X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Fimx6ul-tx6ul.dtsi;h=9e2a96617d5b763a13f669bd95d77ffe57ed338c;hb=e2eb83a0f829d42e13ed2bb41e97311e40d3adf9;hp=ec745eb3b6a853b1aab6eb7faab14c30e68bcdf7;hpb=3de559d4df546442e28fab91e1c9cab3f19ca24f;p=karo-tx-linux.git

diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index ec745eb3b6a8..9e2a96617d5b 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -308,6 +308,7 @@
 	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-post-delay = <10>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy0>;
 	status = "okay";
@@ -357,8 +358,11 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -817,6 +821,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x4001b0b9
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x4001b0b9
+		>;
+	};
+
 	pinctrl_kpp: kppgrp {
 		fsl,pins = <
 			MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04	0x1b0b0