GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
-/*
- * Interrupt Meta-data specification. The ipiflag helps
- * in building ipi_map.
- */
-struct gic_intr_map {
- unsigned int cpunum; /* Directed to this CPU */
-#define GIC_UNUSED 0xdead /* Dummy data */
- unsigned int pin; /* Directed to this Pin */
- unsigned int polarity; /* Polarity : +/- */
- unsigned int trigtype; /* Trigger : Edge/Levl */
- unsigned int flags; /* Misc flags */
-#define GIC_FLAG_TRANSPARENT 0x01
-};
-
-/*
- * This is only used in EIC mode. This helps to figure out which
- * shared interrupts we need to process when we get a vector interrupt.
- */
-#define GIC_MAX_SHARED_INTR 0x5
-struct gic_shared_intr_map {
- unsigned int num_shared_intr;
- unsigned int intr_list[GIC_MAX_SHARED_INTR];
- unsigned int local_intr_mask;
-};
-
/* GIC nomenclature for Core Interrupt Pins. */
#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
#define GIC_CPU_INT1 1 /* . */
#define GIC_CPU_INT4 4 /* . */
#define GIC_CPU_INT5 5 /* Core Interrupt 7 */
+/* Add 2 to convert GIC CPU pin to core interrupt */
+#define GIC_CPU_PIN_OFFSET 2
+
/* Local GIC interrupts. */
#define GIC_INT_TMR (GIC_CPU_INT5)
#define GIC_INT_PERFCTR (GIC_CPU_INT5)
extern unsigned int gic_present;
extern unsigned int gic_frequency;
extern unsigned long _gic_base;
-extern unsigned int gic_irq_base;
extern unsigned int gic_irq_flags[];
-extern struct gic_shared_intr_map gic_shared_intr_map[];
+extern unsigned int gic_cpu_pin;
extern void gic_init(unsigned long gic_base_addr,
- unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
- unsigned int intrmap_size, unsigned int irqbase);
+ unsigned long gic_addrspace_size, unsigned int cpu_vec,
+ unsigned int irqbase);
extern void gic_clocksource_init(unsigned int);
extern unsigned int gic_compare_int (void);
extern cycle_t gic_read_count(void);
#define MIPSCPU_INT_SW1 1
#define MIPSCPU_INT_MB0 2
#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0
+#define MIPSCPU_INT_GIC MIPSCPU_INT_MB0 /* GIC chained interrupt */
#define MIPSCPU_INT_MB1 3
#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1
-#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */
#define MIPSCPU_INT_MB2 4
-#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
#define MIPSCPU_INT_MB4 6
#define MSC01E_INT_PERFCTR 10
#define MSC01E_INT_CPUCTR 11
-/* External Interrupts used for IPI */
-#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17
-#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19
-#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21
-#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23
+/* GIC external interrupts */
+#define GIC_INT_I8259A 3
#endif /* !(_MIPS_MALTAINT_H) */
#define GIC_BASE_ADDR 0x1b1c0000
#define GIC_ADDRSPACE_SZ (128 * 1024)
+/* CPU interrupt offsets */
+#define CPU_INT_GIC 2
+#define CPU_INT_EHCI 2
+#define CPU_INT_UART0 4
+#define CPU_INT_UART1 4
+#define CPU_INT_NET 6
+
+/* GIC interrupt offsets */
+#define GIC_INT_NET 0
+#define GIC_INT_UART1 2
+#define GIC_INT_UART0 3
+#define GIC_INT_EHCI 5
+
#endif /* !(_MIPS_SEAD3INT_H) */
clockevents_register_device(cd);
- GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP), 0x80000002);
+ GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP),
+ GIC_MAP_TO_PIN_MSK | gic_cpu_pin);
GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_SMASK), GIC_VPE_SMASK_CMP_MSK);
if (gic_timer_irq_installed)
#include <asm/rtlx.h>
static unsigned long _msc01_biu_base;
-static unsigned int ipi_map[NR_CPUS];
static DEFINE_RAW_SPINLOCK(mips_irq_lock);
-#ifdef CONFIG_MIPS_GIC_IPI
-DECLARE_BITMAP(ipi_ints, GIC_NUM_INTRS);
-#endif
-
static inline int mips_pcibios_iack(void)
{
int irq;
#endif
}
-static void malta_ipi_irqdispatch(void)
+static irqreturn_t i8259_handler(int irq, void *dev_id)
{
-#ifdef CONFIG_MIPS_GIC_IPI
- unsigned long irq;
- DECLARE_BITMAP(pending, GIC_NUM_INTRS);
-
- gic_get_int_mask(pending, ipi_ints);
-
- irq = find_first_bit(pending, GIC_NUM_INTRS);
-
- while (irq < GIC_NUM_INTRS) {
- do_IRQ(MIPS_GIC_IRQ_BASE + irq);
-
- irq = find_next_bit(pending, GIC_NUM_INTRS, irq + 1);
- }
-#endif
- if (gic_compare_int())
- do_IRQ(MIPS_GIC_IRQ_BASE);
+ malta_hw0_irqdispatch();
+ return IRQ_HANDLED;
}
static void corehi_irqdispatch(void)
die("CoreHi interrupt", regs);
}
+static irqreturn_t corehi_handler(int irq, void *dev_id)
+{
+ corehi_irqdispatch();
+ return IRQ_HANDLED;
+}
+
static inline int clz(unsigned long x)
{
__asm__(
irq = irq_ffs(pending);
- if (irq == MIPSCPU_INT_I8259A)
- malta_hw0_irqdispatch();
- else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
- malta_ipi_irqdispatch();
+ /* HACK: GIC doesn't properly dispatch local interrupts yet */
+ if (gic_present && irq == MIPSCPU_INT_GIC && gic_compare_int())
+ do_IRQ(MIPS_GIC_IRQ_BASE);
else
do_IRQ(MIPS_CPU_IRQ_BASE + irq);
}
do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
}
-#endif /* CONFIG_MIPS_MT_SMP */
-
-#ifdef CONFIG_MIPS_GIC_IPI
-
-#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3
-#define GIC_MIPS_CPU_IPI_CALL_IRQ 4
-
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
{
#ifdef CONFIG_MIPS_VPE_APSP_API_CMP
.flags = IRQF_PERCPU,
.name = "IPI_call"
};
-#endif /* CONFIG_MIPS_GIC_IPI */
-
-static int gic_resched_int_base;
-static int gic_call_int_base;
-#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
-#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
-
-unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
-{
- return GIC_CALL_INT(cpu);
-}
-
-unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
-{
- return GIC_RESCHED_INT(cpu);
-}
+#endif /* CONFIG_MIPS_MT_SMP */
static struct irqaction i8259irq = {
- .handler = no_action,
+ .handler = i8259_handler,
.name = "XT-PIC cascade",
.flags = IRQF_NO_THREAD,
};
static struct irqaction corehi_irqaction = {
- .handler = no_action,
+ .handler = corehi_handler,
.name = "CoreHi",
.flags = IRQF_NO_THREAD,
};
static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
-/*
- * This GIC specific tabular array defines the association between External
- * Interrupts and CPUs/Core Interrupts. The nature of the External
- * Interrupts is also defined here - polarity/trigger.
- */
-
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-#define X GIC_UNUSED
-
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
- { X, X, X, X, 0 },
- { X, X, X, X, 0 },
- { X, X, X, X, 0 },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { X, X, X, X, 0 },
- { X, X, X, X, 0 },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { X, X, X, X, 0 },
- /* The remainder of this table is initialised by fill_ipi_map */
-};
-#undef X
-
-#ifdef CONFIG_MIPS_GIC_IPI
-static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
-{
- int intr = baseintr + cpu;
- gic_intr_map[intr].cpunum = cpu;
- gic_intr_map[intr].pin = cpupin;
- gic_intr_map[intr].polarity = GIC_POL_POS;
- gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
- gic_intr_map[intr].flags = 0;
- ipi_map[cpu] |= (1 << (cpupin + 2));
- bitmap_set(ipi_ints, intr, 1);
-}
-
-static void __init fill_ipi_map(void)
-{
- int cpu;
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
- fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
- fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
- }
-}
-#endif
-
void __init arch_init_ipiirq(int irq, struct irqaction *action)
{
setup_irq(irq, action);
void __init arch_init_irq(void)
{
+ int corehi_irq, i8259_irq;
+
init_i8259_irqs();
if (!cpu_has_veic)
msc_nr_irqs);
}
- if (cpu_has_veic) {
- set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
- set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
- setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
- setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
- } else if (cpu_has_vint) {
- set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
- set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
- &corehi_irqaction);
- } else {
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
- setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
- &corehi_irqaction);
- }
-
if (gic_present) {
- /* FIXME */
int i;
-#if defined(CONFIG_MIPS_GIC_IPI)
- gic_call_int_base = GIC_NUM_INTRS -
- (NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids;
- gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
- fill_ipi_map();
-#endif
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
- ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC,
+ MIPS_GIC_IRQ_BASE);
if (!mips_cm_present()) {
/* Enable the GIC */
i = REG(_msc01_biu_base, MSC01_SC_CFG);
(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
pr_debug("GIC Enabled\n");
}
-#if defined(CONFIG_MIPS_GIC_IPI)
- /* set up ipi interrupts */
- if (cpu_has_vint) {
- set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
- set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
- }
- /* Argh.. this really needs sorting out.. */
- pr_info("CPU%d: status register was %08x\n",
- smp_processor_id(), read_c0_status());
- write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
- pr_info("CPU%d: status register now %08x\n",
- smp_processor_id(), read_c0_status());
- write_c0_status(0x1100dc00);
- pr_info("CPU%d: status register frc %08x\n",
- smp_processor_id(), read_c0_status());
- for (i = 0; i < nr_cpu_ids; i++) {
- arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
- GIC_RESCHED_INT(i), &irq_resched);
- arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
- GIC_CALL_INT(i), &irq_call);
- }
-#endif
+ i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
+ corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
} else {
#if defined(CONFIG_MIPS_MT_SMP)
/* set up ipi interrupts */
arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
#endif
+ if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_I8259A,
+ malta_hw0_irqdispatch);
+ set_vi_handler(MSC01E_INT_COREHI,
+ corehi_irqdispatch);
+ i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A;
+ corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
+ } else {
+ i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A;
+ corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
+ }
}
+
+ setup_irq(i8259_irq, &i8259irq);
+ setup_irq(corehi_irq, &corehi_irqaction);
}
void malta_be_init(void)
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <asm/gic.h>
+#include <asm/mips-boards/sead3int.h>
+
struct resource ehci_resources[] = {
{
.start = 0x1b200000,
.flags = IORESOURCE_MEM
},
{
- .start = MIPS_CPU_IRQ_BASE + 2,
.flags = IORESOURCE_IRQ
}
};
static int __init ehci_init(void)
{
+ if (gic_present)
+ ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
+ else
+ ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
return platform_device_register(&ehci_device);
}
static unsigned long sead3_config_reg;
-/*
- * This table defines the setup for each external GIC interrupt. It is
- * indexed by interrupt number.
- */
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
- { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
- { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-};
-
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
(current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
if (gic_present)
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
- ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
+ MIPS_GIC_IRQ_BASE);
}
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
+#include <asm/gic.h>
+#include <asm/mips-boards/sead3int.h>
+
static struct smsc911x_platform_config sead3_smsc911x_data = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
-struct resource sead3_net_resourcess[] = {
+struct resource sead3_net_resources[] = {
{
.start = 0x1f010000,
.end = 0x1f01ffff,
.flags = IORESOURCE_MEM
},
{
- .start = MIPS_CPU_IRQ_BASE + 6,
.flags = IORESOURCE_IRQ
}
};
.dev = {
.platform_data = &sead3_smsc911x_data,
},
- .num_resources = ARRAY_SIZE(sead3_net_resourcess),
- .resource = sead3_net_resourcess
+ .num_resources = ARRAY_SIZE(sead3_net_resources),
+ .resource = sead3_net_resources
};
static int __init sead3_net_init(void)
{
+ if (gic_present)
+ sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
+ else
+ sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
return platform_device_register(&sead3_net_device);
}
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define UART(base, int) \
+#include <asm/gic.h>
+#include <asm/mips-boards/sead3int.h>
+
+#define UART(base) \
{ \
.mapbase = base, \
- .irq = int, \
+ .irq = -1, \
.uartclk = 14745600, \
.iotype = UPIO_MEM32, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
}
static struct plat_serial8250_port uart8250_data[] = {
- UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */
- UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */
+ UART(0x1f000900), /* ttyS0 = USB */
+ UART(0x1f000800), /* ttyS1 = RS232 */
{ },
};
static int __init uart8250_init(void)
{
+ if (gic_present) {
+ uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
+ uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
+ } else {
+ uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
+ uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
+ }
return platform_device_register(&uart8250_device);
}
*/
#include <linux/bitmap.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
unsigned int gic_frequency;
unsigned int gic_present;
unsigned long _gic_base;
-unsigned int gic_irq_base;
unsigned int gic_irq_flags[GIC_NUM_INTRS];
-
-/* The index into this array is the vector # of the interrupt. */
-struct gic_shared_intr_map gic_shared_intr_map[GIC_NUM_INTRS];
+unsigned int gic_cpu_pin;
struct gic_pcpu_mask {
DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
static DEFINE_SPINLOCK(gic_lock);
static struct irq_domain *gic_irq_domain;
+static void __gic_irq_dispatch(void);
+
#if defined(CONFIG_CSRC_GIC) || defined(CONFIG_CEVT_GIC)
cycle_t gic_read_count(void)
{
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr);
}
-static void gic_eic_irq_dispatch(void)
-{
- unsigned int cause = read_c0_cause();
- int irq;
-
- irq = (cause & ST0_IM) >> STATUSB_IP2;
- if (irq == 0)
- irq = -1;
-
- if (irq >= 0)
- do_IRQ(gic_irq_base + irq);
- else
- spurious_interrupt();
-}
-
static void __init vpe_local_setup(unsigned int numvpes)
{
unsigned long timer_intr = GIC_INT_TMR;
GIC_MAP_TO_PIN_MSK | timer_intr);
if (cpu_has_veic) {
set_vi_handler(timer_intr + GIC_PIN_TO_VEC_OFFSET,
- gic_eic_irq_dispatch);
- gic_shared_intr_map[timer_intr + GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_TIMER_MSK;
+ __gic_irq_dispatch);
}
if (vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK)
GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP),
GIC_MAP_TO_PIN_MSK | perf_intr);
if (cpu_has_veic) {
- set_vi_handler(perf_intr + GIC_PIN_TO_VEC_OFFSET, gic_eic_irq_dispatch);
- gic_shared_intr_map[perf_intr + GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_PERFCNT_MSK;
+ set_vi_handler(perf_intr + GIC_PIN_TO_VEC_OFFSET,
+ __gic_irq_dispatch);
}
}
}
#endif
};
-static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
- unsigned int pin, unsigned int polarity, unsigned int trigtype,
- unsigned int flags)
+static void __gic_irq_dispatch(void)
{
- struct gic_shared_intr_map *map_ptr;
- int i;
-
- /* Setup Intr to Pin mapping */
- if (pin & GIC_MAP_TO_NMI_MSK) {
- int i;
+ unsigned int intr, virq;
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin);
- /* FIXME: hack to route NMI to all cpu's */
- for (i = 0; i < NR_CPUS; i += 32) {
- GICWRITE(GIC_REG_ADDR(SHARED,
- GIC_SH_MAP_TO_VPE_REG_OFF(intr, i)),
- 0xffffffff);
- }
- } else {
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)),
- GIC_MAP_TO_PIN_MSK | pin);
- /* Setup Intr to CPU mapping */
- GIC_SH_MAP_TO_VPE_SMASK(intr, cpu);
- if (cpu_has_veic) {
- set_vi_handler(pin + GIC_PIN_TO_VEC_OFFSET,
- gic_eic_irq_dispatch);
- map_ptr = &gic_shared_intr_map[pin + GIC_PIN_TO_VEC_OFFSET];
- if (map_ptr->num_shared_intr >= GIC_MAX_SHARED_INTR)
- BUG();
- map_ptr->intr_list[map_ptr->num_shared_intr++] = intr;
- }
+ while ((intr = gic_get_int()) != GIC_NUM_INTRS) {
+ virq = irq_linear_revmap(gic_irq_domain, intr);
+ do_IRQ(virq);
}
+}
- /* Setup Intr Polarity */
- GIC_SET_POLARITY(intr, polarity);
+static void gic_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+ __gic_irq_dispatch();
+}
+
+#ifdef CONFIG_MIPS_GIC_IPI
+static int gic_resched_int_base;
+static int gic_call_int_base;
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+ return gic_resched_int_base + cpu;
+}
- /* Setup Intr Trigger Type */
- GIC_SET_TRIGGER(intr, trigtype);
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+ return gic_call_int_base + cpu;
+}
- /* Init Intr Masks */
- GIC_CLR_INTR_MASK(intr);
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+ scheduler_ipi();
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+ smp_call_function_interrupt();
+
+ return IRQ_HANDLED;
+}
- /* Initialise per-cpu Interrupt software masks */
+static struct irqaction irq_resched = {
+ .handler = ipi_resched_interrupt,
+ .flags = IRQF_PERCPU,
+ .name = "IPI resched"
+};
+
+static struct irqaction irq_call = {
+ .handler = ipi_call_interrupt,
+ .flags = IRQF_PERCPU,
+ .name = "IPI call"
+};
+
+static __init void gic_ipi_init_one(unsigned int intr, int cpu,
+ struct irqaction *action)
+{
+ int virq = irq_create_mapping(gic_irq_domain, intr);
+ int i;
+
+ GIC_SH_MAP_TO_VPE_SMASK(intr, cpu);
for (i = 0; i < NR_CPUS; i++)
clear_bit(intr, pcpu_masks[i].pcpu_mask);
set_bit(intr, pcpu_masks[cpu].pcpu_mask);
- if ((flags & GIC_FLAG_TRANSPARENT) && (cpu_has_veic == 0))
- GIC_SET_INTR_MASK(intr);
- if (trigtype == GIC_TRIG_EDGE)
- gic_irq_flags[intr] |= GIC_TRIG_EDGE;
+ irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+
+ irq_set_handler(virq, handle_percpu_irq);
+ setup_irq(virq, action);
}
-static void __init gic_basic_init(int numintrs, int numvpes,
- struct gic_intr_map *intrmap, int mapsize)
+static __init void gic_ipi_init(void)
{
- unsigned int i, cpu;
- unsigned int pin_offset = 0;
+ int i;
+
+ /* Use last 2 * NR_CPUS interrupts as IPIs */
+ gic_resched_int_base = GIC_NUM_INTRS - nr_cpu_ids;
+ gic_call_int_base = gic_resched_int_base - nr_cpu_ids;
+
+ for (i = 0; i < nr_cpu_ids; i++) {
+ gic_ipi_init_one(gic_call_int_base + i, i, &irq_call);
+ gic_ipi_init_one(gic_resched_int_base + i, i, &irq_resched);
+ }
+}
+#else
+static inline void gic_ipi_init(void)
+{
+}
+#endif
+
+static void __init gic_basic_init(int numintrs, int numvpes)
+{
+ unsigned int i;
board_bind_eic_interrupt = &gic_bind_eic_interrupt;
GIC_SET_POLARITY(i, GIC_POL_POS);
GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL);
GIC_CLR_INTR_MASK(i);
- if (i < GIC_NUM_INTRS) {
+ if (i < GIC_NUM_INTRS)
gic_irq_flags[i] = 0;
- gic_shared_intr_map[i].num_shared_intr = 0;
- gic_shared_intr_map[i].local_intr_mask = 0;
- }
- }
-
- /*
- * In EIC mode, the HW_INT# is offset by (2-1). Need to subtract
- * one because the GIC will add one (since 0=no intr).
- */
- if (cpu_has_veic)
- pin_offset = (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET);
-
- /* Setup specifics */
- for (i = 0; i < mapsize; i++) {
- cpu = intrmap[i].cpunum;
- if (cpu == GIC_UNUSED)
- continue;
- gic_setup_intr(i,
- intrmap[i].cpunum,
- intrmap[i].pin + pin_offset,
- intrmap[i].polarity,
- intrmap[i].trigtype,
- intrmap[i].flags);
}
vpe_local_setup(numvpes);
spin_lock_irqsave(&gic_lock, flags);
GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(hw)),
- GIC_MAP_TO_PIN_MSK | 0);
+ GIC_MAP_TO_PIN_MSK | gic_cpu_pin);
/* Map to VPE 0 by default */
GIC_SH_MAP_TO_VPE_SMASK(hw, 0);
set_bit(hw, pcpu_masks[0].pcpu_mask);
};
void __init gic_init(unsigned long gic_base_addr,
- unsigned long gic_addrspace_size,
- struct gic_intr_map *intr_map, unsigned int intr_map_size,
+ unsigned long gic_addrspace_size, unsigned int cpu_vec,
unsigned int irqbase)
{
unsigned int gicconfig;
_gic_base = (unsigned long) ioremap_nocache(gic_base_addr,
gic_addrspace_size);
- gic_irq_base = irqbase;
GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig);
numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >>
GIC_SH_CONFIG_NUMVPES_SHF;
numvpes = numvpes + 1;
+ if (cpu_has_veic) {
+ /* Always use vector 1 in EIC mode */
+ gic_cpu_pin = 0;
+ set_vi_handler(gic_cpu_pin + GIC_PIN_TO_VEC_OFFSET,
+ __gic_irq_dispatch);
+ } else {
+ gic_cpu_pin = cpu_vec - GIC_CPU_PIN_OFFSET;
+ irq_set_chained_handler(MIPS_CPU_IRQ_BASE + cpu_vec,
+ gic_irq_dispatch);
+ }
+
gic_irq_domain = irq_domain_add_simple(NULL, GIC_NUM_INTRS, irqbase,
&gic_irq_domain_ops, NULL);
if (!gic_irq_domain)
panic("Failed to add GIC IRQ domain");
- gic_basic_init(numintrs, numvpes, intr_map, intr_map_size);
+ gic_basic_init(numintrs, numvpes);
+
+ gic_ipi_init();
}
projects / karo-tx-linux.git / commitdiff