X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fscb9328.h;h=f4a40bb9324717e8b83501b09bb3183a976f587a;hb=f2168440de74036b207a6626c7a9fd9d164951df;hp=a4249c47c6251017f72eb73fec1acfaa384cc92c;hpb=8aa1a2d115420b1eb126f69f3547b54d275c3228;p=karo-tx-uboot.git diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index a4249c47c6..f4a40bb932 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -1,21 +1,7 @@ /* * Copyright (C) 2003 ETC s.r.o. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * + * SPDX-License-Identifier: GPL-2.0+ * Written by Peter Figuli , 2003. * * 2003/13/06 Initial MP10 Support copied from wepep250 @@ -24,32 +10,35 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ +#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */ #define CONFIG_SCB9328 1 /* on a scb9328tronix board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ +#define CONFIG_IMX_SERIAL #define CONFIG_IMX_SERIAL1 /* * Select serial console configuration */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - ) +#include -#include +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE /* * Boot options. Setting delay to -1 stops autostart count down. @@ -69,22 +58,18 @@ /* * General options for u-boot. Modify to save memory foot print */ -#define CFG_LONGHELP /* undef saves memory */ -#define CFG_PROMPT "scb9328> " /* prompt string */ -#define CFG_CBSIZE 256 /* console I/O buffer */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */ -#define CFG_MAXARGS 16 /* max command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */ - -#define CFG_MEMTEST_START 0x08100000 /* memtest test area */ -#define CFG_MEMTEST_END 0x08F00000 +#define CONFIG_SYS_LONGHELP /* undef saves memory */ +#define CONFIG_SYS_PROMPT "scb9328> " /* prompt string */ +#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ +#define CONFIG_SYS_MAXARGS 16 /* max command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ -#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */ +#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ +#define CONFIG_SYS_MEMTEST_END 0x08F00000 -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x141 /* core clock - register value */ +#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BAUDRATE 115200 /* * Definitions related to passing arguments to kernel. @@ -92,23 +77,11 @@ #define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ #define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ #define CONFIG_INITRD_TAG 1 /* send initrd params */ -#undef CONFIG_VFD /* do not send framebuffer setup */ - /* * Malloc pool need to host env + 128 Kb reserve for other allocations. */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) ) - - -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) /* SDRAM Setup Values 0x910a8300 Precharge Command CAS 3 @@ -128,14 +101,10 @@ #define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */ #define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -/* - * Flash Controller settings - */ - -/* - * Hardware drivers - */ +#define CONFIG_SYS_TEXT_BASE 0x10000000 +#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (SCB9328_SDRAM_1 + 0xf00000) /* * Configuration for FLASH memory for the Synertronixx board @@ -145,8 +114,8 @@ /* 32MB */ #ifdef SCB9328_FLASH_32M -#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CFG_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ #define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ #define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ #define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */ @@ -156,8 +125,8 @@ #else /* 16MB */ -#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ #define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ #define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ #define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */ @@ -170,23 +139,23 @@ is not so clear to me. In other words we can provide more informations to user, but this expects more complex flash handling we do not provide now.*/ -#undef CFG_FLASH_CFI +#undef CONFIG_SYS_FLASH_CFI -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* timeout for Erase operation */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 /* timeout for Write operation */ -#define CFG_FLASH_BASE SCB9328_FLASH_BASE +#define CONFIG_SYS_FLASH_BASE SCB9328_FLASH_BASE /* * This is setting for JFFS2 support in u-boot. * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_FIRST_SECTOR 5 -#define CFG_JFFS2_NUM_BANKS 1 +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* * Environment setup. Definitions of monitor location and size with @@ -203,14 +172,14 @@ /* Setup for PA23 which is Reset Default PA23 but has to become CS5 */ -#define CFG_GPR_A_VAL 0x00800000 -#define CFG_GIUS_A_VAL 0x0043fffe +#define CONFIG_SYS_GPR_A_VAL 0x00800000 +#define CONFIG_SYS_GIUS_A_VAL 0x0043fffe -#define CFG_MONITOR_BASE 0x10000000 -#define CFG_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x10020000 /* absolute address for now */ -#define CFG_ENV_SIZE 0x20000 +#define CONFIG_SYS_MONITOR_BASE 0x10000000 +#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */ +#define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */ @@ -224,39 +193,35 @@ * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN| */ -#define CFG_CS0U_VAL 0x000F2000 -#define CFG_CS0L_VAL 0x11110d01 -#define CFG_CS1U_VAL 0x000F0a00 -#define CFG_CS1L_VAL 0x11110601 -#define CFG_CS2U_VAL 0x0 -#define CFG_CS2L_VAL 0x0 +#define CONFIG_SYS_CS0U_VAL 0x000F2000 +#define CONFIG_SYS_CS0L_VAL 0x11110d01 +#define CONFIG_SYS_CS1U_VAL 0x000F0a00 +#define CONFIG_SYS_CS1L_VAL 0x11110601 +#define CONFIG_SYS_CS2U_VAL 0x0 +#define CONFIG_SYS_CS2L_VAL 0x0 -#define CFG_CS3U_VAL 0x000FFFFF -#define CFG_CS3L_VAL 0x00000303 +#define CONFIG_SYS_CS3U_VAL 0x000FFFFF +#define CONFIG_SYS_CS3L_VAL 0x00000303 -#define CFG_CS4U_VAL 0x000F0a00 -#define CFG_CS4L_VAL 0x11110301 +#define CONFIG_SYS_CS4U_VAL 0x000F0a00 +#define CONFIG_SYS_CS4L_VAL 0x11110301 /* CNC == 3 too long - #define CFG_CS5U_VAL 0x0000C210 */ + #define CONFIG_SYS_CS5U_VAL 0x0000C210 */ -/* #define CFG_CS5U_VAL 0x00008400 +/* #define CONFIG_SYS_CS5U_VAL 0x00008400 mal laenger mahcen, ob der bei 150MHz laenger haelt dann und kaum langsamer ist */ -/* #define CFG_CS5U_VAL 0x00009400 - #define CFG_CS5L_VAL 0x11010D03 */ +/* #define CONFIG_SYS_CS5U_VAL 0x00009400 + #define CONFIG_SYS_CS5L_VAL 0x11010D03 */ -#define CFG_CS5U_VAL 0x00008400 -#define CFG_CS5L_VAL 0x00000D03 +#define CONFIG_SYS_CS5U_VAL 0x00008400 +#define CONFIG_SYS_CS5L_VAL 0x00000D03 -#define CONFIG_DRIVER_DM9000 1 #define CONFIG_DRIVER_DM9000 1 #define CONFIG_DM9000_BASE 0x16000000 #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE+4) -/* #define CONFIG_DM9000_USE_8BIT */ -#define CONFIG_DM9000_USE_16BIT -/* #define CONFIG_DM9000_USE_32BIT */ /* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1) f_ref=16,777MHz @@ -278,24 +243,24 @@ #define CPU200 #ifdef CPU200 -#define CFG_MPCTL0_VAL 0x00321431 +#define CONFIG_SYS_MPCTL0_VAL 0x00321431 #else -#define CFG_MPCTL0_VAL 0x040e200e +#define CONFIG_SYS_MPCTL0_VAL 0x040e200e #endif /* #define BUS64 */ #define BUS72 #ifdef BUS72 -#define CFG_SPCTL0_VAL 0x04002400 +#define CONFIG_SYS_SPCTL0_VAL 0x04002400 #endif #ifdef BUS96 -#define CFG_SPCTL0_VAL 0x04001800 +#define CONFIG_SYS_SPCTL0_VAL 0x04001800 #endif #ifdef BUS64 -#define CFG_SPCTL0_VAL 0x08001800 +#define CONFIG_SYS_SPCTL0_VAL 0x08001800 #endif /* Das ist der BCLK Divider, der aus der System PLL @@ -309,11 +274,11 @@ Bit 21: MPLL Restart */ #ifdef BUS64 -#define CFG_CSCR_VAL 0x2f030003 +#define CONFIG_SYS_CSCR_VAL 0x2f030003 #endif #ifdef BUS72 -#define CFG_CSCR_VAL 0x2f030403 +#define CONFIG_SYS_CSCR_VAL 0x2f030403 #endif /* @@ -321,7 +286,7 @@ * one may expect. For instance loadb command do not cares :-) * So advice is - do not relay on this... */ -#define CFG_LOAD_ADDR 0x08400000 +#define CONFIG_SYS_LOAD_ADDR 0x08400000 #define MHZ16QUARZINUSE @@ -334,7 +299,7 @@ #define CONFIG_SYS_CLK_FREQ 16780000 /* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */ -#define CFG_FMCR_VAL 0x00000001 +#define CONFIG_SYS_FMCR_VAL 0x00000001 /* Bit[0:3] contain PERCLK1DIV for UART 1 0x000b00b ->b<- -> 192MHz/12=16MHz @@ -342,15 +307,15 @@ 0x000b00b ->3<- -> 64MHz/4=16MHz */ #ifdef BUS96 -#define CFG_PCDR_VAL 0x000b00b5 +#define CONFIG_SYS_PCDR_VAL 0x000b00b5 #endif #ifdef BUS64 -#define CFG_PCDR_VAL 0x000b00b3 +#define CONFIG_SYS_PCDR_VAL 0x000b00b3 #endif #ifdef BUS72 -#define CFG_PCDR_VAL 0x000b00b8 +#define CONFIG_SYS_PCDR_VAL 0x000b00b8 #endif #endif /* __CONFIG_H */