X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=doc%2FREADME.mpc8360emds;h=6afa753969015f2d2e8a908e40e5f04ca5118e66;hb=30f392b827e14acf2afef4d18c491b8aaed53011;hp=5f202475b586b52c98bdd8f943213246af3451c0;hpb=f930922f061ea7bf585296859d1c14194c24b840;p=karo-tx-uboot.git

diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
index 5f202475b5..6afa753969 100644
--- a/doc/README.mpc8360emds
+++ b/doc/README.mpc8360emds
@@ -1,7 +1,7 @@
 Freescale MPC8360EMDS Board
 -----------------------------------------
 1.	Board Switches and Jumpers
-1.0 	There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
+1.0	There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
 	For some reason, the HW designers describe the switch settings
 	in terms of 0 and 1, and then map that to physical switches where
 	the label "On" refers to logic 0 and "Off" is logic 1.
@@ -15,7 +15,7 @@ Freescale MPC8360EMDS Board
 		"On"  == 0
 
 	SW18 is switch 18 as silk-screened onto the board.
-	SW4[8] is the bit labled 8 on Switch 4.
+	SW4[8] is the bit labeled 8 on Switch 4.
 	SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
 	SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
 	SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
@@ -81,34 +81,42 @@ Freescale MPC8360EMDS Board
 
 	include/configs/MPC8360EMDS.h
 
-    CONFIG_MPC83XX	    MPC83xx family for both MPC8349 and MPC8360
+    CONFIG_MPC83xx	    MPC83xx family for both MPC8349 and MPC8360
     CONFIG_MPC8360	    MPC8360 specific
     CONFIG_MPC8360EMDS	    MPC8360EMDS board specific
 
 4. Compilation
 
+	MPC8360EMDS shipped with 33.33MHz or 66MHz oscillator(check U41 chip).
+
 	Assuming you're using BASH shell:
 
 		export CROSS_COMPILE=your-cross-compile-prefix
 		cd u-boot
 		make distclean
-		make MPC8360EMDS_config
+		make MPC8360EMDS_XX_config
 		make
 
-	MPC8360 support PCI in host and slave mode.
+	MPC8360EMDS support ATM, PCI in host and slave mode.
+
+	To make u-boot support ATM :
+	1) Make MPC8360EMDS_XX_ATM_config
 
 	To make u-boot support PCI host 66M :
 	1) DIP SW support PCI mode as described in Section 1.1.
-	2) Make MPC8360EMDS_HOST_66_config
+	2) Make MPC8360EMDS_XX_HOST_66_config
 
 	To make u-boot support PCI host 33M :
 	1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
-	2) Make MPC8360EMDS_HOST_33_config
+	2) Make MPC8360EMDS_XX_HOST_33_config
 
 	To make u-boot support PCI slave 66M :
 	1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
-	2) Make MPC8360EMDS_SLAVE_config
+	2) Make MPC8360EMDS_XX_SLAVE_config
 
+	(where XX is:
+	   33 - 33.33MHz oscillator
+	   66 - 66MHz oscillator)
 
 5. Downloading and Flashing Images