X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=doc%2FREADME.mxsimage;h=0d31cba1fb5a3ed7b6d0a12000bb2bc9e0d9e4ab;hb=f9aa6a1086f6b7da1814a2c95feefa91c9c4b593;hp=88a2caf3e62ab8bb7600ee6f1176d9bcec230a8a;hpb=985a71d15b8bd9cfbeae1ac1b08a5319abfd246c;p=karo-tx-uboot.git

diff --git a/doc/README.mxsimage b/doc/README.mxsimage
index 88a2caf3e6..0d31cba1fb 100644
--- a/doc/README.mxsimage
+++ b/doc/README.mxsimage
@@ -10,7 +10,7 @@ The mxsimage tool is targeted to be a simple replacement for the elftosb2 .
 To generate an image, write an image configuration file and run:
 
  mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
-         <output bootstream file>
+	 <output bootstream file>
 
 The output bootstream file is usually using the .sb file extension. Note
 that the example configuration files for producing bootable BootStream with
@@ -54,33 +54,33 @@ These semantics and rules will be outlined now.
 
       LOAD     u32_address string_filename
       - Instructs the BootROM to load file pointed by "string_filename" onto
-        address "u32_address".
+	address "u32_address".
 
       LOAD IVT u32_address u32_IVT_entry_point
       - Crafts and loads IVT onto address "u32_address" with the entry point
-        of u32_IVT_entry_point.
+	of u32_IVT_entry_point.
       - i.MX28-specific instruction!
 
       LOAD DCD u32_address u32_DCD_block_ID
       - Loads the DCD block with ID "u32_DCD_block_ID" onto address
-        "u32_address" and executes the contents of this DCD block
+	"u32_address" and executes the contents of this DCD block
       - i.MX28-specific instruction!
 
       FILL u32_address u32_pattern u32_length
       - Starts to write memory from addres "u32_address" with a pattern
-        specified by "u32_pattern". Writes exactly "u32_length" bytes of the
+	specified by "u32_pattern". Writes exactly "u32_length" bytes of the
 	pattern.
 
       JUMP [HAB] u32_address [u32_r0_arg]
       - Jumps onto memory address specified by "u32_address" by setting this
-        address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
+	address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
 	register "r0" to the executed code if this option is specified.
 	Otherwise, ARM register "r0" will default to value 0x00000000. The
 	optional "HAB" flag is i.MX28-specific flag turning on the HAB boot.
 
       CALL [HAB] u32_address [u32_r0_arg]
       - See JUMP instruction above, as the operation is exactly the same with
-        one difference. The CALL instruction does allow returning into the
+	one difference. The CALL instruction does allow returning into the
 	BootROM from the executed code. U-Boot makes use of this in it's SPL
 	code.
 
@@ -88,10 +88,10 @@ These semantics and rules will be outlined now.
       - Restart the CPU and start booting from device specified by the
 	"string_mode" argument. The "string_mode" differs for each CPU
 	and can be:
-         i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
-                               JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
-         i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
-                               JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
+	 i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
+			       JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
+	 i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
+			       JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
 
   - An optional "DCD" blocks can be added at the begining of the configuration
     file. Note that the DCD is only supported on i.MX28.
@@ -99,7 +99,7 @@ These semantics and rules will be outlined now.
       configuration file.
     - The DCD block has the following semantics:
 
-        DCD u32_DCD_block_ID
+	DCD u32_DCD_block_ID
 	- u32_DCD_block_ID	:: The ID number of the DCD block, must match
 				   the ID number used by "LOAD DCD" instruction.