X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=CHANGELOG;h=0068947f754d0dfd33ecfc31450629311f20c144;hb=429c180edad038f91c989cb14b478228092e7054;hp=82b3145357d22362cb473f77ac3ff1b2ba557a58;hpb=b90296fc39a33f84bb2b0aa79bf997be495ba791;p=karo-tx-uboot.git diff --git a/CHANGELOG b/CHANGELOG index 82b3145357..0068947f75 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,1013 @@ +commit e881cb563e32f45832b7b6db77bdcd017adcbb41 +Author: Bruce Adler +Date: Fri Nov 2 13:15:42 2007 -0700 + + fix wording in README + + Changed the wording to properly describe the shadowing + of the environment from ROM to RAM + + Signed-off-by: Bruce Adler + +commit ad845beef06245426c57b53dcdc01b7dc70e0d45 +Author: Shinya Kuribayashi +Date: Wed Oct 31 02:18:15 2007 +0900 + + blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk + + Signed-off-by: Shinya Kuribayashi + +commit ec22755799466c8a103664bb3a5e647bf9c238f4 +Author: Vlad Lungu +Date: Thu Oct 25 16:08:14 2007 +0300 + + Trimmed some variables in ne2000.c + + Signed-off-by: Vlad Lungu + +commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 +Author: Zhang Wei +Date: Thu Oct 25 17:51:27 2007 +0800 + + Fix the issue of usb_kbd driver missing the scan code of key 'z'. + + The scan code of the key 'z' is 0x1d, which should be handled. + + The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI + controller. + + Signed-off-by: Zhang Wei + +commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 +Author: Zhang Wei +Date: Thu Oct 25 17:30:04 2007 +0800 + + Fix USB support issue for MPC8641HPCN board. + + The configuration file has already enabled USB, but it + missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB + on MPC8641HPCN can not work because of the wrong USB + register endian. + + And add the USB command to U-Boot commands list. + + Signed-off-by: Zhang Wei + +commit 4e62041023dc3de9d98d977bb080235bc6d035e0 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Oct 24 18:16:01 2007 +0200 + + Use config_cmd_default.h instead of config_cmd_all.h + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 56622f87857439b1c221e9deef11a9d5bb5d4308 +Author: Marian Balakowicz +Date: Wed Oct 24 01:37:36 2007 +0200 + + TQM5200: Call usb_cpu_init() during board init + + usb_cpu_init() configures GPS USB pins, clocks, etc. and + is required for proper operation of kernel USB subsystem. + This setup was previously done in the kernel by the fixup + code which is being removed, thus low level init must be + done by U-boot now. + + Signed-off-by: Marian Balakowicz + +commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd +Author: Guennadi Liakhovetski +Date: Tue Oct 23 16:25:50 2007 +0200 + + Fix typo in nfs.c + + An obvious typo. Originally fixed in linkstation u-boot port. + + Signed-off-by: Guennadi Liakhovetski + +commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 +Author: Guennadi Liakhovetski +Date: Tue Oct 23 14:35:05 2007 +0200 + + Fix a typo in cpu/mpc824x/interrupts.c + + Since December 2003 the timer_interrupt_cpu() function in + cpu/mpc824x/interrupts.c contains what seems to be a superfluous + parameter. Remove it. + + Signed-off-by: Guennadi Liakhovetski + +commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d +Author: Sergej Stepanov +Date: Wed Oct 17 11:13:51 2007 +0200 + + add ft_cpu_setup(..) on mpc8260 + + Add ft_cpu_setup(..)-function to adapt it for use with libfdt + based on code from mpc5xxx + + Sigend-off-by: Sergej Stepanov + -- + +commit 6abd82e19ae93c0b4d104e50165e235915ec0875 +Author: Sergej Stepanov +Date: Wed Oct 17 11:18:42 2007 +0200 + + changes for IDS8247 board support + + To get the IDS8247 board working following are done: + - FCC2 is deactivated + - FCC1 is activated + - I2C is activated + - CFI driver is activated + - Adapted for use with LIBFDT + + Signed-off-by: Sergej Stepanov + -- + +commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c +Author: Haavard Skinnemoen +Date: Wed Oct 24 15:48:37 2007 +0200 + + ATSTK1002: Remove default ethernet addresses + + Wolfgang is right: It's not a good idea to set up default initial + ethernet addresses for a board, even though they belong to the local + range. + + This will change the failure mode from "IT manager screams at you for + using duplicate ethernet addresses" to a nice error message explaining + that the ethernet address hasn't been set properly. + + Signed-off-by: Haavard Skinnemoen + +commit e5c794e491a57d829b6d8733e2ed8368a2269abf +Author: Justin Flammia +Date: Mon Oct 29 17:40:35 2007 -0400 + + DHCP Client Fix + + This is a multi-part message in MIME format. + + commit e6e505eae94ed721e123e177489291fc4544b7b8 + Author: Justin Flammia + Date: Mon Oct 29 17:19:03 2007 -0400 + + Found a bug in the way the DHCP Request packet is built, where the IP address + that is offered by the server is bound to prematurely. This patch is a fix of + that bug where the IP address offered by the DHCP server is not used until + after the DHCP ACK from the server is received. + + Signed-off-by: Justin Flammia + Signed-off-by: Ben Warren + +commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed +Author: TsiChungLiew +Date: Thu Oct 25 17:16:22 2007 -0500 + + ColdFire 54455: Fix correct boot location for atmel and intel + + Signed-off-by: TsiChungLiew + +commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb +Author: TsiChungLiew +Date: Thu Oct 25 17:14:00 2007 -0500 + + ColdFire: Fix build error when CONFIG_WATCHDOG is defined + + Signed-off-by: TsiChungLiew + +commit c67e12e705b204cfe914e3e3e693d69a445dcabf +Author: TsiChungLiew +Date: Thu Oct 25 17:12:36 2007 -0500 + + ColdFire 5329: Assign correct SDRAM size and fix cache + + Signed-off-by: TsiChungLiew + +commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b +Author: TsiChungLiew +Date: Thu Oct 25 17:10:23 2007 -0500 + + ColdFire 5253: Assign correct SDRAM size + + Signed-off-by: TsiChungLiew + +commit 2acefa72ee0026f862ab65597ca687428f63a973 +Author: TsiChungLiew +Date: Thu Oct 25 17:09:17 2007 -0500 + + ColdFire 5282: Fix external flash boot and return dramsize + + Signed-off-by: TsiChungLiew + +commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82 +Author: Bartlomiej Sieka +Date: Thu Oct 25 17:20:01 2007 +0200 + + TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk). + + Signed-off-by: Bartlomiej Sieka + +commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834 +Author: Martin Krause +Date: Wed Oct 24 08:42:25 2007 +0200 + + TQM5200: fix spurious characters on second serial interface + + With this patch PSC3 is configured as UART. This is done, because if + the pins of PSC3 are not configured at all (-> all pins are GPI), + due to crosstalk, spurious characters may be send over the RX232_2_TXD + signal line. + + Signed-off-by: Martin Krause + Signed-off-by: Grant Likely + +commit be4a87f11e297a5cededbf7dd71c0248f3874acd +Author: Martin Krause +Date: Wed Oct 24 08:41:27 2007 +0200 + + TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller + + Some commands for the STK52xx base board try to access the SM501 grafic + controller. But the TQM5200S has no grafic controller (only the TQM5200 + and the TQM5200B have). This patch deactivates the commands accessing + the SM501 for the TQM5200S. + + Signed-off-by: Martin Krause + Signed-off-by: Grant Likely + +commit b31f64343ead9482cd439b1adbe4c34026a641b1 +Author: Martin Krause +Date: Mon Oct 22 16:45:53 2007 +0200 + + TQM5200: fix spurious characters on second serial interface + + With this patch PSC3 is configured as UART. This is done, because if + the pins of PSC3 are not configured at all (-> all pins are GPI), + due to crosstalk, spurious characters may be send over the RX232_2_TXD + signal line. + + Signed-off-by: Martin Krause + +commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6 +Author: Martin Krause +Date: Mon Oct 22 16:40:06 2007 +0200 + + TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller + + Some commands for the STK52xx base board try to access the SM501 grafic + controller. But the TQM5200S has no grafic controller (only the TQM5200 + and the TQM5200B have). This patch deactivates the commands accessing + the SM501 for the TQM5200S. + + Signed-off-by: Martin Krause + +commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Oct 21 09:14:28 2007 +0200 + + Mips: Fix string functions differ prototype declaration + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2 +Author: Ed Swarthout +Date: Fri Oct 19 17:51:40 2007 -0500 + + fsl_pci_init enable COMMAND_MEMORY if inbound window + + Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows + to pciauto_setup_device has the side effect of not getting + COMMAND_MEMORY set. + + Signed-off-by: Ed Swarthout + +commit e9d0d527992566ebef9826962ff1745b2f082b92 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 19 10:55:24 2007 +0200 + + delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9c4884f54da982ce990c7d1760ac81b0704d3c64 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 19 08:10:15 2007 +0200 + + fix warning: no return statement in function returning non-void + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e78220f6e514206757acfe247297fc9a328a881f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 19 06:33:45 2007 +0200 + + xsengine: Fix no partition type specified, use DOS as default + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 10cdb8dbd67a818823ab9ec88b68fc348903db59 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 19 00:24:59 2007 +0200 + + lubbock: Fix no partition type specified, use DOS as default + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191 +Author: Wolfgang Denk +Date: Tue Oct 23 16:50:03 2007 +0200 + + Coding style: keep lists sorted; update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 58b74b05c621e2835ecf4e2d3243042cf4186777 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 19 00:09:05 2007 +0200 + + Fix missing drivers makefile entries ds1722.c mw_eeprom.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 96455bfebc9887837095c9051d216f53c61b5f10 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Oct 19 00:07:39 2007 +0200 + + Fix warning differ in signedness in board/innokom/innokom.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd +Author: Marcel Ziswiler +Date: Fri Oct 19 00:25:33 2007 +0200 + + fix pxa255_idp board + + The pxa255_idp being an old unmaintained board showed several issues: + 1. CONFIG_INIT_CRITICAL was still defined. + 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. + 3. Symbol flash_addr was undeclared. + 4. The boards lowlevel_init function was still called memsetup. + 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. + 6. Using -march=armv5 instead of -march=armv5te resulted in lots of + 'target CPU does not support interworking' warnings on recent compilers. + 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as + indexes rather than the register definitions from the pxa-regs header + file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to + avoid any ambiguities. + 8. There were several redefinition warnings concerning ICMR, OSMR3, + OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. + 9. The board configuration file was rather outdated. + 10. The part header file defined the vendor, product and revision arrays + as unsigned chars instead of just chars in the block_dev_desc_t + structure. + + Signed-off-by: Marcel Ziswiler + +commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6 +Author: Rune Torgersen +Date: Wed Oct 17 11:56:31 2007 -0500 + + Make MPC8266ADS command selection more robust + + Fix MPC8266 command line definition so it won't break when new commands + are added to u-boot. + Signed-off-by Rune Torgersen + +commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315 +Author: Bartlomiej Sieka +Date: Tue Oct 23 13:14:10 2007 +0200 + + Motion-PRO: Update configuration to accomodate next generation board. + + New board has faster oscillator and a different Flash chip. This affects: + - CFG_MPC5XXX_CLKIN + - SDRAM timings + - Flash CS configuration (timings) + - Flash sector size, and thus MTD partition layout + - malloc() arena size (due to bigger Flash sectors) + - smaller memory test range (due to bigger malloc() arena) + + This patch also enables more extensive memory testing via "mtest". + + Signed-off-by: Bartlomiej Sieka + +commit eff501904df2bf1724a750062628ba2c51dbb1f8 +Author: Bartlomiej Sieka +Date: Tue Oct 23 11:36:07 2007 +0200 + + Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration. + + Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay + register must be written a value of 0x00000004 as the first step of the + SDRAM contorller configuration. + + Signed-off-by: Bartlomiej Sieka + +commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54 +Author: Peter Pearse +Date: Tue Oct 23 10:22:16 2007 +0100 + + Move PL01* serial drivers to drivers/serial and adjust Makefiles. + +commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d +Author: Vlad Lungu +Date: Sun Oct 21 22:10:10 2007 +0900 + + [MIPS] Fix UNCACHED_SDRAM + + PHYSADDR is for physical address, KSEG1ADDR is for uncached. + + Signed-off-by: Vlad Lungu + Signed-off-by: Shinya Kuribayashi + +commit 00101dd7a32d12f698150123e47e4b3420279f86 +Author: Shinya Kuribayashi +Date: Sun Oct 21 21:30:42 2007 +0900 + + [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup + + Signed-off-by: Shinya Kuribayashi + +commit eb700636db017d310edaeb559b13d82588560674 +Author: Shinya Kuribayashi +Date: Sun Oct 21 10:55:37 2007 +0900 + + [MIPS] u-boot.lds: Define _gp in a standard manner + + Signed-off-by: Shinya Kuribayashi + +commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0 +Author: Shinya Kuribayashi +Date: Sun Oct 21 10:55:36 2007 +0900 + + [MIPS] Fix $gp usage + + Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use. + As a general principle, we should use _gp for $gp. + + Thanks to linker script's help we fortunately have _gp which equals to + _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not + be able to access to GOT entires, global variables and procedure entry + points. The right thing to do is to use _gp. + + This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_' + which holds the offset from _gp. When updating GOT entries, we use this + offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_. + + This patch is originally submitted by Vlad Lungu , then + I made some change to leave over num_got_entries. + + Signed-off-by: Shinya Kuribayashi + Cc: Vlad Lungu + +commit cbf2323b5b8285ea01acba7bbb905a3162d9b021 +Author: Shinya Kuribayashi +Date: Sun Oct 21 10:55:36 2007 +0900 + + [MIPS] u-boot.lds: Fix __got_start and __got_end + + Ensure that __got_start points to top of the `.got', and __got_end points + to bottom as well, so that we never fail to count num_got_entries. + + Signed-off-by: Shinya Kuribayashi + +commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7 +Author: Shinya Kuribayashi +Date: Sun Oct 21 10:55:36 2007 +0900 + + [MIPS] u-boot.lds: Remove duplicated .sdata section + + Signed-off-by: Shinya Kuribayashi + +commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1 +Author: Wolfgang Denk +Date: Sun Oct 21 01:01:17 2007 +0200 + + Minor coding style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c +Author: Vlad Lungu +Date: Thu Oct 4 20:47:10 2007 +0300 + + Fix NE2000 driver: + + Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try + to do anything in eth_stop() if eth_init() was not called. + Simplified RX path in order to avoid timeouts on really really + fast NE2000 cards (read: qemu with internal tftp), NetLoop() is + clever enough to cope with 1 packet per eth_rx(). + + Signed-off-by: Vlad Lungu + +commit df90968b48fb34fa9072fab150db2ac89678f537 +Author: urwithsughosh@gmail.com +Date: Mon Sep 24 13:32:13 2007 -0400 + + Setting MSR[DE] in do_reset + + Hello, + This patch ensures the soft reset of the board for the 85xx boards + by setting the MSR[DE] in the do_reset function. + + Signed-off-by: Sughosh Ganu + +commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d +Author: urwithsughosh@gmail.com +Date: Mon Sep 24 13:36:01 2007 -0400 + + MSR overwrite fix + + Hello, + This patch fixes the MSR overwrite in the start.S when moving out of + the last 4K page. + + Signed-off-by: Sughosh Ganu + +commit 5c7ea64bb74a850a2b2303f853a8270695ad8602 +Author: Dan Wilson +Date: Fri Oct 19 11:33:48 2007 -0500 + + tsec driver should clear RHALT on startup + + This was causing problems for some people. + + Signed-off-by: Alain Gravel + Signed-off-by: Dan Wilson + Signed-off-by: Andy Fleming + +commit 7600d47b8f6a10019e537dc9a62aa1498df58d25 +Author: Kumar Gala +Date: Thu Oct 11 00:29:18 2007 -0500 + + Improve handling of PCI interrupt device tree fixup on MPC85xx CDS + + On the MPC85xx CDS we have two issues: + + 1. The device tree fixup code did not check to see if the property we are + trying to update is actually found. Its possible that it would update + random memory starting at 0. + + 2. Newer Linux kernel's have moved the location of the PCI nodes to be + sibilings of the soc node and not children. The explicit PATH to the PCI + node would not be found for these device trees. Add the ability to handle + both paths. In the future we shouldn't handle such fixups by explicit path. + + Signed-off-by: Kumar Gala + +commit a3063eec775719b7e91023bbec3f64b3118791df +Author: Kumar Gala +Date: Thu Oct 11 00:18:48 2007 -0500 + + Set OF_STDOUT_PATH to match the default console on MPC8568 MDS + + On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured + console. Make it so we match that config what we tell Linux as the early + STDOUT console. + + Signed-off-by: Kumar Gala + +commit e1ce3cb617bb06f91f82f98915391175addf3e82 +Author: Kumar Gala +Date: Tue Oct 2 11:12:27 2007 -0500 + + Remove magic numbers from cache related operations for mpc85xx + + The mpc85xx start code uses some magic numbers that we actually + have #defines for in so use those instead. + + Signed-off-by: Kumar Gala + +commit 5441f61a3d8b7034f19fc1361183e936198e6dbb +Author: Detlev Zundel +Date: Fri Oct 19 16:47:26 2007 +0200 + + Fix two typos. + + Signed-off-by: Detlev Zundel + +commit 281df457c1aa50d2752165d0c5c3282d4027b974 +Author: Tony Li +Date: Thu Oct 18 17:47:19 2007 +0800 + + mpc83xx: Add configure entry for MPC83xx ATM support + + Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into + Makfile and MAKEALL + + Signed-off-by: Tony Li + Signed-off-by: Kim Phillips + +commit d2646554f529a9577515eceb0ec5eceee18244ba +Author: Tony Li +Date: Thu Oct 18 17:44:38 2007 +0800 + + mpc83xx: pq-mds-pib.c typo error + + Correct to val8 from val. + + Signed-off-by: Tony Li + Signed-off-by: Kim Phillips + +commit 3e11ae80fec1ee12194940955431186abf6009c2 +Author: Stefan Roese +Date: Wed Oct 17 15:40:19 2007 +0200 + + ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command + + Signed-off-by: Stefan Roese + +commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd +Author: runet@innovsys.com +Date: Tue Oct 16 14:50:40 2007 -0500 + + Make MPC8266ADS board compile again. + + Signed-off-by: Runet Torgersen + +commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a +Author: Jon Loeliger +Date: Mon Aug 27 12:41:03 2007 -0500 + + 86xx: Allow for fewer DDR slots per memory controller. + + As a direct correlation exists between DDR DIMM slots + and SPD EEPROM addresses used to configure them, use + the individually defined SPD_EEPROM_ADDRESS* values to + determine if a DDR DIMM slot should have its SPD + configuration read or not. + + Effectively, this now allows for 1 or 2 DIMM slots + per memory controller. + + Signed-off-by: Jon Loeliger + +commit 4d4a945e189a2f384c66432316da2788a0ac1607 +Author: Rodolfo Giometti +Date: Mon Oct 15 11:59:17 2007 +0200 + + PXA USB OHCI: "usb stop" implementation. + + Some USB keys need to be switched off before loading the kernel + otherwise they can remain in an undefined status which prevents them + to be correctly recognized by the kernel. + + Signed-off-by: Rodolfo Giometti + +commit e2e93442e558cf1500e92861f99713b2f045ea22 +Author: Stefan Roese +Date: Mon Oct 15 11:39:00 2007 +0200 + + ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier + + The I2C bootstrap values that can be setup via the "bootstrap" command, + were setup incorrect regarding the generation of the internal sync PCI + clock. The values for PLB clock == 133MHz were slighly incorrect and the + values for PLB clock == 166MHz were totally incorrect. This could + lead to a hangup upon booting while PCI configuration scan. + + This patch fixes this issue and configures valid PCI divisor values + for the sync PCI clock, with respect to the provided external async + PCI frequency. + + Here the values of the formula in the chapter 14.2 "PCI clocking" + from the 440EPx users manual: + + AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz + + 33MHz async PCI frequency: + PLB = 133: + => 32 <= 44.3 <= 65 (div = 3) + + PLB = 166: + => 32 <= 55.3 <= 65 (div = 3) + + 66MHz async PCI frequency: + PLB = 133: + => 65 <= 66.5 <= 132 (div = 2) + + PLB = 166: + => 65 <= 83 <= 132 (div = 2) + + Signed-off-by: Stefan Roese + +commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587 +Author: Stefan Roese +Date: Mon Oct 15 11:29:33 2007 +0200 + + ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite + + The BCSR status bit for the 66MHz PCI operation was correctly + addressed (MSB/LSB problem). Now the correct currently setup + PCI frequency is displayed upon bootup. + + This patch also fixes this problem on Rainier & Yellowstone, since these + boards use the same souce code as Sequoia & Yosemite do. + + Signed-off-by: Stefan Roese + +commit da3aad55cbde80ab6e301aafa82a2c411aa53eff +Author: Martin Krause +Date: Wed Sep 26 17:55:56 2007 +0200 + + TQM860M: adjust for doubled flash sector size. + + Adjust flash map to support the new S29GLxxN (N-Type) Flashes with + doubled sector size. + + Signed-off-by: Martin Krause + +commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d +Author: Jens Gehrlein +Date: Wed Sep 26 17:55:54 2007 +0200 + + TQM8xx: Fix CAN timing. + + Signed-off-by: Martin Krause + +commit d43e489baf02afae49077791fb22332d240d8656 +Author: Martin Krause +Date: Thu Sep 27 14:54:36 2007 +0200 + + TQM866M: fix SDRAM refresh + + At 133 MHz the current SDRAM refresh rate is too fast + (measured 4 * 1.17 us). + CFG_MAMR_PTA changes from 39 to 97. This result + in a refresh rate of 4 * 7.8 us at the default clock + 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. + This is a compromise until a new method is found to + adjust the refresh rate. + + Signed-off-by: Martin Krause + +commit 9ef57bbee1c67cc01da2026c242c4692db32be36 +Author: Martin Krause +Date: Wed Sep 26 17:55:55 2007 +0200 + + TQM866M: adjust for doubled flash sector size. + + Adjust flash map to support the new S29GLxxN (N-Type) Flashes with + doubled sector size. + + Signed-off-by: Martin Krause + +commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763 +Author: Michal Simek +Date: Sun Oct 14 16:12:29 2007 +0200 + + [FIX] XUPV2P change command handling + and remove code violation + +commit 636400198228d96983c06657b17f760f5989958e +Author: Wolfgang Denk +Date: Sun Oct 14 00:13:19 2007 +0200 + + Prepare for 1.3.0-rc3 release + + Signed-off-by: Wolfgang Denk + +commit 68f14f77ca5fe5f9cc025c8cae101671f628309f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Sep 29 13:41:37 2007 +0200 + + Fix warning differ in signedness in cpu/pxa/mmc.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit fc19e36f741e8bc727c0a330170b3b5db90399ef +Author: Wolfgang Denk +Date: Sat Oct 13 23:51:14 2007 +0200 + + Fix warning differ in signedness in board/mpl/vcma9/vcma9.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk + +commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296 +Author: Wolfgang Denk +Date: Sat Oct 13 21:15:39 2007 +0200 + + Coding Style cleanup. + + Signed-off-by: Wolfgang Denk + +commit e1893815b0999410d7a327589611c7b38e95299e +Author: Wolfgang Denk +Date: Fri Oct 12 15:49:39 2007 +0200 + + GP3 SSA: enable RTC + + Signed-off-by: Wolfgang Denk + +commit 8002012041f1ff9f997a5727abe5015f70cd2e46 +Author: Grzegorz Bernacki +Date: Tue Oct 9 13:58:24 2007 +0200 + + [ads5121] EEPROM support added. + + Signed-off-by: Grzegorz Bernacki + +commit 7b624ad254b97e5a25dca2304a398b64aeedaffe +Author: Haavard Skinnemoen +Date: Sat Oct 6 18:55:35 2007 +0200 + + AVR32: Initialize bi_flash* in board_init_r + + The ATSTK1000-specific flash driver intializes bi_flashstart, + bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI + driver, don't. + + Initialize these in board_init_r instead so that things will still be + set up correctly when we switch to the CFI driver. + + Signed-off-by: Haavard Skinnemoen + +commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8 +Author: Marian Balakowicz +Date: Fri Oct 5 10:40:54 2007 +0200 + + tqm5200: Fix CONFIG_CMD_PCI typo in board config file. + + Signed-off-by: Marian Balakowicz + +commit 92869195ef8210758d2176230c0a36897afd50ed +Author: Bartlomiej Sieka +Date: Fri Oct 5 09:46:06 2007 +0200 + + CM5200: Fix missing null-termination in hostname manipulation code + + Signed-off-by: Bartlomiej Sieka + +commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87 +Author: Haavard Skinnemoen +Date: Tue Oct 2 19:09:01 2007 +0200 + + Fix memtest breakage + + CFG_MEMTEST_START uses weird magic involving gd, which fails to + compile. Use hardcoded values instead (we actually know how much RAM + we have on board.) + + Signed-off-by: Haavard Skinnemoen + +commit 738815c0cc44aa329097f868dc1efc49ede9c5ba +Author: Stefan Roese +Date: Tue Oct 2 11:44:46 2007 +0200 + + ppc4xx: Coding style cleanup + + Signed-off-by: Stefan Roese + +commit 87c1833a39e944db66385286fd5e28f9b3fcdd50 +Author: Stefan Roese +Date: Tue Oct 2 11:44:19 2007 +0200 + + ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet + + Signed-off-by: Stefan Roese + +commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670 +Author: Grzegorz Bernacki +Date: Mon Oct 1 09:51:50 2007 +0200 + + Program EPLD to force full duplex mode for PHY. + + EPLD forces modes of PHY operation. By default full duplex is turned off. + This fix turns it on. + + Signed-off-by: Grzegorz Bernacki + +commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818 +Author: Timo Ketola +Date: Mon Sep 24 14:50:32 2007 +0300 + + Bugfix: Use only one PTD for one endpoint + + Original isp116x-hcd code prepared multiple PTDs for longer than 16 + byte transfers for one endpoint. That is unnecessary because the + ISP116x is able to split long data from one PTD into multiple + transactions based on the buffer size of the endpoint. It also caused + serious problems if the endpoint NAKed some of the transactions. In + that case ISP116x wouldn't notice that the other PTDs were for the same + endpoint and would try the other PTDs possibly out of order. That would + break the whole transfer. + + This patch makes isp116x_submit_job to use one PTD for one transfer. + + Signed-off-by: Timo Ketola + Signed-off-by: Markus Klotzbuecher + +commit 86ec86c04326c3913178a7679aa910de071da75d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Sep 27 23:27:47 2007 +0200 + + Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 3e954beb614b5b190d7f4f4c3b641437a0132e35 +Author: Stefan Roese +Date: Tue Sep 11 14:12:55 2007 +0200 + + ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) + + Signed-off-by: Stefan Roese + +commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a +Author: Ed Swarthout +Date: Wed Sep 26 16:35:54 2007 -0500 + + 85xx io out functions need sync after write. + + This fixes the mc146818 rtc_read/write functions for 85xx. + + Signed-off-by: Ed Swarthout + +commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae +Author: Grant Likely +Date: Tue Sep 25 15:48:05 2007 -0600 + + Fpga: fix incorrect test of CFG_FPGA_XILINX macro + + CFG_FPGA_XILINX is a bit value used to test against the value in + CONFIG_FPGA. Testing for a value will always return TRUE. I don't + think that is the intention in this code. + + Signed-off-by: Grant Likely + +commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166 +Author: Michal Simek +Date: Mon Sep 24 00:41:30 2007 +0200 + + [FIX] change command handling and removing code violation + +commit f240356507038e5ce55e8a24cb2607e9eae6d10c +Author: Michal Simek +Date: Mon Sep 24 00:36:06 2007 +0200 + + [FIX] change sets of commands + because changing of command handling brings + compilation problems + +commit cb1bc63b75a232571eb69aa2c8aa919321655845 +Author: Michal Simek +Date: Mon Sep 24 00:30:42 2007 +0200 + + [FIX] Email reparation & Copyright + Both codes are written by myself without any + support from CTU + +commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852 +Author: Michal Simek +Date: Mon Sep 24 00:25:11 2007 +0200 + + [PATCH] Change macro name for UartLite + because PowerPC 405 can use UartLite as console + +commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716 +Author: Michal Simek +Date: Mon Sep 24 00:21:19 2007 +0200 + + [PATCH] Add support for design without interrupt controller + Polling timer + +commit 0731933ec8ec45d02ba89b52df673d526873cdde +Author: Michal Simek +Date: Mon Sep 24 00:19:48 2007 +0200 + + [FIX] resolve problem with cpu without barrel shifter + +commit db14d77995ce515b728b178b63f82babe60e3d56 +Author: Michal Simek +Date: Mon Sep 24 00:18:46 2007 +0200 + + [FIX] repair email address + +commit 481d4328618804add1f818a6c96296121cd0528e +Author: Michal Simek +Date: Mon Sep 24 00:17:42 2007 +0200 + + [FIX] repair MFSL commands + +commit b90c045f035c3cc9b5d2edaed6048dfb74e40763 +Author: Michal Simek +Date: Mon Sep 24 00:08:37 2007 +0200 + + synchronizition with mainline + +commit 66dcad3a9a53e0766d90e0084123bd8529522fb0 +Author: Wolfgang Denk +Date: Thu Sep 20 00:04:14 2007 +0200 + + v1.3.0-rc2 + + Signed-off-by: Wolfgang Denk + commit 135e19bc2773ebca487e9a8371f67e1ba202313a Author: Wolfgang Denk Date: Tue Sep 18 21:36:35 2007 +0200 @@ -38,6 +1048,98 @@ Date: Tue Sep 18 17:40:27 2007 +0200 Signed-off-by: Wolfgang Denk +commit bd86220f58b99d6896198c385fda132f0c980915 +Author: Peter Pearse +Date: Tue Sep 18 13:07:54 2007 +0100 + + Move coloured led API to status_led.h + Improve indentation in drivers/at45.c + +commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7 +Author: Eirik Aanonsen +Date: Tue Sep 18 08:47:20 2007 +0200 + + Update atstk1002 bootargs. + + Updates to atstk1002 U-Boot header file: + - Changed bootargs: + * Set the bootargs for at1002 to point to the SD-card partition instead + * ... of the boot flash. + * Removing the rootfstype since that argument are not needed. + + Signed-off-by: Eirik Aanonsen + Signed-off-by: Haavard Skinnemoen + +commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225 +Author: Eirik Aanonsen +Date: Wed Sep 12 13:32:37 2007 +0200 + + Add some comments to clocks in atstk1002.h + + This patch applies some clarifying comments to how the different + clocks are setup according to atstk1002.h Some of the previous + comments where stating wrongful information. + + Signed-off-by: Haavard Skinnemoen + +commit 97213f32416ead885deafea86774e912ffd60ad0 +Author: David Saada +Date: Mon Sep 17 17:04:47 2007 +0200 + + Description: Add NEC's PCI OHCI module ID to the USB OHCI driver + + Signed-off-by: David Saada + +commit 30363e98fa470fbecea5e8bc0f1443352754f303 +Author: Stefan Roese +Date: Mon Sep 17 08:20:47 2007 +0200 + + Small whitespace cleanup of OneNAND patch + + Signed-off-by: Stefan Roese + +commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1 +Author: Kyungmin Park +Date: Mon Sep 10 17:15:14 2007 +0900 + + OneNAND support (take #2) + + [PATCH 3/3] OneNAND support (take #2) + + OneNAND support at U-Boot + + Signed-off-by: Kyungmin Park + +commit 17aa2800457df0c06b41516f46f126712c196219 +Author: Kyungmin Park +Date: Mon Sep 10 17:14:34 2007 +0900 + + OneNAND support (take #2) + + [PATCH 2/3] OneNAND support (take #2) + + OneNAND support at U-Boot + + Signed-off-by: Kyungmin Park + +commit 916527f4809a7bcd811f1f1daf34af184e31dd8c +Author: Kyungmin Park +Date: Mon Sep 10 17:13:49 2007 +0900 + + OneNAND support (take #2) + + [PATCH 1/3] OneNAND support (take #2) + + OneNAND support at U-Boot + + Signed-off-by: Kyungmin Park + +commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5 +Author: Michal Simek +Date: Sun Sep 16 20:51:57 2007 +0200 + + [FIX] remove files form repository + commit 67c31036acaaaa992fc346cc89db0909a7e733c4 Author: Wolfgang Denk Date: Sun Sep 16 17:10:04 2007 +0200 @@ -185,6 +1287,25 @@ Date: Sat Sep 15 11:55:42 2007 +0200 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805 +commit 991b089d1ce5ad945725e3657a8f106dfa02a38e +Author: Michal Simek +Date: Sat Sep 15 00:03:35 2007 +0200 + + Synchronize with U-BOOT mainline + +commit d7fee32b7e61fe11c64e371cde79faa4768e8350 +Author: Sam Sparks +Date: Fri Sep 14 11:14:42 2007 -0600 + + Update MPC8349ITX*_config to place config.tmp in right place. + + MPC834ITX*_config does not store config.tmp at the correct locatation, + causing MPC8349ITXGP to have the wrong TEXT_BASE. + + Signed-off-by: Sam Sparks + Signed-off-by: Grant Likely + Signed-off-by: Kim Phillips + commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c Author: Bartlomiej Sieka Date: Thu Sep 13 18:21:48 2007 +0200 @@ -193,6 +1314,18 @@ Date: Thu Sep 13 18:21:48 2007 +0200 Signed-off-by: Marian Balakowicz +commit e1f601b572db5de9aa81a0b77c68a86994fe24c4 +Author: Bartlomiej Sieka +Date: Thu Sep 13 16:33:59 2007 +0200 + + tqm5200: Restore customary env. variable boot commands for powerpc kernels + + - update default definitions of kernel_addr and fdt_addr env. variables + - make arch/powerpc booting the default scenario + - update MTD partition layout to match the above + + Signed-off-by: Bartlomiej Sieka + commit f34024d4a328e6edd906456da98d2c537155c4f7 Author: Wolfgang Denk Date: Wed Sep 12 00:48:57 2007 +0200 @@ -201,6 +1334,12 @@ Date: Wed Sep 12 00:48:57 2007 +0200 Signed-off-by: Wolfgang Denk +commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc +Author: Peter Pearse +Date: Tue Sep 11 15:35:01 2007 +0100 + + Final tidy + commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e Author: Grzegorz Bernacki Date: Tue Sep 11 15:42:11 2007 +0200 @@ -222,6 +1361,12 @@ Date: Tue Sep 11 12:57:52 2007 +0200 Signed-off-by: Grzegorz Bernacki +commit d45963854eff39d575124d859419bb4953ce2c87 +Author: Michal Simek +Date: Tue Sep 11 00:37:04 2007 +0200 + + [FIX] Microblaze ML401 - repare FLASH handling + commit 38c1ef728d19950414a8ab1ccfc53767848fa346 Author: Sean MCGOOGAN Date: Mon Sep 10 16:55:59 2007 +0100 @@ -507,6 +1652,14 @@ Date: Thu Sep 6 09:46:17 2007 -0600 Signed-off-by: Grant Likely +commit 80767a6cead9990d9e77e62be947843c2c72f469 +Author: Peter Pearse +Date: Wed Sep 5 16:04:41 2007 +0100 + + Changed API name to coloured_led.h + Removed code using deprecated ifdef CONFIG_BOOTBINFUNC + Tidied other cpu/arm920t/start.S code + commit 56a9270521baaa00e12639a978302a67f61ef060 Author: Kumar Gala Date: Thu Aug 30 16:18:18 2007 -0500 @@ -532,6 +1685,31 @@ Date: Thu Aug 30 01:58:48 2007 -0500 Signed-off-by: Ed Swarthout +commit 9f5c3d3720e777a572dcdc8af2008b44c7243885 +Author: Peter Pearse +Date: Tue Sep 4 16:18:38 2007 +0100 + + Add coloured led interface for ARM boards. + Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered. + +commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb +Author: Peter Pearse +Date: Tue Sep 4 14:49:28 2007 +0100 + + Move include/led.h to board/at91rm9200dk + +commit 6e4bf9b24e57c15abc6542e685d06380bc64af27 +Author: Peter Pearse +Date: Tue Sep 4 14:25:51 2007 +0100 + + Ran Lindent on drivers/at45.c + +commit 557ab89d294f08dd532f21d19861b40093200a33 +Author: Peter Pearse +Date: Tue Sep 4 14:23:50 2007 +0100 + + Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX + commit 81b73dec16fd1227369a191e725e10044a9d56b8 Author: Gary Jennejohn Date: Fri Aug 31 15:21:46 2007 +0200 @@ -572,6 +1750,24 @@ Date: Fri Aug 31 10:01:51 2007 +0200 Signed-off-by: Wolfgang Denk +commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee +Author: Hans-Christian Egtvedt +Date: Thu Aug 30 15:03:05 2007 +0200 + + Reduce BOOTDELAY variable to 1 second by default for STK1002 + + Signed-off-by: Hans-Christian Egtvedt + Signed-off-by: Haavard Skinnemoen + +commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a +Author: Hans-Christian Egtvedt +Date: Thu Aug 30 15:03:04 2007 +0200 + + Remove double quotation marks around MAC address for STK1002 + + Signed-off-by: Hans-Christian Egtvedt + Signed-off-by: Haavard Skinnemoen + commit ff13ac8c7bbebb238e339592de765c546dba1073 Author: Wolfgang Denk Date: Thu Aug 30 14:42:15 2007 +0200 @@ -607,6 +1803,20 @@ Date: Wed Aug 29 18:26:24 2007 -0600 Signed-off-by: Grant Likely +commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143 +Author: Stefan Roese +Date: Wed Aug 29 16:31:18 2007 +0200 + + ppc4xx: Change lwmon5 default environment to support Linux RTC + + The Linux PCF8563 RTC driver doesn't do autoprobing, so we need + to supply the RTC I2C address as bootline parameter. This patch + adds support for this rtc probing parameter to the bootargs: + + "rtc-pcf8563.probe=0,0x51" + + Signed-off-by: Stefan Roese + commit 2602a5c40ae37ab965a4e240854fdaffb51328a4 Author: Kim Phillips Date: Wed Aug 29 09:06:05 2007 -0500 @@ -820,6 +2030,15 @@ Date: Tue Aug 28 17:39:14 2007 +0200 Signed-off-by: Heiko Schocher +commit 2c05fd125744981e5f2828d24e66ccc20a77d25d +Author: Semih Hazar +Date: Mon Aug 20 19:00:01 2007 +0300 + + AVR32: Change prototype of memset + + Signed-off-by: Semih Hazar + Signed-off-by: Haavard Skinnemoen + commit 9c02defc29b57945b600714cf61ddfd02b02fb14 Author: Yuri Tikhonov Date: Sat Aug 25 05:07:16 2007 +0200 @@ -1345,6 +2564,18 @@ Date: Fri Jun 22 17:32:28 2007 +0200 Signed-off-by: Reinhard Arlt Signed-off-by: Stefan Roese +commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e +Author: Michal Simek +Date: Thu Aug 16 10:46:28 2007 +0200 + + [FIX] Changes for bios_emulator code for others architecture + +commit 6e0e2253f039344f8ebd2787285fdba90e6714e8 +Author: Michal Simek +Date: Thu Aug 16 10:45:09 2007 +0200 + + [FIX] Remove unused include file + commit 9de469bd960cc1870bb40d6672ed42726b8b50d7 Author: Stefan Roese Date: Thu Aug 16 10:18:33 2007 +0200 @@ -1440,6 +2671,25 @@ Date: Wed Aug 15 22:30:05 2007 -0500 Signed-off-by: Kim Phillips +commit 5b4de9309d7a03aa1db2e5391ab696363391f460 +Author: Michal Simek +Date: Wed Aug 15 21:15:05 2007 +0200 + + [FIX] Resolve problem with warnings + microblaze toolchain don't support PRAGMA PACK. + +commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4 +Author: Michal Simek +Date: Wed Aug 15 21:05:07 2007 +0200 + + [FIX] Correction command setting for Microblaze boards + +commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5 +Author: Michal Simek +Date: Wed Aug 15 21:03:41 2007 +0200 + + [FIX] Correction command definition + commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 Author: Jon Loeliger Date: Wed Aug 15 11:55:35 2007 -0500 @@ -2920,6 +4170,24 @@ Date: Tue Aug 7 16:02:13 2007 +0200 Signed-off-by: Wolfgang Denk +commit 706714d97a0d08d59eda4de2268c39f504688329 +Author: Michal Simek +Date: Mon Aug 6 23:41:53 2007 +0200 + + [FIX] remove cute code + +commit f500d9fdeb576288656dac427052ad2c5ca0ad1a +Author: Michal Simek +Date: Mon Aug 6 23:35:26 2007 +0200 + + [FIX] Fix romfs code + +commit ab4b956d3143f8f8174089053f5dfabbb04762b0 +Author: Michal Simek +Date: Mon Aug 6 23:31:49 2007 +0200 + + [FIX] Coding style cleanup - Wolfgang's suggestions + commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 Author: Wolfgang Denk Date: Mon Aug 6 23:21:05 2007 +0200 @@ -3044,6 +4312,32 @@ Date: Thu Aug 2 14:09:49 2007 -0500 Signed-off-by: Zhang Wei Signed-off-by: Jon Loeliger +commit a274ca4f6d68830e7c916f897561cff8c4101c38 +Author: Michal Simek +Date: Sun Aug 5 22:33:05 2007 +0200 + + [FIX] Coding style cleanup + +commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f +Author: Michal Simek +Date: Sun Aug 5 16:13:31 2007 +0200 + + [FIX] Xilinx Uartlite driver + Because PPC405 can use UARTLITE serial interface and + Microblaze can use Uart16550 serial interface not only Uartlite. + +commit 98889edd50aadf862071eb5664747ad0d568a20e +Author: Michal Simek +Date: Sun Aug 5 15:54:53 2007 +0200 + + [FIX] Change configuration for XUPV2P Microblaze board + +commit 537091b4eed9302865d03fef3f7212b4fe5cf28f +Author: Michal Simek +Date: Sun Aug 5 15:53:50 2007 +0200 + + [PATCH] Added support for Xilinx Emac community driver + commit 86b116b1b1e165ca4840daefed36d2e3b8460173 Author: Bartlomiej Sieka Date: Fri Aug 3 12:08:16 2007 +0200 @@ -3344,6 +4638,12 @@ Date: Mon Jul 16 08:53:51 2007 +0200 Signed-off-by: Stefan Roese +commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae +Author: Michal Simek +Date: Mon Jul 16 00:31:07 2007 +0200 + + [PATCH] Support for Xilinx EmacLite controller + commit 3a6cab844cf74f76639d795e0be8717e02c86af7 Author: Wolfgang Denk Date: Sat Jul 14 22:51:02 2007 +0200 @@ -3352,12 +4652,42 @@ Date: Sat Jul 14 22:51:02 2007 +0200 Signed-off-by: Wolfgang Denk +commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1 +Author: Michal Simek +Date: Sat Jul 14 13:11:28 2007 +0200 + + [FIX] support for simply measuring time + +commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43 +Author: Michal Simek +Date: Sat Jul 14 12:41:23 2007 +0200 + + [FS] Added support for ROMFS + commit 011595307731a7a67a7445d107c279d031e8ab97 Author: Heiko Schocher Date: Sat Jul 14 01:06:58 2007 +0200 [PCS440EP] - fix compile error, if BUILD_DIR is used +commit 5a2f1098d81ad58b309e5e558d0492643166a799 +Author: Michal Simek +Date: Sat Jul 14 00:18:48 2007 +0200 + + [PATCH] Support time without timer + +commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0 +Author: Michal Simek +Date: Fri Jul 13 21:43:55 2007 +0200 + + [PATCH] Remove problem with disabled BARREL SHIFTER + +commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94 +Author: Michal Simek +Date: Fri Jul 13 21:41:44 2007 +0200 + + [FIX] correct help for rspr + commit fad63407154f46246ce80d53a9c669a44362ac67 Author: Heiko Schocher Date: Fri Jul 13 09:54:17 2007 +0200 @@ -5542,6 +6872,18 @@ Date: Mon Jun 18 13:50:13 2007 -0500 Signed-off-by: TsiChung Liew +commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27 +Author: Michal Simek +Date: Sun Jun 17 19:04:11 2007 +0200 + + [fix] email reparation + +commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc +Author: Michal Simek +Date: Sun Jun 17 19:03:21 2007 +0200 + + [FIX] fix microblaze file permitission + commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 Author: Stefan Roese Date: Fri Jun 15 11:33:41 2007 +0200