* Make Ethernet autonegotiation on INCA-IP work for all clock rates;

[karo-tx-uboot.git] / include / status_led.h

diff --git a/include/status_led.h b/include/status_led.h
index 369cce2f62c93852c6ccbc13dda4a09e53dbc8bd..47f7c355afe6f5014951bd990b3e18537e680882 100644 (file)
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -97,20 +97,20 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_DAT                        im_ioport.iop_padat
 
 # define STATUS_LED_BIT                        0x0800  /* Red LED 0 is on PA.4 */
-# define STATUS_LED_PERIOD             (CFG_HZ / 2)
-# define STATUS_LED_STATE              STATUS_LED_BLINKING
+# define STATUS_LED_PERIOD             (CFG_HZ / 4)
+# define STATUS_LED_STATE              STATUS_LED_OFF
 # define STATUS_LED_BIT1               0x0400  /* Grn LED 1 is on PA.5 */
-# define STATUS_LED_PERIOD1            (CFG_HZ / 2)
+# define STATUS_LED_PERIOD1            (CFG_HZ / 8)
 # define STATUS_LED_STATE1             STATUS_LED_BLINKING
 # define STATUS_LED_BIT2               0x0080  /* Red LED 2 is on PA.8 */
-# define STATUS_LED_PERIOD2            (CFG_HZ / 2)
-# define STATUS_LED_STATE2             STATUS_LED_BLINKING
+# define STATUS_LED_PERIOD2            (CFG_HZ / 4)
+# define STATUS_LED_STATE2             STATUS_LED_OFF
 # define STATUS_LED_BIT3               0x0040  /* Grn LED 3 is on PA.9 */
-# define STATUS_LED_PERIOD3            (CFG_HZ / 2)
-# define STATUS_LED_STATE3             STATUS_LED_BLINKING
+# define STATUS_LED_PERIOD3            (CFG_HZ / 4)
+# define STATUS_LED_STATE3             STATUS_LED_OFF
 
 # define STATUS_LED_ACTIVE             1       /* LED on for bit == 1  */
-# define STATUS_LED_BOOT               0       /* Boot status on LED 1 */
+# define STATUS_LED_BOOT               1       /* Boot status on LED 1 */
 
 /*****  IVMS8  **********************************************************/
 #elif defined(CONFIG_IVMS8)
@@ -236,6 +236,8 @@ void status_led_set  (int led, int state);
 /*****  NetVia   ********************************************************/
 #elif defined(CONFIG_NETVIA)
 
+#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
+
 #define STATUS_LED_PAR         im_ioport.iop_pdpar
 #define STATUS_LED_DIR         im_ioport.iop_pddir
 #undef  STATUS_LED_ODR
@@ -252,6 +254,20 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE     0               /* LED on for bit == 0  */
 # define STATUS_LED_BOOT       0               /* LED 0 used for boot status */
 
+#endif
+
+/*****  CMI   ********************************************************/
+#elif defined(CONFIG_CMI)
+# define STATUS_LED_DIR                im_mios.mios_mpiosm32ddr
+# define STATUS_LED_DAT                im_mios.mios_mpiosm32dr
+
+# define STATUS_LED_BIT                0x2000          /* Select one of the 16 possible*/
+                                               /* MIOS outputs */
+# define STATUS_LED_PERIOD     (CFG_HZ / 2)    /* Blinking periode is 500 ms */
+# define STATUS_LED_STATE      STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE     1               /* LED on for bit == 0  */
+# define STATUS_LED_BOOT       0               /* LED 0 used for boot status */
 
 /*****  KUP4K  ********************************************************/
 #elif defined(CONFIG_KUP4K)
@@ -269,12 +285,49 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT       0               /* LED 0 used for boot status */
 
+#elif defined(CONFIG_SVM_SC8xx)
+# define STATUS_LED_PAR         im_cpm.cp_pbpar
+# define STATUS_LED_DIR         im_cpm.cp_pbdir
+# define STATUS_LED_ODR         im_cpm.cp_pbodr
+# define STATUS_LED_DAT         im_cpm.cp_pbdat
+
+# define STATUS_LED_BIT         0x00000001
+# define STATUS_LED_PERIOD      (CFG_HZ / 2)
+# define STATUS_LED_STATE       STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */
+
+# define STATUS_LED_BOOT        0               /* LED 0 used for boot status */
+
+/*****  RBC823    ********************************************************/
+#elif defined(CONFIG_RBC823)
+
+# define STATUS_LED_PAR         im_ioport.iop_pcpar
+# define STATUS_LED_DIR         im_ioport.iop_pcdir
+#  undef STATUS_LED_ODR
+# define STATUS_LED_DAT         im_ioport.iop_pcdat
+
+# define STATUS_LED_BIT         0x0002          /* LED 0 is on PC.14 */
+# define STATUS_LED_PERIOD      (CFG_HZ / 2)
+# define STATUS_LED_STATE       STATUS_LED_BLINKING
+# define STATUS_LED_BIT1        0x0004          /* LED 1 is on PC.13 */
+# define STATUS_LED_PERIOD1     (CFG_HZ)
+# define STATUS_LED_STATE1      STATUS_LED_OFF
+
+# define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */
+
+# define STATUS_LED_BOOT        0               /* LED 0 used for boot status */
+
 /************************************************************************/
 #else
 # error Status LED configuration missing
 #endif
 /************************************************************************/
 
+#ifndef CONFIG_BOARD_SPECIFIC_LED
+# include <asm/status_led.h>
+#endif
+
 #endif /* CONFIG_STATUS_LED    */
 
 #endif /* _STATUS_LED_H_       */