X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fkatmai.h;h=ca0df2d0ce00f98937adfe2a23527cb33cf06480;hb=3b7891f1498f77e7df66b7955accb946e9eb6037;hp=ea6cf0d23fc1b30273b16bf9bd7e127a631b2003;hpb=1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f;p=karo-tx-uboot.git diff --git a/include/configs/katmai.h b/include/configs/katmai.h index ea6cf0d23f..ca0df2d0ce 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -4,23 +4,7 @@ * * (C) Copyright 2004 Paul Reynolds * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /************************************************************************ @@ -37,15 +21,17 @@ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_440SPE 1 /* Specifc SPe support */ +#define CONFIG_440SPE_REVA 1 /* Support old Rev A. */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ #define CONFIG_SYS_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 + /* * Enable this board for more than 2GB of SDRAM */ #define CONFIG_PHYS_64BIT #define CONFIG_VERY_BIG_RAM -#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) /* * Include common defines/options for all AMCC eval boards @@ -53,13 +39,6 @@ #define CONFIG_HOSTNAME katmai #include "amcc-common.h" -/* - * For booting 256K-paged Linux we should have 16MB of memory - * for Linux initial memory map - */ -#undef CONFIG_SYS_BOOTMAPSZ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CONFIG_SHOW_BOOT_PROGRESS @@ -68,7 +47,6 @@ * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ @@ -102,17 +80,15 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_UART1_CONSOLE +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /*----------------------------------------------------------------------- @@ -127,10 +103,8 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ #define IIC0_BOOTPROM_ADDR 0x50 @@ -142,6 +116,11 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 8 + /* I2C RTC */ #define CONFIG_RTC_M41T11 1 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ @@ -184,11 +163,10 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_AMCC_DEF_ENV \ CONFIG_AMCC_DEF_ENV_POWERPC \ - CONFIG_AMCC_DEF_ENV_PPC_OLD \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "kernel_addr=fff10000\0" \ - "ramdisk_addr=fff20000\0" \ - "kozio=bootm ffc60000\0" \ + "kernel_addr=ff000000\0" \ + "fdt_addr=ff1e0000\0" \ + "ramdisk_addr=ff200000\0" \ "pciconfighost=1\0" \ "pcie_mode=RP:RP:RP\0" \ "" @@ -196,8 +174,11 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE +#define CONFIG_CMD_ECCTEST +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP @@ -240,6 +221,7 @@ */ /* General PCI */ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE