X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fethernut5.h;h=c7b1e5cbf71717b31893a0ea745fe5e0384a9948;hb=8838f8fc437e9addc93fd2616dd5d0057697d40c;hp=7fd0b51860fd690a662121ef3656eacea5b677bd;hpb=c0e5dd88c438a41bf180dde0c2dc4c67dcd8058d;p=karo-tx-uboot.git

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 7fd0b51860..c7b1e5cbf7 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,6 +12,8 @@
 
 #include <asm/hardware.h>
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* The first stage boot loader expects u-boot running at this address. */
 #define CONFIG_SYS_TEXT_BASE	0x27000000	/* 16MB available */
 
@@ -23,15 +25,12 @@
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
 #define CONFIG_DISPLAY_CPUINFO		/* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ			1000
 
 /* 32kB internal SRAM */
 #define CONFIG_SRAM_BASE	0x00300000 /*AT91SAM9XE_SRAM_BASE */
@@ -61,7 +60,6 @@
 /* 512kB DataFlash at NPCS0 */
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS	1
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
@@ -79,7 +77,6 @@
 
 /* SPI */
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT	(5 * CONFIG_SYS_HZ)
 #define AT91_SPI_CLK			15000000
 
 /* Serial port */
@@ -93,29 +90,13 @@
 #define CONFIG_AT91_GPIO
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_SPI
 
-#ifdef MINIMAL_LOADER
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_EDITENV
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-#else
+#ifndef MINIMAL_LOADER
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CACHE
@@ -131,7 +112,6 @@
 #define CONFIG_CMD_RARP
 #define CONFIG_CMD_REISER
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_UBI
@@ -150,12 +130,11 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
 #endif
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif