X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fspi.h;h=18362364cf0ea639e55b275a2b229e66dc1fda9a;hb=8ecf7f21941579028c9565f6a2212bb1c098bd4e;hp=aa0a48ea62710dd019c77c75cc5350a9f61fb14d;hpb=68e80fdda1336068f40915388bbdacfd2b75233a;p=karo-tx-uboot.git

diff --git a/include/spi.h b/include/spi.h
index aa0a48ea62..18362364cf 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -34,14 +34,16 @@
 
 /* SPI TX operation modes */
 #define SPI_OPM_TX_QPP		(1 << 0)
+#define SPI_OPM_TX_BP		(1 << 1)
 
 /* SPI RX operation modes */
 #define SPI_OPM_RX_AS		(1 << 0)
-#define SPI_OPM_RX_DOUT	(1 << 1)
-#define SPI_OPM_RX_DIO		(1 << 2)
-#define SPI_OPM_RX_QOF		(1 << 3)
-#define SPI_OPM_RX_QIOF	(1 << 4)
-#define SPI_OPM_RX_EXTN	(SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \
+#define SPI_OPM_RX_AF		(1 << 1)
+#define SPI_OPM_RX_DOUT		(1 << 2)
+#define SPI_OPM_RX_DIO		(1 << 3)
+#define SPI_OPM_RX_QOF		(1 << 4)
+#define SPI_OPM_RX_QIOF		(1 << 5)
+#define SPI_OPM_RX_EXTN	(SPI_OPM_RX_AS | SPI_OPM_RX_AF | SPI_OPM_RX_DOUT | \
 				SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \
 				SPI_OPM_RX_QIOF)
 
@@ -52,23 +54,45 @@
 /* Header byte that marks the start of the message */
 #define SPI_PREAMBLE_END_BYTE	0xec
 
-#define SPI_DEFAULT_WORDLEN 8
+#define SPI_DEFAULT_WORDLEN	8
 
 #ifdef CONFIG_DM_SPI
+/* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */
 struct dm_spi_bus {
 	uint max_hz;
 };
 
+/**
+ * struct dm_spi_platdata - platform data for all SPI slaves
+ *
+ * This describes a SPI slave, a child device of the SPI bus. To obtain this
+ * struct from a spi_slave, use dev_get_parent_platdata(dev) or
+ * dev_get_parent_platdata(slave->dev).
+ *
+ * This data is immuatable. Each time the device is probed, @max_hz and @mode
+ * will be copied to struct spi_slave.
+ *
+ * @cs:		Chip select number (0..n-1)
+ * @max_hz:	Maximum bus speed that this slave can tolerate
+ * @mode:	SPI mode to use for this device (see SPI mode flags)
+ */
+struct dm_spi_slave_platdata {
+	unsigned int cs;
+	uint max_hz;
+	uint mode;
+};
+
 #endif /* CONFIG_DM_SPI */
 
 /**
  * struct spi_slave - Representation of a SPI slave
  *
  * For driver model this is the per-child data used by the SPI bus. It can
- * be accessed using dev_get_parentdata() on the slave device. Each SPI
- * driver should define this child data in its U_BOOT_DRIVER() definition:
- *
- *	.per_child_auto_alloc_size	= sizeof(struct spi_slave),
+ * be accessed using dev_get_parentdata() on the slave device. The SPI uclass
+ * sets uip per_child_auto_alloc_size to sizeof(struct spi_slave), and the
+ * driver should not override it. Two platform data fields (max_hz and mode)
+ * are copied into this structure to provide an initial value. This allows
+ * them to be changed, since we should never change platform data in drivers.
  *
  * If not using driver model, drivers are expected to extend this with
  * controller-specific data.
@@ -76,6 +100,8 @@ struct dm_spi_bus {
  * @dev:		SPI slave device
  * @max_hz:		Maximum speed for this slave
  * @mode:		SPI mode to use for this slave (see SPI mode flags)
+ * @speed:		Current bus speed. This is 0 until the bus is first
+ *			claimed.
  * @bus:		ID of the bus that the slave is attached to. For
  *			driver model this is the sequence number of the SPI
  *			bus (bus->seq) so does not need to be stored
@@ -93,11 +119,12 @@ struct spi_slave {
 #ifdef CONFIG_DM_SPI
 	struct udevice *dev;	/* struct spi_slave is dev->parentdata */
 	uint max_hz;
+	uint speed;
 	uint mode;
 #else
 	unsigned int bus;
-#endif
 	unsigned int cs;
+#endif
 	u8 op_mode_rx;
 	u8 op_mode_tx;
 	unsigned int wordlen;
@@ -362,12 +389,12 @@ struct dm_spi_ops {
 	 * allowed to claim the same bus for several slaves without releasing
 	 * the bus in between.
 	 *
-	 * @bus:	The SPI slave
+	 * @dev:	The SPI slave
 	 *
 	 * Returns: 0 if the bus was claimed successfully, or a negative value
 	 * if it wasn't.
 	 */
-	int (*claim_bus)(struct udevice *bus);
+	int (*claim_bus)(struct udevice *dev);
 
 	/**
 	 * Release the SPI bus
@@ -376,9 +403,9 @@ struct dm_spi_ops {
 	 * all transfers have finished. It may disable any SPI hardware as
 	 * appropriate.
 	 *
-	 * @bus:	The SPI slave
+	 * @dev:	The SPI slave
 	 */
-	int (*release_bus)(struct udevice *bus);
+	int (*release_bus)(struct udevice *dev);
 
 	/**
 	 * Set the word length for SPI transactions
@@ -390,7 +417,7 @@ struct dm_spi_ops {
 	 *
 	 * Returns: 0 on success, -ve on failure.
 	 */
-	int (*set_wordlen)(struct udevice *bus, unsigned int wordlen);
+	int (*set_wordlen)(struct udevice *dev, unsigned int wordlen);
 
 	/**
 	 * SPI transfer
@@ -534,30 +561,26 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
 int spi_chip_select(struct udevice *slave);
 
 /**
- * spi_bind_device() - bind a device to a bus's chip select
- *
- * This binds a new device to an given chip select (which must be unused).
+ * spi_find_chip_select() - Find the slave attached to chip select
  *
  * @bus:	SPI bus to search
- * @cs:		Chip select to attach to
- * @drv_name:	Name of driver to attach to this chip select
- * @dev_name:	Name of the new device thus created
- * @devp:	Returns the newly bound device
+ * @cs:		Chip select to look for
+ * @devp:	Returns the slave device if found
+ * @return 0 if found, -ENODEV on error
  */
-int spi_bind_device(struct udevice *bus, int cs, const char *drv_name,
-		    const char *dev_name, struct udevice **devp);
+int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp);
 
 /**
- * spi_ofdata_to_platdata() - decode standard SPI platform data
+ * spi_slave_ofdata_to_platdata() - decode standard SPI platform data
  *
- * This decodes the speed and mode from a device tree node and puts it into
- * the spi_slave structure.
+ * This decodes the speed and mode for a slave from a device tree node
  *
  * @blob:	Device tree blob
  * @node:	Node offset to read from
- * @spi:	Place to put the decoded information
+ * @plat:	Place to put the decoded information
  */
-int spi_ofdata_to_platdata(const void *blob, int node, struct spi_slave *spi);
+int spi_slave_ofdata_to_platdata(const void *blob, int node,
+				 struct dm_spi_slave_platdata *plat);
 
 /**
  * spi_cs_info() - Check information on a chip select
@@ -593,7 +616,7 @@ int sandbox_spi_get_emul(struct sandbox_state *state,
 			 struct udevice *bus, struct udevice *slave,
 			 struct udevice **emulp);
 
-/* Access the serial operations for a device */
+/* Access the operations for a SPI device */
 #define spi_get_ops(dev)	((struct dm_spi_ops *)(dev)->driver->ops)
 #define spi_emul_get_ops(dev)	((struct dm_spi_emul_ops *)(dev)->driver->ops)
 #endif /* CONFIG_DM_SPI */