#include <command.h>
#include <devices.h>
#include <environment.h>
-#include <i2c.h>
#include <malloc.h>
#include <net.h>
+#include <timestamp.h>
+#include <status_led.h>
#include <version.h>
#include <asm/cplb.h>
DECLARE_GLOBAL_DATA_PTR;
-const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")";
+const char version_string[] = U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME")";
__attribute__((always_inline))
static inline void serial_early_puts(const char *s)
static void mem_malloc_init(void)
{
- mem_malloc_start = (void *)CFG_MALLOC_BASE;
- mem_malloc_end = (void *)(CFG_MALLOC_BASE + CFG_MALLOC_LEN);
+ mem_malloc_start = (void *)CONFIG_SYS_MALLOC_BASE;
+ mem_malloc_end = (void *)(CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
mem_malloc_brk = mem_malloc_start;
memset(mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
}
dcplb_add(0xFF800000, L1_DMEMORY);
++i;
- icplb_add(CFG_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL);
- dcplb_add(CFG_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL);
+ icplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL);
+ dcplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL);
++i;
/* If the monitor crosses a 4 meg boundary, we'll need
* to lock two entries for it.
*/
- if ((CFG_MONITOR_BASE & CPLB_PAGE_MASK) != ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK)) {
- icplb_add((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL);
- dcplb_add((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL);
+ if ((CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK) != ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK)) {
+ icplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL);
+ dcplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL);
++i;
}
++i;
#endif
- while (i < 16 && extern_memory < (CFG_MONITOR_BASE & CPLB_PAGE_MASK)) {
+ while (i < 16 && extern_memory < (CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK)) {
icplb_add(extern_memory, SDRAM_IGENERIC);
dcplb_add(extern_memory, SDRAM_DGENERIC);
extern_memory += CPLB_PAGE_SIZE;
extern int exception_init(void);
extern int irq_init(void);
-extern int rtc_init(void);
extern int timer_init(void);
void board_init_f(ulong bootflag)
{
ulong addr;
bd_t *bd;
+ char buf[32];
#ifdef CONFIG_BOARD_EARLY_INIT_F
serial_early_puts("Board early init flash\n");
dcache_enable();
#endif
+#ifdef DEBUG
+ if (CONFIG_SYS_GBL_DATA_SIZE < sizeof(*gd))
+ hang();
+#endif
serial_early_puts("Init global data\n");
- gd = (gd_t *) (CFG_GBL_DATA_ADDR);
- memset((void *)gd, 0, sizeof(gd_t));
+ gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR);
+ memset((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
/* Board data initialization */
- addr = (CFG_GBL_DATA_ADDR + sizeof(gd_t));
+ addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t));
/* Align to 4 byte boundary */
addr &= ~(4 - 1);
display_banner();
checkboard();
-#if defined(CONFIG_RTC_BFIN) && defined(CONFIG_CMD_DATE)
- rtc_init();
-#endif
timer_init();
- printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n",
- get_vco() / 1000000, get_cclk() / 1000000, get_sclk() / 1000000);
+ printf("Clock: VCO: %s MHz, ", strmhz(buf, get_vco()));
+ printf("Core: %s MHz, ", strmhz(buf, get_cclk()));
+ printf("System: %s MHz\n", strmhz(buf, get_sclk()));
printf("RAM: ");
print_size(initdram(0), "\n");
board_init_r((gd_t *) gd, 0x20000010);
}
-#if defined(CONFIG_SOFT_I2C) || defined(CONFIG_HARD_I2C)
-static int init_func_i2c(void)
-{
- puts("I2C: ");
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- puts("ready\n");
- return (0);
-}
-#endif
-
void board_init_r(gd_t * id, ulong dest_addr)
{
extern void malloc_bin_reloc(void);
post_reloc();
#endif
-#if !defined(CFG_NO_FLASH)
- /* There are some other pointer constants we must deal with */
- /* configure available FLASH banks */
+#if !defined(CONFIG_SYS_NO_FLASH)
+ /* Initialize the flash and protect u-boot by default */
extern flash_info_t flash_info[];
ulong size = flash_init();
puts("Flash: ");
print_size(size, "\n");
- flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE,
- CFG_FLASH_BASE + 0x1ffff, &flash_info[0]);
- bd->bi_flashstart = CFG_FLASH_BASE;
+ flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - 1,
+ &flash_info[0]);
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
bd->bi_flashsize = size;
bd->bi_flashoffset = 0;
#else
mem_malloc_init();
malloc_bin_reloc();
-#ifdef CONFIG_SPI
-# if ! defined(CFG_ENV_IS_IN_EEPROM)
- spi_init_f();
-# endif
- spi_init_r();
+#ifdef CONFIG_CMD_NAND
+ puts("NAND: ");
+ nand_init(); /* go init the NAND */
#endif
/* relocate environment function pointers etc. */
/* Initialize the console (after the relocation and devices init) */
console_init_r();
+#ifdef CONFIG_STATUS_LED
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+ status_led_set(STATUS_LED_CRASH, STATUS_LED_OFF);
+#endif
+
/* Initialize from environment */
if ((s = getenv("loadaddr")) != NULL)
load_addr = simple_strtoul(s, NULL, 16);
copy_filename(BootFile, s, sizeof(BootFile));
#endif
-#ifdef CONFIG_CMD_NAND
- puts("NAND: ");
- nand_init(); /* go init the NAND */
-#endif
-
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r();
bd->bi_enetaddr[3], bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
#endif
-#if defined(CONFIG_SOFT_I2C) || defined(CONFIG_HARD_I2C)
- init_func_i2c();
-#endif
-
display_global_data();
#if defined(CONFIG_POST)
void hang(void)
{
+#ifdef CONFIG_STATUS_LED
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+ status_led_set(STATUS_LED_CRASH, STATUS_LED_BLINKING);
+#endif
puts("### ERROR ### Please RESET the board ###\n");
while (1)
/* If a JTAG emulator is hooked up, we'll automatically trigger
projects / karo-tx-uboot.git / blobdiff