Adding fixed sdram setting for cornet_ds board

[karo-tx-uboot.git] / include / configs / ml507.h

diff --git a/include/configs/ml507.h b/include/configs/ml507.h
index f8cd499985bdaca014f49600d62834bf35583a58..a7319e42739758a58cf568e6706d771f43fc8935 100644 (file)
--- a/include/configs/ml507.h
+++ b/include/configs/ml507.h
@@ -17,106 +17,33 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_ML507    1
-#define CONFIG_XILINX_440      1
+
+/*CPU*/
 #define CONFIG_440             1
-#define CONFIG_4xx             1
+#define CONFIG_XILINX_ML507    1
 #include "../board/xilinx/ml507/xparameters.h"
 
 /*Mem Map*/
-#define CFG_SDRAM_BASE         0x0
-#define CFG_SDRAM_SIZE_MB      256
-#define CFG_MONITOR_BASE       TEXT_BASE
-#define CFG_MONITOR_LEN                ( 192 * 1024 )
-#define CFG_MALLOC_LEN         ( CFG_ENV_SIZE + 128 * 1024 )
-
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE                XPAR_UARTLITE_0_BAUDRATE
-#define CFG_BAUDRATE_TABLE     { XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE     XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
+#define CONFIG_SYS_SDRAM_SIZE_MB       256
 
 /*Env*/
-#define        CFG_ENV_IS_IN_FLASH
-#define        CFG_ENV_SIZE            0x20000
-#define        CFG_ENV_SECT_SIZE       0x20000
-#define CFG_ENV_OFFSET                 0x340000
-#define CFG_ENV_ADDR           (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+#define        CONFIG_ENV_IS_IN_FLASH  1
+#define        CONFIG_ENV_SIZE         0x20000
+#define        CONFIG_ENV_SECT_SIZE    0x20000
+#define CONFIG_ENV_OFFSET      0x340000
+#define CONFIG_ENV_ADDR                (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET)
 
 /*Misc*/
-#define CONFIG_BOOTDELAY       5               /* autoboot after 5 seconds     */
-#define CFG_LONGHELP                           /* undef to save memory         */
-#define CFG_PROMPT             "board:/# "     /* Monitor Command Prompt       */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE             1024            /* Console I/O Buffer Size      */
-#else
-#define CFG_CBSIZE             256             /* Console I/O Buffer Size      */
-#endif
-#define CFG_PBSIZE             ( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
-#define CFG_MAXARGS            16              /* max number of command args   */
-#define CFG_BARGSIZE           CFG_CBSIZE      /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START      0x00400000      /* memtest works on           */
-#define CFG_MEMTEST_END                0x00C00000      /* 4 ... 12 MB in DRAM        */
-#define CFG_LOAD_ADDR          0x00400000      /* default load address       */
-#define CFG_EXTBDINFO          1               /* Extended board_into (bd_t) */
-#define CFG_HZ                 1000            /* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING                 /* add command line history     */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support   */
-#define CONFIG_LOOPW                           /* enable loopw command         */
-#define CONFIG_MX_CYCLIC                       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK            /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE                        /* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET                 /* don't print console @ startup */
-#define CFG_HUSH_PARSER                                /* Use the HUSH parser          */
-#define        CFG_PROMPT_HUSH_PS2     "> "
-#define CONFIG_LOADS_ECHO                      /* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE                  /* allow baudrate change        */
-#define CFG_BOOTMAPSZ          ( 8 << 20 )     /* Initial Memory map for Linux */
+#define CONFIG_SYS_PROMPT      "ml507:/# "     /* Monitor Command Prompt    */
 #define CONFIG_PREBOOT         "echo U-Boot is up and runnining;"
 
-/*Stack*/
-#define CFG_INIT_RAM_ADDR      0x800000        /* Initial RAM address    */
-#define CFG_INIT_RAM_END       0x2000          /* End of used area in RAM  */
-#define CFG_GBL_DATA_SIZE      128             /* num bytes initial data   */
-#define CFG_GBL_DATA_OFFSET    ( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
-#define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ    XPAR_CORE_CLOCK_FREQ_HZ
-
 /*Flash*/
-#define        CFG_FLASH_BASE          XPAR_FLASH_MEM0_BASEADDR
-#define        CFG_FLASH_SIZE          (32*1024*1024)
-#define        CFG_FLASH_CFI           1
-#define        CONFIG_FLASH_CFI_DRIVER 1
-#define        CFG_FLASH_EMPTY_INFO    1
-#define        CFG_MAX_FLASH_BANKS     1
-#define        CFG_MAX_FLASH_SECT      259
-#define        CFG_FLASH_PROTECTION
+#define        CONFIG_SYS_FLASH_SIZE   (32*1024*1024)
+#define        CONFIG_SYS_MAX_FLASH_SECT       259
 #define MTDIDS_DEFAULT         "nor0=ml507-flash"
 #define MTDPARTS_DEFAULT       "mtdparts=ml507-flash:-(user)"
 
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
 
 #endif                                         /* __CONFIG_H */