X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=board%2Ffreescale%2Fmpc8572ds%2Fmpc8572ds.c;h=21252742154748bb2974d0179caf4757c06b5f7d;hb=8ca78f2c89cd058e498fa438f57accc2e810bb98;hp=b6eb28e9c8a62626fe3b20f5c0b0da028ae32bb2;hpb=6d0f6bcf337c5261c08fabe12982178c2c489d76;p=karo-tx-uboot.git diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index b6eb28e9c8..2125274215 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2008 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -25,28 +25,51 @@ #include #include #include +#include #include -#include +#include #include #include #include #include #include +#include +#include -#include "../common/pixis.h" - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif +#include "../common/sgmii_riser.h" long int fixed_sdram(void); int checkboard (void) { - printf ("Board: MPC8572DS, System ID: 0x%02x, " - "System Version: 0x%02x, FPGA Version: 0x%02x\n", - in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), - in8(PIXIS_BASE + PIXIS_PVER)); + u8 vboot; + u8 *pixis_base = (u8 *)PIXIS_BASE; + + puts ("Board: MPC8572DS "); +#ifdef CONFIG_PHYS_64BIT + puts ("(36-bit addrmap) "); +#endif + printf ("Sys ID: 0x%02x, " + "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), + in_8(pixis_base + PIXIS_PVER)); + + vboot = in_8(pixis_base + PIXIS_VBOOT); + switch ((vboot & PIXIS_VBOOT_LBMAP) >> 6) { + case PIXIS_VBOOT_LBMAP_NOR0: + puts ("vBank: 0\n"); + break; + case PIXIS_VBOOT_LBMAP_PJET: + puts ("Promjet\n"); + break; + case PIXIS_VBOOT_LBMAP_NAND: + puts ("NAND\n"); + break; + case PIXIS_VBOOT_LBMAP_NOR1: + puts ("vBank: 1\n"); + break; + } + return 0; } @@ -58,20 +81,12 @@ phys_size_t initdram(int board_type) #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; #else dram_size = fixed_sdram(); #endif + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } @@ -144,389 +159,184 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif -int first_free_busno=0; #ifdef CONFIG_PCI void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + struct fsl_pci_info pci_info[3]; + u32 devdisr, pordevsr, io_sel, temp32; + int first_free_busno = 0; + int num = 0; - debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", - devdisr, io_sel, host_agent); + int pcie_ep, pcie_configured; - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + + debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); + + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) printf (" eTSEC1 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf (" eTSEC2 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) printf (" eTSEC3 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) printf (" eTSEC4 is in sgmii mode.\n"); - + puts("\n"); #ifdef CONFIG_PCIE3 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pcie3_hose; - int pcie_ep = (host_agent == 0) || (host_agent == 3) || - (host_agent == 5) || (host_agent == 6); - int pcie_configured = io_sel >= 1; - u32 temp32; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE3 connected to ULI as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CONFIG_SYS_PCIE3_MEM_BASE, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CONFIG_SYS_PCIE3_IO_BASE, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf (" PCIE3 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - * Device 1d has the first on-board memory BAR. - */ - - pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ), - PCI_BASE_ADDRESS_1, &temp32); - if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) { - debug(" uli1572 read to %x\n", temp32); - in_be32((unsigned *)temp32); - } - } else { - printf (" PCIE3: disabled\n"); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ + SET_STD_PCIE_INFO(pci_info[num], 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); + printf("PCIE3: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + * Device 1d has the first on-board memory BAR. + */ + pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0), + PCI_BASE_ADDRESS_1, &temp32); + if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { + void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), + temp32, 4, 0); + debug(" uli1572 read to %p\n", p); + in_be32(p); } - + } else { + printf("PCIE3: disabled\n"); } + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE2 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pcie2_hose; - int pcie_ep = (host_agent == 2) || (host_agent == 4) || - (host_agent == 6); - int pcie_configured = io_sel & 4; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CONFIG_SYS_PCIE2_MEM_BASE, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CONFIG_SYS_PCIE2_IO_BASE, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - hose->first_busno=first_free_busno; - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - first_free_busno=hose->last_busno+1; - printf (" PCIE2 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE2: disabled\n"); - } - + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ + SET_STD_PCIE_INFO(pci_info[num], 2); + pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); + printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf("PCIE2: disabled\n"); } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif -#ifdef CONFIG_PCIE1 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - extern void fsl_pci_init(struct pci_controller *hose); - struct pci_controller *hose = &pcie1_hose; - int pcie_ep = (host_agent == 1) || (host_agent == 4) || - (host_agent == 5); - int pcie_configured = io_sel & 6; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* inbound */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEMORY_BUS, - CONFIG_SYS_PCI_MEMORY_PHYS, - CONFIG_SYS_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); - - /* outbound memory */ - pci_set_region(hose->regions + 1, - CONFIG_SYS_PCIE1_MEM_BASE, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(hose->regions + 2, - CONFIG_SYS_PCIE1_IO_BASE, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - hose->first_busno=first_free_busno; - - pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); - - fsl_pci_init(hose); - - first_free_busno=hose->last_busno+1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE1: disabled\n"); - } +#ifdef CONFIG_PCIE1 + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + SET_STD_PCIE_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); + printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf("PCIE1: disabled\n"); } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } #endif int board_early_init_r(void) { - unsigned int i; const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = 2; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited * so that flash can be erased properly. */ - /* Invalidate any remaining lines of the flash from caches. */ - for (i = 0; i < 256*1024*1024; i+=32) { - asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i)); - asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i)); - } + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); /* invalidate existing TLB entry for flash + promjet */ disable_tlb(flash_esel); - set_tlb(1, flashbase, flashbase, /* tlb, epn, rpn */ + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) { - const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - return ics307_clk_freq ( - in8(PIXIS_BASE + PIXIS_VSYSCLK0), - in8(PIXIS_BASE + PIXIS_VSYSCLK1), - in8(PIXIS_BASE + PIXIS_VSYSCLK2) - ); -} + struct tsec_info_struct tsec_info[4]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; -unsigned long get_board_ddr_clk(ulong dummy) -{ - return ics307_clk_freq ( - in8(PIXIS_BASE + PIXIS_VDDRCLK0), - in8(PIXIS_BASE + PIXIS_VDDRCLK1), - in8(PIXIS_BASE + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC4 + SET_STD_TSEC_INFO(tsec_info[num], 4); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif - i = in8(PIXIS_BASE + PIXIS_SPD); - i &= 0x07; + if (!num) { + printf("No TSECs initialized\n"); - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; + return 0; } - return val; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; +#ifdef CONFIG_FSL_SGMII_RISER + fsl_sgmii_riser_init(tsec_info, num); +#endif - i = in8(PIXIS_BASE + PIXIS_SPD); - i &= 0x38; - i >>= 3; + tsec_eth_init(bis, tsec_info, num); - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; + return pci_eth_init(bis); } #endif #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; - const char *path; - ulong base, size; + phys_addr_t base; + phys_size_t size; ft_cpu_setup(blob, bd); @@ -535,31 +345,11 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); - node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; - if (node >= 0) { -#ifdef CONFIG_PCIE3 - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif -#ifdef CONFIG_PCIE2 - path = fdt_getprop(blob, node, "pci1", NULL); - if (path) { - tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif -#ifdef CONFIG_PCIE1 - path = fdt_getprop(blob, node, "pci2", NULL); - if (path) { - tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } + FT_FSL_PCI_SETUP; + +#ifdef CONFIG_FSL_SGMII_RISER + fsl_sgmii_riser_fdt_fixup(blob); #endif - } } #endif