karo: tx6: add TXUL support

[karo-tx-uboot.git] / include / configs / mx6sabre_common.h

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index dafbdf784f3ab887986016f2307d5cf35589e40a..c8ba041daada58fb86fc1b1b0b927df513eae647 100644 (file)
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -21,30 +21,12 @@
 
 #define CONFIG_MXC_UART
 
-#define CONFIG_CMD_FUSE
-#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -57,7 +39,6 @@
 
 #define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS          0
@@ -68,8 +49,6 @@
 
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_SETEXPR
 
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 #define EMMC_ENV \
@@ -91,18 +70,12 @@
 #define EMMC_ENV ""
 #endif
 
-#ifndef VIDEO_ARGS
-#define VIDEO_ARGS ""
-#endif
-
-#ifndef VIDEO_ARGS_SCRIPT
-#define VIDEO_ARGS_SCRIPT ""
-#endif
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
-       "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+       "fdt_file=undefined\0" \
        "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
@@ -187,9 +160,26 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+               "findfdt="\
+                       "if test $fdt_file = undefined; then " \
+                               "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
+                                       "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
+                               "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
+                                       "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
+                               "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
+                                       "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+                               "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
+                                       "setenv fdt_file imx6q-sabresd.dtb; fi; " \
+                               "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
+                                       "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
+                               "if test $fdt_file = undefined; then " \
+                                       "echo WARNING: Could not determine dtb to use; fi; " \
+                       "fi;\0" \
+
 
 #define CONFIG_BOOTCOMMAND \
+       "run findfdt;" \
        "mmc dev ${mmcdev};" \
        "if mmc rescan; then " \
                "if run loadbootscript; then " \
@@ -232,12 +222,6 @@
 #define CONFIG_ENV_OFFSET              (8 * 64 * 1024)
 #endif
 
-#define CONFIG_OF_LIBFDT
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /* Framebuffer */
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
@@ -262,8 +246,8 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_VBUS_DRAW    2
 
 #define CONFIG_G_DNL_VENDOR_NUM                0x0525