X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FTotal5200.h;h=a58eecab846ae3b130b3254bcd63ce695b95d25b;hb=2c3dc792b6df16970077c0d64085e29f1f85d4c8;hp=9edf79022dc8b00b952bb8a8e17eeee60e18ad2f;hpb=93f798346033a1f6d22090b47abad4be88243b04;p=karo-tx-uboot.git diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 9edf79022d..a58eecab84 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -5,23 +5,7 @@ * (C) Copyright 2004 * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -40,20 +24,29 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ #define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFFF00000 boot high (standard configuration) + * 0xFE000000 boot low + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 +#endif + +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * Serial console configuration */ #define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* * Video console @@ -71,7 +64,6 @@ #define CONFIG_SPLASH_SCREEN -#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -80,6 +72,7 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS @@ -89,18 +82,11 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 -#define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 #define CONFIG_EEPRO100 1 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else /* MGT5100 */ - -#define CONFIG_MII 1 - -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -124,9 +110,7 @@ */ #include -#if defined(CONFIG_MPC5200) - #define CONFIG_CMD_PCI -#endif +#define CONFIG_CMD_PCI #define CONFIG_CMD_BMP #define CONFIG_CMD_EEPROM @@ -137,8 +121,8 @@ #define CONFIG_CMD_USB -#if (TEXT_BASE == 0xFE000000) /* Boot low */ -# define CFG_LOWBOOT 1 +#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */ +# define CONFIG_SYS_LOWBOOT 1 #endif /* @@ -149,7 +133,7 @@ #define CONFIG_PREBOOT \ "setenv stdout serial;setenv stderr serial;" \ "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS @@ -173,98 +157,96 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ -#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif +#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * I2C configuration */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */ +#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */ -#define CFG_I2C_SPEED 100000 /* 100 kHz */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* * EEPROM configuration */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 /* * Flash configuration */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #if CONFIG_TOTAL5200_REV==2 -# define CFG_MAX_FLASH_BANKS 3 /* max num of flash banks */ -# define CFG_FLASH_BANKS_LIST { CFG_CS5_START, CFG_CS4_START, CFG_BOOTCS_START } +# define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */ +# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS5_START, CONFIG_SYS_CS4_START, CONFIG_SYS_BOOTCS_START } #else -# define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ -# define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } #endif -#define CFG_FLASH_EMPTY_INFO -#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ #if CONFIG_TOTAL5200_REV==1 -# define CFG_FLASH_BASE 0xFE000000 -# define CFG_FLASH_SIZE 0x02000000 +# define CONFIG_SYS_FLASH_BASE 0xFE000000 +# define CONFIG_SYS_FLASH_SIZE 0x02000000 #elif CONFIG_TOTAL5200_REV==2 -# define CFG_FLASH_BASE 0xFA000000 -# define CFG_FLASH_SIZE 0x06000000 +# define CONFIG_SYS_FLASH_BASE 0xFA000000 +# define CONFIG_SYS_FLASH_SIZE 0x06000000 #endif /* CONFIG_TOTAL5200_REV */ -#if defined(CFG_LOWBOOT) -# define CFG_ENV_ADDR 0xFE040000 -#else /* CFG_LOWBOOT */ -# define CFG_ENV_ADDR 0xFFF40000 -#endif /* CFG_LOWBOOT */ +#if defined(CONFIG_SYS_LOWBOOT) +# define CONFIG_ENV_ADDR 0xFE040000 +#else /* CONFIG_SYS_LOWBOOT */ +# define CONFIG_ENV_ADDR 0xFFF40000 +#endif /* CONFIG_SYS_LOWBOOT */ /* * Environment settings */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x40000 -#define CFG_ENV_SECT_SIZE 0x40000 +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x40000 #define CONFIG_ENV_OVERWRITE 1 /* * Memory map */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_DEFAULT_MBAR 0x80000000 -#define CFG_MBAR 0xF0000000 /* 64 kB */ -#define CFG_FPGA_BASE 0xF0010000 /* 64 kB */ -#define CFG_CPLD_BASE 0xF0020000 /* 64 kB */ -#define CFG_LCD_BASE 0xF1000000 /* 4096 kB */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +#define CONFIG_SYS_MBAR 0xF0000000 /* 64 kB */ +#define CONFIG_SYS_FPGA_BASE 0xF0010000 /* 64 kB */ +#define CONFIG_SYS_CPLD_BASE 0xF0020000 /* 64 kB */ +#define CONFIG_SYS_LCD_BASE 0xF1000000 /* 4096 kB */ /* Use SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM -#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Ethernet configuration */ #define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_SEVENWIRE /* dummy, 7-wire FEC does not have phy address */ #define CONFIG_PHY_ADDR 0x00 @@ -290,88 +272,76 @@ * PSC1: reset default, changed in AC'97 driver 000 * */ -#define CFG_GPS_PORT_CONFIG 0x00000C10 +#define CONFIG_SYS_GPS_PORT_CONFIG 0x00000C10 /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) -#define CFG_HID0_INIT HID0_ICE | HID0_ICFI -#define CFG_HID0_FINAL HID0_ICE -#else -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL 0 -#endif - -#if defined (CONFIG_MGT5100) -# define CONFIG_BOARD_EARLY_INIT_R /* switch from CS_BOOT to CS0 */ -#endif +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE #if CONFIG_TOTAL5200_REV==1 -# define CFG_BOOTCS_START CFG_FLASH_BASE -# define CFG_BOOTCS_SIZE 0x02000000 /* 32 MB */ -# define CFG_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -# define CFG_CS0_START CFG_FLASH_BASE -# define CFG_CS0_SIZE 0x02000000 /* 32 MB */ +# define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */ +# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ +# define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +# define CONFIG_SYS_CS0_SIZE 0x02000000 /* 32 MB */ #else -# define CFG_BOOTCS_START (CFG_CS4_START + CFG_CS4_SIZE) -# define CFG_BOOTCS_SIZE 0x02000000 /* 32 MB */ -# define CFG_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -# define CFG_CS4_START (CFG_CS5_START + CFG_CS5_SIZE) -# define CFG_CS4_SIZE 0x02000000 /* 32 MB */ -# define CFG_CS4_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -# define CFG_CS5_START CFG_FLASH_BASE -# define CFG_CS5_SIZE 0x02000000 /* 32 MB */ -# define CFG_CS5_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ +# define CONFIG_SYS_BOOTCS_START (CONFIG_SYS_CS4_START + CONFIG_SYS_CS4_SIZE) +# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */ +# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ +# define CONFIG_SYS_CS4_START (CONFIG_SYS_CS5_START + CONFIG_SYS_CS5_SIZE) +# define CONFIG_SYS_CS4_SIZE 0x02000000 /* 32 MB */ +# define CONFIG_SYS_CS4_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ +# define CONFIG_SYS_CS5_START CONFIG_SYS_FLASH_BASE +# define CONFIG_SYS_CS5_SIZE 0x02000000 /* 32 MB */ +# define CONFIG_SYS_CS5_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ #endif -#define CFG_CS1_START CFG_FPGA_BASE -#define CFG_CS1_SIZE 0x00010000 /* 64 kB */ -#define CFG_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */ +#define CONFIG_SYS_CS1_START CONFIG_SYS_FPGA_BASE +#define CONFIG_SYS_CS1_SIZE 0x00010000 /* 64 kB */ +#define CONFIG_SYS_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */ -#define CFG_CS2_START CFG_LCD_BASE -#define CFG_CS2_SIZE 0x00400000 /* 4096 kB */ -#define CFG_CS2_CFG 0x0032FD0C /* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */ +#define CONFIG_SYS_CS2_START CONFIG_SYS_LCD_BASE +#define CONFIG_SYS_CS2_SIZE 0x00400000 /* 4096 kB */ +#define CONFIG_SYS_CS2_CFG 0x0032FD0C /* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */ #if CONFIG_TOTAL5200_REV==1 -# define CFG_CS3_START CFG_CPLD_BASE -# define CFG_CS3_SIZE 0x00010000 /* 64 kB */ -# define CFG_CS3_CFG 0x000ADF00 /* 10WS, MX, AL, CE, AS_25, DS_32 */ +# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE +# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */ +# define CONFIG_SYS_CS3_CFG 0x000ADF00 /* 10WS, MX, AL, CE, AS_25, DS_32 */ #else -# define CFG_CS3_START CFG_CPLD_BASE -# define CFG_CS3_SIZE 0x00010000 /* 64 kB */ -# define CFG_CS3_CFG 0x000AD800 /* 10WS, MX, AL, CE, AS_24, DS_8 */ +# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE +# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */ +# define CONFIG_SYS_CS3_CFG 0x000AD800 /* 10WS, MX, AL, CE, AS_24, DS_8 */ #endif -#define CFG_CS_BURST 0x00000000 -#define CFG_CS_DEADCYCLE 0x33333333 +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 /*----------------------------------------------------------------------- * USB stuff @@ -393,23 +363,24 @@ #define CONFIG_IDE_RESET /* reset for ide supported */ #define CONFIG_IDE_PREINIT -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ +#define CONFIG_SYS_ATA_CS_ON_I2C2 +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ -#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA /* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (0x0060) +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) /* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET (0x005C) +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) /* Interval between registers */ -#define CFG_ATA_STRIDE 4 +#define CONFIG_SYS_ATA_STRIDE 4 #endif /* __CONFIG_H */