armv8/ls2085aqds: Add USB support for ls2085aqds

[karo-tx-uboot.git] / include / configs / socfpga_cyclone5.h

diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 34d9cf61346dfe23e0dcc594dad484c5d7ee095c..87397bc13e8453624518784ce5a39a63808c3417 100644 (file)
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -3,8 +3,6 @@
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
-#ifndef __CONFIG_SOCFPGA_CYCLONE5_H__
-#define __CONFIG_SOCFPGA_CYCLONE5_H__
 
 #include <asm/arch/socfpga_base_addrs.h>
 #include "../../board/altera/socfpga/pinmux_config.h"
@@ -13,7 +11,6 @@
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
@@ -21,19 +18,19 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DFU
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_USB_MASS_STORAGE
 
-#define CONFIG_REGEX                   /* Enable regular expression support */
 
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE              0x40000000      /* 1GiB on SoCDK */
@@ -41,8 +38,7 @@
 /* Booting Linux */
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTFILE                "zImage"
-#define CONFIG_BOOTARGS                "console=ttyS0" __stringify(CONFIG_BAUDRATE)
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define CONFIG_BOOTARGS                "console=ttyS0," __stringify(CONFIG_BAUDRATE)
 #define CONFIG_BOOTCOMMAND     "run ramboot"
 #else
 #define CONFIG_BOOTCOMMAND     "run mmcload; run mmcboot"
@@ -52,12 +48,10 @@
 
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_EMAC_BASE               SOCFPGA_EMAC0_ADDRESS
+#define CONFIG_EMAC_BASE               SOCFPGA_EMAC1_ADDRESS
 #define CONFIG_PHY_INTERFACE_MODE      PHY_INTERFACE_MODE_RGMII
-#define CONFIG_EPHY0_PHY_ADDR          0
 
 /* PHY */
-#define CONFIG_EPHY1_PHY_ADDR          4
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
 #define CONFIG_KSZ9021_CLK_SKEW_ENV    "micrel-ksz9021-clk-skew"
@@ -67,6 +61,12 @@
 
 #endif
 
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2_REG_ADDR       SOCFPGA_USB1_ADDRESS
+#endif
+#define CONFIG_G_DNL_MANUFACTURER      "Altera"
+
 /* Extra Environment */
 #define CONFIG_HOSTNAME                socfpga_cyclone5
 
@@ -85,8 +85,8 @@
                " root=${mmcroot} rw rootwait;" \
                "bootz ${loadaddr} - ${fdt_addr}\0" \
        "mmcload=mmc rescan;" \
-               "fatload mmc 0:1 ${loadaddr} ${bootimage};" \
-               "fatload mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+               "load mmc 0:1 ${loadaddr} ${bootimage};" \
+               "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
        "qspiroot=/dev/mtdblock0\0" \
        "qspirootfstype=jffs2\0" \
        "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
@@ -96,4 +96,3 @@
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
-#endif /* __CONFIG_SOCFPGA_CYCLONE5_H__ */