X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fkilauea.h;h=bd3bbb79a5d69059a76f6575be52d8423b0bf0d6;hb=778c3cbd857f4abe54773f399204dd86ffe6516c;hp=965599c7a7b94fdb08b90c2d0a866fccfd825995;hpb=d7b0781e2b734ff64ba71847a3ab5340ca547a51;p=karo-tx-uboot.git diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 965599c7a7..bd3bbb79a5 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -5,23 +5,7 @@ * (C) Copyright 2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /************************************************************************ @@ -39,6 +23,24 @@ #define CONFIG_405EX 1 /* Specifc 405EX support*/ #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + +/* + * CHIP_21 errata - you must set this to match your exact CPU, else your + * board will not boot. DO NOT enable this unless you have JTAG available + * for recovery, in the event you get it wrong. + * + * Kilauea uses the 405EX, while Haleakala uses the 405EXr. Either board + * may be equipped for security or not. You must look at the CPU part + * number to be sure what you have. + */ +/* #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY */ +/* #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY */ +/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY */ +/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY */ + /* * Include common defines/options for all AMCC eval boards */ @@ -47,6 +49,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES #define CONFIG_BOARD_EMAC_COUNT /*----------------------------------------------------------------------- @@ -56,7 +59,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFC000000 #define CONFIG_SYS_NAND_ADDR 0xF8000000 #define CONFIG_SYS_FPGA_BASE 0xF0000000 -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/ /*----------------------------------------------------------------------- * Initial RAM & Stack Pointer Configuration Options @@ -88,9 +90,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) /* 4 KiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * If the data cache is being used for the primordial stack and global @@ -102,11 +103,10 @@ #if defined(CONFIG_SYS_INIT_DCACHE_CS) # define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -# define CONFIG_SYS_POST_ALT_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) +# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) #else # define CONFIG_SYS_INIT_EXTRA_SIZE 16 # define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE) -# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 4) # define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ @@ -114,8 +114,7 @@ * Serial Port *----------------------------------------------------------------------*/ #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ -/* define this if you want console on UART1 */ -#undef CONFIG_UART1_CONSOLE +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ /*----------------------------------------------------------------------- * Environment @@ -195,9 +194,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) #define CONFIG_SYS_NAND_OOBSIZE 16 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS) #define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} #ifdef CONFIG_ENV_IS_IN_NAND @@ -217,8 +214,6 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ @@ -231,7 +226,7 @@ * SDRAM Controller DDR autocalibration values and takes a lot longer * to run than Method_B. * (See the Method_A and Method_B algorithm discription in the file: - * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) + * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A * * DDR Autocalibration Method_B is the default. @@ -374,7 +369,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ @@ -436,7 +431,6 @@ */ #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE -#define CONFIG_CMD_LOG #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_SNTP @@ -461,7 +455,8 @@ CONFIG_SYS_POST_UART) /* Define here the base-addresses of the UARTs to test in POST */ -#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE} +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2 } #define CONFIG_LOGBUFFER #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ @@ -472,6 +467,7 @@ * PCI stuff *----------------------------------------------------------------------*/ #define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE @@ -522,9 +518,22 @@ #define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_ADDR | 0x1e000) #endif -/* Memory Bank 2 (FPGA) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x9400C800 -#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x18000) +/* Memory Bank 2 (FPGA) initialization */ +#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_ENABLED | \ + EBC_BXAP_FWT_ENCODE(6) | \ + EBC_BXAP_BWT_ENCODE(1) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(3) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(4) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x18000) #define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */ @@ -573,7 +582,7 @@ * Some Kilauea stuff..., mainly fpga registers */ #define CONFIG_SYS_FPGA_REG_BASE CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_FPGA_FIFO_BASE (in32(CONFIG_SYS_FPGA_BASE) | (1 << 10)) +#define CONFIG_SYS_FPGA_FIFO_BASE (CONFIG_SYS_FPGA_BASE | (1 << 10)) /* interrupt */ #define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT 0x80000000 @@ -604,4 +613,8 @@ #define CONFIG_SYS_FPGA_USER_LED0 0x00000200 #define CONFIG_SYS_FPGA_USER_LED1 0x00000100 +#define CONFIG_SYS_FPGA_MAGIC_MASK 0xffff0000 +#define CONFIG_SYS_FPGA_MAGIC 0xabcd0000 +#define CONFIG_SYS_FPGA_VER_MASK 0x0000ff00 + #endif /* __CONFIG_H */