X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=common%2Fcmd_i2c.c;h=ad38cbf6e17fe28198ef053b089cf19ffb167292;hb=7b397ecc75ccead5d93c347a82ebde5df15bf510;hp=438079447479773abab4b615894a0d69c9a216b4;hpb=88c5c68ffa277bf01b3254cf5a059e2cbe07be97;p=karo-tx-uboot.git diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 4380794474..ad38cbf6e1 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1,24 +1,13 @@ /* - * (C) Copyright 2001 - * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. + * (C) Copyright 2009 + * Sergey Kubushyn, himself, ksi@koi8.net * - * See file CREDITS for list of people who contributed to this - * project. + * Changes for unified multibus/multiadapter I2C support. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * (C) Copyright 2001 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -77,23 +66,29 @@ */ #include +#include +#include #include +#include #include #include +#include #include #include #include #include +DECLARE_GLOBAL_DATA_PTR; + /* Display values from last command. * Memory modify remembered values are different from display memory. */ -static uchar i2c_dp_last_chip; +static uint i2c_dp_last_chip; static uint i2c_dp_last_addr; static uint i2c_dp_last_alen; static uint i2c_dp_last_length = 0x10; -static uchar i2c_mm_last_chip; +static uint i2c_mm_last_chip; static uint i2c_mm_last_addr; static uint i2c_mm_last_alen; @@ -103,7 +98,7 @@ static uint i2c_mm_last_alen; * pairs. The following macros take care of this */ #if defined(CONFIG_SYS_I2C_NOPROBES) -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) static struct { uchar bus; @@ -119,20 +114,64 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; #define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ #define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) #define NO_PROBE_ADDR(i) i2c_no_probes[(i)] -#endif /* CONFIG_MULTI_BUS */ +#endif /* defined(CONFIG_SYS_I2C) */ +#endif -#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0])) +#define DISP_LINE_LEN 16 + +/* + * Default for driver model is to use the chip's existing address length. + * For legacy code, this is not stored, so we need to use a suitable + * default. + */ +#ifdef CONFIG_DM_I2C +#define DEFAULT_ADDR_LEN (-1) +#else +#define DEFAULT_ADDR_LEN 1 #endif -#if defined(CONFIG_I2C_MUX) -static I2C_MUX_DEVICE *i2c_mux_devices = NULL; -static int i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS; +#ifdef CONFIG_DM_I2C +static struct udevice *i2c_cur_bus; -DECLARE_GLOBAL_DATA_PTR; +static int cmd_i2c_set_bus_num(unsigned int busnum) +{ + struct udevice *bus; + int ret; -#endif + ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus); + if (ret) { + debug("%s: No bus %d\n", __func__, busnum); + return ret; + } + i2c_cur_bus = bus; -#define DISP_LINE_LEN 16 + return 0; +} + +static int i2c_get_cur_bus(struct udevice **busp) +{ + if (!i2c_cur_bus) { + puts("No I2C bus selected\n"); + return -ENODEV; + } + *busp = i2c_cur_bus; + + return 0; +} + +static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp) +{ + struct udevice *bus; + int ret; + + ret = i2c_get_cur_bus(&bus); + if (ret) + return ret; + + return i2c_get_chip(bus, chip_addr, 1, devp); +} + +#endif /** * i2c_init_board() - Board-specific I2C bus init @@ -144,7 +183,6 @@ DECLARE_GLOBAL_DATA_PTR; __weak void i2c_init_board(void) { - return; } /* TODO: Implement architecture-specific get/set functions */ @@ -161,6 +199,11 @@ void i2c_init_board(void) * * Returns I2C bus speed in Hz. */ +#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C) +/* + * TODO: Implement architecture-specific get/set functions + * Should go away, if we switched completely to new multibus support + */ __weak unsigned int i2c_get_bus_speed(void) { @@ -188,18 +231,19 @@ int i2c_set_bus_speed(unsigned int speed) return 0; } +#endif /** * get_alen() - Small parser helper function to get address length * * Returns the address length. */ -static uint get_alen(char *arg) +static uint get_alen(char *arg, int default_len) { int j; int alen; - alen = 1; + alen = default_len; for (j = 0; j < 8; j++) { if (arg[j] == '.') { alen = arg[j+1] - '0'; @@ -210,6 +254,19 @@ static uint get_alen(char *arg) return alen; } +enum i2c_err_op { + I2C_ERR_READ, + I2C_ERR_WRITE, +}; + +static int i2c_report_err(int ret, enum i2c_err_op op) +{ + printf("Error %s the chip: %d\n", + op == I2C_ERR_READ ? "reading" : "writing", ret); + + return CMD_RET_FAILURE; +} + /** * do_i2c_read() - Handle the "i2c read" command-line command * @cmdtp: Command data struct pointer @@ -225,9 +282,14 @@ static uint get_alen(char *arg) */ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; - uint devaddr, alen, length; + uint chip; + uint devaddr, length; + int alen; u_char *memaddr; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif if (argc != 5) return CMD_RET_USAGE; @@ -242,7 +304,7 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv * 2 bytes long. Some day it might be 3 bytes long :-). */ devaddr = simple_strtoul(argv[2], NULL, 16); - alen = get_alen(argv[2]); + alen = get_alen(argv[2], DEFAULT_ADDR_LEN); if (alen > 3) return CMD_RET_USAGE; @@ -256,20 +318,34 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv */ memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16); - if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) { - puts ("Error reading the chip.\n"); - return 1; - } +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (!ret) + ret = dm_i2c_read(dev, devaddr, memaddr, length); +#else + ret = i2c_read(chip, devaddr, alen, memaddr, length); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); + return 0; } static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; - uint devaddr, alen, length; + uint chip; + uint devaddr, length; + int alen; u_char *memaddr; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; + struct dm_i2c_chip *i2c_chip; +#endif - if (argc != 5) + if ((argc < 5) || (argc > 6)) return cmd_usage(cmdtp); /* @@ -287,30 +363,98 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ * 2 bytes long. Some day it might be 3 bytes long :-). */ devaddr = simple_strtoul(argv[3], NULL, 16); - alen = get_alen(argv[3]); + alen = get_alen(argv[3], DEFAULT_ADDR_LEN); if (alen > 3) return cmd_usage(cmdtp); /* - * Length is the number of objects, not number of bytes. + * Length is the number of bytes. */ length = simple_strtoul(argv[4], NULL, 16); - while (length-- > 0) { - if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) { - puts("Error writing to the chip.\n"); - return 1; - } +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); + i2c_chip = dev_get_parent_platdata(dev); + if (!i2c_chip) + return i2c_report_err(ret, I2C_ERR_WRITE); +#endif + + if (argc == 6 && !strcmp(argv[5], "-s")) { + /* + * Write all bytes in a single I2C transaction. If the target + * device is an EEPROM, it is your responsibility to not cross + * a page boundary. No write delay upon completion, take this + * into account if linking commands. + */ +#ifdef CONFIG_DM_I2C + i2c_chip->flags &= ~DM_I2C_CHIP_WR_ADDRESS; + ret = dm_i2c_write(dev, devaddr, memaddr, length); +#else + ret = i2c_write(chip, devaddr, alen, memaddr, length); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); + } else { + /* + * Repeated addressing - perform separate + * write transactions of one byte each + */ + while (length-- > 0) { +#ifdef CONFIG_DM_I2C + i2c_chip->flags |= DM_I2C_CHIP_WR_ADDRESS; + ret = dm_i2c_write(dev, devaddr++, memaddr++, 1); +#else + ret = i2c_write(chip, devaddr++, alen, memaddr++, 1); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); /* * No write delay with FRAM devices. */ #if !defined(CONFIG_SYS_I2C_FRAM) - udelay(11000); + udelay(11000); #endif + } } return 0; } +#ifdef CONFIG_DM_I2C +static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + struct udevice *dev; + uint flags; + int chip; + int ret; + + if (argc < 2) + return CMD_RET_USAGE; + + chip = simple_strtoul(argv[1], NULL, 16); + ret = i2c_get_cur_bus_chip(chip, &dev); + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); + + if (argc > 2) { + flags = simple_strtoul(argv[2], NULL, 16); + ret = i2c_set_chip_flags(dev, flags); + } else { + ret = i2c_get_chip_flags(dev, &flags); + if (!ret) + printf("%x\n", flags); + } + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); + + return 0; +} +#endif + /** * do_i2c_md() - Handle the "i2c md" command-line command * @cmdtp: Command data struct pointer @@ -326,9 +470,14 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ */ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; - uint addr, alen, length; + uint chip; + uint addr, length; + int alen; int j, nbytes, linebytes; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif /* We use the last specified parameters, unless new ones are * entered. @@ -356,7 +505,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] * 2 bytes long. Some day it might be 3 bytes long :-). */ addr = simple_strtoul(argv[2], NULL, 16); - alen = get_alen(argv[2]); + alen = get_alen(argv[2], DEFAULT_ADDR_LEN); if (alen > 3) return CMD_RET_USAGE; @@ -368,6 +517,14 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] length = simple_strtoul(argv[3], NULL, 16); } +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); +#endif + /* * Print the lines. * @@ -381,8 +538,13 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; - if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0) - puts ("Error reading the chip.\n"); +#ifdef CONFIG_DM_I2C + ret = dm_i2c_read(dev, addr, linebuf, linebytes); +#else + ret = i2c_read(chip, addr, alen, linebuf, linebytes); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); else { printf("%04x:", addr); cp = linebuf; @@ -427,11 +589,15 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - uchar chip; + uint chip; ulong addr; - uint alen; + int alen; uchar byte; int count; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif if ((argc < 4) || (argc > 5)) return CMD_RET_USAGE; @@ -445,10 +611,17 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] * Address is always specified. */ addr = simple_strtoul(argv[2], NULL, 16); - alen = get_alen(argv[2]); + alen = get_alen(argv[2], DEFAULT_ADDR_LEN); if (alen > 3) return CMD_RET_USAGE; +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); +#endif /* * Value to write is always specified. */ @@ -463,8 +636,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] count = 1; while (count-- > 0) { - if (i2c_write(chip, addr++, alen, &byte, 1) != 0) - puts ("Error writing the chip.\n"); +#ifdef CONFIG_DM_I2C + ret = dm_i2c_write(dev, addr++, &byte, 1); +#else + ret = i2c_write(chip, addr++, alen, &byte, 1); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); /* * Wait for the write to complete. The write can take * up to 10mSec (we allow a little more time). @@ -497,13 +675,17 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - uchar chip; + uint chip; ulong addr; - uint alen; + int alen; int count; uchar byte; ulong crc; ulong err; + int ret = 0; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif if (argc < 4) return CMD_RET_USAGE; @@ -517,10 +699,17 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] * Address is always specified. */ addr = simple_strtoul(argv[2], NULL, 16); - alen = get_alen(argv[2]); + alen = get_alen(argv[2], DEFAULT_ADDR_LEN); if (alen > 3) return CMD_RET_USAGE; +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); +#endif /* * Count is always specified */ @@ -534,13 +723,18 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] crc = 0; err = 0; while (count-- > 0) { - if (i2c_read(chip, addr, alen, &byte, 1) != 0) +#ifdef CONFIG_DM_I2C + ret = dm_i2c_read(dev, addr, &byte, 1); +#else + ret = i2c_read(chip, addr, alen, &byte, 1); +#endif + if (ret) err++; crc = crc32 (crc, &byte, 1); addr++; } if (err > 0) - puts ("Error reading the chip,\n"); + i2c_report_err(ret, I2C_ERR_READ); else printf ("%08lx\n", crc); @@ -566,19 +760,21 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] static int mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) { - uchar chip; + uint chip; ulong addr; - uint alen; + int alen; ulong data; int size = 1; int nbytes; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif if (argc != 3) return CMD_RET_USAGE; -#ifdef CONFIG_BOOT_RETRY_TIME - reset_cmd_timeout(); /* got a good command to get here */ -#endif + bootretry_reset_cmd_timeout(); /* got a good command to get here */ /* * We use the last specified parameters, unless new ones are * entered. @@ -603,30 +799,42 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg * Address is always specified. */ addr = simple_strtoul(argv[2], NULL, 16); - alen = get_alen(argv[2]); + alen = get_alen(argv[2], DEFAULT_ADDR_LEN); if (alen > 3) return CMD_RET_USAGE; } +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); +#endif + /* * Print the address, followed by value. Then accept input for * the next value. A non-converted value exits. */ do { printf("%08lx:", addr); - if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0) - puts ("\nError reading the chip,\n"); - else { - data = cpu_to_be32(data); - if (size == 1) - printf(" %02lx", (data >> 24) & 0x000000FF); - else if (size == 2) - printf(" %04lx", (data >> 16) & 0x0000FFFF); - else - printf(" %08lx", data); - } +#ifdef CONFIG_DM_I2C + ret = dm_i2c_read(dev, addr, (uchar *)&data, size); +#else + ret = i2c_read(chip, addr, alen, (uchar *)&data, size); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); + + data = cpu_to_be32(data); + if (size == 1) + printf(" %02lx", (data >> 24) & 0x000000FF); + else if (size == 2) + printf(" %04lx", (data >> 16) & 0x0000FFFF); + else + printf(" %08lx", data); - nbytes = readline (" ? "); + nbytes = cli_readline(" ? "); if (nbytes == 0) { /* * pressed as only input, don't modify current @@ -635,9 +843,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg if (incrflag) addr += size; nbytes = size; -#ifdef CONFIG_BOOT_RETRY_TIME - reset_cmd_timeout(); /* good enough to not time out */ -#endif + /* good enough to not time out */ + bootretry_reset_cmd_timeout(); } #ifdef CONFIG_BOOT_RETRY_TIME else if (nbytes == -2) @@ -654,14 +861,20 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg data = be32_to_cpu(data); nbytes = endp - console_buffer; if (nbytes) { -#ifdef CONFIG_BOOT_RETRY_TIME /* * good enough to not time out */ - reset_cmd_timeout(); + bootretry_reset_cmd_timeout(); +#ifdef CONFIG_DM_I2C + ret = dm_i2c_write(dev, addr, (uchar *)&data, + size); +#else + ret = i2c_write(chip, addr, alen, + (uchar *)&data, size); #endif - if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0) - puts ("Error writing the chip.\n"); + if (ret) + return i2c_report_err(ret, + I2C_ERR_WRITE); #ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); #endif @@ -700,8 +913,15 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv int found = 0; #if defined(CONFIG_SYS_I2C_NOPROBES) int k, skip; - uchar bus = GET_BUS_NUM; + unsigned int bus = GET_BUS_NUM; #endif /* NOPROBES */ + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *bus, *dev; + + if (i2c_get_cur_bus(&bus)) + return CMD_RET_FAILURE; +#endif if (argc == 2) addr = simple_strtol(argv[1], 0, 16); @@ -713,7 +933,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv #if defined(CONFIG_SYS_I2C_NOPROBES) skip = 0; - for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { + for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) { if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) { skip = 1; break; @@ -722,7 +942,12 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv if (skip) continue; #endif - if (i2c_probe(j) == 0) { +#ifdef CONFIG_DM_I2C + ret = dm_i2c_probe(bus, j, 0, &dev); +#else + ret = i2c_probe(j); +#endif + if (ret == 0) { printf(" %02X", j); found++; } @@ -731,7 +956,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv #if defined(CONFIG_SYS_I2C_NOPROBES) puts ("Excluded chip addresses:"); - for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { + for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) { if (COMPARE_BUS(bus,k)) printf(" %02X", NO_PROBE_ADDR(k)); } @@ -758,12 +983,16 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv */ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; - ulong alen; + uint chip; + int alen; uint addr; uint length; u_char bytes[16]; int delay; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif if (argc < 3) return CMD_RET_USAGE; @@ -777,9 +1006,16 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] * Address is always specified. */ addr = simple_strtoul(argv[2], NULL, 16); - alen = get_alen(argv[2]); + alen = get_alen(argv[2], DEFAULT_ADDR_LEN); if (alen > 3) return CMD_RET_USAGE; +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret && alen != -1) + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) + return i2c_report_err(ret, I2C_ERR_WRITE); +#endif /* * Length is the number of objects, not number of bytes. @@ -799,8 +1035,13 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] * Run the loop... */ while (1) { - if (i2c_read(chip, addr, alen, bytes, length) != 0) - puts ("Error reading the chip.\n"); +#ifdef CONFIG_DM_I2C + ret = dm_i2c_read(dev, addr, bytes, length); +#else + ret = i2c_read(chip, addr, alen, bytes, length); +#endif + if (ret) + i2c_report_err(ret, I2C_ERR_READ); udelay(delay); } @@ -870,7 +1111,7 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { enum { unknown, EDO, SDRAM, DDR2 } type; - u_char chip; + uint chip; u_char data[128]; u_char cksum; int j; @@ -1348,8 +1589,12 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_I2C_EDID) int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { - u_char chip; + uint chip; struct edid1_info edid; + int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; +#endif if (argc < 2) { cmd_usage(cmdtp); @@ -1357,10 +1602,15 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } chip = simple_strtoul(argv[1], NULL, 16); - if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) { - puts("Error reading EDID content.\n"); - return 1; - } +#ifdef CONFIG_DM_I2C + ret = i2c_get_cur_bus_chip(chip, &dev); + if (!ret) + ret = dm_i2c_read(dev, 0, (uchar *)&edid, sizeof(edid)); +#else + ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)); +#endif + if (ret) + return i2c_report_err(ret, I2C_ERR_READ); if (edid_check_info(&edid)) { puts("Content isn't valid EDID.\n"); @@ -1373,9 +1623,8 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } #endif /* CONFIG_I2C_EDID */ -#if defined(CONFIG_I2C_MUX) /** - * do_i2c_add_bus() - Handle the "i2c bus" command-line command + * do_i2c_show_bus() - Handle the "i2c bus" command-line command * @cmdtp: Command data struct pointer * @flag: Command flag * @argc: Command-line argument count @@ -1383,35 +1632,56 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) * * Returns zero always. */ -static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +#if defined(CONFIG_SYS_I2C) +static int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { - int ret=0; + int i; +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + int j; +#endif if (argc == 1) { /* show all busses */ - I2C_MUX *mux; - I2C_MUX_DEVICE *device = i2c_mux_devices; - - printf ("Busses reached over muxes:\n"); - while (device != NULL) { - printf ("Bus ID: %x\n", device->busid); - printf (" reached over Mux(es):\n"); - mux = device->mux; - while (mux != NULL) { - printf (" %s@%x ch: %x\n", mux->name, mux->chip, mux->channel); - mux = mux->next; + for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSES; i++) { + printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + if (i2c_bus[i].next_hop[j].chip == 0) + break; + printf("->%s@0x%2x:%d", + i2c_bus[i].next_hop[j].mux.name, + i2c_bus[i].next_hop[j].chip, + i2c_bus[i].next_hop[j].channel); } - device = device->next; +#endif + printf("\n"); } } else { - (void)i2c_mux_ident_muxstring ((uchar *)argv[1]); - ret = 0; + /* show specific bus */ + i = simple_strtoul(argv[1], NULL, 10); + if (i >= CONFIG_SYS_NUM_I2C_BUSES) { + printf("Invalid bus %d\n", i); + return -1; + } + printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); +#ifndef CONFIG_SYS_I2C_DIRECT_BUS + for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + if (i2c_bus[i].next_hop[j].chip == 0) + break; + printf("->%s@0x%2x:%d", + i2c_bus[i].next_hop[j].mux.name, + i2c_bus[i].next_hop[j].chip, + i2c_bus[i].next_hop[j].channel); + } +#endif + printf("\n"); } - return ret; + + return 0; } -#endif /* CONFIG_I2C_MUX */ +#endif -#if defined(CONFIG_I2C_MULTI_BUS) /** * do_i2c_bus_num() - Handle the "i2c dev" command-line command * @cmdtp: Command data struct pointer @@ -1422,23 +1692,47 @@ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar * Returns zero on success, CMD_RET_USAGE in case of misuse and negative * on error. */ -static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \ + defined(CONFIG_DM_I2C) +static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { - int bus_idx, ret=0; + int ret = 0; + int bus_no; - if (argc == 1) + if (argc == 1) { /* querying current setting */ - printf("Current bus is %d\n", i2c_get_bus_num()); - else { - bus_idx = simple_strtoul(argv[1], NULL, 10); - printf("Setting bus to %d\n", bus_idx); - ret = i2c_set_bus_num(bus_idx); +#ifdef CONFIG_DM_I2C + struct udevice *bus; + + if (!i2c_get_cur_bus(&bus)) + bus_no = bus->seq; + else + bus_no = -1; +#else + bus_no = i2c_get_bus_num(); +#endif + printf("Current bus is %d\n", bus_no); + } else { + bus_no = simple_strtoul(argv[1], NULL, 10); +#if defined(CONFIG_SYS_I2C) + if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) { + printf("Invalid bus %d\n", bus_no); + return -1; + } +#endif + printf("Setting bus to %d\n", bus_no); +#ifdef CONFIG_DM_I2C + ret = cmd_i2c_set_bus_num(bus_no); +#else + ret = i2c_set_bus_num(bus_no); +#endif if (ret) printf("Failure changing bus number (%d)\n", ret); } return ret; } -#endif /* CONFIG_I2C_MULTI_BUS */ +#endif /* defined(CONFIG_SYS_I2C) */ /** * do_i2c_bus_speed() - Handle the "i2c speed" command-line command @@ -1454,13 +1748,28 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const { int speed, ret=0; - if (argc == 1) +#ifdef CONFIG_DM_I2C + struct udevice *bus; + + if (i2c_get_cur_bus(&bus)) + return 1; +#endif + if (argc == 1) { +#ifdef CONFIG_DM_I2C + speed = dm_i2c_get_bus_speed(bus); +#else + speed = i2c_get_bus_speed(); +#endif /* querying current speed */ - printf("Current bus speed=%d\n", i2c_get_bus_speed()); - else { + printf("Current bus speed=%d\n", speed); + } else { speed = simple_strtoul(argv[1], NULL, 10); printf("Setting bus speed to %d Hz\n", speed); +#ifdef CONFIG_DM_I2C + ret = dm_i2c_set_bus_speed(bus, speed); +#else ret = i2c_set_bus_speed(speed); +#endif if (ret) printf("Failure changing bus speed (%d)\n", ret); } @@ -1508,16 +1817,30 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) */ static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { +#if defined(CONFIG_DM_I2C) + struct udevice *bus; + + if (i2c_get_cur_bus(&bus)) + return CMD_RET_FAILURE; + if (i2c_deblock(bus)) { + printf("Error: Not supported by the driver\n"); + return CMD_RET_FAILURE; + } +#elif defined(CONFIG_SYS_I2C) + i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr); +#else i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif return 0; } static cmd_tbl_t cmd_i2c_sub[] = { -#if defined(CONFIG_I2C_MUX) - U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""), -#endif /* CONFIG_I2C_MUX */ +#if defined(CONFIG_SYS_I2C) + U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""), +#endif U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""), -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || \ + defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C) U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), #endif /* CONFIG_I2C_MULTI_BUS */ #if defined(CONFIG_I2C_EDID) @@ -1530,7 +1853,10 @@ static cmd_tbl_t cmd_i2c_sub[] = { U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""), U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""), U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""), - U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""), + U_BOOT_CMD_MKENT(write, 6, 0, do_i2c_write, "", ""), +#ifdef CONFIG_DM_I2C + U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""), +#endif U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""), #if defined(CONFIG_CMD_SDRAM) U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""), @@ -1576,11 +1902,12 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /***************************************************/ #ifdef CONFIG_SYS_LONGHELP static char i2c_help_text[] = -#if defined(CONFIG_I2C_MUX) - "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c " -#endif /* CONFIG_I2C_MUX */ +#if defined(CONFIG_SYS_I2C) + "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n" +#endif "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" -#if defined(CONFIG_I2C_MULTI_BUS) +#if defined(CONFIG_SYS_I2C) || \ + defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C) "i2c dev [dev] - show or set current I2C bus\n" #endif /* CONFIG_I2C_MULTI_BUS */ #if defined(CONFIG_I2C_EDID) @@ -1592,8 +1919,12 @@ static char i2c_help_text[] = "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" "i2c probe [address] - test for and show device(s) on the I2C bus\n" - "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n" - "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n" + "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n" + "i2c write memaddress chip address[.0, .1, .2] length [-s] - write memory\n" + " to I2C; the -s option selects bulk write in a single transaction\n" +#ifdef CONFIG_DM_I2C + "i2c flags chip [flags] - set or get chip flags\n" +#endif "i2c reset - re-init the I2C Controller\n" #if defined(CONFIG_CMD_SDRAM) "i2c sdram chip - print SDRAM configuration information\n" @@ -1602,229 +1933,7 @@ static char i2c_help_text[] = #endif U_BOOT_CMD( - i2c, 6, 1, do_i2c, + i2c, 7, 1, do_i2c, "I2C sub-system", i2c_help_text ); - -#if defined(CONFIG_I2C_MUX) -static int i2c_mux_add_device(I2C_MUX_DEVICE *dev) -{ - I2C_MUX_DEVICE *devtmp = i2c_mux_devices; - - if (i2c_mux_devices == NULL) { - i2c_mux_devices = dev; - return 0; - } - while (devtmp->next != NULL) - devtmp = devtmp->next; - - devtmp->next = dev; - return 0; -} - -I2C_MUX_DEVICE *i2c_mux_search_device(int id) -{ - I2C_MUX_DEVICE *device = i2c_mux_devices; - - while (device != NULL) { - if (device->busid == id) - return device; - device = device->next; - } - return NULL; -} - -/* searches in the buf from *pos the next ':'. - * returns: - * 0 if found (with *pos = where) - * < 0 if an error occured - * > 0 if the end of buf is reached - */ -static int i2c_mux_search_next (int *pos, uchar *buf, int len) -{ - while ((buf[*pos] != ':') && (*pos < len)) { - *pos += 1; - } - if (*pos >= len) - return 1; - if (buf[*pos] != ':') - return -1; - return 0; -} - -static int i2c_mux_get_busid (void) -{ - int tmp = i2c_mux_busid; - - i2c_mux_busid ++; - return tmp; -} - -/* Analyses a Muxstring and immediately sends the - commands to the muxes. Runs from flash. - */ -int i2c_mux_ident_muxstring_f (uchar *buf) -{ - int pos = 0; - int oldpos; - int ret = 0; - int len = strlen((char *)buf); - int chip; - uchar channel; - int was = 0; - - while (ret == 0) { - oldpos = pos; - /* search name */ - ret = i2c_mux_search_next(&pos, buf, len); - if (ret != 0) - printf ("ERROR\n"); - /* search address */ - pos ++; - oldpos = pos; - ret = i2c_mux_search_next(&pos, buf, len); - if (ret != 0) - printf ("ERROR\n"); - buf[pos] = 0; - chip = simple_strtoul((char *)&buf[oldpos], NULL, 16); - buf[pos] = ':'; - /* search channel */ - pos ++; - oldpos = pos; - ret = i2c_mux_search_next(&pos, buf, len); - if (ret < 0) - printf ("ERROR\n"); - was = 0; - if (buf[pos] != 0) { - buf[pos] = 0; - was = 1; - } - channel = simple_strtoul((char *)&buf[oldpos], NULL, 16); - if (was) - buf[pos] = ':'; - if (i2c_write(chip, 0, 0, &channel, 1) != 0) { - printf ("Error setting Mux: chip:%x channel: \ - %x\n", chip, channel); - return -1; - } - pos ++; - oldpos = pos; - - } - i2c_init_board(); - - return 0; -} - -/* Analyses a Muxstring and if this String is correct - * adds a new I2C Bus. - */ -I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf) -{ - I2C_MUX_DEVICE *device; - I2C_MUX *mux; - int pos = 0; - int oldpos; - int ret = 0; - int len = strlen((char *)buf); - int was = 0; - - device = (I2C_MUX_DEVICE *)malloc (sizeof(I2C_MUX_DEVICE)); - device->mux = NULL; - device->busid = i2c_mux_get_busid (); - device->next = NULL; - while (ret == 0) { - mux = (I2C_MUX *)malloc (sizeof(I2C_MUX)); - mux->next = NULL; - /* search name of mux */ - oldpos = pos; - ret = i2c_mux_search_next(&pos, buf, len); - if (ret != 0) - printf ("%s no name.\n", __FUNCTION__); - mux->name = (char *)malloc (pos - oldpos + 1); - memcpy (mux->name, &buf[oldpos], pos - oldpos); - mux->name[pos - oldpos] = 0; - /* search address */ - pos ++; - oldpos = pos; - ret = i2c_mux_search_next(&pos, buf, len); - if (ret != 0) - printf ("%s no mux address.\n", __FUNCTION__); - buf[pos] = 0; - mux->chip = simple_strtoul((char *)&buf[oldpos], NULL, 16); - buf[pos] = ':'; - /* search channel */ - pos ++; - oldpos = pos; - ret = i2c_mux_search_next(&pos, buf, len); - if (ret < 0) - printf ("%s no mux channel.\n", __FUNCTION__); - was = 0; - if (buf[pos] != 0) { - buf[pos] = 0; - was = 1; - } - mux->channel = simple_strtoul((char *)&buf[oldpos], NULL, 16); - if (was) - buf[pos] = ':'; - if (device->mux == NULL) - device->mux = mux; - else { - I2C_MUX *muxtmp = device->mux; - while (muxtmp->next != NULL) { - muxtmp = muxtmp->next; - } - muxtmp->next = mux; - } - pos ++; - oldpos = pos; - } - if (ret > 0) { - /* Add Device */ - i2c_mux_add_device (device); - return device; - } - - return NULL; -} - -int i2x_mux_select_mux(int bus) -{ - I2C_MUX_DEVICE *dev; - I2C_MUX *mux; - - if ((gd->flags & GD_FLG_RELOC) != GD_FLG_RELOC) { - /* select Default Mux Bus */ -#if defined(CONFIG_SYS_I2C_IVM_BUS) - i2c_mux_ident_muxstring_f ((uchar *)CONFIG_SYS_I2C_IVM_BUS); -#else - { - unsigned char *buf; - buf = (unsigned char *) getenv("EEprom_ivm"); - if (buf != NULL) - i2c_mux_ident_muxstring_f (buf); - } -#endif - return 0; - } - dev = i2c_mux_search_device(bus); - if (dev == NULL) - return -1; - - mux = dev->mux; - while (mux != NULL) { - /* do deblocking on each level of mux, before mux config */ - i2c_init_board(); - if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) { - printf ("Error setting Mux: chip:%x channel: \ - %x\n", mux->chip, mux->channel); - return -1; - } - mux = mux->next; - } - /* do deblocking on each level of mux and after mux config */ - i2c_init_board(); - return 0; -} -#endif /* CONFIG_I2C_MUX */