914485b1cf1..0ff9a7ff82b22c3994ae49eb197bd515522d274f 100644 (file)
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -31,20 +15,22 @@
 #define CONFIG_MIPS32          1       /* MIPS 4Kc CPU core    */
 #define CONFIG_INCA_IP         1       /* on a INCA-IP Board   */
 
-#ifndef        CPU_CLOCK_RATE
-/* allowed values: 100000000, 133000000, and 150000000 */
-#define CPU_CLOCK_RATE 150000000       /* default: 150 MHz clock for the MIPS core */
+#define CONFIG_XWAY_SWAP_BYTES
+
+/*
+ * Clock for the MIPS core (MHz)
+ * allowed values: 100000000, 133000000, and 150000000 (default)
+ */
+#ifndef CONFIG_CPU_CLOCK_RATE
+#define CONFIG_CPU_CLOCK_RATE  150000000
 #endif
 
-#define INFINEON_EBU_BOOTCFG   0x40C4  /* CMULT = 8 */
+#define CONFIG_SYS_XWAY_EBU_BOOTCFG    0x40C4  /* CMULT = 8 */
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
 #define CONFIG_BAUDRATE                115200
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 #define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
 
 #define CONFIG_PREBOOT "echo;" \
@@ -139,7 +125,7 @@
 #define PHYS_FLASH_2           0xb0800000 /* Flash Bank #2 */
 
 /* The following #defines are needed to get flash environment right */
-#define        CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define        CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 #define        CONFIG_SYS_MONITOR_LEN          (192 << 10)
 
 #define CONFIG_SYS_INIT_SP_OFFSET      0x400000
@@ -161,21 +147,20 @@
 #define CONFIG_NR_DRAM_BANKS   1
 
 #define CONFIG_INCA_IP_SWITCH
-#define CONFIG_NET_MULTI
 #define CONFIG_INCA_IP_SWITCH_AMDIX
 
 /*
  * JFFS2 partitions
  */
 /* No command line, one static partition, use all space on the device */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV               "nor1"
 #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET       0x00000000
 
 /* mtdparts command line support */
 /*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT         "nor0=INCA-IP Bank 0"
 #define MTDPARTS_DEFAULT       "mtdparts=INCA-IP Bank 0:192k(uboot)," \
                                                        "64k(env)," \