X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fhighbank.h;h=7f331a6a73cdc5975dd9be2a6bdc74787476ac11;hb=36e4076eebf9a6ecae8f99d09a47b7c92a008c2d;hp=7dbee3cdb99bb350753fb30c66fb0744ebfcdb97;hpb=faca8ff55f4a2cf45fb906cc37f44601149fc00e;p=karo-tx-uboot.git

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 7dbee3cdb9..7f331a6a73 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -7,15 +7,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <config_distro_defaults.h>
+
 #define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_GENERIC_BOARD
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
-#define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
 
 #define CONFIG_SYS_TIMER_RATE		(150000000/256)
@@ -48,51 +49,22 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-
 #define CONFIG_CALXEDA_XGMAC
 
-/* PXE support */
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
-#define CONFIG_BOOTP_VCI_STRING		"U-boot.armv7.highbank"
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADS
 #define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
 
-#define CONFIG_BOOTDELAY		2
 #define CONFIG_BOOT_RETRY_TIME		-1
 #define CONFIG_RESET_TO_RETRY
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay
-#define CONFIG_AUTOBOOT_KEYED_CTRLC
+
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP		/* undef to save memory		 */
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PROMPT		"Highbank #"
-#define CONFIG_SYS_HUSH_PARSER
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					 sizeof(CONFIG_SYS_PROMPT)+16)
@@ -103,8 +75,9 @@
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
+ * The DRAM is already setup, so do not touch the DT node later.
  */
-#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_NR_DRAM_BANKS		0
 #define PHYS_SDRAM_1_SIZE		(4089 << 20)
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)