X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-stamp.h;h=f250cdbf0a7c4193b37e95db3ae69e205c97526b;hb=3a926a304b9f7a74dbe67ae7dc4cb6c7a174c6c0;hp=92ceb3815b67e0209228d7900f06fd9eb3ffc062;hpb=c6fb83d21729321426308c3acff2a3dfb20d250b;p=karo-tx-uboot.git

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 92ceb3815b..f250cdbf0a 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -52,7 +52,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
 #define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
 
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(384 * 1024)
 
 
@@ -63,12 +63,8 @@
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		bf537-stamp
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -88,11 +84,7 @@
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_ALL
 
 
 /*
@@ -122,42 +114,39 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	arch/blackfin/cpu/traps.o		(.text .text.*); \
-	arch/blackfin/cpu/interrupt.o	(.text .text.*); \
-	arch/blackfin/cpu/serial.o		(.text .text.*); \
-	common/dlmalloc.o		(.text .text.*); \
-	lib/crc32.o		(.text .text.*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o		(.text .text.*);
+	common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 
 /*
  * SPI_MMC Settings
  */
+#define CONFIG_MMC_SPI
+#ifdef CONFIG_MMC_SPI
 #define CONFIG_MMC
-#define CONFIG_SPI_MMC
-
+#define CONFIG_GENERIC_MMC
+#endif
 
 /*
  * NAND Settings
  */
 /* #define CONFIG_NAND_PLAT */
+#ifdef CONFIG_NAND_PLAT
 #define CONFIG_SYS_NAND_BASE		0x20212000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
 #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY     PF3
 #define BFIN_NAND_WRITE(addr, cmd) \
 	do { \
 		bfin_write8(addr, cmd); \
@@ -166,14 +155,8 @@
 
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip)      (bfin_read_PORTFIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
-	do { \
-		bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \
-		bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \
-		bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \
-	} while (0)
-
+#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF3
+#endif /* CONFIG_NAND_PLAT */
 
 /*
  * CF-CARD IDE-HDD Support
@@ -268,22 +251,23 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
 
-/* #define CONFIG_BF537_STAMP_LEDCMD	1 */
-
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
-#define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
+#define CONFIG_SYS_POST_HOTKEYS_GPIO	GPIO_PF5
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+	GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+	GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+	10, 11, 12, 13,
+#define CONFIG_SYS_POST_FLASH_START	11
+#define CONFIG_SYS_POST_FLASH_END	71
 #endif
 
 /* These are for board tests */
 #if 0
 #define CONFIG_BOOTCOMMAND       "bootldr 0x203f0100"
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
-	"autoboot in %d seconds: press space to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR " "
 #endif