ENGR00238307 MX6SL_EVK bluetooth: Add support to Silex SXSDMAN module

mx6sl_evk board uses Silex SXSDMAN board for bluetooth, add uart4 driver
to support it.

Signed-off-by: Lionel Xu <Lionel.Xu@freescale.com>

diff --git a/arch/arm/mach-mx6/board-mx6sl_evk.c b/arch/arm/mach-mx6/board-mx6sl_evk.c
index ad759eff24287b960813d5fe38c61d57a2a6f89e..1b09e4499264d20b508ab4b8b91bb850ec640ad8 100644 (file)
--- a/arch/arm/mach-mx6/board-mx6sl_evk.c
+++ b/arch/arm/mach-mx6/board-mx6sl_evk.c
@@ -90,6 +90,8 @@ extern int __init mx6sl_evk_init_pfuze100(u32 int_gpio);
 
 static int csi_enabled;
 
+#define SXSDMAN_BLUETOOTH_ENABLE
+
 static iomux_v3_cfg_t mx6sl_brd_csi_enable_pads[] = {
        MX6SL_PAD_EPDC_GDRL__CSI_MCLK,
        MX6SL_PAD_EPDC_SDCE3__I2C3_SDA,
@@ -112,6 +114,16 @@ static iomux_v3_cfg_t mx6sl_brd_csi_enable_pads[] = {
        MX6SL_PAD_EPDC_SDOE__GPIO_1_25,         /* CMOS_PWDN GPIO */
 };
 
+#ifdef SXSDMAN_BLUETOOTH_ENABLE
+static iomux_v3_cfg_t mx6sl_uart4_pads[] = {
+       MX6SL_PAD_SD1_DAT4__UART4_RXD,
+       MX6SL_PAD_SD1_DAT5__UART4_TXD,
+       MX6SL_PAD_SD1_DAT6__UART4_RTS,
+       MX6SL_PAD_SD1_DAT7__UART4_CTS,
+       /* gpio for reset */
+       MX6SL_PAD_SD1_DAT0__GPIO_5_11,
+};
+#else
 /* uart2 pins */
 static iomux_v3_cfg_t mx6sl_uart2_pads[] = {
        MX6SL_PAD_SD2_DAT5__UART2_TXD,
@@ -119,6 +131,7 @@ static iomux_v3_cfg_t mx6sl_uart2_pads[] = {
        MX6SL_PAD_SD2_DAT6__UART2_RTS,
        MX6SL_PAD_SD2_DAT7__UART2_CTS,
 };
+#endif
 
 enum sd_pad_mode {
        SD_PAD_MODE_LOW_SPEED,
@@ -788,11 +801,19 @@ static struct viv_gpu_platform_data imx6q_gpu_pdata __initdata = {
 
 void __init early_console_setup(unsigned long base, struct clk *clk);
 
+#ifdef SXSDMAN_BLUETOOTH_ENABLE
+static const struct imxuart_platform_data mx6sl_evk_uart4_data __initconst = {
+       .flags      = IMXUART_HAVE_RTSCTS,
+       .dma_req_rx = MX6Q_DMA_REQ_UART4_RX,
+       .dma_req_tx = MX6Q_DMA_REQ_UART4_TX,
+};
+#else
 static const struct imxuart_platform_data mx6sl_evk_uart1_data __initconst = {
        .flags      = IMXUART_HAVE_RTSCTS | IMXUART_SDMA,
        .dma_req_rx = MX6Q_DMA_REQ_UART2_RX,
        .dma_req_tx = MX6Q_DMA_REQ_UART2_TX,
 };
+#endif
 
 static inline void mx6_evk_init_uart(void)
 {
@@ -1401,6 +1422,22 @@ static void mx6_snvs_poweroff(void)
        writel(value | 0x60, mx6_snvs_base + SNVS_LPCR);
 }
 
+#ifdef SXSDMAN_BLUETOOTH_ENABLE
+static int uart4_enabled;
+static int __init uart4_setup(char * __unused)
+{
+       uart4_enabled = 1;
+       return 1;
+}
+__setup("bluetooth", uart4_setup);
+
+static void __init uart4_init(void)
+{
+       mxc_iomux_v3_setup_multiple_pads(mx6sl_uart4_pads,
+                                       ARRAY_SIZE(mx6sl_uart4_pads));
+       imx6sl_add_imx_uart(3, &mx6sl_evk_uart4_data);
+}
+#else
 static int uart2_enabled;
 static int __init uart2_setup(char * __unused)
 {
@@ -1415,6 +1452,7 @@ static void __init uart2_init(void)
                                        ARRAY_SIZE(mx6sl_uart2_pads));
        imx6sl_add_imx_uart(1, &mx6sl_evk_uart1_data);
 }
+#endif
 
 static void mx6sl_evk_bt_reset(void)
 {
@@ -1566,8 +1604,13 @@ static void __init mx6_evk_init(void)
        imx6q_init_audio();
 
        /* uart2 for bluetooth */
+#ifdef SXSDMAN_BLUETOOTH_ENABLE
+       if (uart4_enabled)
+               uart4_init();
+#else
        if (uart2_enabled)
                uart2_init();
+#endif
 
        mxc_register_device(&mxc_bt_rfkill, &mxc_bt_rfkill_data);