X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FSPD823TS.h;h=64596b35c18a174c280d801664d7691debb98a53;hb=8f8b36e84c427318b8c2e8996b65c9675abf1810;hp=92013469970673ad7b0c805eb22eeb8b324c3258;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=karo-tx-uboot.git

diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 9201346997..64596b35c1 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+ 
  */
 
 /*
@@ -36,6 +20,10 @@
 #define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
 #define CONFIG_SPD823TS		1	/* ...on a SPD823TS board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFF000000
+
+#define CONFIG_RESET_PHY_R	1	/* Call reset_phy()		*/
+
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -67,6 +55,7 @@
 
 #define CONFIG_CMD_IDE
 
+#undef CONFIG_CMD_SAVEENV
 #undef CONFIG_CMD_FLASH
 
 
@@ -116,8 +105,6 @@
 
 #define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -132,9 +119,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -301,6 +287,8 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_LED		1	/* LED   for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
@@ -414,12 +402,4 @@
 			 MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 |	\
 			 MBMR_RLFB_1X	 | MBMR_WLFB_1X	   | MBMR_TLFB_4X)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
 #endif	/* __CONFIG_H */